RESUMEN
The optimum femtosecond laser direct writing of Bragg gratings on silica optical waveguides has been investigated. The silica waveguide has a 6.5 × 6.5 µm2 cross-sectional profile with a 20-µm-thick silicon dioxide cladding layer. Compared with conventional grating inscribed on fiber platforms, the silica planar waveguide circuit can realize a stable performance as well as a high-efficiency coupling with the fiber. A thin waveguide cladding layer also facilitates laser focusing with an improved spherical aberration. Different from the circular fiber core matching with the Gaussian beam profile, a 1030-nm, 400-fs, and 190-nJ laser is optimized to focus on the top surface of the square silica waveguide, and the 3rd-order Bragg gratings are inscribed successfully. A 1.5-mm long uniform Bragg gratings structure with a reflectivity of 90% at a 1548.36-nm wavelength can be obtained. Cascaded Bragg gratings with different periods are also inscribed in the planar waveguide. Different reflection wavelengths can be realized, which shows great potential for wavelength multiplexing-related applications such as optical communications or sensing.
RESUMEN
Municipal solid waste (MSW) source-classified collection represents a change in MSW management in China and other developing countries. Comparative experiments were performed to evaluate the effect of a newly established MSW source-classified collection system on the emission of PCDDs/Fs (polychlorinated dibenzo-p-dioxins and dibenzofurans) and heavy metals (HMs) from a full-scale incinerator in China. As a result of presorting and dewatering, the chlorine level, heavy metal and water content were lower, but heat value was higher in the source-classified MSW (classified MSW) as compared with the conventionally mixed collected MSW (mixed MSW). The generation of PCDDs/Fs in flue gas from the classified MSW incineration was 9.28 ng I-TEQ/Nm(3), only 69.4% of that from the mixed MSW incineration, and the final emission of PCDDs/Fs was only 0.12 ng I-TEQ/Nm(3), although activated carbon injection was reduced by 20%. The level of PCDDs/Fs in fly ash from the bag filter was 0.27 ng I-TEQ/g. These results indicated that the source-classified collection with pretreatment could improve the characteristics of MSW for incineration, and significantly decrease formation of PCDDs/Fs in MSW incineration. Furthermore, distributions of HMs such as Cd, Pb, Cu, Zn, Cr, As, Ni, Hg in bottom ash and fly ash were investigated to assess the need for treatment of residual ash.