RESUMEN
Photocatalytic reduction of CO2 is a promising strategy to mitigate the effects of global warming by converting CO2 into valuable energy-dense products. Silver bismuth iodide (SBI) is an attractive material owing to its tunable bandgap and favorable band-edge positions for efficient CO2 photoreduction. In this study, SBI materials, including AgBi2I7, AgBiI4, Ag2BiI5, and Ag3BiI6 are first synthesized, through gas-solid reaction by controlling the stoichiometric ratio of reactants. The X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) results revealed that the distance between Ag-I is proportional to the degree of Ag ions delocalization, which occupies the vacant sites. That greatly retards the charge recombination at vacant sites. In addition, the surface potential via photo-assisted Kelvin probe force measurements of various SBI catalysts shows that Ag3BiI6 exhibits the highest surface potential change due to the rich delocalized Ag ions. This results in effective charge carrier transport and prevention of charge recombination at vacant sites. Taking the above advantages, the averaged CO and CH4 production rates for Ag3BiI6 achieved 0.23 and 0.10 µmol g-1 h-1, respectively. The findings suggest that Ag3BiI6 has a high potential as a novel photocatalyst for CO2 reduction and sheds light on the possibility of solving environmental contamination and sustainable energy crises.
RESUMEN
Human-exhaled breath mainly contains water, oxygen, carbon dioxide, and endogenous gases closely related to human metabolism. The linear relationship between breath acetone and blood glucose concentration has been revealed when monitoring diabetes patients. Considerable attention has been directed toward developing a highly sensitive volatile organic compounds (VOCs) sensing material that can detect breath acetone. In this study, we propose a tungsten oxide/tin oxide/silver/poly (methyl methacrylate) (WO3/SnO2/Ag/PMMA) sensing material fabricated using the electrospinning technique. By monitoring the evolution of sensing materials' extinction spectra, low concentrations of acetone vapor can be detected. Moreover, the interfaces between SnO2 and WO3 nanocrystals construct n-n junctions, which generate more electron-hole pairs than those without such structure when the light strikes. This helps to improve the sensitivity of sensing materials when they are subjected to acetone surroundings. The established sensing materials (WO3/SnO2/Ag/PMMA) exhibit a sensing limit of 20 ppm for acetone vapor and show specificity for acetone even in ambient humidity.
RESUMEN
A Z-scheme heterojunction with spatially separated cocatalysts is proposed for overcoming fundamental issues in photocatalytic water splitting, such as inefficient light absorption, charge recombination, and sluggish reaction kinetics. For efficient light absorption and interfacial charge separation, Z-scheme organic/inorganic heterojunction photocatalysts are synthesized by firmly immobilizing ultrathin g-C3 N4 on the surface of TiO2 hollow spheres via electrostatic interactions. Additionally, two cocatalysts, Pt and IrOx , are spatially separated along the Z-scheme charge-transfer pathway to enhance surface charge separation and reaction kinetics. The as-prepared Pt/g-C3 N4 /TiO2 /IrOx (PCTI) hollow sphere photocatalyst exhibits an exceptional H2 evolution rate of 8.15 mmol h-1 g-1 and a remarkable apparent quantum yield of 24.3% at 330 nm in the presence of 0.5 wt% Pt and 1.2 wt% IrOx cocatalysts on g-C3 N4 and TiO2 , respectively. Photoassisted Kelvin probe force microscopy is used to systematically analyze the Z-scheme charge-transfer mechanism within PCTI. Furthermore, the benefits of spatially separating cocatalysts in the PCTI system are methodically investigated in comparison to randomly depositing them. This work adequately demonstrates that the combination of a Z-scheme heterojunction and spatially separated cocatalysts can be a promising strategy for designing high-performance photocatalytic platforms for solar fuel production.
RESUMEN
High absorption ability and direct bandgap makes lead-based perovskite to acquire high photovoltaic performance. However, lead content in perovskite becomes a double-blade for counterbalancing photovoltaic performance and sustainability. Herein, we develop a methylammonium bismuth iodide (MBI), a perovskite-derivative, to serve as a lead-free light absorber layer. Owing to the short carrier diffusion length of MBI, its film quality is a predominant factor to photovoltaic performance. Several candidates of non-polar solvent are discussed in aspect of their dipole moment and boiling point to reveal the effects of anti-solvent assisted crystallization. Through anti-solvent engineering of toluene, the morphology, crystallinity, and element distribution of MBI films are improved compared with those without toluene treatment. The improved morphology and crystallinity of MBI films promote photovoltaic performance over 3.2 times compared with the one without toluene treatment. The photovoltaic device can achieve 0.26% with minor hysteresis effect, whose hysteresis index reduces from 0.374 to 0.169. This study guides a feasible path for developing MBI photovoltaics.
RESUMEN
Hydrogenated titanium dioxide has attracted intensive research interests in pollutant removal applications due to its high photocatalytic activity. Herein, we demonstrate hydrogenated TiO2 nanofibers (H:TiO2 NFs) with a core-shell structure prepared by the hydrothermal synthesis and subsequent heat treatment in hydrogen flow. H:TiO2 NFs has excellent solar light absorption and photogenerated charge formation behavior as confirmed by optical absorbance, photo-Kelvin force probe microscopy and photoinduced charge carrier dynamics analyses. Photodegradation of various organic dyes such as methyl orange, rhodamine 6G and brilliant green is shown to take place with significantly higher rates on our novel catalyst than on pristine TiO2 nanofibers and commercial nanoparticle based photocatalytic materials, which is attributed to surface defects (oxygen vacancy and Ti3+ interstitial defect) on the hydrogen treated surface. We propose three properties/mechanisms responsible for the enhanced photocatalytic activity, which are: (1) improved absorbance allowing for increased exciton generation, (2) highly crystalline anatase TiO2 that promotes fast charge transport rate, and (3) decreased charge recombination caused by the nanoscopic Schottky junctions at the interface of pristine core and hydrogenated shell thus promoting long-life surface charges. The developed H:TiO2 NFs can be helpful for future high performance photocatalysts in environmental applications.
