Size-Dependent Isovalent Impurity Doping for Ambipolar Control in Cu3N.

Substitutional doping, involving the replacement of a host with an aliovalent impurity ion, is widely used to attain ambipolar controllability in semiconductors, which is crucial for device application. However, its effectiveness for p-type doping is limited in monovalent cation compounds due to the lack of suitable aliovalent (i.e., zerovalent) impurities. We propose an alternative approach for p- and n-type doping, mediated by the sizes of isovalent alkali metal impurities in Cu(I)-based semiconductors, such as copper nitride with an electron concentration of ∼1015 cm-3. Doping of isovalent Li with a smaller size to interstitial positions improves n-type conductivity, and electron concentration is controllable in the range of 1015 to 1018 cm-3. In contrast, larger isovalent Cs and Rb impurities facilitate p-type conversion, resulting in a hole concentration controllability of 1014 to 1017 cm-3. First-principles calculations indicate that Li is placed as an interstitial impurity acting as a shallow donor in conjunction with the formation of a neutral impurity on Cu defects. As the impurity size increases beyond the capacity of the vacant space, the formation of multiple acceptor-type Cu vacancies is enhanced owing to the repulsion between host Cu+ and Cs+/Rb+ impurities. Consequently, the Cs or Rb impurity is located at the sites of the N accompanied by six neighboring Cu vacancies, forming acceptor defect complexes. This size-dependent isovalent impurity doping scheme opens up an alternative avenue for advancement in optoelectronic devices using monovalent cation-based semiconductors.

Precious-Metal-Free Mo-MXene Catalyst Enabling Facile Ammonia Synthesis Via Dual Sites Bridged by H-Spillover.

To date, NH3 synthesis under mild conditions is largely confined to precious Ru catalysts, while nonprecious metal (NPM) catalysts are confronted with the challenge of low catalytic activity due to the inverse relationship between the N2 dissociation barrier and NHx (x = 1-3) desorption energy. Herein, we demonstrate NPM (Co, Ni, and Re)-mediated Mo2CTx MXene (where Tx denotes the OH group) to achieve efficient NH3 synthesis under mild conditions. In particular, the NH3 synthesis rate over Re/Mo2CTx and Ni/Mo2CTx can reach 22.4 and 21.5 mmol g-1 h-1 at 400 °C and 1 MPa, respectively, higher than that of NPM-based catalysts and Cs-Ru/MgO ever reported. Experimental and theoretical studies reveal that Mo4+ over Mo2CTx has a strong ability for N2 activation; thus, the rate-determining step is shifted from conventional N2 dissociation to NH2* formation. NPM is mainly responsible for H2 activation, and the high reactivity of spillover hydrogen and electron transfer from NPM to the N-rich Mo2CTx surface can efficiently facilitate nitrogen hydrogenation and the subsequent desorption of NH3. With the synergistic effect of the dual active sites bridged by H-spillover, the NPM-mediated Mo2CTx catalysts circumvent the major obstacle, making NH3 synthesis under mild conditions efficient.

Quadrupling the depairing current density in the iron-based superconductor SmFeAsO1-xHx.

Iron-based 1111-type superconductors display high critical temperatures and relatively high critical current densities Jc. The typical approach to increasing Jc is to introduce defects to control dissipative vortex motion. However, when optimized, this approach is theoretically predicted to be limited to achieving a maximum Jc of only ∼30% of the depairing current density Jd, which depends on the coherence length and the penetration depth. Here we dramatically boost Jc in SmFeAsO1-xHx films using a thermodynamic approach aimed at increasing Jd and incorporating vortex pinning centres. Specifically, we reduce the penetration depth, coherence length and critical field anisotropy by increasing the carrier density through high electron doping using H substitution. Remarkably, the quadrupled Jd reaches 415 MA cm-2, a value comparable to cuprates. Finally, by introducing defects using proton irradiation, we obtain high Jc values in fields up to 25 T. We apply this method to other iron-based superconductors and achieve a similar enhancement of current densities.

Exploration of heterogeneous catalyst for molecular hydrogen ortho-para conversion.

Molecular hydrogen (H2) ortho-para conversion (O/P conversion) proceeds slowly at low temperatures accompanying a heat release. Thus, catalysts for accelerating this conversion rate are highly demanded in terms of the storage and utilization of liquid H2. The catalysts for this purpose are experimentally screened by examining a broad range of materials covering magnetic, non-magnetic, metallic, and nonmetallic oxides. The primary conclusions obtained are summarized below. (1) active materials are required to be non-metallic and to bear the cations with ionic radii smaller than the bond length of H2. (2) Metallic materials have almost no activity irrespective of with or without magnetism (3) The activity of materials belonging to (1) is largely enhanced when the constituting cation has a magnetic moment. In addition, there is a class of materials for which the activity is distinctly enhanced just upon substitution by the foreign ions.

Ammonia decomposition mediated at nitrogen vacancies on NaCl-type binary metal nitrides supporting transition metal nanoparticles.

The ability of NaCl-type binary transition metal nitrides (incorporating La, Ce, Y, Zr or Hf) to act as catalytic supports facilitating ammonia decomposition was examined. The effect of nitrogen vacancies formed on nitrides can be understood in terms of the ionic radii of the metal cations. A clear correlation between the N2 desorption temperature and catalytic activity was found.

Discovery of Self-Assembled 2D Ru/Si Superlattices Boosting Hydrogen Evolution.

2D heterostructuring is a versatile methodology for designing nanoarchitecture catalytic systems that allow for reconstruction and modulation of interfaces and electronic structures. However, catalysts with such structures are extremely scarce due to limited synthetic strategies. Here, a highly ordered 2D Ru/Si/Ru/Si… nano-heterostructures (RSHS) is reported by acid etching of the LaRuSi electride. RSHS shows a superior electrocatalytic activity for hydrogen evolution with an overpotential of 14 mV at 10 mA cm-2 in alkaline media. Both experimental analysis and first-principles calculations demonstrate that the electronic states of Ru can be tuned by strong interactions of the interfacial Ru-Si, leading to an optimized hydrogen adsorption energy. Moreover, due to the synergistic effect of Ru and Si, the energy barrier of water dissociation is significantly reduced. The well-organized superlattice structure will provide a paradigm for construction of efficient catalysts with tunable electronic states and dual active sites.

Approach to Low Contact Resistance Formation on Buried Interface in Oxide Thin-Film Transistors: Utilization of Palladium-Mediated Hydrogen Pathway.

Amorphous oxide semiconductors (AOSs) with low off-currents and processing temperatures offer promising alternative materials for next-generation high-density memory devices. The complex vertical stacking process of memory devices significantly increases the probability of encountering internal contact issues. Conventional surface treatment methods developed for planar devices necessitate efficient approaches to eliminate contact issues at deep internal interfaces in the nanoscale complex structures of AOS devices. In this work, we report the pioneering use of palladium thin film as a high-efficiency active hydrogen transfer pathway from the outside to the internal contact interface via low-temperature postannealing in the H2 atmosphere, and the formation of highly conductive metallic interlayer effectively solves the contact issues at the deeply buried interfaces in devices. The application of this method reduced the contact resistance of Pd electrodes/amorphous indium-gallium-zinc oxide (a-IGZO) thin-film by 2 orders of magnitude, and thereby the mobility of thin-film transistor was increased from 3.2 cm2 V-1 s-1 to nearly 20 cm2 V-1 s-1, preserving an excellent bias stress stability. This technology has wide applicability for the solution of contact resistance issues in oxide semiconductor devices with complex architectures.

Dipole Coupling Accelerated H2 O Dissociation by Magnesium-Based Intermetallic Catalysts.

The water (H2 O) dissociation is critical for various H2 O-associated reactions, including water gas shift, hydrogen evolution reaction and hydrolysis corrosion. While the d-band center concept offers a catalyst design guideline for H2 O activation, it cannot be applied to intermetallic or main group elements-based systems because Coulomb interaction was not considered. Herein, using hydrolysis corrosion of Mg as an example, we illustrate the critical role of the dipole of the intermetallic catalysts for H2 O dissociation. The H2 O dissociation kinetics can be enhanced using Mgx Mey (Me=Co, Ni, Cu, Si and Al) as catalysts, and the hydrogen generation rate of Mg2 Ni-loaded Mg reached 80 times as high as Ni-loaded Mg. The adsorbed H2 O molecules strongly couple with the Mg-Me dipole of Mgx Mey , lowering the H2 O dissociation barrier. The dipole-based H2 O dissociation mechanism is applicable to non-transition metal-based systems, such as Mg2 Si and Mg17 Al12 , offering a flexible catalyst design strategy for controllable H2 O dissociation.

Polaronic Nonlinear Optical Response and All-Optical Switching Based on an Ionic Metal Oxide.

It has been well-established that light-matter interactions, as manifested by diverse linear and nonlinear optical (NLO) processes, are mediated by real and virtual particles, such as electrons, phonons, and excitons. Polarons, often regarded as electrons dressed by phonons, are known to contribute to exotic behaviors of solids, from superconductivity to photocatalysis, while their role in materials' NLO response remains largely unexplored. Here, the NLO response mediated by polarons supported by a model ionic metal oxide, TiO2, is examined. It is observed that the formation of polaronic states within the bandgap results in a dramatic enhancement of NLO absorption coefficient by over 130 times for photon energies in the sub-bandgap regions, characterized by a 100 fs scale ultrafast response that is typical for thermalized electrons in metals. The ultrafast polaronic NLO response is then exploited for the development of all-optical switches for ultrafast pulse generation in near-infrared (NIR) fiber lasers and modulation of optical signal in the telecommunication band based on evanescent interaction on a planar waveguide chip. These results suggest that the polarons supported by dielectric ionic oxides can fill the gaps left by dielectric and metallic materials and serve as a novel platform for nonlinear photonic applications.

Inverse-Perovskite Ba3 BO (B = Si and Ge) as a High Performance Environmentally Benign Thermoelectric Material with Low Lattice Thermal Conductivity.

High energy-conversion efficiency (ZT) of thermoelectric materials has been achieved in heavy metal chalcogenides, but the use of toxic Pb or Te is an obstacle for wide applications of thermoelectricity. Here, high ZT is demonstrated in toxic-element free Ba3 BO (B = Si and Ge) with inverse-perovskite structure. The negatively charged B ion contributes to hole transport with long carrier life time, and their highly dispersive bands with multiple valley degeneracy realize both high p-type electronic conductivity and high Seebeck coefficient, resulting in high power factor (PF). In addition, extremely low lattice thermal conductivities (κlat ) 1.0-0.4 W m-1  K-1 at T = 300-600 K are observed in Ba3 BO. Highly distorted O-Ba6 octahedral framework with weak ionic bonds between Ba with large mass and O provides low phonon velocities and strong phonon scattering in Ba3 BO. As a consequence of high PF and low κlat , Ba3 SiO (Ba3 GeO) exhibits rather high ZT = 0.16-0.84 (0.35-0.65) at T = 300-623 K (300-523 K). Finally, based on first-principles carrier and phonon transport calculations, maximum ZT is predicted to be 2.14 for Ba3 SiO and 1.21 for Ba3 GeO at T = 600 K by optimizing hole concentration. Present results propose that inverse-perovskites would be a new platform of environmentally-benign high-ZT thermoelectric materials.

Preface to Special Issue on Sustainable Ammonia Synthesis.

In this Editorial, Guest Editors Douglas R. MacFarlane, Egill Skúlason, Hideo Hosono and Minhua Shao discuss the newly emerging field of electrochemical nitrogen reduction reaction (NRR) in the Special Issue of ChemSusChem on Sustainable Ammonia Synthesis.

BaTiO3-xNy: Highly Basic Oxide Catalyst Exhibiting Coupling of Electrons at Oxygen Vacancies with Substituted Nitride Ions.

The base strength of oxide catalysts is controlled by the electron charge distribution between cations and anions, with unsaturated oxygen ions that have lone pair electrons typically acting as basic sites. Substitution of oxide ions with anions that have different valences, such as nitride and hydride ions, can often generate basic sites. It is plausible that electrons trapped at oxygen vacancy sites could provide increased electron density and shift the highest occupied molecular orbital energy levels of anions upward in the case that the oxygen vacancies couple with surface-substituted anions. The present work demonstrates that high catalytic basicity can be obtained via site-selective doping of anions at face-sharing Ti2O9 dimer sites with oxygen vacancies in BaTiO3-x. This improved basicity stems from the coupling of substituted nitride ions to electrons at oxygen vacancies. The oxynitride BaTiO3-xNy was found to contain nitride ions that have increased electronic charge density on the basis of such interactions. Enhanced surface basicity following doping with nitride ion was also confirmed by CO2 temperature-programmed desorption and infrared spectroscopy in conjunction with the adsorption of CHCl3. The strong Lewis base sites resulting from the formation of the oxynitride evidently facilitated the catalytic activation of C-H bonds to promote Knoevenagel condensation reactions between aldehydes and active methylene compounds with pKa values of up to 28.9.

Ammonia Synthesis over Fe-Supported Catalysts Mediated by Face-Sharing Nitrogen Sites in BaTiO3-x Ny Oxynitride.

Invited for this Issue's cover is the group of Professor Hideo Hosono at Tokyo Institute of Technology. The Cover image explores the question which activation dominates N2 activation for ammonia synthesis. The Research Article itself is available at 10.1002/cssc.202300551.

A 2D Ba2N Electride for Transition Metal-Free N2 Dissociation under Mild Conditions.

N2 activation is a key step in the industrial synthesis of ammonia and other high-value-added N-containing chemicals, and typically is heavily reliant on transition metal (TM) sites as active centers to reduce the large activation energy barrier for N2 dissociation. In the present work, we report that a 2D electride of Ba2N with anionic electrons in the interlayer spacings works efficiently for TM-free N2 dissociation under mild conditions. The interlayer electrons significantly boost N2 dissociation with a very small activation energy of 35 kJ mol-1, as confirmed by the N2 isotopic exchange reaction. The reaction of anionic electrons with N2 molecules stabilizes (N2)2- anions, the so-called diazenide, in the large interlayer space (∼4.5 Å) sandwiched by 2 cationic slabs of Ba2N as the main intermediate.

Ammonia Cracking Catalyzed by Ni Nanoparticles Confined in the Framework of CeO2 Support.

For the extraction of hydrogen from ammonia at low temperatures, we investigated Ni-based catalysts fabricated by the thermal decomposition of RNi5 intermetallics (R = Ce or Y). The interconnected microstructure formed via phase separation between the Ni catalyst and the resulting oxide support was observed to evolve via low-temperature thermal decomposition of RNi5. The resulting Ni/CeO2 nanocomposite exhibited superior catalytic activity of ∼25% at 400 °C for NH3 cracking. The high catalytic activity was attributed to the interlocking of Ni nanoparticles with the CeO2 framework. The growth of Ni nanoparticles was prevented by this interconnected microstructure, in which the Ni nanoparticles incorporated nitrogen owing to the size effect, whereas Ni does not commonly form nitrides. To the best of our knowledge, this is a unique example of a microstructure that enhances catalytic NH3 cracking.

Multiple reaction pathway on alkaline earth imide supported catalysts for efficient ammonia synthesis.

The tunability of reaction pathways is required for exploring efficient and low cost catalysts for ammonia synthesis. There is an obstacle by the limitations arising from scaling relation for this purpose. Here, we demonstrate that the alkali earth imides (AeNH) combined with transition metal (TM = Fe, Co and Ni) catalysts can overcome this difficulty by utilizing functionalities arising from concerted role of active defects on the support surface and loaded transition metals. These catalysts enable ammonia production through multiple reaction pathways. The reaction rate of Co/SrNH is as high as 1686.7 mmol·gCo-1·h-1 and the TOFs reaches above 500 h-1 at 400 °C and 0.9 MPa, outperforming other reported Co-based catalysts as well as the benchmark Cs-Ru/MgO catalyst and industrial wüstite-based Fe catalyst under the same reaction conditions. Experimental and theoretical results show that the synergistic effect of nitrogen affinity of 3d TMs and in-situ formed NH2- vacancy of alkali earth imides regulate the reaction pathways of the ammonia production, resulting in distinct catalytic performance different from 3d TMs. It was thus demonstrated that the appropriate combination of metal and support is essential for controlling the reaction pathway and realizing highly active and low cost catalysts for ammonia synthesis.

Topological insulator as an efficient catalyst for oxidative carbonylation of amines.

Topological materials have received much attention because of their robust topological surface states, which can be potentially applied in electronics and catalysis. Here, we show that the topological insulator bismuth selenide functions as an efficient catalyst for the oxidative carbonylation of amines with carbon monoxide and dioxygen to synthesize urea derivatives. For example, the carbonylation of butylamine can be completed over bismuth selenide nanoparticle catalyst in 4 hours at 20°C with a yield of 99%, whereas most noble metal-based catalysts do not function at such a low temperature. Density functional theory calculations further reveal that the topological surface states facilitate the activation of dioxygen through a triplet-to-singlet spin-conversion reaction, in which active oxygen species are formed with a barrier of 0.4 electron volts for the subsequent reactions with amine and carbon monoxide.

Ammonia Synthesis on Ternary LaSi-based Electrides: Tuning the Catalytic Mechanism by the Third Metal.

Intermetallic electrides have recently drawn considerable attention due to their unique electronic structure and high catalytic performance for the activation of inert chemical bonds under mild conditions. However, the relationship between electride (anionic) electron abundance and catalytic performance is undefined; the key deciding factor for the performance of intermetallic electride catalysts remains to be addressed. Here, the secret behind electride catalysts La-TM-Si (TM=Co, Fe and Mn) with the same crystal structure but different anionic electrons was studied. Unexpectedly, LaCoSi with the least anionic electrons showed the best catalytic activity. The experiments and first-principles calculations showed that the electride anions promote the N2 dissociation which alters the rate-determining step (RDS) for ammonia synthesis on the studied electrides. Different reaction mechanisms were found for La-TM-Si (TM=Fe, Co) and LaMnSi. A dual-site module was revealed for LaCoSi and LaFeSi, in which transition metals were available for the N2 dissociation and La accelerates the NHx formation, respectively, breaking the Sabatier scaling relation. For LaMnSi, which is the most efficient for the N2 activation, the activity for ammonia synthesis is limited and confined by the scaling relations. The findings provide new insight into the working mechanism of intermetallic electrides.