Sucrose-derived porous carbon catalyzed lignin depolymerization to obtain a product with application in type 2 diabetes mellitus.

As the most important phenolic biopolymer in nature, lignin shows promising application potentialities in various bioactivities in vivo and in vitro, mainly including antioxidant, anti-inflammatory, hypolipidemic, and antidiabetic control. In this work, several carbon-based solid acids were synthesized to catalyze the fragmentation of organosolv lignin (OL). The generated lignin fragments, with controllable molecular weight and functional groups, were further evaluated for their application in the prevention and treatment of type 2 diabetes mellitus (T2DM). The results suggested that the urea-doped catalyst (SUPC) showed a more excellent catalytic performance in producing diethyl ether insoluble lignin (DEIL) and diethyl ether soluble lignin (DESL). In addition, the lignin fragments have a good therapeutic effect on the cell model of T2DM. Compared with the insulin resistance model, DEIL obtained by catalytic depolymerization of OL with SUPC could improve the glucose consumption of insulin-resistant cells. Moreover, low-concentration samples (50 µg/mL) can promote glucose consumption (19.7 mM) more than the traditional drug rosiglitazone (17.5 mM). This work demonstrates the prospect of depolymerized lignin for the prevention and treatment of T2DM and provides a new application field for lignin degradation products.

Optimizing lignin demethylation using a novel proton- based ionic liquid: 1, 2-propanediamine/glycolic acid catalyst.

Demethylation modification of lignin is an effective strategy to overcome the barrier to its high-value conversion. The purpose of this study focuses on the new proton-based ionic liquid (PIL) 1, 2-propanediamine/glycolic acid (PD/GA) as a catalyst and solvent to achieve the targeted oxidation of lignin. The PD/GA solvents have higher selectivity and efficiency. Optimal phenolic hydroxyl (PH)-increment was achieved, demonstrating enhanced demethylating effect on lignin by modulating the acid-base molar ratio, reaction temperature, and reaction time. Compared to ethanolamine/acetic acid (CE/AC) treatment, the PD/GA treatment at molar ratio 1.25, temperature 60 °C, and 3 h increased the PH-content from 37.74 to 59.91 %. Additionally, the lignin treated with PD/GA exhibited excellent recyclability, featuring a larger Brunauer-Emmett-Teller surface area (1.45 m2.g-1), total pore volume (9.51*10-3 cm3.g-1), and mesoporous size (26.15 nm). The treated lignin yielded maximum ultraviolet resistance and antioxidant activity. These results present new avenues for the development of green and efficient lignin demethylation methods.

Water training initiates spatially regulated microstructures with competitive mechanics in hydroadaptive polymers.

The strategy using water as a medium for dynamic modulation of competitive plasticity and viscoelasticity provides a unique perspective to attain adaptive materials. We reveal sustainable polymers, herein cellulose phenoxyacetate as a typical example, with unusual water-responsive dual-mechanic functionalities addressed via a chronological water training strategy. The temporal significance of such water-responsive mechanical behaviors becomes apparent considering that a mere 3-minute exposure or a prolonged 3-hour exposure to water induced different types of mechano-responsiveness. This endows the materials with multiple recoverable shape-changes during water and air training, and consequently even underlines the switchability between the pre-loaded stable water shapes (> 20 months) and the sequentially fixed air shapes. Our discovery exploits the competitive mechanics initiated by water training, enabling polymers with spatially regulated microstructures via their inherently distinct mechanical properties. Insights into the molecular changes represents a considerable fundamental innovation, can be broadly applicable to a diverse array of hydroadaptive polymers.

Polysaccharides extracted from larvae of Lucilia sericata ameliorated ulcerative colitis by regulating the intestinal barrier and gut microbiota.

Pest management technology has been a promising bioconversion method for waste resource utilization. Unlike many pests that consume waste, the larvae of Lucilia sericata, also known as maggots, have many outstanding advantages as following: with their strong adaption to environment and not easily infected and exhibiting a medicinal nutritional value. Herein, the potential efficacies of maggot polysaccharides (MP), as well as their underlying mechanisms, were explored in Dextran sulfate sodium (DSS)-induced colitis mice and TNF-α-elicited Caco-2 cells. We extracted two bioactive polysaccharides from maggots, MP-80 and MP-L, whose molecular weights were 4.25 × 103 and 2.28 × 103 g/mol, respectively. MP-80 and MP-L contained nine sugar residues: 1,4-α-Arap, 1,3-ß-Galp, 1,4,6-ß-Galp, 1,6-α-Glcp, 1-α-Glcp, 1,4-ß-Glcp, 1-ß-Xylp, 1,2-α-Manp, and 1-ß-Manp. We demonstrated that MP-80 and MP-L significantly ameliorated DSS-induced symptoms and histopathological damage. Immuno-analysis revealed that compared with MP-L, MP-80 could better restore intestinal barrier and reduced inflammation by suppressing NLRP3/NF-κB pathways, which might be attributed to its enriched galactose fraction. Moreover, 16S rRNA sequencing revealed that MP-80 and MP-L both improved the dysbiosis and diversity of gut microbiota and acted on multiple microbial functions. Our study sheds new light on the possibility of using maggot polysaccharides as an alternative therapy for colitis.

Polysaccharides from Russula: a review on extraction, purification, and bioactivities.

Russula, a renowned edible fungus, has gained popularity as a functional food among diverse populations due to the abundant presence of amino acids, proteins, and polysaccharides. As the primary constituents of Russula, polysaccharides exhibit a wide range of biological properties, making them an exceptional choice for incorporation into food, medicines, and diverse biotechnological applications. This review provides a summary of the recent research on the extraction, purification, and biological applications of polysaccharides from various Russula spp. Currently, there are many advanced extraction technologies, such as hot water-based extraction, alkali-based extraction, ultrasonic-assisted extraction and microwave-assisted extraction. Hence, the latest progress of extraction technologies, as well as their advantages and limitations will be discusses and summarizes in this review. The separation and purification methods of polysaccharide from Russula were introduced, including ethanol precipitation, deproteinization and gel filtration chromatography. It also focuses on exploring the diverse bioactive capabilities of Russula, including anti-oxidant, anti-tumor, immunomodulatory, anti-inflammation, and anti-bacterial properties. Hence, this review aims to foster a comprehensive understanding of the polysaccharides from various Russula spp. and pave the way for their promising and potential future applications in the medical and functional fields.

Research trends of bio-application of major components in lignocellulosic biomass (cellulose, hemicellulose and lignin) in orthopedics fields based on the bibliometric analysis: A review.

Cellulose, hemicellulose, and lignin are the major bio-components in lignocellulosic biomass (BC-LB), which possess excellent biomechanical properties and biocompatibility to satisfy the demands of orthopedic applications. To understand the basis and trends in the development of major bio-components in BC-LB in orthopedics, the bibliometric technology was applied to get unique insights based on the published papers (741) in the Web of Science (WOS) database from January 1st, 2001, to February 14th, 2023. The analysis includes the annual distributions of publications, keywords co-linearity, research hotspots exploration, author collaboration networks, published journals, and clustering of co-cited literature. The results reveal a steady growth in publications focusing on the application of BC-LB in orthopedics, with China and the United States leading in research output. The "International Journal of Biological Macromolecules" was identified as the most cited journal for BC-LB research in orthopedics. The research hotspots encompassed bone tissue engineering, cartilage tissue engineering, and drug delivery systems, indicating the fundamental research and potential development in these areas. This study also highlights the challenges associated with the clinical application of BC-LB in orthopedics and provides valuable insights for future advancements in the field.

Efficient degradation of lignin by chlorine dioxide and preparation of high purity pulp fiber.

High-purity pulp fibers can be obtained by using chlorine dioxide to oxidize lignin. However, organic halogen compounds (AOX) are generated from chlorination side reactions during the lignin oxidation process. In this study, phenolic lignin model compounds with different substituents were selected. The effects of substituent position on the production of free radicals and oxidative ring opening in benzene rings were analyzed. It was found that the structural transformation of lignin and the reaction consumption of ClO2 were significantly changed under high concentration of ClO2. The molar consumption ratio of compound to ClO2 was increased from 1:2 to 1:3. Quinone, an intermediate product that promotes the formation of phenoxy radicals, was found to be stabilized in the reaction. This is attributed to that the benzene ring of lignin is activated through long-range electrostatic interactions. The formation of free radicals and the oxidative ring-opening reaction of benzene rings were facilitated. The efficient oxidation of lignin by ClO2 was fulfilled. Chlorination reactions of lignin were suppressed at elevated oxidation efficiency. The pollution load of wastewater was significantly reduced. AOX generation was reduced by 69.27 %. This provides a new method for efficient oxidative degradation of lignin and preparation of high purity pulp fiber.

Viscoelastic Response in Hydrous Polymers: The Role of Hydrogen Bonds and Microstructure.

Water responsive polymers represent a remarkable group of soft materials, acting as a laboratory for diverse water responsive physical phenomena and cutting-edge biology-electronics interfaces. We report on peculiarly distinctive viscoelastic behaviors of the biobased water responsive polymer cellulose 10-undecenoyl ester, while biobased regenerated cellulose displays stronger hydroplastic behaviors. We discovered a novel hydrous deformation mechanism involving the stretching of hydrogen bonds mediated by hydroxyl groups and water molecules, serving as a crucial factor in accommodating deformations. In parallel, the microstructure of cellulose 10-undecenoyl ester with unique coexisting nanoparticles and a continuous phase of entangled chains is mechanically resilient in the anhydrous state but enhances structural stiffness in the hydrous state. This variation arises from a different hydration level within the hydrous microstructure. Such a fundamental discovery offers valuable insights into the connection between the microscopic physical properties that can be influenced by water and the corresponding viscoelastic responses, extending its applicability to a wide range of hygroscopic materials.

Antitumor Effects of Carrier-Free Functionalized Lignin Materials on Human Hepatocellular Carcinoma (HepG2) Cells.

Lignin, as an abundant aromatic biopolymer in plants, has great potential for medical applications due to its active sites, antioxidant activity, low biotoxicity, and good biocompatibility. In this work, a simple and ecofriendly approach for lignin fractionation and modification was developed to improve the antitumor activity of lignin. The lignin fraction KL-3 obtained by the lignin gradient acid precipitation at pH = 9-13 showed good cytotoxicity. Furthermore, the cell-feeding lignin after additional structural modifications such as demethylation (DKL-3), sulfonation (SL-3), and demethylsulfonation (DSKL-3) could exhibit higher glutathione responsiveness in the tumor microenvironment, resulting in reactive oxygen species accumulation and mitochondrial damage and eventually leading to apoptosis in HepG2 cells with minimal damage to normal cells. The IC50 values for KL-3, SL-3, and DSKL-3 were 0.71, 0.57, and 0.41 mg/mL, respectively, which were superior to those of other biomass extractives or unmodified lignin. Importantly, in vivo experiments conducted in nude mouse models demonstrated good biosafety and effective tumor destruction. This work provides a promising example of constructing carrier-free functionalized lignin antitumor materials with different structures for inhibiting the growth of human hepatocellular carcinoma (HepG2) cells, which is expected to improve cancer therapy outcomes.

Efficient Fast Fractionation of Biomass Using a Diol-Based Deep Eutectic Solvent for Facilitating Enzymatic Hydrolysis and Obtaining High-Quality Lignin.

Current DES pretreatment is often performed under relatively severe conditions with high temperature, long time, and high DES usage. This work studied a short-time diol DES (deep eutectic solvent) pretreatment under mild conditions to fractionate the bamboo, facilitate enzymatic hydrolysis, and obtain high-quality lignin. At an optimized condition of 130 °C for only 10 min, lignin and xylan removal reached 61.34 % and 84.15 %, with residual glucan showing a ~90 % enzymatic hydrolysis yield. Equally important, the dissolved lignin could be readily recovered with 97.51 % yield, exhibiting 96.65 % ß-O-4 preservation. The fractionation and lignin protection mechanisms were unveiled by XRD, FTIR, cellulose-DP, 2D HSQC NMR, 31P NMR and GPC analysis. This study highlighted that short-time fractionation of bamboo can be achieved by a diol-based DES which is an ideal strategy to upgrade the lignocellulose biomass for high enzymatic hydrolysis yields and high-quality lignin stream.

TMBPF-induced neurotoxicity and oxidative stress in zebrafish larvae: impacts on central nervous system development and dopamine neurons.

Bisphenol A (BPA), a common bisphenol molecule, is well known in the environment as an endocrine disruptor. Furthermore, BPs (BPA, BPS, BPF, and BPAF) have been shown in recent years to be neurotoxic to zebrafish. Tetramethyl bisphenol F (TMBPF) has recently been introduced as a substitute for bisphenol A (BPA) in various industries, including plastics and food contact coatings. However, a growing number of studies have demonstrated that the toxicity of some BPA substitutes is similar to or even stronger than BPA, posing potential harm to human health and the environment. In this study, we used zebrafish larvae as a model to investigate the neurodevelopmental effects of TMBPF at different concentrations (0, 0.25, 0.5, 1, 2, 4 and 8 mg/L). Our results showed that exposure to TMBPF at concentrations higher than 4 mg/L for 72 h post-fertilization (hpf) resulted in zebrafish mortality, whereas exposure to 2 mg/L for 144 hpf caused deformities. Furthermore, TMBPF exposure inhibited the development of the central nervous system, motor nerves, and dopamine neurons in zebrafish. Real-time polymerase chain reaction (PCR) analysis revealed that TMBPF exposure significantly down-regulated the expression of oxidative stress-related genes (Cu/Zn-SOD, Mn-SOD, and CAT) and neurodevelopmental genes (mbp, gafp, and syn2a), while up-regulated the expression of dopamine-related genes (th1, th2, and dat). Notably, treatment with the antioxidant N-acetylcysteine (NAC) alleviated TMBPF-induced toxicity. NAC can regulate the expression of genes related to oxidative stress, neurodevelopment and dopamine development, and make the nerve development of zebrafish normal. Overall, our research suggested that TMBPF may disrupt the development of the early central nervous system and dopamine neurons, leading to abnormal motor behavior in zebrafish larvae. These results highlight the potential risks associated with the use of TMBPF in various industries and the importance to evaluate its potential risks to human health and the environment.

Extraction, functionality, and applications of Chlorella pyrenoidosa protein/peptide.

Chlorella pyrenoidosa (C. pyrenoidosa) has been widely used in commercial food and feed production for numerous years. Its high protein content and cost-effectiveness make it an attractive source of novel protein. With a focus on sustainable development and the search for green natural products, current research is dedicated to maximizing the utilization of C. pyrenoidosa protein (CPP) and peptide. Various techniques, such as the use of ionic liquids, freeze-thawing, ultrasonication, enzyme digest, microwaving are employed in the extraction of CPP. The extracted CPP has demonstrated antioxidant, anti-inflammatory, and bacteriostatic properties. It can also stimulate immune regulation, prevent cardiovascular disease, protect red blood cells, and even be used in wastewater treatment. Furthermore, CPP has shown some potential in combating obesity. Additionally, CPP is being explored in three-dimensional (3D) printing applications, particularly for the creation of biological scaffolds. It is also anticipated to play a role in 3D food printing. This review aimed to supply a comprehensive summary of CPP and C. pyrenoidosa peptide extraction methods, their functions, and practical applications in various industries. By doing so, it seeks to underpin subsequent research efforts, highlight current research limitations, and identify future research directions in this field.

Bioactivities of the Popular Edible Brown Seaweed Sargassum fusiforme: A Review.

Sargassum fusiforme has a wide range of active constituents (such as polysaccharides, sterols, polyphenols, terpenes, amino acids, trace elements, etc.) and is an economically important brown algae with a long history. In recent years, S. fusiforme has been intensively studied and has attracted wide attention in the fields of agriculture, environment, medicine, and functional food. In this review, we reviewed the current research status of S. fusiforme at home and abroad over the past decade by searching Web of science, Google Scholar, and other databases, and structurally analyzed the active components of S. fusiforme, and on this basis, we focused on summarizing the cutting-edge research and scientific issues on the role of various active substances in S. fusiforme in exerting antioxidant, anti-inflammatory, antitumor, antidiabetic, immunomodulatory, antiviral antibacterial, and anticoagulant effects. The mechanisms by which different substances exert active effects were further summarized by exploring different experimental models and are shown visually. It provides a reference to promote further development and comprehensive utilization of S. fusiforme resources.

Recent Advances of Lignin Functionalization for High-Performance and Advanced Functional Rubber Composites.

The biomass lignin is the only large-volume renewable feedstock that is composed of aromatics but has been largely underutilized and is sought for valorization as a value-added material. Recent research has highlighted lignin as a promising alternative to traditional petrol-based reinforcements and functional additives for rubber composites. This review summarized the recent advances in the functionalization of lignin for a variety of rubber composites, as well as the compounding techniques for effectively dispersing lignin within the rubber matrix. Significant progress has been achieved in the development of high-performance and advanced functional rubber/lignin composites through carefully designing the structure of lignin-based additives and the optimization of interfacial morphologies. This Review discussed the effect of lignin on composite properties, including mechanical reinforcement, dynamic properties, antiaging performance, and oil resistance, and also the advanced stimuli-responsive performance in detail. A critical analysis for the future development of rubber/lignin composites is presented as concluding remarks.

Evaluating the In Vitro and In Vivo Prebiotic Effects of Different Xylo-Oligosaccharides Obtained from Bamboo Shoots by Hydrothermal Pretreatment Combined with Endo-Xylanase Hydrolysis.

Xylo-oligosaccharides (XOS) enriched with high fractions of X2-X3 are regarded as an effective prebiotic for regulating the intestinal microflora. In this study, the original XOS solution was obtained from bamboo shoots through hydrothermal pretreatment under optimized conditions. Subsequently, enzymatic hydrolysis with endo-xylanase was performed on the original XOS solution to enhance the abundance of the X2-X3 fractions. The results demonstrated that hydrothermal pretreatment yielded 21.24% of XOS in the hydrolysate solution, and subsequent enzymatic hydrolysis significantly increased the proportion of the X2-X3 fractions from 38.87% to 68.21%. Moreover, the XOS solutions with higher amounts of X2-X3 fractions exhibited superior performance in promoting the growth of probiotics such as Bifidobacterium adolescentis and Lactobacillus acidophilus in vitro, leading to increased production of short-chain fatty acids. In the in vivo colitis mouse model, XOS solutions with higher contents of X2-X3 fractions demonstrated enhanced efficacy against intestinal inflammation. Compared with the colitis mice (model group), the XOS solution with higher X2-X3 fractions (S1 group) could significantly increase the number of Streptomyces in the intestinal microflora, while the original XOS solution (S2 group) could significantly increase the number of Bacteroides in the intestinal microflora of colitis mice. In addition, the abundances of Alcaligenes and Pasteurella in the intestinal microflora of the S1 and S2 groups were much lower than in the model group. This effect was attributed to the ability of these XOS solutions to enhance species diversity, reversing the imbalance and disorder within the intestinal microflora. Overall, this work highlights the outstanding potential of XOS enriched with high contents of X2-X3 fractions as a regulator of the intestinal microbiota and as an anti-colitis agent.

Quinoa protein Pickering emulsion improves the freeze-thaw stability of myofibrillar protein gel: Maintaining protein composition, structure, conformation and digestibility and slowing down protein oxidation.

In this work, the effects of quinoa protein Pickering emulsion (QPPE) on protein oxidation, structure and gastrointestinal digestion property of myofibrillar protein gels (MPGs) after freeze-thaw (F-T) cycles are revealed. SDS-PAGE results indicated that 5.0 %-10.0 % QPPE addition slowed down the protein degradation. Meanwhile, 5.0 %-7.5 % QPPE maintained the stability of the protein secondary and tertiary structure of MPGs after F-T cycles. The sulfhydryl group, disulfide bond and dityrosine content increased with QPPE supplementation. The conformations of disulfide bond changed from g-g-t and t-g-t to g-g-g after F-T cycles, and 5.0 %-7.5 % QPPE stabilized the changes of t-g-t conformation. Furthermore, the increase of dityrosine content after F-T cycles was significantly reduced with 7.5 % QPPE addition, indicating its effect to slow down protein oxidation of MPGs. In addition, MPGs with 5.0 % and 7.5 % QPPE showed noticeably higher zeta potential values than other groups, indicating the enhanced electrostatic repulsion and weakened aggregation caused by F-T damage. This work showed that 7.5 % QPPE improved the F-T stability of MPGs and reduced the protein denaturation and oxidation caused by F-T treatments, exerting no side effect on the digestion property of MPGs. QPPE can be used as a green and effective antifreeze in meat industry.

Sustainable Porous Scaffolds with Retained Lignin as An Effective Light-absorbing Material for Efficient Photothermal Energy Conversion.

Organic phase change materials (PCMs) are promising to utilize thermal energy from solar radiation for photothermal energy conversion. However, the issues of poor photo absorption and liquid leakage greatly restrict their practical application. Herein, a sustainable porous scaffold comprising periodate oxidized wood (POW) as the supporting material and in situ retains lignin as the light-absorber dopant are demonstrated. The π-π stacking ability of lignin molecules endows the retained lignin with efficient photonic energy harvesting characteristics for fast thermal conductivity to reach a higher maximal energy storage volume. The inherently porous structure of the POW scaffold enables excellent shape-stability, which bypasses the liquid leakage problem. The resulting POW/PCM composites exhibit superior comprehensive performance, including enhanced light absorption capacity, high photothermal conversion efficiency (≈86.7%), and high latent heat of 151 J g-1 . Furthermore, the POW/PCM composites also possess the ability to maintain a relatively constant indoor temperature when fixed atop the model house roof, showing great potential for their practical applications in the thermal regulation of intelligent buildings. This work not only paves a new way to obtain sustainable and effective porous scaffolds for sufficient photothermal energy conversion but also provides more possibilities for their practical application in the future.

Selective separation of hemicellulose from poplar by hydrothermal pretreatment with ferric chloride and pH buffer.

As an environmentally friendly lignocellulosic biomass separation technology, hydrothermal pretreatment (HP) has a strong application prospect. However, the low separation efficiency is a main factor limiting its application. In this study, the poplar components were separated using HP with ferric chloride and pH buffer (HFB). The optimal conditions were ferric chloride concentration of 0.10 M, reaction temperature of 150 °C, reaction time of 15 min and pH 1.9. The separation of hemicellulose was increased 34.03 % to 77.02 %. The pH buffering resulted in the highest cellulose and lignin retention yields compared to ferric chloride pretreatment (FC). The high efficiency separation of hemicellulose via HFB pretreatment inhibited the degradation of xylose. The hydrolysate was effectively reused for five times. The fiber crystallinity index reached 60.05 %, and the highest C/O ratio was obtained. The results provide theoretical support for improving the efficiency of HP and promoting its application.

Employing deep eutectic solvent synthesized by cetyltrimethylammonium bromide and ethylene glycol to advance enzymatic hydrolysis efficiency of rape straw.

An efficient deep eutectic solvent (DES) was synthesized by cetyltrimethylammonium bromide (CTAB) and ethylene glycol (EG) and employed to treat rape straw (RS) for advancing enzymatic saccharification in this work. By optimizing the pretreatment parameters, the results displayed that the novel DES was strongly selective towards removing lignin and xylan while preserving cellulose. Under optimum conditions with 1:6 of CTAB: EG in DES, 180 °C and 80 min, the enzymatic hydrolysis efficiency of RS was enhanced by 46.0% due to the 62.2% of delignification and 53.2% of xylan removal during CTAB: EG pretreatment. In terms of the recalcitrant structure of RS, DES pretreatment caused the increment of cellulosic accessibility, reduction of hydrophobicity and surface area of lignin, and migration of cellulosic crystalline structure, which was associated with its enzymatic hydrolysis efficiency. Overall, this study presented an emerging method for the effective fractionation and valorization of lignocellulosic biomass within biorefinery technology.