Effects of Muscle Fatigue and Recovery on the Neuromuscular Network after an Intermittent Handgrip Fatigue Task: Spectral Analysis of Electroencephalography and Electromyography Signals.

Mechanisms underlying exercise-induced muscle fatigue and recovery are dependent on peripheral changes at the muscle level and improper control of motoneurons by the central nervous system. In this study, we analyzed the effects of muscle fatigue and recovery on the neuromuscular network through the spectral analysis of electroencephalography (EEG) and electromyography (EMG) signals. A total of 20 healthy right-handed volunteers performed an intermittent handgrip fatigue task. In the prefatigue, postfatigue, and postrecovery states, the participants contracted a handgrip dynamometer with sustained 30% maximal voluntary contractions (MVCs); EEG and EMG data were recorded. A considerable decrease was noted in EMG median frequency in the postfatigue state compared with the findings in other states. Furthermore, the EEG power spectral density of the right primary cortex exhibited a prominent increase in the gamma band. Muscle fatigue led to increases in the beta and gamma bands of contralateral and ipsilateral corticomuscular coherence, respectively. Moreover, a decrease was noted in corticocortical coherence between the bilateral primary motor cortices after muscle fatigue. EMG median frequency may serve as an indicator of muscle fatigue and recovery. Coherence analysis revealed that fatigue reduced the functional synchronization among bilateral motor areas but increased that between the cortex and muscle.

Biomechanical characteristics of self-expanding sinus stents during crimping and deployment_A comparison between different biomaterials.

Self-expanding sinus stents are often used in functional endoscopic sinus surgery to treat inflamed sinuses. The PROPEL self-expanding sinus stent offers mechanical support to the sinus cavity to prevent restenosis. The stent is made of a bioabsorbable material (PLGA) that disappears after wound healing. However, complications such as foreign body sensation and severe stent migration/expulsion have been reported after implantation. Little is known about the contact characteristics of self-expanding sinus stents from when the stent is crimped into the insertion device through to deployment into the sinus cavity. This current study developed a test platform to analyze the biomechanical behavior of the stent during this process. Three common bioabsorbable materials, PLGA, PCL and Mg alloy, were evaluated to understand how the choice of material affects the biomechanical characteristics of self-expanding sinus stents. The results showed that the material can have a considerable influence on the contact characteristics during crimping and deployment. When crimped, the PLGA and Mg alloy stents showed much higher plastic strain and contact stress than the PCL stent. When deployed, the PCL stent had the largest contact area (4.3 mm2) and the lowest contact pressure (0.1 MPa) on the inner surface of the sinus canal. The results indicate that PCL could be a suitable choice for self-expanding sinus stents. This current study provides a method for observing the biomechanical characteristics of sinus stents during stent crimping and deployment.

Effect of material selection on tibial post stresses in posterior-stabilized knee prosthesis.

AIMS: The material and design of knee components can have a considerable effect on the contact characteristics of the tibial post. This study aimed to analyze the stress distribution on the tibial post when using different grades of polyethylene for the tibial inserts. In addition, the contact properties of fixed-bearing and mobile-bearing inserts were evaluated. METHODS: Three different grades of polyethylene were compared in this study; conventional ultra high molecular weight polyethylene (UHMWPE), highly cross-linked polyethylene (HXLPE), and vitamin E-stabilized polyethylene (VEPE). In addition, tibial baseplates with a fixed-bearing and a mobile-bearing insert were evaluated to understand differences in the contact properties. The inserts were implanted in neutral alignment and with a 10° internal malrotation. The contact stress, von Mises stress, and equivalent plastic strain (PEEQ) on the tibial posts were extracted for comparison. RESULTS: The stress and strain on the tibial post for the three polyethylenes greatly increased when the insert was placed in malrotation, showing a 38% to 56% increase in von Mises stress and a 335% to 434% increase in PEEQ. The VEPE insert had the lowest PEEQ among the three materials. The mobile-bearing design exhibited a lower increase in stress and strain around the tibial posts than the fixed-bearing design. CONCLUSION: Using VEPE for the tibial component potentially eliminates the risk of material permanent deformation. The mobile-bearing insert can help to avoid a dramatic increase in plastic strain around the tibial post in cases of malrotation. The mobility allows the pressure to be distributed on the tibial post and demonstrated lower stresses with all three polyethylenes simulated. Cite this article: Bone Joint Res 2020;9(11):768-777.

Stress distribution of the patellofemoral joint in the anatomic V-shape and curved dome-shape femoral component: a comparison of resurfaced and unresurfaced patellae.

PURPOSE: Whether to resurface the patella in knee replacement remains a controversial issue. The geometrical design of the trochlear groove in the femoral component could play an important role in determining the stress distribution on the patellofemoral joint, but this has not been sufficiently reported on. This study attempted to determine the effect of implant design on contact mechanics by means of a finite element method. METHODS: Two designs, an anatomical V-shape design (VSD) and a dome-shape design (DSD), for the anterior trochlear surface in a contemporary femoral component were chosen for examining the contact characteristics. The use and absence of patella resurfacing was simulated. The stress and strain distribution on the patellar bone and the polyethylene component were calculated for comparison. RESULTS: Without patellar resurfacing, the maximal compressive strain in the patellar bone in the VSD model was about 20 % lower than the DSD model. On the other hand, with resurfacing, the maximal strain for the VSD model was 13.3 % greater than for DSD. Uneven stress distribution at the bone-implant interface was also noted for the two designs. CONCLUSION: The femoral component with a V-shape trochlear groove reduced the compressive strain on the unresurfaced patella. If resurfacing the patella, the femoral component with a curved domed-shape design might reduce the strain in the remaining patellar bone. Uneven stress could occur at the bone-implant interface, so design modifications for improving fixation strength and medialization of the patellar button would be helpful in reducing the risk of peg fracture or loosening. LEVEL OF EVIDENCE: III.

The potential role of strontium ranelate in treating particle-induced osteolysis.

Ultra high molecular weight polyethylene (UHMWPE) wear-particle-induced osteolysis is one of the major issues affecting the long-term survival of total joint prostheses. Currently, there are no effective therapeutic options to prevent osteolysis from occurring. The aim of this study was to evaluate the role of strontium ranelate (SR) in reducing the risk of particle-induced osteolysis. Forty-eight C57BL/6J ultra-high molecular weight polyethylene (UHMWPE) particle-induced murine calvarial osteolysis models were used. The mice were randomized into four groups as: sham (Group 1), UHMWPE particles (Group 2), and SR with UHMWPE particles (Group 3 and Group 4). Groups 1 to 3 were sacrificed at two weeks and group 4 was sacrificed at the fourth week. The skulls were then analyzed with a high-resolution micro-CT. Histological evaluation was then conducted and osteoclast numbers were analyzed for comparison. Based on the micro-CT, percentage bone volume and trabecular thickness were found to be significantly higher in Group 4 than in Group 2 (p<0.001). Osteoclast numbers in SR treated groups (Group 3 and Group 4) were reduced when compared to groups that did not receive SR treatment (Group 2). These results indicated that SR treatment helps to increase bone volume percentage and trabecular thickness and also suppresses osteoclast proliferation. It is suggested that oral SR treatment could serve as an alternative therapy for preventing particle-induced osteolysis.

Patellofemoral kinematics during deep knee flexion after total knee replacement: a computational simulation.

PURPOSE: Actions requiring deep knee flexion, such as kneeling and squatting, are challenging to perform after total knee replacement (TKR), though many manufactures emphasize that their knee prostheses could safely achieve high flexion. Little is known about the patellofemoral kinematics during deep flexion. This study aimed to track the movement of the patella during kneeling and squatting through dynamic computational simulation. METHODS: A validated knee model was used to analyse the patellar kinematics after TKR, including shifting, tilting and rotation. The data were captured from full extension to 135° of knee flexion. For kneeling, an anterior force of 500 N was applied perpendicularly on the tibial tubercle as the knee flexed from 90° to 135°. For squatting, a ground reaction force was applied through the tibia from full extension to 135° of flexion. RESULTS: This study found that patellar shifting and rotation in kneeling were similar to those while squatting. However, during kneeling, the patella had a greater medial tilt and showed signs of abrupt patellar tilt owning to an external force being concentrated on the tibial tubercle. CONCLUSIONS: In terms of squatting and kneeling movements, the latter is a more strenuous action for the patellofemoral joint after TKR due to the high forces acting on the tibial tubercle. It is suggested that overweight patients or those requiring high flexion should try to avoid kneeling to reduce the risk of the polyethylene wear. Further modification of trochlear geometry may be required to accommodate abrupt changes in patellar tilting. LEVEL OF EVIDENCE: II.

Increased risk of QT prolongation associated with atherosclerotic diseases in arseniasis-endemic area in southwestern coast of Taiwan.

Chronic arsenic exposure has been documented to be associated with various cardiovascular diseases. We aimed to investigate 1) the increased risk of QT prolongation in chronic arsenic exposure, and 2) the relationships of cardiac repolarization (QT interval duration) with ischemic heart disease and carotid atherosclerosis. We studied 280 men and 355 women living in the endemic area of arseniasis in southwestern Taiwan. QT intervals in electrocardiogram and carotid intima-media thickness (IMT) by ultrasonography were measured. Ischemic heart disease was diagnosed by history or abnormal electrocardiogram. Significant associations of the corrected QT interval (QTc) duration with ischemic heart disease and carotid intima-medium thickness and plaque were observed after adjustment for various risk factors in the multiple linear regression analysis (all p values <0.05). Three indices of chronic arsenic exposure were all significantly associated with the risk of QTc prolongation showing dose-response relationships (p<0.001). Chronic arsenic exposure was dose-dependently associated with the risk of QTc prolongation. Ischemic heart disease and carotid atherosclerosis were significantly associated with QTc intervals in chronic arsenic exposure. QTc prolongation might be suggested as an early biomarker for ischemic heart disease or carotid atherosclerosis in population with previous exposure to arsenic.

A review of the epidemiologic literature on the role of environmental arsenic exposure and cardiovascular diseases.

Cardiovascular disease is the leading cause of mortality worldwide. Arsenic is a ubiquitous metalloid in the crust of the earth. Chronic arsenic poisoning is becoming an emerging epidemic in Asia. Epidemiological studies have shown that chronic arsenic poisoning through ingestion of arsenic-contaminated water is associated with various cardiovascular diseases in dose-response relationships. These cardiovascular disorders include carotid atherosclerosis detected by ultrasonography, impaired microcirculation, prolonged QT interval and increased QT dispersion in electrocardiography, and clinical outcomes such as hypertension, blackfoot disease (a unique peripheral vascular disease endemic in southwestern Taiwan), coronary artery disease and cerebral infarction. Chronic arsenic poisoning is an independent risk factor for cardiovascular disease. The adverse cardiovascular effects of long-term arsenic exposure may be persistent and/or irreversible. Arsenic-induced cardiovascular diseases in human population may result from the interaction among genetic, environment and nutritional factors. The major adverse cardiovascular effect of chronic arsenic poisoning has been established qualitatively and quantitatively in the high arsenic exposure areas, but the low-dose effect of arsenic on cardiovascular diseases remains to be explored. Cardiovascular death is the major cause of mortality worldwide, and a small increased risk may imply a large quantity of excess mortality.

Biomarkers of exposure, effect, and susceptibility of arsenic-induced health hazards in Taiwan.

Long-term exposure to inorganic arsenic from drinking water has been documented to induce cancers and vascular diseases in a dose-response relationship. A series of molecular environmental epidemiological studies have been carried out to elucidate biomarkers of exposure, effect, and susceptibility for arsenic-related health hazards in Taiwan. Arsenic levels in urine, hair, and nail are biomarkers for short-term (<1 year) internal dose, skin hyperpigmentation and palmoplantar hyperkeratosis are for long-term (many years) internal dose, and percentage of monomethylarsonic acid in total metabolites of inorganic arsenic in urine may be considered as an exposure marker for biologically effective dose. The biomarkers of early biological effects of ingested inorganic arsenic included blood levels of reactive oxidants and anti-oxidant capacity, genetic expression of inflammatory molecules, as well as cytogenetic changes including sister chromatid exchange, micronuclei, and chromosome aberrations of peripheral lymphocytes. Both mutation type and hot spots of p53 gene were significantly different in arsenic-induced and non-arsenic-induced TCCs. The frequency of chromosomal imbalances analyzed by comparative genomic hybridization and the frequency of loss of heterozygosity were significantly higher in arsenic-induced TCC than non-arsenic-induced TCC at specific sites. Biomarkers of susceptibility to arsenic-induced health hazards included genetic polymorphisms of enzymes involved in xenobiotic metabolism, DNA repair, and oxidative stress, as well as serum level of carotenoids. Gene-gene and gene-environment interactions are involved in arsenic-induced health hazards through toxicological mechanisms including genomic instability and oxidative stress.

Ingested arsenic, cigarette smoking, and lung cancer risk: a follow-up study in arseniasis-endemic areas in Taiwan.

CONTEXT: Arsenic has been documented as a lung carcinogen in humans in only a few follow-up studies, which were limited by a small number of cases or the lack of information on cigarette smoking. OBJECTIVES: To elucidate the dose-response relationship between ingested arsenic and lung cancer and to assess the effect of cigarette smoking on the arsenic-lung cancer association. DESIGN, SETTING, AND PARTICIPANTS: A total of 2503 residents in southwestern and 8088 in northeastern arseniasis-endemic areas in Taiwan were followed up for an average period of 8 years. Information on arsenic exposure, cigarette smoking, and other risk factors was collected at enrollment through standardized questionnaire interview. MAIN OUTCOME MEASURES: The incidence of lung cancer was ascertained through linkage with national cancer registry profiles in Taiwan (January 1985-December 2000). The joint effect of arsenic and cigarette smoking was estimated by both etiologic fraction and synergy index. RESULTS: There were 139 newly diagnosed lung cancer cases during a follow-up period of 83,783 person-years. After adjustment for cigarette smoking and other risk factors, there was a monotonic trend of lung cancer risk by arsenic level in drinking water of less than 10 to 700 microg/L or more (P<.001). The relative risk was 3.29 (95% confidence interval, 1.60-6.78) for the highest arsenic level compared with the lowest. The etiologic fraction of lung cancer attributable to the joint exposure of ingested arsenic and cigarette smoking ranged from 32% to 55%. The synergy indices ranged from 1.62 to 2.52, indicating a synergistic effect of ingested arsenic and cigarette smoking on lung cancer. CONCLUSIONS: There was a significant dose-response trend of ingested arsenic on lung cancer risk, which was more prominent among cigarette smokers. The risk assessment of lung cancer induced by ingested arsenic should take cigarette smoking into consideration.

Biological gradient between long-term arsenic exposure and carotid atherosclerosis.

BACKGROUND: Long-term exposure to ingested arsenic has been documented to induce peripheral vascular disease, ischemic heart disease, and cerebral infarction in a dose-response relationship. This study further examined the biological gradient between ingested inorganic arsenic and carotid atherosclerosis. METHODS AND RESULTS: We studied 199 male and 264 female adult residents from the southwestern area of endemic arseniasis in Taiwan. The extent of carotid atherosclerosis was assessed by duplex ultrasonography. Diabetes mellitus was determined by oral glucose tolerance test, hypertension by mercury sphygmomanometers, and serum lipid profiles by autoanalyzers. Information regarding the consumption of high-arsenic artesian well water, cigarette smoking, and alcohol consumption was obtained through standardized questionnaire interviews. Logistic regression analysis was used to estimate the odds ratio and its 95% CI of carotid atherosclerosis for various risk factors. Three indices of long-term exposure to ingested arsenic, including the duration of consuming artesian well water, the average arsenic concentration in consumed artesian well water, and cumulative arsenic exposure, were all significantly associated with prevalence of carotid atherosclerosis in a dose-response relationship. The biological gradient remained significant after adjustment for age, sex, hypertension, diabetes mellitus, cigarette smoking, alcohol consumption, waist-to-hip ratio, and serum levels of total cholesterol and LDL cholesterol. The multivariate-adjusted odds ratio was 3.1 (95% CI 1.3 to 7.4) for those who had a cumulative arsenic exposure of > or =20 mg/L-years compared with those without exposure to arsenic from drinking artesian well water. CONCLUSIONS: Carotid atherosclerosis is associated with ingested inorganic arsenic, showing a significant biological gradient.