Nonconjugated Polymers Enabled Solar Water Oxidation.

Wholly distinct from conjugated polymers which are featured by generic charge transfer capability stemming from a conjugated molecular structure, solid nonconjugated polymers mediated charge transport has long been deemed as theoretically impossible because of the deficiency of π electrons along the molecular skeleton, thereby retarding their widespread applications in solar energy conversion. Herein, we first conceptually unveil that intact encapsulation of metal oxides (e.g., TiO2, WO3, Fe2O3, and ZnO) with an ultrathin nonconjugated polyelectrolyte of branched polyethylenimine (BPEI) can unexpectedly accelerate the unidirectional charge transfer to the active sites and foster the defect generation, which contributes to the boosted charge separation and prolonged charge lifetime, ultimately resulting in considerably improved photoelectrochemical (PEC) water oxidation activities. The interfacial charge transport origins endowed by BPEI adornment are elucidated, which include acting as a hole-withdrawing mediator, promoting vacancy generation, and stimulating the directional charge flow route. We additionally ascertain that such charge transport characteristics of BPEI are universal. This work would unlock the charge transfer capability of nonconjugated polymers for solar water oxidation. The nonconjugated insulating polymer was utilized as a charge transport mediator for boosting charge migration and separation over metal oxides toward solar water oxidation.

Homogeneous Age-hardening of Large-sized Al-Sc Foams via Micro-alloying with Zr and Ti.

Al-based foams have drawn increasing attention from industry due to their integration of structure and functional properties. However, large-sized Al-based foams still cannot be homogeneously strengthened by long-time aging due to their low thermal conductivity. In this study, we proposed an age-hardening approach that was applied in large-sized Al-0.16Sc-0.17Zr (wt.%) foams via micro-alloying with Zr and Ti compared with Al-0.21Sc foams; it not only achieved homogeneous strength by long-term aging but also reduced the cost of the alloy by substituting Zr and Ti for the more expensive Sc content. The results show that the Al3(Sc, Zr, Ti) phase with a core-shell structure as a crucial precipitation strengthening phase by micro-alloying with Zr and Ti was less prone to coarsening after a prolonged aging heat treatment. Therefore, the yielding strength of Al-Sc foam micro-alloying with Zr and Ti remained almost unchanged after a maximum aging time of 1440 h due to less coarsening precipitate, which is consistent with the results of mechanical experiments. These findings provide a new way for the heat treatment strengthening of large-sized Al-based foams, thus promoting their industrial applications.

Excitation-Selective and Double-Emissive Lead-Free Binary Hybrid Metal Halides for White Light-Emitting Diode and X-Ray Scintillation.

Zero-dimensional (0D) organic metal halides comprising heterogeneous metal cations in single phase can achieve multiple luminous emissions enabling them toward multifunctional light-emitting applications. Herein, A novel single crystal of (C8H20N)4SbMnCl9 containing two luminescent centers of [SbCl5]2- pentahedrons and [MnCl4]2- tetrahedrons is reported. The large distance between Sb-Sb, Mn-Mn, and Sb-Mn as well as theory calculation indicate negligible interaction between individual centers, thus endowing (C8H20N)4SbMnCl9 with excitation-dependable and efficient luminescence. Under near-UV excitation, only orange emission originates from self-trapped excitons recombination in [SbCl5]2- pentahedron occurs with photoluminescence quantum yield (PLQY) of 91.5%. Under blue-light excitation, only green emission originating from 4T1-6A1 transition of Mn2+ in [MnCl4]2- tetrahedrons occurs with PLQY of 66.8%. Interestingly, upon X-ray illumination, both emissions can be fully achieved due to the high-energy photon absorption. Consequently, (C8H20N)4SbMnCl9 is employed as phosphors to fabricate white light-emitting diodes optically pumped by n-UV chip and blue-chip thanks to its excitation-dependable property. Moreover, it also shows promising performance as X-ray scintillator with low detection limit of 60.79 nGyair S-1, steady-state light yield ≈54% of commerical scintillaotr LuAG:Ce, high resolution of 13.5 lp mm-1 for X-ray imaging. This work presents a new structural design to fabricate 0D hybrids with multicolor emissions.

Deletion of the novel gene mother cell lysis X results in Cry1Ac encapsulation in the Bacillus thuringiensis HD73.

The novel protein MclX (mother cell lysis X) in Bacillus thuringiensis subsp. kurstaki strain HD73 (B. thuringiensis HD73) was characterized in this work. MclX has no known domain and its gene deletion in HD73 resulted in Cry1Ac encapsulation in the mother cell and did not influence Cry1Ac protein production or insecticidal activity. In vitro cell wall hydrolysis experiments showed that MclX cannot hydrolyze the cell wall. In mclX deletion mutants, the expression of cwlC (which encodes a key cell wall hydrolase) was significantly decreased, as shown by the ß-galactosidase activity assay. MclX cannot directly bind to the cwlC promoter, based on the electrophoretic mobility shift assay (EMSA). The cwlC was reported to be regulated by σK and GerE. However, the transcriptional activities of sigK and gerE showed no difference between HD73 and the mclX deletion mutant. It is indicated that MclX influenced cwlC expression independently of σK or GerE, through a new pathway to regulate cwlC expression. mclX deletion could be a new approach for insecticidal protein encapsulation in Bacillus thuringiensis.

[Structural Design and Finite Element Analysis of New Type Posterior Integral Glaucoma Valve].

The treatment of refractory Glaucoma is a difficult problem in clinical ophthalmology. For refractory glaucoma patients with hyphema, shallow anterior chamber, anterior conglutination of peripheral chamber angle, corneal endothelium dystrophy or decompensated, at present, there is no effective treatment. In order to solve this problem, a new type posterior integral glaucoma valve with IOP control device was designed using medical titanium alloy, and the valve model was established by Abaqus software, and the stiffness and preload of the valve were analyzed by finite element method. The results showed that the opening and closing of the valve were controlled automatically by the pressure difference between the front and back of the valve, and the opening and flow rate of the valve increase dynamically with the increase of intraocular pressure, and finally reached the set ideal IOP value of steady state.

The Transcription Factor CpcR Determines Cell Fate by Modulating the Initiation of Sporulation in Bacillus thuringiensis.

Bacillus thuringiensis is a bacterium capable of differentiating into a spore, a dormant and highly resistant cellular form. During the sporulation process, this bacterium produces insecticidal toxins in the form of a crystal inclusion, usually in the sporulating cell. We previously reported that the B. thuringiensis LM1212 strain can differentiate into two distinct subpopulations of sporeformers and crystal producers and that this division-of-labor phenotype provides the bacterium with a fitness advantage in competition with a typical B. thuringiensis strain. The transcription factor CpcR was characterized as the regulator responsible for this phenotype. Here, we examined how CpcR interacts with the sporulation network to control the cell differentiation. We found that the sporulation process was inhibited prior to polar septum formation and that Spo0A activity was impaired in the presence of cpcR in strain LM1212. Using bioinformatics and genetic tools, we identified a gene positively controlled by CpcR encoding a putative phosphatase of the Spo0E family known to specifically dephosphorylate phosphorylated Spo0A (Spo0A-P). We showed that this protein (called Spo0E1) is a negative regulator of sporulation and that variations in spo0E1 expression can modulate the production of spores. Using fluorescent reporters to follow gene expression at the single-cell level, we correlated expression of cpcR and sporulation genes to the formation of the two differentiated subpopulations. IMPORTANCE Formation of spores is a paradigm for study of cell differentiation in prokaryotes. Sporulation initiation is governed by a gradual increase in the level and activity of the master regulator Spo0A. Spo0A is usually indirectly phosphorylated by a multicomponent phosphorelay, and modulation of this phosphorelay system is a critical aspect of Bacillus physiology. Though we know that this phosphorelay system is usually affected by two negative regulatory mechanisms, i.e., rap genes and spo0E family genes, the regulatory mechanisms controlling the transcription of these genes are poorly understood. Here, we report that the transcription factor CpcR positively regulates a spo0E family gene and that variations in spo0E expression can modulate the production of spores in B. thuringiensis. This work emphasizes the diversity in modes of sporulation and illustrates the diversity in the strategies employed by bacteria to control this differentiation pathway and ensure their survival.

Precisely Modulating the Photosensitization Efficiency of Transition-Metal Chalcogenide Quantum Dots toward Solar Water Oxidation.

Precisely modulating the spatial charge migration/separation constitutes the central issue in dictating the solar conversion efficiency of photoelectrochemical (PEC) cells, whereas it still remains a grand challenge. Here, we conceptually demonstrate the construction of hierarchically ordered metal oxide (MO)/transition-metal chalcogenide quantum dots (TMC QDs) multilayered heterostructured photoanodes, that is, MO/[TMC QDs(+)/TMC QDs(-)]n (TMC QDs: CdTe, CdSe, CdS), by a simple and general bottom-up self-assembly route. Tailor-made intrinsically oppositely charged TMC QDs are alternately deposited on the highly ordered MO via a generic ligand-triggered electrostatic interaction to craft heterostructured photoanodes. The charge-transfer pathway stimulated by the photosensitization of TMC QDs is finely tuned by the assembly sequence. The advantageous multilayered nanoarchitecture renders the MO/[TMC QDs(+)/TMC QDs(-)]n photoanodes exhibit substantially enhanced PEC performances under light irradiation, owing to the applicable energy-level configuration and peculiar combination fashion between building blocks and considerably boosted interfacial charge separation resulting from generating spatial tandem charge transport. Furthermore, photosensitization efficiency comparison among TMC QDs is comprehensively performed with PEC mechanisms elucidated.

Identification and Functional Characterization of Two Homologous SpoVS Proteins Involved in Sporulation of Bacillus thuringiensis.

Sporulation is an important part of the life cycle of Bacillus thuringiensis and the basis for the production of parasporal crystals. This study identifies and characterizes two homologous spoVS genes (spoVS1 and spoVS2) in B. thuringiensis, both of whose expression is dependent on the σH factor. The disruption of spoVS1 and spoVS2 resulted in defective B. thuringiensis sporulation. Similar to Bacillus subtilis, B. thuringiensis strain HD(ΔspoVS1) mutants showed delayed formation of the polar septa, decreased sporulation efficiency, and blocked spore release. Different from B. subtilis, B. thuringiensis HD(ΔspoVS1) mutants had disporic septa and failed to complete engulfment in some cells. Moreover, HD(ΔspoVS2) mutants had delayed spore release. The effect of spoVS1 deletion on polar septum delay and sporulation efficiency could be compensated by spoVS2. ß-Galactosidase activity analysis showed that the expression of pro-sigE and spoIIE decreased to different degrees in the HD(ΔspoVS1) and HD(ΔspoVS2) mutants. The different effects of the two mutations on the expression of sporulation genes led to decreases in Cry1Ac production of different levels. IMPORTANCE There is only one spoVS gene in B. subtilis, and its effects on sporulation have been reported. In this study, two homologous spoVS genes were found and identified in B. thuringiensis. The different effects on sporulation and parasporal crystal protein production in B. thuringiensis and their relationship were investigated. We found that these two homologous spoVS genes are highly conserved in the Bacillus cereus group, and therefore, the functional characterization of SpoVS is helpful to better understand the sporulation processes of members of the Bacillus cereus group.

Unexpected Boosted Solar Water Oxidation by Nonconjugated Polymer-Mediated Tandem Charge Transfer.

Conjugated polymers are deemed as conductive carrier mediators for engendering the π electrons along the molecular framework, while the role of nonconjugated insulated polymers has been generally overlooked without the capability to participate in the solar-powered oxidation-reduction kinetics and charge-transfer process. Alternatively, considering the ultrashort charge lifetime and significant deficiency of metal nanocluster (NC)-based photosystems, the fine tuning of charge migration over atomically precise ultrasmall metal NCs as novel light-harvesting antennas has so far not yet been unleashed. Here, we unlock the charge-transfer capability of a nonconjugated polymer to modulate the charge flow over metal NCs (Aux and Au25) by such a solid-state nonconductive polymer via a conceptually new chemistry strategy by which l-glutathione (GSH)-capped gold (Aux@GSH) NCs and poly(diallyl-dimethylammonium chloride) (PDDA) were alternately self-assembled on the metal oxide (MO: WO3, Fe2O3, and TiO2) substrates. The ultrathin nonconjugated PDDA interim layer periodically intercalated in-between Aux (Au25) NC layers concurrently serves as an unexpected charge-transfer mediator to foster the unidirectional electron flow from Aux(Au25) NCs to MOs by forming a tandem charge-transfer chain, hence endowing the multilayered MO/(PDDA-Aux)n heterostructures with significantly boosted photoelectrochemical water oxidation performance under light irradiation. The unanticipated role of PDDA as a cascade charge mediator is demonstrated to be universal. Our work would unlock the potential charge-transport capability of nonconjugated polymers as a novel charge mediator for solar-to-chemical conversion.

Confinement of Quantum Dots in between Monolayered Graphene Nanosheets for Arousing Boosted Multifarious Photoredox Selective Organic Transformation.

Transition metal chalcogenide quantum dots (TMC QDs) represent promising light-harvesting antennas because of their fascinating physicochemical properties including quantum confinement effect and suitable energy band structures. However, TMC QDs generally suffer from poor photoactivities and photostability due to deficiency of active sites and ultrafast recombination rate of photoinduced charge carriers. Here, we demonstrate how to rationally arouse the charge transfer kinetic of TMC QDs by close monolayered graphene (GR) encapsulation via a ligand-dominated layer-by-layer (LbL) assembly utilizing oppositely charged TMC QDs and GR nanosheets as the building blocks. The assembly units were spontaneously and intimately integrated in an alternate integration mode, thereby resulting in the multilayered three-dimensional (3D) TMC QDs/GR ensembles. It was unveiled that multifarious photoactivities of TMC QDs/GR nanocomposites toward versatile photoredox organic catalysis including photocatalytic aromatic alcohols oxidation to aldehydes and nitroaromatics reduction to amino derivatives under visible light irradiation are conspicuously boosted because of spatially multilayered monolayered GR encapsulation which are superior to those of TMC QDs counterparts. The substantially enhanced photoactivities of TMC QDs/GR nanocomposites arise from reasons including improved light absorption and enhanced charge separation efficacy because of GR encapsulation together with unique stacking mode between TMC QDs and GR endowed by LbL assembly. Our work would provide a promising and efficacious route to smartly accelerate the charge transfer kinetic of TMC QDs for solar energy conversion.

Maneuvering Intrinsic Instability of Metal Nanoclusters for Boosted Solar-Powered Hydrogen Production.

Atomically precise metal nanoclusters (NCs) have recently been unleashed as novel photosensitizers but inevitably suffer from light-induced self-transformation to metal nanocrystals (NYs), leading to substantially reduced photoredox activities. Herein, we conceptually demonstrate how to manipulate the intrinsic instability of metal NCs for smartly crafting long-range cascade charge transfer chain assisted by an ultrathin poly(dialyldimethylammonium chloride) (PDDA) layer that was intercalated at the interface of metal NCs and semiconductor. The unidirectional electron flow endowed by Schottky-type self-transformed metal NYs and unexpected electron-withdrawing capability of PDDA layer concurrently foster the charge transfer cascade, resulting in the markedly enhanced net efficiency of photocatalytic hydrogen evolution performances under visible light irradiation. Our work opens new frontiers for judiciously harnessing the inherent detrimental instability of metal NCs for boosted charge transfer toward solar-to-hydrogen conversion.

General Layer-by-Layer Assembly of Multilayered Photoanodes: Triggering Tandem Charge Transport toward Photoelectrochemical Water Oxidation.

Modulation of photoinduced charge separation/migration and construction of controllable charge transfer pathway over photoelectrodes have been attracting enduring interest in semiconductor-based photoelectrochemical (PEC) cells but suffer from sluggish charge transport kinetics. Here, we report a general approach to fabricate NP-TNTAs/(TMCs QDs/PSS)n (X = Te, Se, S) photoanodes via a facile and green electrostatic layer-by-layer (LbL) self-assembly strategy, for which transition-metal chalcogenides quantum dots (TMCs QDs) [CdX (X = Se, Te, S)] and poly(sodium 4-styrenesulfonate) (PSS) were periodically deposited on the nanoporous TiO2 nanotube arrays (NP-TNTAs) via substantial electrostatic force, resulting in the continuous charge transfer pathway. NP-TNTAs/(TMCs QDs/PSS)n photoanodes demonstrate significantly enhanced solar-driven photoelectrochemical (PEC) water oxidation activities, relative to NP-TNTAs and TMCs QDs under visible and simulated sunlight irradiation, predominantly because of the suitable energy level configuration between NP-TNTAs and TMCs QDs, unique integration mode, and high-speed interfacial charge separation rate endowed by LbL assembly. The ultrathin PSS intermediate layer functions as "molecule glue" for pinpoint and uniform self-assembly of TMCs QDs on the framework of NP-TNTAs and photosensitization effect of TMCs QDs triggers the unidirectional charge transfer cascade, synergistically boosting the charge separation/transfer efficiency. Our work offers an efficacious approach to craft multilayered photoelectrodes and spur further interest in finely tuning the spatial charge flow in PEC cell for solar-to-hydrogen conversion.

Partially Self-Transformed Transition-Metal Chalcogenide Interim Layer: Motivating Charge Transport Cascade for Solar Hydrogen Evolution.

Directional and high-efficiency charge transport to the target active sites of photocatalyst is central to boost the solar energy conversion but is retarded by the sluggish charge transfer kinetics and deficiency of active sites. Here, we report the elaborate design of cascade unidirectional charge transfer channel over spatially multilayered CdS@CdTe@MoS2 dual core-shell ternary heterostructures by partial transformation of CdS to CdTe interim layer followed by seamless encapsulation with an ultrathin MoS2 layer. The suitable energy-level alignment and unique coaxial multilayered assembly mode among the building blocks accelerate the interfacial charge separation and transport, endowing the CdS@CdTe@MoS2 heterostructures with conspicuously enhanced visible-light-driven photocatalytic hydrogen generation performances along with good photostability. The integrated roles of ultrathin CdTe intermediate layer in passivating the defect sites of CdS NWs framework, mediating the unidirectional charge transfer cascade and prolonging the charge lifetime, were ascertained. Besides, the crucial role of the outermost MoS2 layer as the metal-free cocatalyst in enriching the surface active sites for hydrogen evolution was also determined. Our work would provide new alternatives for finely tuning the charge flow toward promising solar-to-hydrogen conversion efficiency.

Precise Tuning of Coordination Positions for Transition-Metal Ions via Layer-by-Layer Assembly To Enhance Solar Hydrogen Production.

Finely tuning the charge transfer constitutes a central challenge in photocatalysis, yet exquisite control of the directional charge transfer to the target reactive sites is hindered by the rapid charge recombination. Herein, dual separated charge transport channels were fabricated in a one-dimensional transition-metal chalcogenide (TMC)-based system via an elaborate layer-by-layer (LbL) self-assembly approach, for which oppositely charged metal-ion-coordinated branched polyethylenimine (BPEI) and MoS2 quantum dots (QDs) were alternately integrated to fabricate the multilayered TMC@(BPEI/MoS2 QDs)n heterostructures with controllable interfaces. Photocatalytic hydrogen generation performances of such ternary heterostructures under visible light irradiation were evaluated, which unravels that the BPEI layer not only behaves as "molecule glue" to enable the electrostatic LbL assembly with MoS2 QDs in an alternate stacking fashion on the TMC frameworks but also acts as a unidirectional hole-transfer channel. More significantly, transition-metal ions (Fe2+, Co2+, Ni2+, Cu2+, and Zn2+) coordinated on the outmost BPEI layer are able to function as interfacial electron transfer mediators for accelerating the interfacial cascade electron transport efficiency. These simultaneously constructed dual high-speed electron and hole-transfer channels are beneficial for boosting the charge separation and enhancing the photocatalytic hydrogen evolution performances.

Self-transformation of ultra-small gold nanoclusters to gold nanocrystals toward boosted photoreduction catalysis.

Glutathione-protected Aux nanoclusters uniformly and intimately embedded at the interface of CdSe QDs and graphene were in situ self-transformed to Au nanocrystals (NCs) via a facile thermal reduction strategy. The inlaid Au NPs substantially accelerate the interfacial directional charge transfer toward multifarious photoreduction catalysis under visible light irradiation.

Suppression of SMOC2 reduces bleomycin (BLM)-induced pulmonary fibrosis by inhibition of TGF-ß1/SMADs pathway.

Although the initiation and modulation of lung fibrosis has been widely investigated, the pathogenesis was not well understood. Secreted modular calcium-binding protein 2 (SMOC2) as the secreted protein acidic is enriched in cysteine (SPARC) family of matricellular proteins, which are important in regulating cell-matrix interactions. Here we aimed to calculate the effects and molecular mechanism of SMOC2 on the progression and severity of lung fibrosis in murine bleomycin (BLM)-induced mice. The pulmonary fibrosis was significantly induced by BLM in wild type (WT) C57BL6 mice, as evidenced by the lung sections histology and collagen accumulation using H&E and Masson Trichrome staining. Notably, SMOC2 knockout (SMOC2-/-) mice treated with BLM exhibited the decrease in inflammation accompanied by the reduction of neutrophils, macrophages and lymphocytes in bronchoalveolar lavage fluids (BALF). In addition, the levels of inflammation-associated cytokines and chemokines induced by BLM were also decreased in BALF obtained from SMOC2-/- mice. Meanwhile, SMOC2-/- suppressed the progression of pulmonary fibrosis, as evidenced by the reduction in levels of transforming growth factor-ß1 (TGF-ß1), α-smooth muscle actin (α-SMA), p-SMAD2 and p-SMAD3 in lung tissue samples. Increasing expression of SMOC2 in TGF-ß1 treated cells were further observed in vitro. Of note, up regulation of SMOC2 activated-fibrosis development in MRC-5 cells, along with increase of α-SMA, p-SMAD2 and p-SMAD3 were determined. In contrast, SMOC2 knockdown reduced TGF-ß1-stimulated expressions of α-SMA, p-SMAD2 and p-SMAD3 in cells. The findings above suggested that SMOC2 knockout contributes to inhibit BLM-induced pulmonary fibrosis.

A 3D architecture composite of porous vanadium nitride nanoribbons and reduced graphene oxide as a high-efficiency counter electrode for dye-sensitized solar cells.

A three-dimensional (3D) porous architecture combining porous vanadium nitride nanoribbons with reduced graphene oxide was prepared through a hydrothermal process and subsequent thermal annealing in an ammonia/argon mixed atmosphere. Then, the obtained 3D porous vanadium nitride nanoribbon/reduced graphene oxide (PVNN/RGO) composite was explored as the counter electrode of dye-sensitized solar cells (DSCs). As evidenced by the electrochemical measurements, the 3D PVNN/RGO composite demonstrates excellent electrocatalytic performance, which is comparable to that of Pt. This can be attributed to the fact that the 3D architecture composite of porous vanadium nitride and reduced graphene oxide can simultaneously provide a favorable electrolyte diffusion channel, a fast electron-transport network, and an abundance of efficient electrocatalytic active sites. By employing such PVNN/RGO composite as the counter electrode, the fabricated DSC can achieve a conversion efficiency of 7.43%, which is comparable to that of the conventional Pt counter electrode (7.74%). Therefore, the 3D PVNN/RGO composite is a promising low-cost alternative to the expensive Pt as a counter electrode in DSCs.

Edge-nitrogenated graphene nanoplatelets as high-efficiency counter electrodes for dye-sensitized solar cells.

Edge-nitrogenated graphene nanoplatelets (ENGNPs) are prepared by a simple and eco-friendly mechanochemical pin-grinding process using flake graphite as the precursor in the presence of nitrogen and investigated as the counter electrodes of dye-sensitized solar cells (DSCs). SEM images and nitrogen adsorption analysis indicate an effective and spontaneous delamination of the pristine graphite into small graphene nanoplatelets by a mechanochemical pin-grinding process. The mechanochemical cracking of the graphitic C-C bond generates activated carbon sites that react directly with nitrogen at the broken edges. The resultant ENGNPs are deposited on a fluorine-doped tin oxide (FTO) substrate by spray coating, and their electrocatalytic activities are investigated systemically in the I(-)/I3(-) redox electrolyte. Electrochemical measurements show that the ENGNP electrode possesses excellent electrocatalytic activity for the redox reaction of I(-)/I3(-) as evidenced by the low charge-transfer resistance at the interface of the electrode and electrolyte. Under 100 mW cm(-2) illumination, the DSC with the optimized ENGNP counter electrode achieves a conversion efficiency of 7.69%, which is comparable to that of the device with Pt counter electrode.