Multiscale Anion-Hybrid in Atomic Ni Sites for High-Rate Water Electrolysis: Insights into the Charge Accumulation Mechanism.

Single-atom catalysts, characterized by transition metal-(N/O)4 units on nanocarbon (M-(N/O)4-C), have emerged as efficient performers in water electrolysis. However, there are few guiding principles for accurately controlling the ligand fields of single atoms to further stimulate the catalyst activities. Herein, using the Ni-(N/O)4-C unit as a model, we develop a further modification of the P anion on the outer shells to modulate the morphology of the ligand. The catalyst thus prepared possesses high activity and excellent long-term durability, surpassing commercial Pt/C, RuO2, and currently reported single-atom catalysts. Notably, mechanistic studies demonstrated that the pseudocapacitive feature of multiscale anion-hybrid nanocarbon is considerable at accumulating enough positive charge [Q], contributing to the high oxygen evolution reaction (OER) order (ß) through the rate formula. DFT calculations also indicate that the catalytic activity is decided by the suitable barrier energy of the intermediates due to charge accumulation. This work reveals the activity origin of single atoms on multihybrid nanocarbon, providing a clear experiential formula for designing the electronic configuration of single-atom catalysts to boost electrocatalytic performance.

Thiol-functionalized black carbon as effective and economical materials for Cr(VI) removal: Simultaneous sorption and reduction.

Hazardous Cr(VI) continues to pose critical concerns for environmental and public health, demanding the development of effective remediation methods. In this study, thiol-functionalized black carbon (S-BC) was proposed for Cr(VI) removal by mixing thioglycolic acid (TGA) with black carbon (BC) derived from rice straw residue at 80 °C for 8 h. Using a 1:40 (g mL-1) BC-to-TGA ratio, the resulting S-BC40 sample demonstrated significantly enhanced Cr(VI) sorption capacities of 201.23, 145.78, and 106.60 mg g-1 at pH 3.5, 5.5, and 7.5, surpassing its BC counterpart by 2.0, 2.3, and 2.2 times. Additionally, S-BC40 converted all sorbed Cr into Cr(III) species at pH ≥ 5.5, resulting in an equal distribution of Cr(OH)3 and organic Cr(III) complexes. However, approximately 13% of Cr sorbed on BC remained as Cr(VI) at pH 3.5 and 7.5. Both C-centered and S-centered thiyl radicals might contribute to Cr(VI) reduction; however, sufficient C-S groups replenished via thiol-functionalization was the key for the complete Cr(VI) reduction on S-BC samples as pH ≥ 5.5. Thanks to the exceptional Cr(VI) sorption capacity, affordability, and accessibility, thiol-functionalization stands out as a promising modification method for BC. It presents a distinct opportunity to concurrently achieve the objectives of efficient Cr(VI) remediation and waste recycling.

Accumulation and bio-oxidation of arsenite mediated by thermoacidophilic Cyanidiales: Innate potential biomaterials toward arsenic remediation.

Addressing geogenic and anthropogenic arsenic (As) pollution is critical for environmental health. This study explored arsenite [As(III)] removal using Cyanidiales, particularly Cyanidium caldarium (Cc) and Galdieria partita (Gp), under acidic to neutral pH, and determined As(III) detoxification mechanisms in relation to As speciation and protein secondary structure in Cyanidiales. Regarding As(III) sorption amounts, Cc outperformed Gp, reaching 83.2 mg g-1 of removal at pH 5.0. Wherein, 23.5 % of sorbed As on Cc presented as arsenate [As(V)] complexation with polysaccharides, alongside other predominant species including As(III)-cysteine (41.2 %) and As(III)-polysaccharides (35.3 %) complexes. This suggested that As(III) was directly transported into cells, rather than As(V). Coupled with the formation of As(III)-cysteine complexes within cells, these mechanisms may be key to efficiently accumulating As(III) in Cyanidiales during the 6-h incubation. These results highlight the potential of Cyanidiales for sustainable As(III) remediation and provide new insights into managing As(III) toxicity.

Atomically synergistic Zn-Cr catalyst for iso-stoichiometric co-conversion of ethane and CO2 to ethylene and CO.

Developing atomically synergistic bifunctional catalysts relies on the creation of colocalized active atoms to facilitate distinct elementary steps in catalytic cycles. Herein, we show that the atomically-synergistic binuclear-site catalyst (ABC) consisting of [Formula: see text]-O-Cr6+ on zeolite SSZ-13 displays unique catalytic properties for iso-stoichiometric co-conversion of ethane and CO2. Ethylene selectivity and utilization of converted CO2 can reach 100 % and 99.0% under 500 °C at ethane conversion of 9.6%, respectively. In-situ/ex-situ spectroscopic studies and DFT calculations reveal atomic synergies between acidic Zn and redox Cr sites. [Formula: see text] ([Formula: see text]) sites facilitate ß-C-H bond cleavage in ethane and the formation of Zn-Hδ- hydride, thereby the enhanced basicity promotes CO2 adsorption/activation and prevents ethane C-C bond scission. The redox Cr site accelerates CO2 dissociation by replenishing lattice oxygen and facilitates H2O formation/desorption. This study presents the advantages of the ABC concept, paving the way for the rational design of novel advanced catalysts.

Direct Capturing and Regulating Key Intermediates for High-Efficiency Oxygen Evolution Reactions.

Developing efficient oxygen evolution reaction (OER) electrocatalysts can greatly advance the commercialization of proton exchange membrane (PEM) water electrolysis. However, the unclear and disputed reaction mechanism and structure-activity relationship of OER pose significant obstacles. Herein, the active site and intermediate for OER on AuIr nanoalloys are simultaneously identified and correlated with the activity, through the integration of in situ shell-isolated nanoparticle-enhanced Raman spectroscopy and X-ray absorption spectroscopy. The AuIr nanoalloys display excellent OER performance with an overpotential of only 246 mV to achieve 10 mA cm-2 and long-term stability under strong acidic conditions. Direct spectroscopic evidence demonstrates that * OO adsorbed on IrOx sites is the key intermediate for OER, and it is generated through the O-O coupling of adsorbed oxygen species directly from water, providing clear support for the adsorbate evolution mechanism. Moreover, the Raman information of the * OO intermediate can serve as a universal "in situ descriptor" that can be obtained both experimentally and theoretically to accelerate the catalyst design. It unveils that weakening the interactions of * OO on the catalysts and facilitating its desorption would boost the OER performance. This work deepens the mechanistic understandings on OER and provides insightful guidance for the design of more efficient OER catalysts.

Promotion of S-nitrosation of cysteine by a {Co(NO)2}10 complex.

S-Nitrosothiols (SNOs) serve as endogenous carriers and donors of NO within living cells, releasing nitrosonium ions (NO+), NO, or other nitroso derivatives. In this study, we present a bioinspired {Co(NO)2}10 complex 1 that achieved S-nitrosation towards Cys residues. The incorporation of a ferrocenyl group in 1 allowed for fine-tuning of the nitrosation reaction, taking advantage of the redox ability of Cys residues. Complex 1 was synthesized and characterized, demonstrating its NO translation reactivity. Furthermore, complex 1 successfully converted Cys into S-nitrosocysteine (Cys-SNO), as confirmed by UV-Vis, IR, and XAS spectroscopy. This study presents a promising approach for S-nitrosation of Cys residues for further exploration in the modification of Cys-containing peptides.

Toward controllable and predictable synthesis of high-entropy alloy nanocrystals.

High-entropy alloy (HEA) nanocrystals have attracted extensive attention in catalysis. However, there are no effective strategies for synthesizing them in a controllable and predictable manner. With quinary HEA nanocrystals made of platinum-group metals as an example, we demonstrate that their structures with spatial compositions can be predicted by quantitatively knowing the reduction kinetics of metal precursors and entropy of mixing in the nanocrystals under dropwise addition of the mixing five-metal precursor solution. The time to reach a steady state for each precursor plays a pivotal role in determining the structures of HEA nanocrystals with homogeneous alloy and core-shell features. Compared to the commercial platinum/carbon and phase-separated counterparts, the dendritic HEA nanocrystals with a defect-rich surface show substantial enhancement in catalytic activity and durability toward both hydrogen evolution and oxidation. This quantitative study will lead to a paradigm shift in the design of HEA nanocrystals, pushing away from the trial-and-error approach.

Tailoring Copper Chemical Status and Hydrophobicity of Biomimetic Photocatalytic Films for Carbon Dioxide Conversion.

Naturally hierarchical nanostructures of leaves were successfully replicated on thermally stable polyimide (PI) films to obtain biomimetic substrates for the grafting of p-type semiconductor, cuprous oxide (Cu2O). The chemical states of Cu2O and the hydrophobicity on the photocatalytic films were tunable by altering the process time of ion-exchange or chemical reduction. The obtained photocatalytic films showed activity to photocatalytically convert carbon dioxide (CO2) into carbon monoxide (CO) under visible light illumination. The yield of CO was initially improved with the increasing hydrophobicity on the film but then leveled off. The photocatalytic activity could be further improved by tailoring the amount or composition of copper oxides. An optimum ratio of Cu2O and moderate basicity on the surface, as well as more metallic Cu from the bulk, will achieve more efficient interfacial charge transfer, resulting in a higher CO production rate.

Removal and concurrent reduction of Cr(VI) by thermoacidophilic Cyanidiales: a novel extreme biomaterial enlightened for acidic and neutral conditions.

Thermoacidophilic Cyanidiales maintain a competitive edge in inhabiting extreme environments enriched with metals. Here, species of Cyanidioschyzon merolae (Cm), Cyanidium caldarium (Cc), and Galdieria partita (Gp) were exploited to remove hexavalent chromium [Cr(VI)]. Cm and Gp could remove 168.1 and 93.7 mg g-1 of Cr(VI) at pH 2.0 and 7.0, respectively, wherein 89% and 62% of sorbed Cr on Cm and Gp occurred as trivalent chromium [Cr(III)]. Apart from surface-sorbed Cr(VI), the in vitro Cr(III) bound with polysaccharide and in vivo chromium(III) hydroxide [Cr(OH)3] attested to the reduction capability of Cyanidiales. The distribution of Cr species varied as a function of sorbed Cr amount, yet a relatively consistent proportion of Cr(OH)3, irrespective of Cr sorption capacity, was found only on Cm and Cc at pH 2.0. In conjunction with TXM (transmission X-ray microscopy) images that showed less impaired cell integrity and possible intracellular Cr distribution on Cm and Cc at pH 2.0, the in vivo Cr(OH)3 might be the key to promoting the Cr sorption capacity (≥ 152 mg g-1). Cyanidiales are promising candidates for the green and sustainable remediation of Cr(VI) due to their great removal capacity, the spontaneous reduction under oxic conditions, and in vivo accumulation.

Accelerated water activation and stabilized metal-organic framework via constructing triangular active-regions for ampere-level current density hydrogen production.

Two-dimensional metal-organic frameworks (MOFs) have been explored as effective electrocatalysts for hydrogen evolution reaction (HER). However, the sluggish water activation kinetics and structural instability under ultrahigh-current density hinder their large-scale industrial applications. Herein, we develop a universal ligand regulation strategy to build well-aligned Ni-benzenedicarboxylic acid (BDC)-based MOF nanosheet arrays with S introducing (S-NiBDC). Benefiting from the closer p-band center to the Fermi level with strong electron transferability, S-NiBDC array exhibits a low overpotential of 310 mV to attain 1.0 A cm-2 with high stability in alkaline electrolyte. We speculate the newly-constructed triangular "Ni2-S1" motif as the improved HER active region based on detailed mechanism analysis and structural characterization, and the enhanced covalency of Ni-O bonds by S introducing stabilizes S-NiBDC structure. Experimental observations and theoretical calculations elucidate that such Ni sites in "Ni2-S1" center distinctly accelerate the water activation kinetics, while the S site readily captures the H atom as the optimal HER active site, boosting the whole HER activity.

Cross-redox and simultaneous removal of Cr(VI) and As(III): Influences of Fe(II), Fe(III), oxalic acid, and dissolved organic carbon.

Hexavalent chromium [Cr(VI)] and arsenite [As(III)] are hazardous to both human and ecosystem. While their cross-redox reaction decreases both their toxicities, the interferences from ubiquitous substances like Fe (Fe(II) and Fe(III)) and organic compounds (oxalic acid and soil-extracted dissolved organic carbon (DOC)) on such interaction are rarely reported; thence, inspires the investigation in this study. Results showed that the cross-redox, in the absence of interfering substances, only occurred at pH≤2.0, with reaction orders of 0.676 and 0.783 in respect to the concentration of Cr(VI) and As(III). The pseudo-reaction constant, k', of such reaction was recorded at 0.087 m1.377/(mmol0.459 min). With the addition of Fe(II), the rate of Cr(VI) reduction is promoted in conjunction with suppressed As(III) oxidation. Upon neutralizing to pH 6.0, such reduced Cr can be entirely removed via Fe(II)-assisted adsorption and/or co-precipitation. Meanwhile, the elimination of aqueous As is relatively inferior (36 %), attributed to the largely preserved As(III), which is less susceptible to adsorptive/co-precipitative removal. Unlike Fe(II), Fe(III) did not alter Cr(VI)-As(III) cross-redox path, but triggered high adsorptive and/or co-precipitative removals of Cr and As (90 %). In contrast, both organically-altered systems exhibits plummeted As(III) oxidation, under distinctive mechanisms: oxalic acid competes with As(III) in the redox interactions while DOC reduces As(V) into As(III). Also, DOC would undergo complexion with metals and/or blocked the adsorption or co-precipitation sites, leading to even lower Cr and As precipitation. This study unravelled the interference from ubiquitous species in the co-removal of Cr(VI) and As(III), which provides insightful remediation for heavy metal contaminations.

Stepwise redox changes alter the speciation and mobilization of phosphorus in hydromorphic soils.

Sustainable engineering and management of hydromorphic arable soils need deep knowledge about the redox-mediated interactions between nutrients and soil colloids. Consequently, we examined the redox-mediated interactions of P with metal oxides and organic carbon (OC) in toe-, mid-, and upper-slope arable soils under dynamic redox changes using geochemical (biogeochemical microcosm), spectroscopic (XANES), and molecular (quantum chemical calculations (QCC)) approaches. We controlled the redox potential (EH) in two directions i.e., 1) slowly oxidizing direction (SOD; EH increased from -286 to +564 mV); and 2) slowly reducing direction (SRD; EH decreased from +564 to -148 mV). In the SOD of all soils, P, Fe2+ and OC mobilized at EH ≤ 200 mV, due to the pH decrease from 7.2 to 4.1 and dissolution of Fe-oxyhydroxides/carbonates, as indicated by the decrease of Fe-P and Ca-P determined by P-K-edge-XANES. At EH > 200 mV, P immobilized due to the strong P binding with Fe3+ as suggested by QCC. In the SRD of mid-slope-soil, P immobilized with decreasing EH, due to pH increase and P retention by aromatic carbon and/or precipitation by carbonates, as supported by increase of organic-P and Ca-P. These findings help for management of P in arable soils.

Soil acidification enhances the mobilization of phosphorus under anoxic conditions in an agricultural soil: Investigating the potential for loss of phosphorus to water and the associated environmental risk.

Soil redox potential (EH) and pH are key parameters regulating the solubility and fate of phosphorus (P). However, the impact of soil acidification on the redox-induced mobilization and speciation of P in soils under a wide range of EH values has not been extensively studied. Here, we investigated the mobilization and speciation of P in an acidified agricultural soil at two different pH values (e.g., highly acidic soil; pH = 5.6 and slightly acidic soil; pH = 6.1) compared to the un-acidified soil (control soil; pH = 7.3) under a wide range of EH condition (+459 to -281 mV). The impacts of EH/pH-dependent changes of Fe-Mn oxides, and dissolved organic (DOC) and inorganic (DIC) carbon on P mobilization and speciation were also investigated using geochemical and spectroscopic (X-ray absorption near edge structure) techniques. The concentrations of dissolved P under anoxic conditions increased up to 69.3% in the highly acidic soil compared with the control soil. The decrease of the Fe-P fraction, the decrease of Ferrihydrite-Pads speciation, and the strong linear correlation between the dissolved P and Fe2+ (R2 > 0.85) supports the finding that enhanced P mobilization under anoxic conditions may be attributed to Fe reduction in the highly acidic soil. The concentration of dissolved Fe and P remained low until pH dropped below 6.35 for P and 6.28 for Fe, while a liner increase was found in dissolved Mn accompanying a general trend of pH decrease. This result suggests that the dissolution of reducible Mn under acidic soil conditions was an important factor for enhancing mobilization of dissolved P under anoxic conditions. This trend was due to the low amount of Mn, indirectly speeding up Fe reduction. These results can help to develop management practices to effectively mitigate P export and protect water resources from diffuse P pollution.

Sandwich-Nanostructured n-Cu2O/AuAg/p-Cu2O Photocathode with Highly Positive Onset Potential for Improved Water Reduction.

An n-Cu2O layer formed a high-quality buried junction with p-Cu2O to increase the photovoltage and thus to shift the turn-on voltage positively. Mott-Schottky measurements confirmed that the improvement benefited from a positive shift in flat-band potential. The obtained extremely positive onset potential, 0.8 VRHE in n-Cu2O/AuAg/p-Cu2O, is comparable with measurements from water reduction catalysts. The AuAg alloy sandwiched between the homojunction of n-Cu2O and p-Cu2O improved the photocatalytic performance. This alloy both served as an electron relay and promoted electron-hole pair generation in nearby semiconductors; the charge transfer between n-Cu2O and p-Cu2O in the sandwich structure was measured with X-ray absorption spectra. The proposed sandwich structure can be considered as a new direction for the design of efficient solar-related devices.

Adsorption mechanisms of chromate and phosphate on hydrotalcite: A combination of macroscopic and spectroscopic studies.

Hydrotalcite (HT) is a layered double hydroxide (LDH), which is considered as a potential adsorbent to remove anion contaminants. In this study, adsorption of chromate (CrO4) and phosphate (PO4) on HT was conducted at various pH and temperatures. Related adsorption mechanisms were determined via the isotherm, kinetic, and competitive adsorption studies as well as the Cr K-edge X-ray absorption fine-structure (XAFS) spectroscopy. The maximum adsorption capacities for CrO4 and PO4 on HT were 0.16 and 0.23 mmol g-1. Regarding adsorption kinetics, CrO4 and PO4 adsorption on HT could be well described by the second order model, and the rate coefficient of CrO4 and PO4 on HT decreased significantly with the increasing pH from 5 to 9. The adsorption kinetics for CrO4 and PO4 were divided into fast and slow stages with the boundary at 15 min. This biphasic adsorption behavior might be partially attributed to multiple reactive pathways including anion exchange and surface complexation. Fitting results of Cr K-edge EXAFS analysis showed a direct bonding between CrO4 and Al on HT surfaces. Such a surface complexation appeared to be the rate-limiting step for CrO4 adsorption on HT. By contrast, the diffusion through the hydrated interlayer space of HT was the major rate-limiting step for PO4. This study determined the adsorption behaviors of CrO4 and PO4 on HT, including the initial transfer process and the subsequent adsorption mechanisms. Such information could improve the strategy to use HT as the potential adsorbent for the remediation of anionic pollutants.

Deep-Ultraviolet Photodetectors Based on Epitaxial ZnGa2O4 Thin Films.

A single-crystalline ZnGa2O4 epilayer was successfully grown on c-plane (0001) sapphire substrate by metal-organic chemical vapor deposition. This epilayer was used as a ternary oxide semiconductor for application in high-performance metal-semiconductor-metal photoconductive deep-ultraviolet (DUV) photodetectors (PDs). At a bias of 5 V, the annealed ZnGa2O4 PDs showed better performance with a considerably low dark current of 1 pA, a responsivity of 86.3 A/W, cut-off wavelength of 280 nm, and a high DUV-to-visible discrimination ratio of approximately 107 upon exposure to 230 nm DUV illumination than that of as-grown ZnGa2O4 PDs. The as-grown PDs presented a dark current of 0.5 mA, a responsivity of 2782 A/W at 230 nm, and a photo-to-dark current contrast ratio of approximately one order. The rise time of annealed PDs was 0.5 s, and the relatively quick decay time was 0.7 s. The present results demonstrate that annealing process can reduce the oxygen vacancy defects and be potentially applied in ZnGa2O4 film-based DUV PD devices, which have been rarely reported in previous studies.

Phosphate Removal in Relation to Structural Development of Humic Acid-Iron Coprecipitates.

Precipitation of Fe-hydroxide (FH) critically influences the sequestration of PO4 and organic matter (OM). While coatings of pre-sorbed OM block FH surfaces and decrease the PO4 adsorption capacity, little is known about how OM/Fe coprecipitation influences the PO4 adsorption. We aimed to determine the PO4 adsorption behaviors on humic acid (HA)-Fe coprecipitates in relation to surface and structural characteristics as affected by HA types and C/(C + Fe) ratios using the Fe and P X-ray absorption spectroscopy. With increasing C/(C + Fe) ratios, the indiscernible changes in the proportion of near-surface C for coprecipitates containing HA enriched in polar functional groups implied a relatively homogeneous distribution between C and Fe domains. Wherein PO4 adsorbed on FH dominated the P inventory on coprecipitates, yielding PO4 sorption properties nearly equivalent to that of pure FH. Structural disruptions of FH caused by highly associations with polar functional groups of HA enhanced the C solubilisation. While polar functional groups were limited, coprecipitates consisted of core FH with surface outgrowth of HA. Although surface-attached HA that was vulnerable to solubilisation provided alternatively sites for PO4 via ternary complex formation with Fe bridges, it also blocked FH surfaces, leading to a decrease in PO4 adsorption.

Adsorption of tetracycline on Fe (hydr)oxides: effects of pH and metal cation (Cu2+, Zn2+ and Al3+) addition in various molar ratios.

Iron (Fe) (hydr)oxides control the mobility and bioavailability of tetracycline (TC) in waters and soils. Adsorption of TC on Fe (hydr)oxides is greatly affected by polyvalent metals; however, impacts of molar metal/TC ratios on TC adsorptive behaviours on Fe (hydr)oxides remain unclear. Results showed that maximum TC adsorption on ferrihydrite and goethite occurred at pH 5-6. Such TC adsorption was generally promoted by the addition of Cu2+, Zn2+ and Al3+. The greatest increase in TC adsorption was found in the system with molar Cu/TC ratio of 3 due to the formation of Fe hydr(oxide)-Cu-TC ternary complexes. Functional groups on TC that were responsible for the complexation with Cu2+shifted from phenolic diketone groups at Cu/TC molar ratio < 1 to amide groups at Cu/TC molar ratio ≥ 1. For the addition of Al3+, the complexation only took place with phenolic diketone groups, resulting in the enhanced TC adsorption at a molar Al/TC ratio of 1. However, TC adsorption decreased for Al/TC molar ratio > 1 as excess Al3+ led to the competitive adsorption with Al/TC complexes. For the Zn2+ addition, no significant correlation was found between TC adsorption capacity and molar Zn/TC ratios.

Capacity and recycling of polyoxometalate applied in As(III) oxidation by Fe(II)-Amended zero-valent aluminum.

Arsenic remediation is often initiated by oxidizing As(III) to As(V) to alleviate its toxicity and mobility. Due to the easy availability, zero-valent Al (ZVAl) like Al can was considered as potential alternatives to facilitate As(III) oxidation. This study determined the capability and recycling of polyoxometalate (POM) to catalyze As(III) oxidation in Fe(II)-amended ZVAl systems. POM acquired electrons from ZVAl more effectively at pH 1 than at pH 2. While 76% of the reduced POM [POM(e-)] reacted with O2(g) to generate H2O2 at pH 1, only 60% of POM(e-) was used to produce H2O2 at pH 2. The remaining POM(e-) was oxidized by the generated H2O2. Such additional consumption of POM(e-) and H2O2 led to the incomplete As(III) oxidation in the system without residual ZVAl and emphasized the need for a continuous electron supply from ZVAl to compensate the depletion of POM(e-). After the hydrolyzation at pH 6.0, the XANES data evidenced that not only As(V) but WO4 released from the POM retained on surfaces of Al/Fe hydroxides. The competition for sorption sites on Al/Fe hydroxides between As(V) and WO4 led to the incomplete As removal. Despite the loss of WO4, the POM re-polymerized at pH 1 still showed the comparable capability to catalyze As(III) oxidation with original POM. This study revealed electron transfer pathways from ZVAl to As(III) as catalyzed by POM and evidenced the effective POM recycling after As removal, which lowers the cost of POM application and turns the ZVAl/Fe(II)/POM/O2 system into a practical strategy for As remediation.

Crystal shape controlled H2 storage rate in nanoporous carbon composite with ultra-fine Pt nanoparticle.

This study demonstrates that the hydrogen storage rate (HSR) of nanoporous carbon supported platinum nanocatalysts (NC) is determined by their heterojunction and geometric configurations. The present NC is synthesized in an average particle size of ~1.5 nm by incipient wetness impregnation of Pt4+ at carbon support followed by annealing in H2 ambient at 102-105 °C. Among the steps in hydrogen storage, decomposition of H2 molecule into 2 H atoms on Pt NC surface is the deciding factor in HSR that is controlled by the thickness of Pt NC. For the best condition, HSR of Pt NC in 1~2 atomic layers thick (4.7 µg/g min) is 2.6 times faster than that (1.3 µg/g min) of Pt NC with higher than 3 atomic layers thick.