Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
Más filtros













Base de datos
Intervalo de año de publicación
1.
JBMR Plus ; 8(3): ziae007, 2024 Feb.
Artículo en Inglés | MEDLINE | ID: mdl-38505220

RESUMEN

High-resolution peripheral quantitative computed tomography (HR-pQCT) has been used for in vivo 3D visualization of trabecular microstructure. Second-generation HR-pQCT (HR-pQCT II) has been shown to have good agreement with first generation HR-pQCT (HR-pQCT I). Advanced Individual Trabecula Segmentation (ITS) decomposes the trabecula network into individual plates and rods. ITS based on HR-pQCT I showed a strong correlation to ITS based on micro-computed tomography (µCT) and identified trabecular changes in metabolic bone diseases. ITS based on HR-pQCT II has new potential because of the enhanced resolution but has yet to be validated. The objective of this study was to assess the agreement between ITS based on HR-pQCT I, HR-pQCT II, and µCT to assess the capability of ITS on HR-pQCT images as a tool for studying bone structure. Freshly frozen tibia and radius bones were scanned in the distal region using HR-pQCT I at 82 µm, HR-pQCT II at 60.7 µm, and µCT at 37 µm. Images were registered, binarized, and ITS analysis was performed. Bone volume fraction (pBV/TV, rBV/TV), number density (pTb.N, rTb.N), thickness (pTb.Th, rTb.Th), and plate-to-rod (PR) ratio (pBV/rBV) of trabecular plates and rods were obtained. Paired Student's t-tests with post hoc Bonferroni analysis were used to examine the differences. Linear regression was used to determine the correlation coefficient. The HR-pQCT I parameters were different from the µCT measurements. The HR-pQCT II parameters were different from the µCT measurements except for rTb.N, and the HR-pQCT I parameters were different from the HR-pQCT II measurements except for pTb.Th. The strong correlation between HR-pQCT II and µCT microstructural analysis (R2 = 0.55-0.94) suggests that HR-pQCT II can be used to assess changes in plate and rod microstructure and that values from HR-pQCT I can be corrected.

2.
Bone ; 167: 116638, 2023 02.
Artículo en Inglés | MEDLINE | ID: mdl-36464243

RESUMEN

Anterior cruciate ligament (ACL) tear leads to post-traumatic osteoarthritis (PTOA), a significant clinical burden worldwide that currently has no cure. Recent studies suggest a role of subchondral bone adaptations in the development of PTOA. Particularly, microstructural changes in the rod-and-plate microstructure of subchondral bone may precede and contribute to OA progression. In this study, we quantified microstructural changes in subchondral trabecular rods and plates after ACL-transection for the first time in the well-established preclinical canine model of PTOA and investigated the therapeutic potentials of a bisphosphonate (zoledronate) and NSAID treatment (meloxicam). Unilateral hindlimb ACL transection was performed on skeletally-mature (2-year-old, N = 20) and juvenile (10-month-old, N = 20) male beagles. Animals were assigned to 4 groups (N = 5): ACLT, un-operated control, ACLT with zoledronate, and ACLT with meloxicam treatment. Subchondral bone microstructure was evaluated by micro-computed tomography and cartilage integrity was evaluated histologically. We found that ACL-induced subchondral bone changes depended on skeletal maturity of animals. In mature animals, significant loss of trabecular plates that resulted in reduced PR ratio occurred at Month 1 and persisted until Month 8. Zoledronate treatment prevented trabecular plate loss while meloxicam treatment did not. Whether cartilage degeneration is also attenuated warrants further investigation. In juvenile animals that have not reached skeletal maturity, transient changes in trabecular plate and rod microstructure occurred at Month 3 but not Month 9. Neither zoledronate nor meloxicam treatment attenuated bone microstructural changes or cartilage damages. Findings from this study suggest that early inhibition of bone resorption by bisphosphonate after injury may be a promising therapeutic approach to prevent alterations in subchondral bone microstructure associated with PTOA. Our results further demonstrate that pathogenesis of PTOA may differ between adolescent and adult patients and therefore require distinct management strategies.


Asunto(s)
Lesiones del Ligamento Cruzado Anterior , Cartílago Articular , Osteoartritis , Animales , Masculino , Perros , Ácido Zoledrónico/farmacología , Ácido Zoledrónico/uso terapéutico , Microtomografía por Rayos X , Meloxicam/farmacología , Meloxicam/uso terapéutico , Huesos/patología , Osteoartritis/patología , Lesiones del Ligamento Cruzado Anterior/tratamiento farmacológico , Lesiones del Ligamento Cruzado Anterior/complicaciones , Cartílago Articular/patología , Modelos Animales de Enfermedad
3.
Bone ; 154: 116187, 2022 01.
Artículo en Inglés | MEDLINE | ID: mdl-34530172

RESUMEN

BACKGROUND: Age-related trabecular microstructural deterioration and conversion from plate-like trabeculae to rod-like trabeculae occur because of unbalanced rapid remodeling. As denosumab achieves greater remodeling suppression and lower cortical porosity than alendronate, we hypothesized that denosumab might also preserve trabecular plate microstructure, bone stiffness and strength more effectively than alendronate. METHODS: In this post hoc analysis of a phase 2 study, postmenopausal women randomized to placebo (P, n = 74), denosumab (D, n = 72), or alendronate (A, n = 68). HR-pQCT scans of the distal radius and tibia were performed at baseline and Month-12 (M12). Trabecular compartment was subjected to Individual Trabecula Segmentation while finite element analysis was performed to estimate stiffness and strength. Percent change from baseline at M12 of each parameter was compared between patient groups. RESULTS: At the distal tibia, in the placebo group, plate surface area (pTb.S, -1.3%) decreased while rod bone volume fraction (rBV/TV, +4.5%) and number (rTb.N, +2.1%) increased. These changes were prevented by denosumab but persisted despite alendronate therapy (pTb.S: -1.7%; rBV/TV: +6.9%; rTb.N: +3.0%). Both treatments improved whole bone stiffness (D: +3.1%; A: +1.8%) and failure load (D: +3.0%; A: +2.2%); improvements using denosumab was significant compared to placebo (stiffness: p = 0.004; failure load: p = 0.003). At the distal radius, denosumab increased total trabecular bone volume fraction (BV/TV, +3.4%) and whole bone failure load (+4.0%), significantly different from placebo (BV/TV: p = 0.044; failure load: p = 0.046). Significantly different effects of either drug on plate and rod microstructure were not detected. CONCLUSIONS: Denosumab preserved trabecular plate microstructure. Alendronate did not. However, estimated strength did not differ between denosumab and alendronate treated groups.


Asunto(s)
Alendronato , Denosumab , Alendronato/farmacología , Alendronato/uso terapéutico , Densidad Ósea , Denosumab/farmacología , Denosumab/uso terapéutico , Femenino , Humanos , Radio (Anatomía)/diagnóstico por imagen , Tibia/diagnóstico por imagen
4.
Sci Adv ; 7(48): eabi5584, 2021 Nov 26.
Artículo en Inglés | MEDLINE | ID: mdl-34826240

RESUMEN

Architectured materials offer tailored mechanical properties but are limited in engineering applications due to challenges in maintaining toughness across their attachments. The enthesis connects tendon and bone, two vastly different architectured materials, and exhibits toughness across a wide range of loadings. Understanding the mechanisms by which this is achieved could inform the development of engineered attachments. Integrating experiments, simulations, and previously unexplored imaging that enabled simultaneous observation of mineralized and unmineralized tissues, we identified putative mechanisms of enthesis toughening in a mouse model and then manipulated these mechanisms via in vivo control of mineralization and architecture. Imaging uncovered a fibrous architecture within the enthesis that controls trade-offs between strength and toughness. In vivo models of pathology revealed architectural adaptations that optimize these trade-offs through cross-scale mechanisms including nanoscale protein denaturation, milliscale load-sharing, and macroscale energy absorption. Results suggest strategies for optimizing architecture for tough bimaterial attachments in medicine and engineering.

5.
J Bone Miner Res ; 36(9): 1796-1807, 2021 09.
Artículo en Inglés | MEDLINE | ID: mdl-33989436

RESUMEN

Trabecular plates and rods determine apparent elastic modulus and yield strength of trabecular bone, serving as important indicators of bone's mechanical integrity in health and disease. Although trabecular bone's apparent-level mechanical properties have been widely reported, tissue mechanical properties of individual trabeculae have not been fully characterized. We systematically measured tissue mineral density (TMD)-dependent elastic modulus of individual trabeculae using microindentation and characterized its anisotropy as a function of trabecular type (plate or rod), trabecular orientation in the global coordinate (longitudinal, oblique, or transverse along the anatomic loading axis), and indentation direction along the local trabecular coordinate (axial or lateral). Human trabecular bone samples were scanned by micro-computed tomography for TMD and microstructural measurements. Individual trabecula segmentation was used to decompose trabecular network into individual trabeculae, where trabecular type and orientation were determined. We performed precise, selective indentation of trabeculae in each category using a custom-built, microscope-coupled microindentation device. Co-localization of TMD at each indentation site was performed to obtain TMD-to-modulus correlations. We found significantly higher TMD and tissue modulus in trabecular plates than rods. Regardless of trabecular type and orientation, axial tissue modulus was consistently higher than lateral tissue modulus, with ratios ranging from 1.13 to 1.41. Correlations between TMD and tissue modulus measured from axial and lateral indentations were strong but distinct: axial correlation predicted higher tissue modulus than lateral correlation at the same TMD level. To assess the contribution of experimentally measured anisotropic tissue properties of individual trabeculae to apparent-level mechanics, we constructed non-linear micro-finite element models using a new set of trabecular bone samples and compared model predictions to mechanical testing measurements. Heterogeneous anisotropic models accurately predicted apparent elastic modulus but were no better than a simple homogeneous isotropic model. Variances in tissue-level properties may therefore contribute nominally to apparent-level mechanics in normal human trabecular bone. © 2021 American Society for Bone and Mineral Research (ASBMR).


Asunto(s)
Huesos , Hueso Esponjoso , Anisotropía , Fenómenos Biomecánicos , Huesos/diagnóstico por imagen , Hueso Esponjoso/diagnóstico por imagen , Módulo de Elasticidad , Humanos , Microtomografía por Rayos X
6.
J Biomech Eng ; 141(9)2019 Sep 01.
Artículo en Inglés | MEDLINE | ID: mdl-31260520

RESUMEN

High-resolution peripheral quantitative computed tomography (HR-pQCT) is a promising imaging modality that provides an in vivo three-dimensional (3D) assessment of bone microstructure by scanning fixed regions of the distal radius and tibia. However, how microstructural parameters and mechanical analysis based on these segment scans correlate to whole distal radius and tibia mechanics are not well-characterized. On 26 sets of cadaveric radius and tibia, HR-pQCT scans were performed on the standard scan segment, a segment distal to the standard segment, and a segment proximal to the standard segment. Whole distal radius and tibia stiffness were determined through mechanical testing. Segment bone stiffness was estimated using linear finite element (FE) analysis based on segment scans. Standard morphological and individual trabecula segmentation (ITS) analyses were used to estimate microstructural properties. Significant variations in microstructural parameters were observed among segments at both sites. Correlation to whole distal radius and tibia stiffness was moderate for microstructural parameters at the standard segment, but correlation was significantly increased for FE-predicted segment bone stiffness based on standard segment scans. Similar correlation strengths were found between FE-predicted segment bone stiffness and whole distal radius and tibia stiffness. Additionally, microstructural parameters at the distal segment had higher correlation to whole distal radius and tibia stiffness than at standard or proximal segments. Our results suggest that FE-predicted segment stiffness is a better predictor of whole distal radius and tibia stiffness for clinical HR-pQCT analysis and that microstructural parameters at the distal segment are more highly correlated with whole distal radius and tibia stiffness than at the standard or proximal segments.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA