RESUMEN
OBJECTIVES: Evaluate a new light-cured material with better properties for vital pulp therapy. METHODS: Light-cured resin materials consisted of polyethylene glycol (600) diacrylate mixed with different ratios of TCP to HA. In addition to the temperature change (n = 5 for each subgroup) were tested, cell viability and Alizarin Red Staining (ARS) assay were also tested in vitro on human dental pulp cells (n = 6 for each subgroup). Lastly, the material was then compared with Biodentine and control groups in the molars of Wistar rats in vivo for histology assessment. RESULTS: The temperature change for the new materials were under 5 degrees Celsius. For the in vitro assessments, there was no significant difference on day 3 and day 7 for cell viability test. ARS assay showed significantly higher mineralized nodule formation when treated without induction medium for Group D and Biodentine on day 10 compared to Group C and control. On the contrary, Biodentine and control groups treated with induction medium showed significant higher mineralization than the new materials. Histology assessments demonstrated higher mineralized content in Group D and Biodentine on week 3 and week 6. The inflammatory cells in the dental pulp complex of the Biodentine group resolved on week 6 while the inflammation resolved in Group D on week 3. SIGNIFICANCE: The new material exhibits low heat production, low cytotoxicity, and good calcium ion release capability. Compared to traditional materials, it has shorter setting time and better aesthetic outcomes, making it highly suitable for use in vital pulp therapy.
Asunto(s)
Materiales Biocompatibles , Compuestos de Calcio , Fosfatos de Calcio , Supervivencia Celular , Pulpa Dental , Durapatita , Ensayo de Materiales , Ratas Wistar , Ratas , Animales , Pulpa Dental/citología , Pulpa Dental/efectos de los fármacos , Durapatita/química , Durapatita/farmacología , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Humanos , Supervivencia Celular/efectos de los fármacos , Compuestos de Calcio/química , Compuestos de Calcio/farmacología , Fosfatos de Calcio/química , Fosfatos de Calcio/farmacología , Silicatos/química , Materiales de Recubrimiento Pulpar y Pulpectomía/farmacología , Materiales de Recubrimiento Pulpar y Pulpectomía/química , Células Cultivadas , Polietilenglicoles/química , Temperatura , MasculinoRESUMEN
Background/purpose: Peripheral neural regeneration is an interesting and challenging field. The aim of this study was to investigate the interactions of neural-like PC12 cells and Poly-D-Lysine (PDL)-coated 3D-printed polycaprolactone (PCL) scaffolds with different inner diameters of half tubular array (HTA) (0, 200, 300, and 400 µm), respectively. Materials and methods: This study used the fused deposition modeling (FDM) technique with 3D-printing to fabricate the thermoplastic polymer. Scaffold properties were measured by mechanical testing, and coating quality was observed under a scanning electron microscope (SEM). PC12 cell biocompatibility was examined by an MTT assay. Cell differentiation was evaluated by immunofluorescence staining. Results: The cell viability of PC12 cells on PDL-coated PCL scaffolds with a 200-µm inner diameter of HTA was shown with significant differences (∗P < 0.05, ∗∗P < 0.01, ∗∗∗P < 0.001) than other PCL groups at all experimental dates. The SEM observation showed that PDL-coated PCL scaffolds with 200-µm inner diameters of HTA promoted cell adhesion. An immunofluorescence staining of PC12 cells on the PDL-coated PCL scaffold with a 200-µm inner diameter of the HTA group showed that it stimulated PC12 cells for neurite formation much better than the other groups.A PDL-coated PCL scaffold with a 200-µm inner diameter of HTA can promote the growth and differentiation of PC12 cells better than other groups. It indicated that PDL-coated PCL scaffolds with a 200-µm inner diameter HTA can be used for further neural regeneration application.
RESUMEN
BACKGROUND/PURPOSE: 3D-printing technology is an important tool for the bone tissue engineering (BTE). The aim of this study was to investigate the interaction of polycaprolactone (PCL) scaffolds and modified mesh PCL coated with beta TCP (PCL/ß-TCP) scaffolds with MG-63. METHODS: This study used the fused deposition modeling (FDM) technique with the 3D printing technique to fabricate the thermoplastic polymer and composite scaffolds. Scaffold structure and coating quality were observed under a scanning electron microscope (SEM). MG-63 cells were injected and attached to the mesh-manufactured PCL scaffolds. The biocompatibility of mesh structured PCL and PCL/ß-TCP scaffolds could be examined by measuring the viability of MG-63 cells of MTT assay. Bone cell differentiation was evaluated ALP activity by mineralization assay. RESULTS: The results showed that both mesh PCL scaffolds and PCL/ß-TCP scaffolds were non-toxic to the cells. The ALP activities of cells in PCL/ß-TCP scaffolds groups were significant differences and better than PCL groups in all groups at all experimental dates. The mineralization process was time-dependent, and significantly higher mineralization of osteosarcoma cells was observed on PCL/ß-TCP scaffolds at experimental dates. CONCLUSION: We concluded that both meshes structured PCL and PCL/ß-TCP scaffolds could promote the MG-63 cell growth, and PCL/ß-TCP was better than the PCL scaffolds for the outcome of MG63 cell differentiation and mineralization.
Asunto(s)
Regeneración Ósea , Poliésteres , Andamios del Tejido , Humanos , Andamios del Tejido/química , Fosfatos de Calcio/química , Impresión TridimensionalRESUMEN
BACKGROUND/PURPOSE: To investigate the surface characteristics of titanium (Ti) implant materials, which were coated with different thicknesses of nanoscale tin oxide (SnO2) using the atomic layer deposition technique, and evaluated its biological performance on human embryonic palatal mesenchyme (HEPM) cells. METHODS: The thickness of the coating layer on Ti was 0 (Ti0), 20 nm (Ti20), 50 nm (Ti50), and 100 nm (Ti100), respectively. The surface morphology was observed with an SEM and AFM. The root mean square roughness of micron-scale (mRq) and nanoroughness (nRq) of Ti discs' surface were measured. The Alamar blue (AB) assay and F-actin fluorescence staining were used to evaluate the biocompatibility, and the osteocalcin (OCN) was measured to clarify the differentiation of HEPM cells on materials. RESULTS: In the coating groups, the mRq was decreased, but the nRq was increased. The spreading and polygonal morphology of HEPMs was apparent in coating groups. On Day 4, the survival rate of HEPM cells on Ti0 was higher than on Ti20 and Ti50. There was no significant difference on Day 7, Day 10, and Day 14. The OCN was significantly higher on Day 14 in all the coating groups than Ti0. CONCLUSION: The results showed that the cell growth was intensified with rough surfaces. However, the OCN and morphology change was prominent when the nanoroughness was increased, which meant the increased nanoroughness might enhance OCN production and improve the tendency of osseointegration. The nanoscale SnO2 coating could increase the ability of bone formation but not cell growth.
Asunto(s)
Materiales Biocompatibles Revestidos , Titanio , Humanos , Oseointegración , Diferenciación Celular , Osteogénesis , Propiedades de SuperficieRESUMEN
Tooth regeneration is an important issue. The purpose of this study was to explore the feasibility of using adult dental pulp stem cells on polylactic acid scaffolds for tooth regeneration. Three teeth were extracted from each side of the lower jaws of two adult dogs. In the experimental group, dental pulp stem cells were isolated and seeded in the 3D-printed hydroxyapatite/polylactic acid (HA/PLA) scaffolds for transplantation into left lower jaw of each dog. The right-side jaw of each dog was transplanted with cell-free scaffolds as the control group. Polychrome sequentially labeling was performed for observation of mineralization. Dental cone beam computed tomography (CBCT) irradiation was used for assessment. Nine months after surgery, dogs were euthanized, and the lower jaws of dogs were sectioned and fixed for histological observation with hematoxylin and eosin staining. The results showed that the degree of mineralization in the experimental group with cells seeded in the scaffolds was significantly higher than that of the control group transplanted with cell-free scaffolds. However, the HA/PLA scaffolds were not completely absorbed in both groups. It is concluded that dental pulp stem cells are important for the mineralization of tooth regeneration. A more rapid absorbable material was required for scaffold design for tooth regeneration.
Asunto(s)
Pulpa Dental/crecimiento & desarrollo , Durapatita/química , Regeneración/efectos de los fármacos , Diente/crecimiento & desarrollo , Animales , Perros , Durapatita/farmacología , Poliésteres/química , Impresión Tridimensional , Regeneración/genética , Células Madre/citología , Andamios del TejidoRESUMEN
BACKGROUND: As Taiwan's Mental Health Act (MHA) clearly states that the human rights and legal rights of psychotic patients should be respected and guaranteed; however, a temple asylum violates the law in the 21st century. Hundreds of patients were constrained in the asylum for years without consent. Because of outbreak of infectious diseases, patients were evacuated from the asylum by the official intervention. AIMS: To evaluate the outcomes of these patients from folk therapy to conventional treatment. METHOD: The study recruited the drug-naive psychotic patients constrained in an asylum for decades. Before and after the formal treatment, 253 patients were diagnosed with schizophrenia and other psychotic disorders with assessment of using the Mini Positive and Negative Syndrome Scale (Mini-PANSS) and Comprehensive Occupational Therapy Evaluation (COTE) scale. In addition, family function, self-care ability and nutritional status were also evaluated. RESULTS: The initial data show the improvement in psychotic symptoms and occupational function in these patients. Furthermore, the ratio of patients who were classified as being at risk for malnutrition was decreased by 21.7% after treatment. There was no statistically significant difference in self-care ability before and after treatment. CONCLUSION: The psychotic symptoms and occupational function of these patients were improved after the formal treatment compared to the folk therapy. The care model for the psychotic patients in the temple asylum should be more thoroughly discussed in consideration of the medical ethics principles.
Asunto(s)
Medicina Basada en la Evidencia , Psiquiatría , Trastornos Psicóticos , Esquizofrenia , Hospitales Psiquiátricos , Humanos , Salud MentalRESUMEN
BACKGROUND/PURPOSE: In recent years, 3D printing technology has flourished and applied to tissue engineering regeneration. The purpose of this study is to investigate the effects of gap width between struts (GWbS) of three-dimensional-printed polylactic acid scaffolds (3DP-PLASs) on neural differentiation of human dental pulp stem cells (hDPSCs). METHODS: Both the 3DP-PLASs with the GWbS of 150 µm and 200 µm were experimental groups and the 3DP-PLAS without microfilament struts was the control group. Properties of 3DP-PLASs were observed by water contact angles (WCA), atomic force microscope (AFM), and differential scanning calorimeter (DSC). The cell culture of hDPSCs on 3DP-PLASs was performed, and cytotoxicities were measured with Alamar Blue assay. The neural differentiation of hDPSCs on different 3DP-PLASs was compared after neural induction. Expressions of neural markers Nestin, MAP2, beta III tubulin, and GFAP were evaluated with immunocytochemical staining. RESULTS: Our results demonstrated no cytotoxicities among scaffolds, whereas they may differ in crystal sizes and directions resulting from different orders of cooling time, contact surface, and temperature distribution during the building process. In addition, hDPSCs could successfully adhere to 3DP-PLAS modified by alcohol or poly-l-Lysine and demonstrate morphological change and related protein performance. CONCLUSION: We conclude that 3DP-PLASs with 150 µm gaps can induce cellular orientations more easily than those with 200 µm gaps. In addition, 3DP-PLASs seem to improve cell adhesion after being coated with poly-l-lysine or soaked with alcohol.
Asunto(s)
Pulpa Dental/citología , Poliésteres/química , Impresión Tridimensional , Células Madre/citología , Andamios del Tejido/química , Técnicas de Cultivo de Célula , Diferenciación Celular , Proliferación Celular , Humanos , Neuronas/citología , Ingeniería de TejidosRESUMEN
BACKGROUND/PURPOSE: It has been confirmed that polyphenolic compounds present in food have various pharmaceutical functions. The purpose of this study was to evaluate citrus polyphenol (CP) for dental applications. The culture medium with CP was developed to inhibit the proliferation of oral cancer cells. CP could be used as a supplemental compound for topical application for oral cancer patients. METHODS: In this study, the metabolic activity and cell toxicity of CP (at concentrations of 1%, 0.1%, and 0.01%) for oral and cervical cancer cells were investigated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide and lactate dehydrogenase assays (n = 6). Furthermore, the effects of CP on motilities of oral and cervical cancer cells were also evaluated using a scratch assay model. RESULTS: We found that the growth of Ca9-22 and HeLa cells on tissue culture polystyrene was greatly inhibited when 1% CP was added to the medium. In addition, significant differences (p < 0.01) in cytotoxicities of oral and cervical cancer cells were observed after 6 days in the culture medium to which 1% CP was added. Furthermore, using a scratch assay model to evaluate the migratory abilities of oral and cervical cancer cells, it was also found that CP could inhibit the migratory abilities of cancer cells. CONCLUSION: The results confirmed the feasibility of the topical application of CP as a supplemental compound for inhibition of cancer cell proliferation and migration.
Asunto(s)
Movimiento Celular/efectos de los fármacos , Proliferación Celular/efectos de los fármacos , Citrus/química , Polifenoles/farmacología , Células HeLa , HumanosRESUMEN
BACKGROUND/PURPOSE: Novel liquid crystalline epoxy nanocomposites, which exhibit reduced polymerization shrinkage and effectively bond to tooth structures, can be applied in esthetic dentistry, including core and post systems, direct and indirect restorations, and dental brackets. The purposes of this study were to investigate the properties of liquid crystalline epoxy nanocomposites including biocompatibility, microhardness, and frictional forces of bracket-like blocks with different filler contents for further clinical applications. METHODS: In this study, we evaluated liquid crystalline epoxy nanocomposite materials that exhibited various filler contents, by assessing their cell activity performance using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and their microhardness with or without thermocycling. We also evaluated the frictional force between bracket-like duplicates and commercially available esthetic bracket systems using Instron 5566. RESULTS: The liquid crystalline epoxy nanocomposite materials showed good biocompatibility. The materials having high filler content demonstrated greater microhardness compared with commercially available bracket materials, before and after the thermocycling treatment. Thus, manufacturing processes are important to reduce frictional force experienced by orthodontic brackets. CONCLUSION: The microhardness of the bracket-like blocks made by our new material is superior to the commercially available brackets, even after thermocycling. Our results indicate that the evaluated liquid crystalline epoxy nanocomposite materials are of an appropriate quality for application in dental core and post systems and in various restorations. By applying technology to refine manufacturing processes, these new materials could also be used to fabricate esthetic brackets for orthodontic treatment.
Asunto(s)
Resinas Epoxi/química , Nanocompuestos/química , Soportes Ortodóncicos , Estrés Mecánico , Análisis del Estrés Dental , Fricción , Ensayo de MaterialesRESUMEN
We report the development of low moisture permeation and transparent dense polyacrylate/silica nanocomposite material that can exhibit both superhydrophobic and oleophobic (omniphobic) properties. The material was prepared by a three-step process. The first step involved the preparation of UV polymerizable solventless hybrid resin and the fabrication of nanocomposite. The hybrid resin consisted of a mixture of acrylate monomer, initiator, and acrylate-modified different size silica nanoparticles. The second step was to roughen the surface of the nanocomposite with unique nanotexture by oxygen plasma. In the third step, we applied a low surface tension fluoro monolayer on the treated surface. The nanocomposite exhibits desired superhydrophobicity and oleophobicity with a water contact angle of 158.2° and n-1-octadecene contact angle of 128.5°, respectively; low moisture permeation of 1.44 g·mm/m(2)·day; and good transparency (greater than 82% at 450-800 nm for ~60 µm film). The material has potential applications in optoelectronic encapsulation, self-cleaning coating, etc.
RESUMEN
Colloid TiO(2) nanorods are used for solution-processable poly(3-hexyl thiophene): TiO(2) hybrid solar cell. The nanorods were covered by insulating ligand of oleic acid (OA) after sol-gel synthesis. Three more conducting pyridine type ligands: pyridine, 2,6-lutidine (Lut) and 4-tert-butylpyridine (tBP) were investigated respectively to replace OA. The power conversion efficiency (PCE) of the solar cell was increased because the electronic mobility of pyridine-type ligand-modified TiO(2) is higher than that of TiO(2)-OA. The enhancement of PCE is in the descending order of Lut > pyridine > tBP because of the effective replacement of OA by Lut. The PCE of solar cell can be further enhanced by ligand exchange of pyridine type ligand with conjugating molecule of 2-cyano-3-(5-(7-(thiophen-2-yl)-benzothiadiazol-4-yl) thiophen-2-yl) acrylic acid (W4) on TiO(2) nanorods because W4 has aligned bandgap with P3HT and TiO(2) to facilitate charge separation and transport. The electronic mobility of two-stage ligand exchanged TiO(2) is improved furthermore except Lut, because it adheres well and difficult to be replaced by W4. The amount of W4 on TiO(2)-tBP is 3 times more than that of TiO(2)-Lut (0.20 mol % vs. 0.06 mol %). Thus, the increased extent of PCE of solar cell is in the decreasing order of tBP > pyridine > Lut. The TiO(2)-tBP-W4 device has the best performance with 1.4 and 2.6 times more than TiO(2)-pyridine-W4 and TiO(2)-Lut-W4 devices, respectively. The pKa of the pyridine derivatives plays the major role to determine the ease of ligand exchange on TiO(2) which is the key factor mandating the PCE of P3HT:TiO(2) hybrid solar cell. The results of this study provide new insights of the significance of acid-base reaction on the TiO(2) surface for TiO(2)-based solar cells. The obtained knowledge can be extended to other hybrid solar cell systems.
RESUMEN
OBJECTIVE: This research was designed to investigate the effects of low pressure radio-frequency (RF) oxygen plasma treatment (OPT) on the surface of commercially pure titanium (CP-Ti) and Ti6Al4V. Surface topography, elemental composition, water contact angle, cell viability, and cell morphology were surveyed to evaluate the biocompatibility of titanium samples with different lengths of OP treating time. MATERIALS AND METHODS: CP-Ti and Ti6Al4V discs were both classified into 4 groups: untreated, treated with OP generated by using oxygen (99.98%) for 5, 10, and 30 min, respectively. After OPT on CP-Ti and Ti6Al4V samples, scanning probe microscopy, X-ray photoelectron spectrometry (XPS), and contact angle tests were conducted to determine the surface topography, elemental composition and hydrophilicity, respectively. The change of surface morphology was further studied using sputtered titanium on silicon wafers. 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay and F-actin immunofluorescence stain were performed to investigate the viability and spreading behavior of cultivated MG-63 cells on the samples. RESULTS: The surface roughness was most prominent after 5 min OPT in both CP-Ti and Ti6Al4V, and the surface morphology of sputtered Ti sharpened after the 5 min treatment. From the XPS results, the intensity of Ti(°), Ti(2+), and Ti(3+) of the samples' surface decreased indicating the oxidation of titanium after OPT. The water contact angles of both CP-Ti and Ti6Al4V were increased after 5 min OPT. The results of MTT assay demonstrated MG-63 cells proliferated best on the 5 min OP treated titanium sample. The F-actin immunofluorescence stain revealed the cultivated cell number of 5 min treated CP-Ti/Ti6Al4V was greater than other groups and most of the cultivated cells were spindle-shaped. CONCLUSIONS: Low pressure RF oxygen plasma modified both the composition and the morphology of titanium samples' surface. The CP-Ti/Ti6Al4V treated with 5 min OPT displayed the roughest surface, sharpest surface profile and best biocompatibility.
Asunto(s)
Proliferación Celular , Ensayo de Materiales , Oxígeno/química , Ondas de Radio , Titanio/química , Línea Celular Tumoral , Humanos , Oxidación-Reducción , Propiedades de SuperficieRESUMEN
Low-shrinkage resin-based photocurable liquid crystalline epoxy nanocomposite has been investigated with regard to its application as a dental restoration material. The nanocomposite consists of an organic matrix and an inorganic reinforcing filler. The organic matrix is made of liquid crystalline biphenyl epoxy resin (BP), an epoxy resin consisting of cyclohexylmethyl-3,4-epoxycyclohexanecarboxylate (ECH), the photoinitiator 4-octylphenyl phenyliodonium hexafluoroantimonate and the photosensitizer champhorquinone. The inorganic filler is silica nanoparticles (â¼70-100 nm). The nanoparticles were modified by an epoxy silane of γ-glycidoxypropyltrimethoxysilane to be compatible with the organic matrix and to chemically bond with the organic matrix after photo curing. By incorporating the BP liquid crystalline (LC) epoxy resin into conventional ECH epoxy resin, the nanocomposite has improved hardness, flexural modulus, water absorption and coefficient of thermal expansion. Although the incorporation of silica filler may dilute the reinforcing effect of crystalline BP, a high silica filler content (â¼42 vol.%) was found to increase the physical and chemical properties of the nanocomposite due to the formation of unique microstructures. The microstructure of nanoparticle embedded layers was observed in the nanocomposite using scanning and transmission electron microscopy. This unique microstructure indicates that the crystalline BP and nanoparticles support each other and result in outstanding mechanical properties. The crystalline BP in the LC epoxy resin-based nanocomposite was partially melted during exothermic photopolymerization, and the resin expanded via an order-to-disorder transition. Thus, the post-gelation shrinkage of the LC epoxy resin-based nanocomposite is greatly reduced, â¼50.6% less than in commercialized methacrylate resin-based composites. This LC epoxy nanocomposite demonstrates good physical and chemical properties and good biocompatibility, comparable to commercialized composites. The results indicate that this novel LC nanocomposite is worthy of development and has potential for further applications in clinical dentistry.
Asunto(s)
Compuestos de Bifenilo/química , Materiales Dentales/química , Resinas Epoxi/química , Cristales Líquidos/química , Nanocompuestos/química , Muerte Celular , Línea Celular Tumoral , Supervivencia Celular , Geles , Dureza , Humanos , Luz , Nanocompuestos/ultraestructura , TemperaturaRESUMEN
As a potential solution for patients to retrieve their lost salivary gland functions, tissue engineering of an auto-secretory device is profoundly needed. Under serum-free environment, primary human parotid gland acinar (PGAC) cells can be obtained. After reaching confluence, PGAC cells spontaneously form three-dimension (3D) cell aggregations, termed post-confluence structure (PCS), and change their behaviors. Poly (lactic-co-glycolic acid) (PLGA) has been widely used in the field of biomedical applications because of its biodegradable properties for desired functions. Nonetheless, the role of PLGA in facilitating PGAC cells to form PCS has seldom been explored to recover epithelial characteristics. In this study, PGAC cells were found to have a greater tendency to form PCS on PLGA than on tissue culture polystyrene (TCPS). By tracing cell migration paths and modulating E-cadherin activity with specific inhibitor or antibody, we demonstrated that the static force of homophilic interaction on surfaces of individual cells, but not the dynamics of cell migration, played a more important role in PCS formation. Thus, PLGA was successfully confirmed to support PGAC cells to form more PCS through the effects on enhancing E-cadherin expression, which is associated with FAK/ILK/Snail expression in PGAC cells. This result indicates that selective appropriate biomaterials may be potentially useful in generating 3D PCS on two-dimension (2D) substrate without fabricating a complex 3D scaffold.