Vanin-1-Activated Chemiluminescent Probe: Help to Early Diagnosis of Acute Kidney Injury with High Signal-to-Noise Ratio through Urinalysis.

Acute kidney injury (AKI) is a common medical condition with high morbidity and mortality. Although urinalysis provides a noninvasive and convenient diagnostic method for AKI at the molecular level, the low sensitivity of current chemical probes used in urinalysis hinders the time diagnosis of AKI. Herein, we achieved the sensitive and early diagnosis of AKI by the development of a chemiluminescent probe CL-Pa suitable for detection of urinary Vanin-1. Vanin-1 is considered as an early and sensitive biomarker for AKI, while few chemical probes have been applied to for its efficient detection. By virtue of the low autofluorescence interference during urine imaging in the chemiluminescence model, CL-Pa could realize the monitoring of the up-regulated urinary Vanin-1 with a high signal-to-noise ratio (∼588). Importantly, under the help of CL-Pa, the up-regulation of urinary Vanin-1 of cisplatin-induced AKI mice at 12 h post cisplatin injection was detected, which was much earlier than clinical biomarkers (sCr and BUN) and change of kidney histology (48 h post cisplatin injection). Furthermore, using this probe, the fluctuation of urinary Vanin-1 of mice with different degrees of AKI was monitored. This study demonstrated the ability of CL-Pa in sensitively detecting drug-induced AKI through urinalysis and suggested the great potential of CL-Pa for early diagnosis of AKI and evaluate the efficiency of anti-AKI drugs clinically.

Engineering of a novel D-A type fluorophore with hydrogen bond-induced enhanced emission property for sensitively detecting endogenous HOCl in living cells and tissues.

Fluorescence imaging has been widely employed for biomedical research and clinical diagnostics. With ease of synthesis and excellent photophysical properties, D-A type fluorophores are widely designed for fluorescence imaging. However, traditional D-A type fluorophores are solvatochromic which reduces the fluorescence brightness in the biological system. To solve this problem and build on our previous work, we devised a novel HIEE fluorophore MTC with typical anti-solvatochromic fluorescence. Furthermore, the activated fluorescent probe designed based on MTC showed excellent imaging performance. We believe that the strategy based on the fluorophores with typical anti-solvatohromic fluorescence can be a useful platform for designing fluorescent probes for high-brightness imaging in the biological system.

Hydrogen-bond-driven self-assembly of chemiluminophore affording long-lasting in vivo imaging.

Developing chemiluminescence probe with a slow kinetic profile, even a constant emission within analytical time, would improve the analytical sensitivity, but still remains challenging. This work reports a novel strategy to afford long-lasting in vivo imaging by developing a self-assembled chemiluminophore HPQCL-Cl via the introduction of the hydrogen-bond-driven self-assembled dye HPQ to Schaap's dioxetane. Compared with classical chemiluminophore HCL, self-assembled HPQCL-Cl was isolated from the physiological environment, thereby lowering its deprotonation and prolonging its half-life. Based on HPQCL-Cl, the long-lasting in vivo imaging of 9L-lacz tumor was achieved by developing a ß-gal-responsive probe. Its signals remained constant (<5% change) for about 20 min, which may provide a wide time window for the determination of ß-gal. This probe also showed high tumor-to-normal tissue ratio throughout tumor resection, highlighting its potential in image-guided clinical surgery.

High-fidelity imaging of lysosomal enzyme through in situ ordered assembly of small molecular fluorescent probes.

As an organelle in cells, lysosomes play an important role in the degradation of biological macromolecules and pathogens. To elucidate the function of lysosomes in normal or disease states, recently, various fluorescent probes have been reported for imaging lysosomal analytes. However, because of the particularity of the lysosomal environment, most of the reported lysosomal fluorescent probes suffered from a series of practical issues such as easy diffusion, low detection signal-to-background ratio and false signal. To address these issues, based on an optimized in situ ordered assembly solid-state fluorophore HDPQ, we herein put forward a new strategy for the design of lysosomal enzymes probes. As a proof concept, we synthesized a fluorescent probe HDPQ-GLU for lysosomal enzyme ß-glucuronidase (GLU). Experiment results displayed that compared with general lysosomal probe, the novel lysosomal probe not only exhibited excellent anti-pH interference ability and high signal-to-noise ratio in aqueous solution, but also has excellent long-term in situ imaging ability in the living system. Using this probe, we have realized high-fidelity and long-term in situ tracking GLU in lysosomes of living cells and evaluated the dynamic changes of GLU during the growth period of zebrafish. We anticipate that the new strategy based on the novel in situ ordered assembly solid-state fluorophore HDPQ may be a potential platform for developing fluorescent probes for high-fidelity imaging of lysosomal enzymes.

Selective detection of ozone in inflamed mice using a novel activatable chemiluminescent probe.

We report here an activatable chemiluminescent probe CL-O3 for the high-contrast imaging of O3in vivo. CL-O3 exhibited a high selectivity toward O3 and was able to evaluate the degree of inflammation in mice by detecting endogenous O3 levels in acute inflamed mice.

Molecular engineering of organic-based agents for in situ bioimaging and phototherapeutics.

In situ monitoring of the location and transportation of bioactive molecules is essential for deciphering diverse biological events in the field of biomedicine. In addition, obtaining the in situ information of lesions will provide a clear perspective for surgeons to perform precise resection in clinical surgery. Notably, delivering drugs or operating photodynamic therapy/photothermal therapy in situ by labeling the lesion regions of interest can improve treatment and reduce side effects in vivo. In various advanced imaging and therapy modalities, optical theranostic agents based on organic small molecules can be conveniently modified as needed and can be easily internalized into cells/lesions in a non-invasive manner, which are prerequisites for in situ bioimaging and precision treatment. In this tutorial review, we first summarize the in situ molecular immobilization strategies to retain small-molecule agents inside cells/lesions to prevent their diffusion in living organisms. Emphasis will be focused on introducing the application of these strategies for in situ imaging of biomolecules and precision treatment, particularly pertaining to why targeting therapy in situ is required.

Learning from Artemisinin: Bioinspired Design of a Reaction-Based Fluorescent Probe for the Selective Sensing of Labile Heme in Complex Biosystems.

Labile heme (LH) is an important signaling molecule in virtually all organisms. However, specifically detecting LH remains an outstanding challenge. Herein, by learning from the bioactivation mechanism of artemisinin, we have developed the first LH-responsive small-molecule fluorescent probe, HNG, based on a 4-amino-1,8-naphthalimide (NG) fluorophore. HNG showed high selectivity for LH without interference from hemin, protein-interacting heme, and zinc protoporphyrin. Using HNG, the changes of LH levels in live cells were imaged, and a positive correlation of LH level with the degree of hemolysis was uncovered in hemolytic mice. Our study not only presents the first molecular probe for specific LH detection but also provides a strategy to construct probes with high specificity through a bioinspired approach.

The performance of UiO-66-NH2/graphene oxide (GO) composite membrane for removal of differently charged mixed dyes.

The dye wastewater treatment by membrane separation technology has obtained extensive attention in recent years. Nevertheless, it was rare for research on the removal of differently charged mixed dyes. In this study, several UiO-66-NH2 composite membranes were prepared and optimization experiments were conducted. The performance of composite membranes were evaluated by the removal of cationic (Methylene blue, MB), neutral (Rhodamine B, RB), and anionic (Congo red, CR) dyes. The optimization results demonstrated that the UiO-66-NH2/graphene oxide (UNG) composite membrane (PUF/PDA/UNG) which was loaded on polyurethane foam modified with polydopamine (PUF/PDA) had the best properties. In filtration experiments, the solution pH exhibited greater effect on the removal efficiency of MB and CR than RB. When NaCl, KCl, CaCl2 and Na2SO4 coexisted in the dye solution, the removal efficiency of MB by PUF/PDA/UNG membrane were 96.62%, 98.17%, 86.39% and 99.34% respectively. The presence of humic acid showed slight inhibitory effect on the removal of MB by PUF/PDA/UNG membrane (71.93%). The experimental results for mixed dyes filtration showed that PUF/PDA/UNG membrane could effectively remove MB, RB and CR in binary (i.e., MB/RB and RB/CR) and ternary (i.e., MB/RB/CR) systems through secondary filtration. And PUF/PDA/UNG membrane could remove MB and CR simultaneously through one-time filtration in MB/CR binary system. The removal mechanism was mainly attributed to the aggregation of mixed dyes, electrostatic interaction between dye molecules and the membrane surface, and hydrogen bonding. All results suggested that the as-prepared PUF/PDA/UNG membrane have great potential in practical treatment of dye wastewater.

A cell membrane-anchored fluorescent probe for monitoring carbon monoxide release from living cells.

Carbon monoxide (CO) acts as an important gasotransmitter in delivering intramolecular and intermolecular signals to regulate a variety of physiological processes. This lipid-soluble gas can freely pass through the cell membrane and then diffuse to adjacent cells acting as a messenger. Although many fluorescent probes have been reported to detect intracellular CO, it is still a challenge to visualize the release behavior of endogenous CO. The main obstacle is the lack of a probe that can anchor onto the cell membrane while having the ability to image CO in real time. In this work, by grafting a polar head onto a long and linear hydrophobic Nile Red molecule, a cell membrane-anchored fluorophore ANR was developed. This design strategy of a cell membrane-anchored probe is simpler than the traditional one of using a long hydrophobic alkyl chain as a membrane-anchoring group, and endows the probe with better water solubility. ANR could rapidly bind to the cell membrane (within 1 min) and displayed a long retention time. ANR was then converted to a CO-responsive fluorescent probe (ANRP) by complexation with palladium based on a metal palladium-catalyzed reaction. ANRP exhibited a fast response to CO with a 25-fold fluorescence enhancement in vitro. The detection limit was calculated to be 0.23 µM, indicating that ANRP is sensitive enough to image endogenous CO. Notably, ANRP showed excellent cell membrane-anchoring ability. With ANRP, the release of CO from HepG2 cells under LPS- and heme-stimulated conditions was visualized and the cell self-protection effect during a drug-induced hepatotoxicity process was also studied. Moreover, ANRP was successfully applied to the detection of intracellular CO in several cell lines and tissues, and the results demonstrated that the liver is the main organ for CO production, and that cancer cells release more CO from their cells than normal cells. ANRP is the first membrane-anchored CO fluorescent probe that has the ability to reveal the relationship between CO release and diseases. It also has prospects for the studying of intercellular signaling functions of CO.

Nanoscale Metal-Organic Framework Based Two-Photon Sensing Platform for Bioimaging in Live Tissue.

Nanoscale metal-organic frameworks (NMOFs) have been applied for biomedical sensing in recent years. However, it is still a great challenge to construct a highly efficient NMOFs fluorescent probe for sensing in a biological system, with high signal-to-noise ratio, photostability, and deep tissue penetration. Herein, for the first time, we report the two-photon metal-organic framework (TP-MOF) as a sensing platform. The design of TP-MOF is based on NMOFs incorporating a target-responsive two-photon organic moiety through click chemistry. PCN-58, as a model building block, was covalently modified with a small-molecule probe for H2S or Zn2+ as model analytes. TP-MOF probes retain the fluorescence-responsive properties of the TP organic moiety and possess excellent photostability and selectivity, as well as biocompatibility. Benefiting from the near-infrared (∼820 nm) excited two-photon fluorophore, TP-MOF probes serve to sense and image their respective targets in live cells and tissue slices with a penetration of 130 µm. The molecular design presented here bodes well for the extension to other MOFs displaying sensing components for other analytes of interest.

In Situ Imaging of Furin Activity with a Highly Stable Probe by Releasing of Precipitating Fluorochrome.

Furin, a kind of trans-Golgi proprotein convertases, plays important role in various physiological processes. It is overexpressed in many cancers and relates to tumor growth and migration. In situ detection and imaging of furin is of great significance for obtaining real-time information about its activity. However, the previously reported fluorescent probes for furin usually failed to realize in situ detection and long-term bioimaging, because these probes are based on water-soluble fluorophores, which tend to diffuse away from the reaction sites after converted by furin. Such a problem can be addressed by designing a probe, which releases a precipitating fluorophore upon furin conversion. Herein, we developed a probe HPQF for in situ detection of endogenous furin activity and long-term bioimaging by integrating a strictly insoluble solid-state fluorophore 6-chloro-2-(2-hydroxyphenyl) quinazolin-4(3H)-one (Cl-HPQ) with a furin specific peptide substrate (RVRR) through a self-immolative linker. The HPQF probe shows high selectivity and sensitivity to furin. Upon converted by furin, HPQF releases free Cl-HPQ, which precipitates near the enzyme active site. The precipitates emit bright solid-state fluorescence for in situ imaging. HPQF could truly visualize the location of intracellular furin, which was further confirmed by colocalization and immunofluorescence experiments. Excitingly, the long-term bioimaging was also achieved benefiting from its outstanding signal-stability and antidiffusion ability. HPQF was further utilized to monitor the level change of furin under stabilizing of hypoxia-inducible factor (HIF) regulated by cobalt chloride (CoCl2) as well as visualization of furin in MDA-MB-468 cell tumor tissues.

Zirconium-based metal organic frameworks loaded on polyurethane foam membrane for simultaneous removal of dyes with different charges.

Treating dye wastewater by membrane filtration technology has received much attention from researchers all over the world, however, current studies mainly focused on the removal of singly charged dyes but actual wastewater usually contains dyes with different charges. In this study, the removal of neutral, cationic and anionic dyes in binary or ternary systems was conducted by using zirconium-based metal organic frameworks loaded on polyurethane foam (Zr-MOFs-PUF) membrane. The Zr-MOFs-PUF membrane was fabricated by an in-situ hydrothermal synthesis approach and a hot-pressing process. Neutrally charged Rhodamine B (RB), positively charged Methylene blue (MB), and negatively charged Congo red (CR) were chosen as model pollutants for investigating filtration performance of the membrane. The results of filtration experiments showed that the Zr-MOFs-PUF membrane could simultaneously remove RB, MB, and CR not only from their binary system including RB/MB, RB/CR, and MB/CR mixtures, but also from RB/MB/CR ternary system. The removal of dyes by Zr-MOFs-PUF membrane was mainly attributed to the electrostatic interactions, hydrogen bond interaction, and Lewis acid-base interactions between the membrane and dye molecules. The maximum removal efficiencies by Zr-MOFs-PUF membrane were 98.80% for RB at pH ≈ 7, 97.57% for MB at pH ≈ 9, and 87.39% for CR at pH ≈ 3. Additionally, when the NaCl concentration reached 0.5 mol/L in single dye solutions, the removal efficiencies of RB, MB, and CR by Zr-MOFs-PUF membrane were 93.08%, 79.52%, and 97.82%, respectively. All the results suggested that the as-prepared Zr-MOFs-PUF membrane has great potential in practical treatment of dye wastewater.

Ultrathin reduced graphene oxide/MOF nanofiltration membrane with improved purification performance at low pressure.

Here we demonstrated an alternative partial reduction graphene oxide/metal-organic frameworks nano-scale laminated membrane for dyes and heavy metal ions removal at low pressure. Compared with pure prGO membranes, the novel UiO-66-(COOH)2/prGO membranes with loose structure and excellent selective permeability demonstrated significant enhancements of permeation for low-pressure nanofiltration. The UiO-66-(COOH)2/prGO membranes possess more nanochannels structure, high surface charge and stability, which were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM). The experiment result indicated that the flux of composite membranes for pure water was 20.0 ±â€¯2.5 Lm-2h-1bar-1, about 2.9 times higher than that (6.5 ±â€¯1.2 Lm-2h-1bar-1) of the pristine prGO membranes at the same prGO loading. The high rejection of UiO-66-(COOH)2/prGO membranes for organic dyes (98.2 ±â€¯1.7% for negatively charged congo red and 92.55 ±â€¯2.5% for positively charged methylene blue) were exhibited. Moreover, the rejection for heavy metal ions also can be efficiently improved up to 96.5-83.1% for Cu2+ and 92.6-80.4% for Cd2+, indicating the positive effect of the electrostatic interaction on the nanochannels for ions. Therefore, it is reasonable to believe that novel UiO-66-(COOH)2/prGO membranes have great potential application in water treatment.

Two-Photon DNAzyme-Gold Nanoparticle Probe for Imaging Intracellular Metal Ions.

RNA-cleaving DNAzymes have been demonstrated as a promising platform for sensing metal ions. However, the poor biological imaging performance of RNA-cleaving DNAzyme-based fluorescent probes has limited their intracellular applications. Compared with traditional one-photon fluorescence imaging, two-photon (TP) fluorescent probes have shown advantages such as increased penetration depth, lower tissue autofluorescence, and reduced photodamage. Herein, for the first time, we developed an RNA-cleaving DNAzyme-based TP imaging probe (TP-8-17ES-AuNP) for Zn2+ detection in living cells by modifying a Zn2+-specific DNAzyme (8-17) with a TP fluorophore (TP-8-17ES) and using gold nanoparticles (AuNPs) for intracellular delivery. The modified TP-8-17ES exhibits good two-photon properties and excellent photostability. For the TP-8-17ES-AuNP, in the absence of Zn2+, the TP fluorophore is quenched by both AuNPs and the molecular quencher. Only in the presence of Zn2+ does the DNAzyme cleave the TP fluorophore-labeled substrate strand, resulting in fluorescence enhancement and TP imaging. Such probe shows remarkable selectivity of Zn2+ over other metal ions existing in the biological environment. Benefiting from the labeled TP fluorophore, the near-infrared (NIR) excited probe has the capability of TP imaging of Zn2+ in living cells and tissue with a deep tissue penetration up to 160 µm. This method can be generally applied to detect other metal ions in biological systems under TP imaging with higher tissue penetration ability and lower phototoxicity.

Visualization of Endoplasmic Reticulum Aminopeptidase 1 under Different Redox Conditions with a Two-Photon Fluorescent Probe.

Endoplasmic reticulum aminopeptidase 1 (ERAP1), a metallopeptidase belonging to the M1 peptidase family, plays an important role in antigen processing in vivo. Additionally, many diseases are caused by ERAP1 perturbation. Thus, an efficient method for monitoring its content is extremely important for disease diagnosis and treatment. However, few fluorescent probes have been reported for efficiently monitoring ERAP1 in living cells and tissues. In this work, a two-photon fluorescent probe (SNCL) containing 1,8-naphthalimide (two-photon fluorophore), l-leucine (trigger moiety), and a methyl sulfonamide moiety (endoplasmic reticulum-targeting group) for imaging ERAP1 activity in living cells is reported for the first time. The optimized probe exhibited high sensitivity toward ERAP1, with about a 95-fold fluorescence enhancement at 550 nm. Herein, we monitored ERAP1 with SNCL by introducing interferon-γ to induce ERAP1 activity in living cells. The content of ERAP1 was dependent on the redox state of the endoplasmic reticulum, which was demonstrated by using SNCL to monitor the enzymatic activity of ERAP1 under different redox conditions. Excitingly, SNCL was also successfully applied for monitoring ERAP1 in tumor tissue with an imaging depth of 50-120 µm. In conclusion, SNCL not only can be used for the sensitive detection of endogenous ERAP1 in living cells and tumor tissues but also can serve as a potentially useful tool to reveal ERAP1-related diseases.

Graphene sponge decorated with copper nanoparticles as a novel bactericidal filter for inactivation of Escherichia coli.

Nanotechnology has great potential in water purification. However, the limitations such as aggregation and toxicity of nanomaterials have blocked their practical application. In this work, a novel copper nanoparticles-decorated graphene sponge (Cu-GS) was synthesized using a facile hydrothermal method. Cu-GS consisting of three-dimensional (3D) porous graphene network and well-dispersed Cu nanoparticles exhibited high antibacterial efficiency against Esherichia coli when used as a bactericidal filter. The morphological changes determined by scanning electron microscope and fluorescence images measured by flow cytometry confirmed the involvement of membrane damage induced by Cu-GS in their antibacterial process. The oxidative ability of Cu-GS and intercellular reactive oxygen species (ROS) were also determined to elucidate the possible antibacterial mechanism of Cu-GS. Moreover, the concentration of released copper ions from Cu-GS was far below the drinking water standard, and the copper ions also have an effect on the antibacterial activity of Cu-GS. Results suggested that Cu-GS as a novel bactericidal filter possessed a potential application of water disinfection.

Polyurethane foam membranes filled with humic acid-chitosan crosslinked gels for selective and simultaneous removal of dyes.

Polyurethane foam membrane filled with humic acid-chitosan crosslinked gels (HA-CS-PUF) for dye removal was prepared by soaking the foams into humic acid-chitosan (HA-CS) crosslinked gels and hot-pressing them into membranes. Scanning electron microscope, derivative thermogravimetry and X-ray photoelectron spectroscopy were used to characterize the HA-CS-PUF membrane. Results showed that the interaction of HA and CS was mainly through ionic cross-linking between carboxyl and protonated amino groups. Three types of dyes, including positively charged methylene blue (MB), neutrally charged rhodamine B (RB) and negatively charged methyl orange (MO), were used to test membranes properties through static adsorption and membrane filtration experiments. It revealed that adsorption process was better fitted with Pseudo-second-order and Freundlich model. In membrane filtration experiments, we found that the retention rates of membrane 1 (ratio of HA to CS was 0:1) to MO and RB were 99.7% and 65%, respectively, and nearly no retention to MB. While membrane 4 (ratio of HA to CS was 0.2:1) can retain 97.7% of MO, 71.6% of RB and 62.1% of MB. Based on the experimental results, membrane 1 possessed the ability of selectively separating MB from MO/MB and RB/MB solutions, and membrane 4 can simultaneously retain RB and MB from RB/MB solution.

Carbon nanotube-impeded transport of non-steroidal anti-inflammatory drugs in Xiangjiang sediments.

Carbon nanotubes (CNTs), usually with a superior affinity with organic chemicals, are expected to ultimately released to the environment through their manufacturing, usage, and eventual disposal, which will influence the mobility and environmental risk of nonsteroidal anti-inflammatory drugs (NSAIDs). In this study, batch and column experiments were performed to examine the effects of two kinds of multi-walled carbon nanotubes (MWCNTs: MWCNT2040, MWCNT0815) and one kind of single-walled carbon nanotubes (SWCNTs) on the environmental fate of two NSAIDs, paracetamol (PA) and diclofenac sodium (DS), in sediments. Impact ways of CNTs including addition in inflow and mixing with sediments were investigated. The adsorption capacity of NSAIDs on sediments increased with increasing CNTs/sediments ratios and in an order of MWCNT2040

Generation of Biostable L-aptamers against Achiral Targets by Chiral Inversion of Existing D-aptamers.

In this paper, based on reciprocal chiral substrate specificity, taking achiral molecules, ethanolamine (EA) and malachite green (MG) as two model targets, biostable L- DNA aptamers and L-RNA aptamers were generated respectively by chiral inversion of existing D-aptamers. In the detection of EA with L-DNA aptamer-based sensors, the feasibility of our strategy was confirmed, while in the detection of MG with L-RNA aptamers, linear calibration curves were obtained in the range from 0.1 to 5µm with the detection limit of 0.065µm under optimized experimental conditions. The results demonstrated that the mirror-image L-aptamers have identical recognition capability as D-aptamers. Meanwhile, L-aptamers have superior biostability to resist nuclease digestion, protein binding interference and off-target effects, enabling their applications in complex practical samples, such as lake water and fish tissue extractions. Our work provides a simple, yet universal and efficient way to develop biostable aptamers.

Fluorescence Resonance Energy Transfer-based Biosensor Composed of Nitrogen-doped Carbon Dots and Gold Nanoparticles for the Highly Sensitive Detection of Organophosphorus Pesticides.

The present article reports a novel biosensor for organophosphorus pesticides based on fluorescence resonance energy transfer (FRET) between nitrogen-doped carbon dots (NC-dots) and gold nanoparticles (AuNPs). The effective NC-dots/AuNPs assembly through the Au-N interaction results in good fluorescence quenching. Active acetylcholinesterase (AChE) catalyzes the hydrolysis of acetylthiocholine into -SH containing thiocholine to replace the NC-dots and trigger the aggregation of AuNPs. In the presence of paraoxon, the activity of AChE is inhibited, and thus preventing the generation of thiocholine, causing fewer NC-dots to be replaced. As a consequence, the fluorescence intensity gradually decreases with increasing amount of paraoxon. This biosensor does not require any complex synthesis or modification, and the results show a wide detection range of from 10(-4) to 10(-9) g/L with a detection limit of 1.0 × 10(-9) g/L (3.6 × 10(-12) mol/L). Two linear response regions have been reported with a turning point at about 10(-6) g/L and three different factors that would influence the response behavior. These phenomena discussed in detail so as to explain the special response mechanism.