Asunto(s)
Sustancias para la Guerra Química , Cooperación Internacional , Política Pública , Cooperación Internacional/legislación & jurisprudencia , Política Pública/legislación & jurisprudencia , Política Pública/tendencias , Sustancias para la Guerra Química/legislación & jurisprudencia , Sustancias para la Guerra Química/provisión & distribución , Confianza , Medidas de Seguridad/tendenciasRESUMEN
In November 2019, for the first time in the history of the Chemical Weapons Convention, changes were made to Schedule 1 of the Annex on Chemicals. While there is little in the scientific literature regarding any of these newly scheduled chemicals, the carbamates, specifically, prove to be substantially different, both in terms of their chemical composition and their toxicological effects, from all the other scheduled nerve agents and have yet to be fully reported on in the literature. Herein, we present a literature review of the available information on carbamates included in Schedule 1, as well as analogous other carbamates, and provide a summary of their utility and function as cholinesterase inhibitors in general and their toxicities. Though there is a paucity of studies in the literature related to the detection of these newly scheduled quaternary and bisquaternary carbamates and/or their biomarkers, information available on carbamate pesticides may be a solid starting point to further postulate amenable detection methodologies. Lastly, we note some implications of these newly scheduled carbamates for the nonproliferation and disarmament community.
Asunto(s)
Agentes Nerviosos , Plaguicidas , Carbamatos/toxicidad , Inhibidores de la Colinesterasa/toxicidad , Plaguicidas/toxicidadRESUMEN
Blister agents damage the skin, eyes, mucous membranes and subcutaneous tissues. Other toxic effects may occur after absorption. The response of the Scientific Advisory Board (SAB) of the Organisation for the Prohibition of Chemical Weapons (OPCW) to a request from the OPCW Director-General in 2013 on the status of medical countermeasures and treatments to blister agents is updated through the incorporation of the latest information. The physical and toxicological properties of sulfur mustard and clinical effects and treatments are summarised. The information should assist medics and emergency responders who may be unfamiliar with the toxidrome of sulfur mustard and its treatment.
Asunto(s)
Sustancias para la Guerra Química/envenenamiento , Gas Mostaza/envenenamiento , Animales , Humanos , Contramedidas MédicasRESUMEN
Cohesive Hamaker constants of solid materials are measured via optical and dielectric properties (i.e., Lifshitz theory), inverse gas chromatography (IGC), and contact angle measurements. To date, however, a comparison across these measurement techniques for common energetic materials has not been reported. This has been due to the inability of the community to produce samples of energetic materials that are readily compatible with contact angle measurements. Here we overcome this limitation by using physical vapor deposition to produce thin films of five common energetic materials, and the contact angle measurement approach is applied to estimate the cohesive Hamaker constants and surface energy components of the materials. The cohesive Hamaker constants range from 85zJ to 135zJ across the different films. When these Hamaker constants are compared to prior work using Lifshitz theory and nonpolar probe IGC, the relative magnitudes can be ordered as follows: contact angle>Lifshitz>IGC. Furthermore, the dispersive surface energy components estimated here are in good agreement with those estimated by IGC. Due to these results, researchers and technologists will now have access to a comprehensive database of adhesion constants which describe the behavior of these energetic materials over a range of settings.
RESUMEN
We use electroabsorption spectroscopy to measure the change in built-in potential (VBI) across the polymer photoactive layer in diodes where indium tin oxide electrodes are systematically modified using dipolar phosphonic acid self-assembled monolayers (SAMs) with various dipole moments. We find that VBI scales linearly with the work function (Φ) of the SAM-modified electrode over a wide range when using a solution-coated poly(p-phenylenevinylene) derivative as the active layer. However, we measure an interfacial parameter of S = eΔVBI/ΔΦ < 1, suggesting that these ITO/SAM/polymer interfaces deviate from the Schottky-Mott limit, in contrast to what has previously been reported for a number of ambient-processed organic-on-electrode systems. Our results suggest that the energetics at these ITO/SAM/polymer interfaces behave more like metal/organic interfaces previously studied in UHV despite being processed from solution.
RESUMEN
The interface between an organic semiconductor and a transparent conducting oxide is crucial to the performance of organic optoelectronics. We use microcontact printing to pattern pentafluorobenzyl phosphonic acid self-assembled monolayers (SAMs) on indium tin oxide (ITO). We obtain high-fidelity patterns with sharply defined edges and with large work function contrast (comparable to that obtained from phosphonic acid SAMs deposited from solution).
Asunto(s)
Organofosfonatos/química , Semiconductores , Compuestos de Estaño/química , Electrónica/instrumentación , Electrónica/métodos , Diseño de Equipo , Propiedades de SuperficieRESUMEN
Transparent metal oxides, in particular, indium tin oxide (ITO), are critical transparent contact materials for applications in next-generation organic electronics, including organic light emitting diodes (OLEDs) and organic photovoltaics (OPVs). Understanding and controlling the surface properties of ITO allows for the molecular engineering of the ITO-organic interface, resulting in fine control of the interfacial chemistries and electronics. In particular, both surface energy matching and work function compatibility at material interfaces can result in marked improvement in OLED and OPV performance. Although there are numerous ways to change the surface properties of ITO, one of the more successful surface modifications is the use of monolayers based on organic molecules with widely variable end functional groups. Phosphonic acids (PAs) are known to bind strongly to metal oxides and form robust monolayers on many different metal oxide materials. They also demonstrate several advantages over other functionalizing moieties such as silanes or carboxylic acids. Most notably, PAs can be stored in ambient conditions without degradation, and the surface modification procedures are typically robust and easy to employ. This Account focuses on our research studying PA binding to ITO, the tunable properties of the resulting surfaces, and subsequent effects on the performance of organic electronic devices. We have used surface characterization techniques such as X-ray photoelectron spectroscopy (XPS) and infrared reflection adsorption spectroscopy (IRRAS) to determine that PAs bind to ITO in a predominantly bidentate fashion (where two of three oxygen atoms from the PA are involved in surface binding). Modification of the functional R-groups on PAs allows us to control and tune the surface energy and work function of the ITO surface. In one study using fluorinated benzyl PAs, we can keep the surface energy of ITO relatively low and constant but tune the surface work function. PA modification of ITO has resulted in materials that are more stable and more compatible with subsequently deposited organic materials, an effective work function that can be tuned by over 1 eV, and energy barriers to hole injection (OLED) or hole-harvesting (OPV) that can be well matched to the frontier orbital energies of the organic active layers, leading to better overall device properties.
RESUMEN
The electrical stability of low-voltage organic transistors based on phosphonic acid self-assembled monolayer (SAM) dielectrics is investigated using four different semiconductors. The threshold voltage shift in these devices shows a stretched-exponential time dependence under continuous gate bias with a relaxation time in the range of 10(3)-10(5) s, at room temperature. Differences in the bias instability of transistors based on different self-assembled monolayers and organic semiconductors suggest that charge trapping into localized states in the semiconductor is not the only mechanism responsible for the observed instability. By applying 1-5 s long programming voltage pulses of 2-3 V in amplitude, a large reversible threshold voltage shift can be produced. The retention time of the programmed state was measured to be on the order of 30 h. The combination of low voltage operation and relatively long retention times makes these devices interesting for ultra-low power memory applications.
Asunto(s)
Membranas Artificiales , Nanoestructuras/química , Transistores Electrónicos , Estructura Molecular , Organofosfonatos/química , Semiconductores , EstereoisomerismoRESUMEN
The dielectric permittivity and electric breakdown strength of nanocomposites comprising poly(vinylidene fluoride-co-hexafluoro propylene) and phosphonic acid surface-modified BaTiO(3) nanoparticles have been investigated as a function of the volume fraction of nanoparticles. The mode of binding of pentafluorobenzylphosphonic acid on the BaTiO(3) particles was investigated using infrared and (31)P solid-state nuclear magnetic resonance spectroscopy, and the phosphonic acid was found to form well ordered, tightly bound monolayers. The effective permittivity of nanocomposites with low volume fractions (<50%) was in good agreement with standard theoretical models, with a maximum relative permittivity of 35. However, for nanoparticle volume fractions of greater than 50%, the effective permittivity was observed to decrease with increasing nanoparticle volume fraction, and this was correlated with an increase in porosity of the spin-coated nanocomposite films. The dielectric breakdown strength was also found to decrease with increasing volume fraction of the BaTiO(3) nanoparticles, with an abrupt decrease observed around 10% and a gradual decrease for volume fractions of 20-50%. Comparison of these results with model calculations, using statistical particle packing simulations and effective medium theory for the permittivity and breakdown strength, indicates the important roles of nanoparticle percolation and porosity of the nanocomposites on the dielectric properties. The measured energy density at a field strength of 164 V/mum, well below the breakdown strength, increased to a value of 3.2 J/cm(3) as the nanoparticle volume fraction is increased to 50%, roughly in line with the trend of the permittivity. The calculated maximum energy densities indicate maximal extractable energy (7-8 J/cm(3) at 1 kHz) for two different particle volume fractions, as a result of the interplay of the dependencies of permittivity and breakdown strength on volume fraction.
Asunto(s)
Compuestos de Bario/química , Electricidad , Nanocompuestos/química , Polivinilos/química , Titanio/química , Impedancia Eléctrica , Halogenación , Ligandos , Espectroscopía de Resonancia Magnética , Ácidos Fosfóricos/química , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de Superficie , TermogravimetríaRESUMEN
The new uranyl phosphate [(UO2)3(PO4)O(OH)(H2O)2](H2O) (1) with an unprecedented framework structure has been synthesized at 150 and 185 degrees C. The structure (tetragonal, P4(2)/mbc, a = 14.015(1) A, c = 13.083(2) A, V = 2575.6(4) A(3), Z = 8) contains uranyl phosphate chains composed of uranyl pentagonal and hexagonal bipyramids and phosphate tetrahedra linked by sharing of polyhedral edges. The uranyl phosphate chains are aligned both along [100] and [010] and are linked into a novel framework structure involving channels along [001]. Topologically identical chains occur linked into sheets in more than a dozen uranyl phosphate minerals, but these chains have never been observed in opposing orientations and linked into a framework as in 1.
RESUMEN
Bis-thymine units were used to noncovalently cross-link a complementary diamidopyridine-functionalized copolymer. Upon combination in noncompetitive solvents, discrete micron-scale spherical aggregates were formed arising from specific three-point polymer-cross-linker hydrogen bonding interactions. The diameter of these microspheres could be controlled through spacer structure. The cross-linking process was fully thermally reversible, with complete dissolution observed at 50 degrees C and reformation of the aggregates upon return to ambient temperature. This process could be repeated multiply, with lower particle dispersity observed arising from the annealing process.
RESUMEN
We have explored the interactions of mono- and multivalent guests with Recognition-Induced Polymersomes (RIPs) formed from complementary random copolymers featuring diamidopyridine and thymine functionality. Addition of monovalent guests featuring imide functionality to these RIPs induced a temporary swelling of the vesicles, followed by dissociation of the vesicles due to competitive binding of the guest. Conversely, multivalent thymine-functionalized nanoparticle guests were rapidly incorporated into the RIPs, inducing a contraction of RIP diameter over time. These mono- and multivalent interactions were extremely specific: highly analogous control systems showed no interaction with the RIP structures. Taken together, these studies demonstrate highly selective molecular "lock and key" control over higher-order assembly and recognition processes.