Quantitative assessment whole-rock iron content in magnetite protolith based on terahertz time-domain spectroscopy: publisher's note.

This publisher's note serves to correct errors in Appl. Opt.63, 2528 (2024)APOPAI0003-693510.1364/AO.517400.

Effect of crystal-water on the optical and dielectric characteristics of calcium sulfate in the THz band.

The effect of crystal-water contents on the optical properties and dielectric characteristics of calcium sulfate in the THz band is investigated. The complex dielectric constant and conductivity are analyzed using the Drude-Smith model. The refractive index and absorption coefficient are linearly increased with the content of crystal-water, and the corresponding linear fitting lines of R2 over 0.97 are obtained. The dielectric properties of calcium sulfate are significantly affected by the crystal-water content. These results indicate that a new method to quantitative measurement of the crystal-water content in hydrous minerals is provided.

Quantitative assessment whole-rock iron content in magnetite protolith based on terahertz time-domain spectroscopy.

Terahertz time-domain spectroscopy was first used to establish a correlation with the whole-rock iron (TFe) content in different depths of the Bayan Obo protolith. Compared with element content obtained by the traditional method of X-ray fluorescence spectroscopy (XRF), a similar tendency of the absorption coefficient and refractive index is presented. Furthermore, three machine learning algorithms, namely, partial least squares regression (PLSR), random forest (RF), and multi-layer perceptron (MLP), were used to develop a quantitative analytical model for TFe content of the protolith minerals. Among the three algorithms, MLP has the highest detection accuracy, with a model coefficient of determination R 2 reaching up to 0.945. These findings demonstrate that terahertz time-domain spectroscopy can be used to rapidly quantify the TFe elemental content of protolith, providing a method of detecting the content of mineral components.

Available heavy metals concentrations in agricultural soils: Relationship with soil properties and total heavy metals concentrations in different industries.

Heavy metal (HM) pollution in agricultural soils has arisen sharply in recent years. However, the impact of main factors on available HMs concentrations in agricultural soils of the three main industries (smelting, chemical and mining industry) is unclear. Herein, soil properties (pH, cation exchange capacity (CEC) and texture (sand, slit, clay)), total and available concentrations were concluded based on the results of 165 research papers from 2000 to 2023 in Web of Science database. In the three industries, the correlation and redundancy analysis were used to study the correlation between main factors and available concentrations, and quantitatively analyzed the contribution of each factor to available concentrations with gradient boosting decision tree model. The results showed that different factors had varying degrees of impact on available metals in the three main industries, and the importance of same factors varied in each industry, as for soil pH, it was most important for available Pb and Zn in the chemical industry, but the total concentrations were most important in the smelting and mining industry. There was no significant correlation between total and available concentrations. Soil properties involved in this paper (especially soil pH) were negatively correlated with available concentrations. This study provides effective guidance for the formulation of soil pollution control and risk assessment standards based on industry classification in the three major industrial impact areas.

Terahertz Time-Domain Spectroscopic Characteristics of Typical Metallic Minerals.

Accurate identification and understanding of various metallic minerals are crucial for deciphering geological formations, structures, and ages. Giving their pivotal role as essential natural resources, a microscopic exploration of metallic minerals becomes imperative. Traditional analytical methods, while helpful, exhibit certain limitations. However, terahertz time-domain spectroscopy, distinguished by its high signal-to-noise ratio, expansive frequency band, and low incident wave energy, is a promising complement to conventional techniques in characterizing metallic minerals. This study employs terahertz time-domain spectroscopy to examine samples of Stibnite, Sphalerite, Galena, and Pyrite originating from diverse geological conditions. The vibrations of molecules within these metallic minerals induce discernible changes in the terahertz spectra. Our findings untiate the extensive potential of terahertz time-domain spectroscopy in the characterization of metallic minerals, affirming its considerable practical value in mineral resource exploration.

Characterization of the remediation of chromium ion contamination with bentonite by terahertz time-domain spectroscopy.

Heavy metal pollution of agricultural and urban soils limits economic progress in the rapidly developing society. Terahertz technology is applied to detect heavy metal pollutants under existence of multiple pathways of their dissemination. In this study, terahertz time-domain spectroscopy (THz-TDS) is employed as an advanced probing technique in combination with traditional detecting methods to measure the adsorption ability of trivalent chromium ions on bentonite. The concentration of chromium ions and the weight of bentonite are known to influence on the adsorption capacity of the latter. It is tested here by both qualitative and quantitative measurements of two mentioned parameters. The adsorption process of chromium ions by bentonite is monitored using THz-TDS. The adsorptions signal from samples at 0.5 THz gradually increases with the increase of bentonite weight or chromium ion concentration. It would appear to indicate that terahertz could be used for quantitative detection of metal ions. Secondly, the ratios of results obtained by inductively coupled plasma mass spectrometry (ICP-MS) and the THz-TDS ones are stabilized at 0.105  ±  0.014 as the bentonite weight or chromium ion concentration increase. Such finding confirms that terahertz technology can be used for the quantitative detection of metal ions. Using the relationship between the ICP-MS test results and the THz-TDS ones, the amplitude value of bentonite is obtained to be 13.925 at the concentration of chromium ions of 0.05 mol/L, the mass of bentonite sample involved in adsorption of 1.5 g, and the detection frequency in THz-TDS measurements of 0.5 THz. The adsorption coefficient of bentonite is calculated to be 1.44%. Increase of the chromium ion concentration to 0.2 mol/L, and the mass of bentonite involved in adsorption to 3 g leads to the increase of the amplitude corresponding to adsorbed chromium ions to about 19.463, and the adsorption coefficient to about 2.1%. Obtained results demonstrate that terahertz technology is promising to meet the ever-increasing requirements in mineral analyses for rapid detection of chemical contaminants and measurement of the adsorption efficiencies of materials.

Limitations of the transmitted photonic spin Hall effect through layered structure.

In this paper, we show theoretically that the spin-dependent transverse shift of the transmitted photonic spin Hall effect (SHE) through layered structure cannot exceed half of the incident beam waist. Exact conditions for obtaining the upper limit of the transmitted SHE are clarified in detail. In addition, different from the popular view in many investigations, we find that there is no positive correlation between the spin-dependent transverse displacement and the ratio between the Fresnel transmission coefficients (tp, ts). In contrast, the optimal transmission ratio is determined by the incident angle and the beam waist. Moreover, two conventional transmission structures are selected and studied in detail. The characteristics of the transverse displacements obtained are in very good agreement with our theoretical conclusions. These findings provide a deeper insight into the photonic spin Hall phenomena and offer a guide for future related research.

Tunable bilateral unidirectional transmissions in a grating and photonic crystal hybrid structure.

In this work, bilateral unidirectional transmissions (UDTs) with opposite transmission directions in one hybrid structure are realized using two different resonant mechanisms. The hybrid structure consists of a dielectric grating and a one-dimensional photonic crystal (PC) with a defect sandwiched at its center. One resonant mode is the defect mode of the PC enabling one UDT for one transmission direction. The other resonant mode is the grating guided mode resonance which introduces UDT for the opposite direction. Numerical calculations demonstrate that for each UDT, its transmittance difference, transmittance contrast ratio, and isolation degree can reach 90%, 100%, and 20%, respectively. In addition, the operation wavelength of each UDT as well as the wavelength interval between the two UDTs with opposite transmission directions can be tuned easily by adjusting structural parameters. This novel bilateral UDT creates potential for applications in both free space optics and optical circuits.

Insights into the water status in hydrous minerals using terahertz time-domain spectroscopy.

The determinations of water status incorporated in hydrous minerals are of considerable significances in geoscience fields. Coincidentally, the aqueous sensitivity of terahertz radiation has motivated numerous explorations in several cross-domain applications. Terahertz time-domain spectroscopy is employed as a major probing technique coupling of traditional detecting methods to uncover the mask of water status in copper sulfate pentahydrate as well as mineral quartz in this article. Based on the quantitative identification of water status in copper sulfate pentahydrate, the water incorporated in mineral quartz is verified qualitatively. Notable differences of optical constants originating from the water content are obtained for copper sulfate pentahydrate and mineral quartz. These present works indicate that terahertz technology can be considered as a promising method to satisfy the ever-increasing requirements in hydrous mineral analyses.

Methods for registering and calibrating in vivo terahertz images of cutaneous burn wounds.

A method to register THz and visible images of cutaneous burn wounds and to calibrate THz image data is presented. Images of partial and full thickness burn wounds in 9 rats were collected over 435 mins. = 7.25 hours following burn induction. A two-step process was developed to reference the unknown structure of THz imaging contrast to the known structure and the features present in visible images of the injury. This process enabled the demarcation of a wound center for each THz image, independent of THz contrast. Threshold based segmentation enabled the automated identification of air (0% reflectivity), brass (100% reflectivity), and abdomen regions within the registered THz images. Pixel populations, defined by the segmentations, informed unsupervised image calibration and contrast warping for display. The registered images revealed that the largest variation in THz tissue reflectivity occurred superior to the contact region at ~0.13%/min. Conversely the contact region showed demonstrated an ~6.5-fold decrease at ~0.02%/min. Exploration of occlusion effects suggests that window contact may affect the measured edematous response.

Synthetic aperture in terahertz in-line digital holography for resolution enhancement.

Terahertz digital holography is a combination of terahertz technology and digital holography. In digital holography, the imaging resolution is the key parameter in determining the detailed quality of a reconstructed wavefront. In this paper, the synthetic aperture method is used in terahertz digital holography and the in-line arrangement is built to perform the detection. The resolved capability of previous terahertz digital holographic systems restricts this technique to meet the requirement of practical detection. In contrast, the experimental resolved power of the present method can reach 125 µm, which is the best resolution of terahertz digital holography to date. Furthermore, the basic detection of a biological specimen is conducted to show the practical application. In all, the results of the proposed method demonstrate the enhancement of experimental imaging resolution and that the amplitude and phase distributions of the fine structure of samples can be reconstructed by using terahertz digital holography.

Terahertz in-line digital holography of human hepatocellular carcinoma tissue.

Terahertz waves provide a better contrast in imaging soft biomedical tissues than X-rays, and unlike X-rays, they cause no ionisation damage, making them a good option for biomedical imaging. Terahertz absorption imaging has conventionally been used for cancer diagnosis. However, the absorption properties of a cancerous sample are influenced by two opposing factors: an increase in absorption due to a higher degree of hydration and a decrease in absorption due to structural changes. It is therefore difficult to diagnose cancer from an absorption image. Phase imaging can thus be critical for diagnostics. We demonstrate imaging of the absorption and phase-shift distributions of 3.2 mm × 2.3 mm × 30-µm-thick human hepatocellular carcinoma tissue by continuous-wave terahertz digital in-line holography. The acquisition time of a few seconds for a single in-line hologram is much shorter than that of other terahertz diagnostic techniques, and future detectors will allow acquisition of meaningful holograms without sample dehydration. The resolution of the reconstructions was enhanced by sub-pixel shifting and extrapolation. Another advantage of this technique is its relaxed minimal sample size limitation. The fibrosis indicated in the phase distribution demonstrates the potential of terahertz holographic imaging to obtain a more objective, early diagnosis of cancer.

Terahertz in-line digital holography of dragonfly hindwing: amplitude and phase reconstruction at enhanced resolution by extrapolation.

We report here on terahertz (THz) digital holography on a biological specimen. A continuous-wave (CW) THz in-line holographic setup was built based on a 2.52 THz CO(2) pumped THz laser and a pyroelectric array detector. We introduced novel statistical method of obtaining true intensity values for the pyroelectric array detector's pixels. Absorption and phase-shifting images of a dragonfly's hindwing were reconstructed simultaneously from single in-line hologram. Furthermore, we applied phase retrieval routines to eliminate twin image and enhanced the resolution of the reconstructions by hologram extrapolation beyond the detector area. The finest observed features are 35 µm width cross veins.