Designing 3d Transition Metal Cation-Doped MRuOx As Durable Acidic Oxygen Evolution Electrocatalysts for PEM Water Electrolyzers.

The continuous dissolution and oxidation of active sites in Ru-based electrocatalysts have greatly hindered their practical application in proton exchange membrane water electrolyzers (PEMWE). In this work, we first used density functional theory (DFT) to calculate the dissolution energy of Ru in the 3d transition metal-doped MRuOx (M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, and Zn) to evaluate their stability for acidic oxygen evolution reaction (OER) and screen out ZnRuOx as the best candidate. To confirm the theoretical predictions, we experimentally synthesized these MRuOx materials and found that ZnRuOx indeed displays robust acidic OER stability with a negligible decay of η10 after 15 000 CV cycles. Of importance, using ZnRuOx as the anode, the PEMWE can run stably for 120 h at 200 mA cm-2. We also further uncover the stability mechanism of ZnRuOx, i.e., Zn atoms doped in the outside of ZnRuOx nanocrystal would form a "Zn-rich" shell, which effectively shortened average Ru-O bond lengths in ZnRuOx to strengthen the Ru-O interaction and therefore boosted intrinsic stability of ZnRuOx in acidic OER. In short, this work not only provides a new study paradigm of using DFT calculations to guide the experimental synthesis but also offers a proof-of-concept with 3d metal dopants as RuO2 stabilizer as a universal principle to develop high-durability Ru-based catalysts for PEMWE.

Genetic Divergence and Population Structure of Xanthomonas albilineans Strains Infecting Saccharum spp. Hybrid and Saccharum officinarum.

Leaf scald caused by Xanthomonas albilineans (Xa) is a major bacterial disease in sugarcane that represents a threat to the global sugar industry. Little is known about the population structure and genetic evolution of this pathogen. In this study, 39 Xa strains were collected from 6 provinces in China. Of these strains, 15 and 24 were isolated from Saccharum spp. hybrid and S. officinarum plants, respectively. Based on multilocus sequence analysis (MLSA), with five housekeeping genes, these strains were clustered into two distinct phylogenetic groups (I and II). Group I included 26 strains from 2 host plants, Saccharum spp. hybrid and S. officinarum collected from 6 provinces, while Group II consisted of 13 strains from S. officinarum plants in the Zhejiang province. Among the 39 Xa strains, nucleotide sequence identities from 5 housekeeping genes were: ABC (99.6-100%), gyrB (99.3-100%), rpoD (98.4-100%), atpD (97.0-100%), and glnA (97.6-100%). These strains were clustered into six groups (A-F), based on the rep-PCR fingerprinting, using primers for ERIC2, BOX A1R, and (GTG)5. UPGMA and PCoA analyses revealed that group A had the most strains (24), followed by group C with 11 strains, while there was 1 strain each in groups B and D-F. Neutral tests showed that the Xa population in S. officinarum had a trend toward population expansion. Selection pressure analysis showed purification selection on five concatenated housekeeping genes from all tested strains. Significant genetic differentiation and infrequent gene flow were found between two Xa populations hosted in Saccharum spp. hybrids and S. officinarum. Altogether, these results provide evidence of obvious genetic divergence and population structures among Xa strains from China.

Catalytic supercritical water oxidation of o-chloroaniline over Ru/rGO: Reaction variables, conversion pathways and nitrogen distribution.

To ascertain the reaction variables on o-chloroaniline (o-ClA) mineralization, total nitrogen (TN) removal rate, and N-species distribution, o-ClA was subjected to catalytic supercritical water oxidation (CSCWO) in a fused quartz tube reactor (FQTR). The findings demonstrated that when the temperature, reaction time, and excess oxidant were 400 °C, 90 min, and 150%, respectively, the mineralization rate of o-ClA could reach more than 95%. Moreover, potential degradation pathways of o-ClA in supercritical water oxidation (SCWO) was proposed according to the GC-MS results. TN removal rate is significantly impacted by Ru/rGO, despite the fact that its catalytic effect on the mineralization of o-ClA was not particularly noteworthy. Compared with no catalyst, the TN removal rate of o-ClA obviously increased from 44.1% to 90.3% at 400 °C, 10 wt% Ru loading, 90 min and 200% excess oxidant. In addition, N-species distribution in SCWO and CSCWO were also investigated. Results indicated that the Ru/rGO catalyst could accelerate the oxidation of ammonia-N and convert it to nitrate-N, promoting N2 generation. Finally, the possible N transformation pathway in CSCWO of o-ClA was proposed. As a result, this work offers fundamental information about o-ClA catalytic oxidation removal in the SCWO process.

New insights into nitrogen control strategies in sewage sludge pyrolysis toward environmental and economic sustainability.

Sewage sludge (SS) contains a certain amount of nitrogen (N), resulting in various content of N in the pyrolysis products. Investigates on how to control the generation of NH3 and HCN (deleterious gas-N species) or convert it to N2 and maximize transforming N in sewage sludge (SS-N) into potentially valuable N-containing products (such as char-N and/or liquid-N) are of great significance for SS management. Understanding the nitrogen migration and transformation (NMT) mechanisms in SS during the pyrolysis process is essential for investigating the aforementioned issues. Therefore, in this review, the N content and species in SS are summarized, and the influencing factors during the SS pyrolysis process (such as temperature, minerals, atmosphere, and heating rate) that affect NMT in char, gas, and liquid products are analyzed. Furthermore, N control strategies in SS pyrolysis products are proposed toward environmental and economic sustainability. Finally, the state-of-the-art of current research and future prospects are summarized, with a focus on the generation of value-added liquid-N and char-N products, while concurrently reducing NOx emission.

Genetic and morphological variants of Acidovorax avenae subsp. avenae cause red stripe of sugarcane in China.

Sugarcane (Saccharum spp.) is an important cash crop for production of sugar and bioethanol. Red stripe caused by Acidovorax avenae subsp. avenae (Aaa) is a disease that occurs in numerous sugarcane-growing regions worldwide. In this study, 17 strains of Aaa were isolated from 13 symptomatic leaf samples in China. Nine of these strains produced white-cream colonies on nutrient agar medium while the other eight produced yellow colonies. In pairwise sequence comparisons of the 16S-23S rRNA internally transcribed spacer (ITS), the 17 strains had 98.4-100% nucleotide identity among each other and 98.2-99.5% identity with the reference strain of Aaa (ATCC 19860). Three RFLP patterns based on this ITS sequence were also found among the strains of Aaa obtained in this study. Multilocus sequence typing (MLST) based on five housekeeping genes (ugpB, pilT, lepA, trpB, and gltA) revealed that the strains of Aaa from sugarcane in China and a strain of Aaa (30179) isolated from sorghum in Brazil formed a unique evolutionary subclade. Twenty-four additional strains of Aaa from sugarcane in Argentina and from other crops worldwide were distributed in two other and separate subclades, suggesting that strains of A. avenae from sugarcane are clonal populations with local specificities. Two strains of Aaa from China (CNGX08 forming white-cream colored colonies and CNGD05 forming yellow colonies) induced severe symptoms of red stripe in sugarcane varieties LC07-150 and ZZ8 but differed based on disease incidence in two separate inoculation experiments. Infected plants also exhibited increased salicylic acid (SA) content and transcript expression of gene PR-1, indicating that the SA-mediated signal pathway is involved in the response to infection by Aaa. Consequently, red stripe of sugarcane in China is caused by genetically different strains of Aaa and at least two morphological variants. The impact of these independent variations on epidemics of red stripe remains to be investigated.

Self-cleaning MnZn ferrite/biochar adsorbents for effective removal of tetracycline.

A renewable tri-metallic spinel decorated biochar adsorbent (MZF-BC) was fabricated by a facile hydrothermal method and to remove tetracycline. The physicochemical properties of MZF-BC were well studied. MZF-BC with a hybrid pore structure of mesopores (~7.6 nm) and macropores (~50 nm) has the maximum tetracycline adsorption capacity reaching 142.4 mg g-1. Through the study of adsorption kinetics, isotherms and key influencing factors, it was found that MZF-BC adsorption on tetracycline was primarily multi-layer effect with the initial adsorption behavior of pore filling associated with hydrogen bonding and π-π stacking. Furthermore, the MZF-BC performs excellent regeneration ability by driving Fenton-like catalysis as the self-cleaning process in the liquid phase. This study contributes to a new insight into the in-situ regeneration of biochar-based adsorbents after adsorbing organic pollutants in pharmaceutical wastewater treatment.

Cometabolic biodegradation system employed subculturing photosynthetic bacteria: A new degradation pathway of 4-chlorophenol in hypersaline wastewater.

4-chlorophenol (4-CP) as a toxic persistent pollutant is quite difficult treatment by using traditional biological processes. Herein, photosynthetic bacteria (PSB) driven cometabolic biodegradation system associated with exogeneous carbon sources (e.g., sodium acetate) has been demonstrated as an effective microbial technique. The biodegradation rate (ri) can be at 0.041 d-1 with degradation efficiency of 93% in 3094 lx. Through the study of subculturing PSB in absence of NaCl, it was found that 50% inoculation time can be saved but keeping a similar 4-CP biodegradation efficiency in scale-up salinity system. A new plausible biodegradation pathway for 4-CP in 4th G PSB cometabolic system is proposed based on the detected cyclohexanone generation followed by ring opening. It is probably ascribed to the increasement of Firmicutes and Bacteroidetes at phyla level classified based on microbial community. This study contributes to a new insight into cometabolic technology for chlorophenol treatment in industrial hypersaline wastewater.

Humic Substances Derived From Biomass Waste During Aerobic Composting and Hydrothermal Treatment: A Review.

Humic substances (HSs) occupy 80% of organic matter in soil and have been widely applied for soil remediation agents, potential battery materials, and adsorbents. Since the HS extraction rate is very low by microbial degradation in nature, artificial humification processes such as aerobic composting (AC) and hydrothermal treatment (HT) have attracted a great deal of attention as the most important strategies in HS production. This article aims to provide a state-of-the-art review on the development of conversion of biomass waste into HSs based on AC and HT for the first time in terms of mechanisms, characteristics of HSs' molecular structure, and influencing factors. In addition, some differences based on the aforementioned information between AC and HT are reviewed and discussed in the conversion of biomass waste into HSs in a pioneering way. For biomass waste conversion, a feasible strategy on effective humification processes by combining AC with HT is proposed.

Identification and Expression Profiling of WRKY Family Genes in Sugarcane in Response to Bacterial Pathogen Infection and Nitrogen Implantation Dosage.

WRKY transcription factors (TFs) are essential players in different signaling cascades and regulatory networks involved in defense responses to various stressors. This study systematically analyzed and characterized WRKY family genes in the Saccharum spp. hybrid R570 and their expression in two sugarcane cultivars LCP85-384 (resistant to leaf scald) and ROC20 (susceptible to leaf scald) in response to bacterial pathogen infection and nitrogen implantation dosage. A total of 53 ShWRKY genes with 66 alleles were systematically identified in R570 based on the query sequence SsWRKY in S. spontaneum AP85-441. All ShRWKY alleles were further classified into four groups with 11 (16.7%) genes in group I, 36 (54.5%) genes in group II, 18 (27.3%) genes in group III, and 1 (1.5%) gene in group IV. Among them, 4 and 11 ShWRKY gene pairs displayed tandem and segmental duplication events, respectively. The ShWRKY genes exhibited conserved DNA-binding domains, which were accompanied by variations in introns, exons, and motifs. RT-qPCR analysis of two sugarcane cultivars triggered by Xanthomonas albilineans (Xa) revealed that four genes, ShWRKY13-2/39-1/49-3/125-3, exhibited significant upregulation in leaf scald-resistant LCP85-384. These WRKY genes were downregulated or unchanged in ROC20 at 24-72 h post-inoculation, suggesting that they play an important role in defense responses to Xa infection. Most of the 12 tested ShWRKYs, ShWRKY22-1/49-3/52-1 in particular, functioned as negative regulators in the two cultivars in response to a range of nitrogen (N) implantation doses. A total of 11 ShWRKY proteins were predicted to interact with each other. ShWRKY43 and ShWRKY49-3 are predicted to play core roles in the interaction network, as indicated by their interaction with six other ShWRKY proteins. Our results provide important candidate gene resources for the genetic improvement of sugarcane and lay the foundation for further functional characterization of ShWRKY genes in response to coupling effects of Xa infection and different N levels.

An overview of nanomaterial-based novel disinfection technologies for harmful microorganisms: Mechanism, synthesis, devices and application.

Harmful microorganism (e.g., new coronavirus) based infection is the most important security concern in life sciences and healthcare. This article aims to provide a state-of-the-art review on the development of advanced technology based on nanomaterial disinfection/sterilization techniques (NDST) for the first time including the nanomaterial types, disinfection techniques, bactericidal devices, sterilization products, and application scenarios (i.e., water, air, medical healthcare), with particular brief account of bactericidal behaviors referring to varied systems. In this emerging research area spanning the years from 1998 to 2021, total of ~200 publications selected for the type of review paper and research articles were reviewed. Four typical functional materials (namely type of metal/metal oxides, S-based, C-based, and N-based) with their development progresses in disinfection/sterilization are summarized with a list of synthesis and design. Among them, the widely used silver nanoparticles (AgNPs) are considered as the most effective bacterial agents in the type of nanomaterials at present and has been reported for inactivation of viruses, fungi, protozoa. Some methodologies against (1) disinfection by-products (DBPs) in traditional sterilization, (2) noble metal nanoparticles (NPs) agglomeration and release, (3) toxic metal leaching, (4) solar spectral response broadening, and (5) photogenerated e-/h+ pairs recombination are reviewed and discussed in this field, namely (1) alternative techniques and nanomaterials, (2) supporter anchoring effect, (3) nonmetal functional nanomaterials, (4) element doping, and (5) heterojunction constructing. The feasible strategies in the perspective of NDST are proposed to involve (1) non-noble metal disinfectors, (2) multi-functional nanomaterials, (3) multi-component nanocomposite innovation, and (4) hybrid techniques for disinfection/sterilization system. It is promising to achieve 100% bactericidal efficiency for 108 CFU/mL within a short time of less than 30 min.

Citric acid-assisted phytoextraction of trace elements in composted municipal sludge by garden plants.

Sludge landscaping after compost stabilization is a popular recycling process; however, until trace elements (TEs) are extracted by plants and reduced to safe concentrations, they present a potential exposure risk. Three garden plants, Liriope platyphylla Wang et Tang (L. platyphylla), Iris tectorum Maxim (I. tectorum), and Photinia x fraseri Dress (P. x fraseri), were selected for field experiments, and their ability to phytoremediate TEs and the promotion effect of citric acid (CA) were studied over 3 months of observation. Among the three kinds of plants, L. platyphylla had the highest biomass per unit soil area, and the CA treatment further increased the biomass of this plant per unit soil area as well as the uptake of TEs. When treated with 3 mmol kg-1 CA, L. platyphylla showed increases in the bioconcentration factors of Cu, Zn, Pb, and Cd by 24%, 63%, 27%, and 123%, respectively. Because of the large biomass and high concentrations of TEs, L. platyphylla had high phytoremediation indexes for Zn, Cu, Pb, Ni, and Cd, which reached 18.5, 3.7, 3.2, 2.2, and 0.4 mg m-2, respectively, and were further improved by 60%-187% by the CA treatment. These advantages indicate the potential usefulness of L. platyphylla for phytoremediation. The results provide basic data and technical support for the use of sludge-based compost and phytoremediation by garden plants.

Ecofriendly Microencapsulated Phase-Change Materials with Hybrid Core Materials for Thermal Energy Storage and Flame Retardancy.

Microencapsulated phase-change material (ME-PCM) employing octadecane as a core material has been practiced for thermal-energy-storage (TES) applications in buildings. However, octadecane as a hydrocarbon-based PCM is flammable. Herein, silica-shelled microcapsules (SiO2-MCs) and poly(urea-formaldehyde)-shelled microcapsules (PUF-MCs) were successfully prepared, loaded with octadecane/tributyl phosphate (TBP) as hybrid core materials, which not only exhibited good TES properties but also high-effective flame retardancy. SiO2-MC (ΔHm = 124.6 J g-1 and ΔHc = 124.1 J g-1) showed weaker TES capacity than PUF-MC (ΔHm = 186.8 J g-1, ΔHc = 188.5 J g-1) but better flame retardancy with a lower peak heat-release rate (HRRpeak) of 460.9 W g-1 (556.9 W g-1 for PUF-MCs). As compared with octadecane (38.7 kJ g-1), the reduction in total heat release (THR) for SiO2-MC was up to 22% (30.1 kJ g-1) with combustion time shortened by 1/6. SiO2-MC had a typical diameter of 150-210 µm, shell thickness of ∼6.5 µm, and a core fraction of 84 wt %. SiO2-MC showed better thermal stability with a higher initial evaporation/pyrolysis temperature than PUF-MC. The thermal decomposition of MCs with its mechanism of flame retardancy was significantly studied using thermogravimetric analysis/infrared spectrometry (TG-IR). The strategy presented in this study should inspire the development of microcapsules with PCMs/flame retardants as hybrid core materials for structural applications.

Clarifying the Correlation of Ice Adhesion Strength with Water Wettability and Surface Characteristics.

Although icephobic surfaces have been extensively investigated in the past decades, a controversy remains on the relationship between water repellency and ice repellency. Little insight has been truly obtained on the dependence of ice adhesion on the surface/interface characteristics because of the limited range of these characteristics that have been investigated in the past. In this study, we prepared 37 coatings with a wide range of surface characteristics. The measured ice adhesion strength was discussed in correlation with water wettability and surface topological parameters. It was verified that parameters related to water wettability, such as water contact angle, contact angle hysteresis, and an index of work of adhesion with water, (1 + cos θrec), do not have a simple correlation with ice adhesion strength. Thus, they should not be used as a design parameter for low icephobic surfaces. The current study points out that the study of surface texture should be carried out in conjunction with surface chemistry/energy consideration. Without control of the surface chemistry, the correlation between surface texture parameters will lead to inconsistent conclusions because of the uncertainty of the contact mode. Our investigation indicates that low ice adhesion strength (<50 kPa) is attainable with a smooth surface (root-mean-squared roughness < 50 nm) when a low surface energy (<15 mJ/m2) is maintained. This finding opens a new paradigm for the design of icephobic coatings away from the conventional practices of using superhydrophobic and oil-infused surfaces.

Enhanced BiFeO3/Bi2Fe4O9/H2O2 heterogeneous system for sulfamethoxazole decontamination: System optimization and degradation pathways.

Sulfonamides as the major antibiotic have become emerging contaminants worldwide in aquatic environments. Herein, a heterogeneous Fenton-like oxidation driven by a novel BF-PMCs bismuth ferrites reported firstly for efficient degradation of sulfamethoxazole (SMX) in which the possible degradation pathways are thoroughly analyzed through identifying some of key intermediates (i.e., C8H11N3O4S, C4H4NO2, etc.) using liquid chromatography-mass spectrum (LC-MS), monitoring organic acids (i.e., acetic acid, pyruvic acid) and inorganic anions (i.e., sulfate, nitrate) using ion chromatography (IC), and detecting radical species (i.e., HO) using both chemical quenchers and fluorescence technique, simultaneously. The optimal operations in BF-PMCs/H2O2 system for SMX degradation are recommended at the conditions of initial pH ~4.5, 1.5 mg L-1 [SMX], 70 mM [H2O2], and BF-PMCs loading of 0.2 g L-1. The degradation rates (kinetic value of kapp) for SMX, azoxystrobin, bisphenol A, and 2,4-dichlorophenol are 9.5 × 10-3, 13.6 × 10-3, 7.3 × 10-3, and 5.9 × 10-3 min-1, respectively. Meanwhile, the degradation rates in BF-PMCs/H2O2 system for SMX degradation are slightly slower in the presence of inorganic anions (e.g., Cl-, NO3-) and NOM (e.g., humic acid). Based on an overall consideration, the BF-PMCs/H2O2 system has great potential for degradation of emerging organic pollutants (EOPs) in natural water systems.

Highly Active AuCu-Based Catalysts for Acetylene Hydrochlorination Prepared Using Organic Aqua Regia.

Development of a sustainable process for designing and synthesising an active and stable catalyst for hydrochlorination of acetylene is challenging, yet crucial, for industrial vinyl chloride monomer (VCM) production. Herein, direct synthesis of bimetallic AuCu catalysts using organic aqua regia (OAR) preparation methods was investigated. In comparison with conventional aqua regia (AR), bimetallic AuCu catalysts synthesised from OAR exhibit enhanced activity and stability. After careful characterisation of the catalyst samples using X-ray diffraction patterns (XRD), Scanning transmission electron microscopy (STEM), X-ray photoelectron spectroscopy (XPS), and Temperature-programmed desorption (TPD), this observation was justified for the following reasons: 1) the existence of sulphur and nitrogen atoms stabilised the cationic Au active sites, and 2) OAR helped to sustain the function of the Cu promotor by stabilising it. Advanced understanding on the importance of promoter stability has unveiled new perspectives for this research area.

Design strategies for the development of a Pd-based acetylene hydrochlorination catalyst: improvement of catalyst stability by nitrogen-containing ligands.

Acetylene hydrochlorination is an attractive chemical reaction for the manufacture of polyvinyl chloride (PVC), and the development efforts are focused on the search for non-mercury catalyst systems. Supported Pd-based catalysts have relatively high activity in the catalytic hydrochlorination of acetylene but are still deactivated rather quickly. Herein, we demonstrated that the atomically dispersed (NH4)2PdCl4 complex, distributed on activated carbon, enabled the highly active and stable production of the vinyl chloride monomer (VCM) through acetylene hydrochlorination under low temperature conditions. We found that the presence of nitrogen-containing ligands in the structure of the active center could remarkably improve the stability of the Pd-based catalysts when compared with the case of the conventional PdCl2 catalyst. Further analyses via X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and temperature-programmed reduction (TPR) show that the variations in the Pd dispersion, chemical state and reduction property are caused by the nitrogen-containing ligands. Temperature-programmed desorption (TPD) characterizations illustrated that the N-containing ligands over the (NH4)2PdCl4/AC catalyst might enhance the adsorption of HCl. These findings suggest that in addition to strategies that target the doping modification of support materials, optimization of the structure of the active center complexes provides a new path for the design of highly active and stable Pd-based catalysts.

Catalytic Ozonation for the Degradation of 5-Sulfosalicylic Acid with Spinel-Type ZnAl2O4 Prepared by Hydrothermal, Sol-Gel, and Coprecipitation Methods: A Comparison Study.

This study presents a novel spinel-type zinc aluminate nanometer catalyst and is applied in catalytic ozonation for wastewater treatment. The zinc aluminate (ZnAl2O4) catalysts were synthesized by hydrothermal, sol-gel, and coprecipitation methods, and their characteristics were analyzed by X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray spectrum, Fourier transform infrared, and X-ray photoelectron spectroscopy (XPS) techniques. 5-Sulfosalicylic acid (SSal) was selected as the typical pharmaceutical and personal care product and used to evaluate the catalytic activity of ZnAl2O4. Compared to ozonation, an obviously higher removal efficiency for the SSal degradation was achieved with the nanocatalyst addition in catalytic ozonation. The removal of SSal and chemical oxygen demand reached 64.8 and 46.2%, respectively, after 60 min in the presence of ZnAl2O4, whereas it was only 49.4 and 33.2%, respectively, in ozonation. The comparison of catalysts showed that the ZnAl2O4 prepared by the hydrothermal method presented a better catalytic activity in ozonation. The effect of radical scavenger experiment results and the characterization of XPS implied that •OH was the main active oxidative species in catalytic ozonation. The reusability results showed that the ZnAl2O4 catalyst possessed a high stability and could be widely used in catalytic ozonation for wastewater treatment.

Controllable mullite bismuth ferrite micro/nanostructures with multifarious catalytic activities for switchable/hybrid catalytic degradation processes.

In this work, controllable preparation of micro/nanostructured bismuth ferrites (BFOs) were used to investigate multifarious heterogeneous catalyses, including Fenton/Fenton-like reaction, photocatalysis, photo-Fenton oxidation, and peroxymonosulfate (PMS) activation. Results showed that BFO can be used asa novel catalyst to activate switchable catalytic degradation of organic matters. Additionally, a novel catalytic system for degradation of organic pollutants, which integrating all-above heterogeneous catalyses is denoted as BFO/H2O2/PMS hybrid reaction, is introduced for the first time. BFO/H2O2/PMS system effectively degraded>99% for both methyl orange (MO) and sulfamethoxazole (SMX) within 60min, which shows better efficiency than above BFO-driven catalyses. The major SMX degradation pathway in BFO/H2O2/PMS system is proposed via detecting intermediates using LC/MS/MS. It was found that catalytic activities of BFOs are in the order of BFO-L (co-precipitation, micro/nanosize, single crystals exposing facet (001))>BFO-H (hydrothermal, nanocluster with a higher surface area than other BFOs)>BFO-C (fabricated using calcination process, microsize), which demonstrated that crystallographic orientation is more significant in heterogeneous catalyses than specific surface area at micro/nanoscale. Besides, the required H2O2 consumption for achieving 99% TOC removal was identified in BFO-driven photo-Fenton oxidation. The other effects on degradation efficiency, such as H2O2 dosage and pH, were investigated as well. In Fenton/Fenton-like reaction, reaction conditions suggested are ∼61.5mM H2O2 dosage and pH≥4.5 to avoid quenching of HO into HO2 by excessive H2O2 and Fe leaching.

Magnetically recyclable Bi/Fe-based hierarchical nanostructures via self-assembly for environmental decontamination.

Pristine bismuth ferrite usually possesses weak magnetic properties (e.g., saturation magnetization Ms < 3 emu g(-1)) for practical magnetic separation applications. Herein, a superparamagnetic bismuth ferrite with coral-like hierarchical morphology (BFO-M) was fabricated through methanol solvothermal treatment of the as-prepared Bi2Fe4O9 nanoclusters (P-BFO). The BFO-M shows a higher Ms of ∼31 emu g(-1) compared to that of P-BFO treated in water (BFO-A), in ethanol (BFO-E) and in ethylene glycol (BFO-G). Compared to single-crystalline Bi2Fe4O9 (PS) and Bi2Fe4O9 clusters (NSP), BFO-M shows an excellent organic pollutant removal rate by virtue of its high adsorption capacity and catalytic activity when methyl orange (MO) is used as the model organic pollutant. BFO-M also exhibits good visible light photo-Fenton oxidation rates for pharmaceuticals and pesticides. Even at a low catalyst loading of 0.12 g L(-1), the removal rate of organic pollutants (e.g., 5-fluorouracil, isoproturon) can be ∼99% in 100 min under visible light irradiation. Besides, BFO-M is also a good adsorbent for different kinds of heavy metal ions (Pb(ii), Cr(iii), Cu(ii), As(v), etc.). For example, its maximal adsorption capacity for Pb(ii) is 214.5 mg g(-1). The used BFO-M can be recovered via magnetic separation. The outstanding performances of BFO-M can be ascribed to its coral-like hierarchical morphology which consists of the self-assembly of 1D nanowires (∼6 nm in diameter) and 2D ultrathin nanoflakes (∼4.5 nm in thickness). A schematic illustration of its morphology formation is proposed.

Expression and clinical significance of tyrosine phosphatase SHP2 in thyroid carcinoma.

Protein-tyrosine phosphatase SHP2 is encoded by the gene PTPN11. SHP2 is hypothesized to have a critical role in cancer, via the activation of mutations that have been detected in several types of leukaemia and in certain solid tumours, including liver, breast, gastric and cervical cancer. However, to the best of our knowledge, there have been no previous reports evaluating the significance of SHP2 expression in thyroid cancer. The present study evaluated SHP2 expression in 65 thyroid cancer specimens, 40 specimens of self-matched adjacent peritumour tissues and 40 specimens of normal thyroid tissue, using immunohistochemical and western blot analyses with an anti-SHP2 antibody. Western blotting was also used to assess SHP2 expression in thyroid cancer cell lines (SW579, IHH-4, FTC-133, TPC-1, DRO, TA-K, and ML-1) and Nthy-ori3-1 normal thyroid cells. In addition, SHP2 antisense oligonucleotides were used to block SHP2 expression in SW579 cells, and growth inhibition assays were conducted. Increased SHP2 expression was detected in the tumour tissues compared with that of the normal thyroid tissues (P<0.05). SHP2 expression was significantly correlated with poor tumour differentiation (P<0.05), late TNM stage (P<0.05) and lymph node metastasis (P<0.05), suggesting that SHP2 may represent a potential target for thyroid cancer therapy.