RESUMEN
Addressing critical challenges in enhancing the oxidative stability and proton conductivity of high-temperature proton exchange membranes (HT-PEMs) is pivotal for their commercial viability. This study uncovers the significant capacity of multiwalled carbon nanotubes (MWNTs) to absorb a substantial amount of phosphoric acid (PA). The investigation focuses on incorporating long-range ordered hollow MWNTs into self-cross-linked fluorenone-containing polybenzimidazole (FPBI) membranes. The absorbed PA within MWNTs and FPBI forms dense PA networks within the membrane, effectively enhancing the proton conductivity. Moreover, the exceptional inertness of MWNTs plays a vital role in reinforcing the oxidation resistance of the composite membranes. The proton conductivity of the 1.5% CNT-FPBI membrane is measured at 0.0817 S cm-1 at 160 °C. Under anhydrous conditions at the same temperature, the power density of the 1.5% CNT-FPBI membrane reaches 831.3 mW cm-2. Notably, the power density remains stable even after 200 h of oxidation testing and 250 h of operational stability in a single cell. The achieved power density and long-term stability of the 1.5% CNT-FPBI membrane surpass the recently reported results. This study introduces a straightforward approach for the systematic design of high-performance and robust composite HT-PEMs for fuel cells.
RESUMEN
Co-based catalysts are promising candidates to replace Ir/Ru-based oxides for oxygen evolution reaction (OER) catalysis in an acidic environment. However, both the reaction mechanism and the active species under acidic conditions remain unclear. In this study, by combining surface-sensitive soft X-ray absorption spectroscopy characterization with electrochemical analysis, we discover that the acidic OER activity of Co-based catalysts are determined by their surface oxidation/spin state. Surfaces composed of only high-spin CoII are found to be not active due to their unfavorable water dissociation to form CoIII-OH species. By contrast, the presence of low-spin CoIII is essential, as it promotes surface reconstruction of Co oxides and, hence, OER catalysis. The correlation between OER activity and Co oxidation/spin state signifies a breakthrough in defining the structure-activity relationship of Co-based catalysts for acidic OER, though, interestingly, such a relationship does not hold in alkaline and neutral environments. These findings not only help to design efficient acidic OER catalysts, but also deepen the understanding of the reaction mechanism.
RESUMEN
Co-based perovskite oxides are intensively studied as promising catalysts for electrochemical water splitting in an alkaline environment. However, the increasing Co demand by the battery industry is pushing the search for Co-free alternatives. Here we report a systematic study of the Co-free layered perovskite family RBaCuFeO5+δ (R = 4f lanthanide), where we uncover the existence of clear correlations between electrochemical properties and several physicochemical descriptors. Using a combination of advanced neutron and X-ray synchrotron techniques with ab initio DFT calculations we demonstrate and rationalize the positive impact of a large R ionic radius in their oxygen evolution reaction (OER) activity. We also reveal that, in these materials, Fe3+ is the transition metal cation the most prone to donate electrons. We also show that similar R3+/Ba2+ ionic radii favor the incorporation and mobility of oxygen in the layered perovskite structure and increase the number of available O diffusion paths, which have an additional, positive impact on both, the electric conductivity and the OER process. An unexpected result is the observation of a clear surface reconstruction exclusively in oxygen-rich samples (δ > 0), a fact that could be related to their superior OER activity. The encouraging intrinsic OER values obtained for the most active electrocatalyst (LaBaCuFeO5.49), together with the possibility of industrially producing this material in nanocrystalline form should inspire the design of other Co-free oxide catalysts with optimal properties for electrochemical water splitting.
RESUMEN
BACKGROUND: Nucleotide analogs treatment can reverse liver fibrosis in chronic hepatitis B (CHB). However, it has limited effect on fibrosis resolution in patients with CHB, particularly in preventing progression to hepatocellular carcinoma (HCC). Ruangan granule (RG), a Chinese herbal formula, has proven to produce a therapeutic effect against liver fibrosis in animal experiment. Thus, we aimed to evaluate the effect of our Chinese herbal formula (RG) combined with entecavir (ETV) to reverse advanced liver fibrosis/early cirrhosis from CHB. METHODS: A total of 240 CHB patients with histologically confirmed advanced liver fibrosis/early cirrhosis from 12 centers were randomly and blindly allocated to consume either ETV (0.5 mg/day) plus RG (2 times/day) or control (ETV) for 48 weeks (wk) treatment. Changes in histopathology, serology and imageology were observed. Liver fibrosis reversion, defined as a reduction in the Knodell HAI score by ≥ 2 points and Ishak score by ≥ 1 grade, was assessed. RESULTS: The rate of fibrosis regression and inflammation remission after 48 wk of treatment in histopathology was significantly higher in the ETV + RG group (38.73% vs. 23.94%, P = 0.031). The ultrasonic semiquantitative scores decreased by ≥ 2 points and were 41 (28.87%) and 15 (21.13%) in the ETV+RG and ETV groups, respectively (P = 0.026). The ETV+RG group had a significantly lower Fibrosis-4 score (FIB-4) index (P = 0.028). There was a significant difference between the ETV+RG and ETV groups in the liver function normalization rate (P < 0.01). Moreover, ETV plus RG combination treatment further reduced the risk of HCC in median 55-month follow-up (P < 0.01). CONCLUSIONS: This study illustrates that the Chinese herbal formula RG with ETV can improve advanced liver fibrosis/early cirrhosis regression in patients with CHB, further reducing the risk of HCC.
Asunto(s)
Carcinoma Hepatocelular , Hepatitis B Crónica , Neoplasias Hepáticas , Animales , Virus de la Hepatitis B , Hepatitis B Crónica/complicaciones , Hepatitis B Crónica/tratamiento farmacológico , Antivirales/uso terapéutico , Antivirales/farmacología , Carcinoma Hepatocelular/tratamiento farmacológico , Resultado del Tratamiento , Neoplasias Hepáticas/tratamiento farmacológico , Cirrosis Hepática/tratamiento farmacológico , Cirrosis Hepática/patologíaRESUMEN
Polyphyllin I (PPI), also called Chong Lou saponin I, is a steroidal saponin isolated from the rhizome of Paris polyphylla. PPI has been demonstrated to have strong anticancer activity. However, its effect on the stemness of liver cancer stem cells (LCSCs) is not completely understood. Herein, we aimed to investigate the effect of PPI on the stem cell-like features of LCSCs and hepatocellular carcinoma (HCC). LCSCs were enriched in a serum-free medium and treated with PPI, sorafenib (Sora), or PPI and Sora. Several endpoints, including spheroid formation and differentiation, cell proliferation, surface markers of LCSCs, PPI binding targets, and stemness-associated protein expression, were evaluated. Immunofluorescence staining, quantitative real-time polymerase chain reaction, siRNA transfection, and coimmunoprecipitation ubiquitination assays were conducted for in-depth mechanistic studies. Evaluation of in vivo antitumor efficacy demonstrated that PPI effectively inhibited the proliferation of liver cancer cells and the self-renewal and differentiation of LCSCs. Flow cytometry indicated that PPI suppressed the expression of the stem cell surface markers EpCAM and CD13. Molecular docking showed a high affinity between PPI and proteins of the Wnt/ß-catenin signaling pathway, including AKT, GSK-3ß, and ß-catenin, with the binding energies of -5.51, -5.32, and -5.40 kcal/mol, respectively, which suggested that PPI might regulate the Wnt/ß-catenin signaling pathway to affect the stem cell-like properties of HCC. Further ex vivo experiments implied that PPI activated the AKT/GSK-3ß-mediated ubiquitin proteasomal degradation of ß-catenin and subsequently attenuated the prooncogenic effect of LCSCs. Finally, the anticancer property of PPI was confirmed in vivo. It was found that PPI inhibited the tumor growth in an HCC cell line xenograft model. Taken together, molecular docking analysis and experimental data highlighted the novel function of PPI in suppressing the stem cell-like characteristics of LCSCs via the AKT/GSK-3ß/ß-catenin signaling pathway.
Asunto(s)
Carcinoma Hepatocelular , Neoplasias Hepáticas , Saponinas , Humanos , Carcinoma Hepatocelular/metabolismo , beta Catenina/metabolismo , Glucógeno Sintasa Quinasa 3 beta/metabolismo , Proteínas Proto-Oncogénicas c-akt/metabolismo , Neoplasias Hepáticas/metabolismo , Simulación del Acoplamiento Molecular , Línea Celular Tumoral , Vía de Señalización Wnt , Células Madre Neoplásicas/metabolismo , Proliferación Celular , Saponinas/farmacología , Saponinas/uso terapéuticoRESUMEN
Using an admixed organic corrosion inhibitor is one of the most efficient strategies to enhance the corrosion resistance and durability of reinforced concrete. However, traditional admixed organic corrosion inhibitors only increase the corrosion resistance of the embedded reinforcing steel, and the optimization effect on the pore structure and the impermeability of concrete is very limited. In this study, in order to evaluate the corrosion-inhibition effect of a novel hydrophobic functional organic corrosion inhibitor, the adsorption behavior of a hydrophobic functional organic corrosion inhibitor and its related effect on the electrochemical behavior of the reinforcing steel was investigated. In addition, this paper further discusses the effect of a hydrophobic functional organic corrosion inhibitor on pore structure and hydrophobic properties, as well as the impermeability of concrete. The results indicated that the hydrophobic functional organic corrosion inhibitor was effectively adsorbed on the surface of the steel bar, and the higher adsorption content was relevant to the higher inhibitor dosage. On one hand, the hydrophobic functional organic corrosion inhibitor exhibited both a pore-blocking effect and a hydrophobic effect on concrete, leading to a refined pore structure and reduced capillary water absorption amount; on the other hand, the hydrophobic functional organic corrosion inhibitor exhibited an excellent corrosion-inhibition effect on the reinforcement embedded in the concrete, presenting an inhibition efficiency higher than 90% with a concentration of 4 wt.%.
RESUMEN
Developing earth-abundant and highly effective electrocatalysts for hydrogen evolution reaction (HER) is a prerequisite for the upcoming hydrogen energy society. Two-dimensional (2D) high-entropy metal phosphorus trichalcogenides (MPCh3) have the advantages of both near-continuous adsorption energies of high-entropy alloys (HEAs) and large specific surface area of 2D materials, which are excellent catalytic platforms. As a typical 2D high-entropy catalyst, Co0.6(VMnNiZn)0.4PS3 nanosheets with high-concentration active sites are successfully demonstrated to show enhanced HER performance: an overpotential of 65.9 mV at a current density of 10 mA cm-2 and a Tafel slope of 65.5 mV dec-1. Decent spectroscopy characterizations are combined with density function theory analyses to show the scenario for the enhancement mechanism by a high-entropy strategy. The optimized S sites on the edge and P sites on the basal plane provide more active sites for hydrogen adsorption, and the introduced Mn sites boost water dissociation during the Volmer step. Two-dimensional high-entropy MPCh3 provides an avenue for the combination of HEAs and 2D materials to enhance the HER performance, which also provides an alternative materials platform to explore and design superior catalysts for various electrochemical systems.
RESUMEN
The functional group is the main body in modifying the perovskite film, and different functional groups lead to different modification effects. Here, several conjugated triazine-based small molecules such as melamine (Cy-NH2), cyanuric acid (Cy-OH), cyanuric fluoride (Cy-F), cyanuric chloride (Cy-Cl), and thiocyanuric acid (Cy-SH) are used to modify perovskite films by mixing in antisolvent. The crystallizations of perovskites are optimized by these molecules, and the perovskite films with low trap density are obtained by forming Lewis adducts with these molecules (Pb2+ and electron-donating groups including -NH2, CâN-, and CâO; I- and electron-withdrawing groups including F, Cl, N-H, and O-H). Especially for the Cy-F and Cy-Cl, the heterojunction structure is formed in the perovskite layer by p-type modification, which is conducive to charge transfer and collection in PSCs. Compared with that of control devices, the performance of devices with trap passivation and heterojunction engineering is obviously improved from 18.49 to 20.71% for MAPbI3 and 19.27 to 21.11% for FA0.85Cs0.15PbI3. Notably, the excellent moisture (retaining 67%, RH: 50% for 20 days) and thermal (retaining 64%, 85 °C for 72 h) stability of PSCs are obtained by a kind of second modification (Cy-F/Cy-SH)âspin-coating a few Cy-SH on the Cy-F-modified perovskite film surface. It also reduces Pb pollution because Cy-SH is a highly potent chelating agent. Therefore, this work also provides an effective method to obtain high-performance, stable, and low-lead pollution PSCs, combining trap passivation, heterojunction engineering, and surface treatment.
RESUMEN
Iridium-based perovskites show promising catalytic activity for oxygen evolution reaction (OER) in acid media, but the iridium mass activity remains low and the active-layer structures have not been identified. Here, we report highly active 1 nm IrOx particles anchored on 9R-BaIrO3 (IrOx/9R-BaIrO3) that are directly synthesized by solution calcination followed by strong acid treatment for the first time. The developed IrOx/9R-BaIrO3 catalyst delivers a high iridium mass activity (168 A gIr-1), about 16 times higher than that of the benchmark acidic OER electrocatalyst IrO2 (10 A gIr-1), and only requires a low overpotential of 230 mV to reach a catalytic current density of 10 mA cm-2geo. Careful scanning transmission electron microscopy, synchrotron radiation-based X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy analyses reveal that, during the electrocatalytic process, the initial 1 nm IrOx nanoparticles/9R-BaIrO3 evolve into amorphous Ir4+OxHy/IrO6 octahedrons and then to amorphous Ir5+Ox/IrO6 octahedrons on the surface. Such high relative content of amorphous Ir5+Ox species derived from trimers of face-sharing IrO6 octahedrons in 9R-BaIrO3 and the enhanced metallic conductivity of the Ir5+Ox/9R-BaIrO3 catalyst are responsible for the excellent acidic OER activity. Our results provide new insights into the surface active-layer structure evolution in perovskite electrocatalysts and demonstrate new approaches for engineering highly active acidic OER nanocatalysts.
RESUMEN
Acidic oxygen evolution reaction is crucial for practical proton exchange membrane water splitting electrolysers, which have been hindered by the high catalytic overpotential and high loading of noble metal catalysts. Here we present a torsion-strained Ta0.1Tm0.1Ir0.8O2-δ nanocatalyst with numerous grain boundaries that exhibit a low overpotential of 198 mV at 10 mA cm-2 towards oxygen evolution reaction in 0.5 M H2SO4. Microstructural analyses, X-ray absorption spectroscopy and theoretical calculations reveal that the synergistic effects between grain boundaries that result in torsion-strained Ir-O bonds and the doping induced ligand effect collectively tune the adsorption energy of oxygen intermediates, thus enhancing the catalytic activity. A proton exchange membrane electrolyser using a Ta0.1Tm0.1Ir0.8O2-δ nanocatalyst with a low mass loading of 0.2 mg cm-2 can operate stably at 1.5 A cm-2 for 500 hours with an estimated cost of US$1 per kilogram of H2, which is much lower than the target (US$2 per kg of H2) set by the US Department of Energy.
RESUMEN
The smart release of healing agents is a key factor determining the inhibition efficiency of microcapsules-based corrosion inhibitors for reinforced concrete. In this study, the release behavior of benzotriazole (BTA) in microcapsule-based inhibitors was investigated in mortar sample to clarify the influence of different hydration products on the release process. The results indicated that under high pH environment (pH > 12.4), only about 5% reserved BTA was released from the mortar sample. pH drop resulted in the increased release of BTA from mortar sample. Most BTA in the microcapsule-based inhibitors was released from mortar sample in low pH environment, which was closely related to morphology/composition alterations of hydration products caused by pH drop of the environment. The smart release of BTA dramatically delayed corrosion initiation of reinforced mortar and halted corrosion product accumulation on the steel surface. Therefore, the corrosion resistance of the reinforced mortar was improved after corrosion initiation.
RESUMEN
The crystallinity of a nonfullerene small-molecule acceptor plays an important function in the bimolecular recombination and carrier transfer of polymer solar cells (PSCs). However, because of the competition between the donor (PBDB-T) and acceptor (ITIC) in processes of phase separation and crystallization, the PBDB-T preferentially forms a crystalline network, which limits the molecular diffusion of ITIC and leads to the weak crystallinity of ITIC, eventually restricting the photoelectric conversion efficiency (PCE) of PSCs. Therefore, in our work, a small-molecule biomaterial, Gly-His-Lys-Cu (SMBM GHK-Cu), is incorporated into binary PBDB-T:ITIC to construct a PBDB-T:ITIC:GHK-Cu ternary system. The addition of GHK-Cu increases ITIC crystallinity and promotes the formation in continuous single-phase domains of PBDB-T and ITIC, which creates an optimized bicontinuous network path to increase and balance charge transmission in PSCs. Meanwhile, GHK-Cu makes energy transfer from GHK-Cu to PBDB-T appreciably efficient, improving the photon capture and exciton-generation rate of PBDB-T. Moreover, it can form a complementary absorption spectrum with PBDB-T and ITIC, which enhances the PCE of ternary devices. Excitingly, the PCE of PSC-based PBDB-T:ITIC is enhanced from 10.28% to 12.07% via incorporating 0.1 wt % GHK-Cu into PBDB-T:ITIC, in which the enhanced open voltage (VOC) is 0.92 V, the short-circuit current (JSC) is 17.87 mA/cm2, and the fill factor (FF) is 73.4%. Meanwhile, the PCE of PSC-based PM6:Y6 is also enhanced from 15.21% for a binary PSC to 17.11% for ternary PSC-based PM6:Y6:0.1 wt % GHK-Cu. This work shows that the cheap and environmentally friendly GHK-Cu has great potential for application in tuning the crystallinity and phase separation of the active layer.
RESUMEN
Developing efficient and stable earth-abundant electrocatalysts for acidic oxygen evolution reaction is the bottleneck for water splitting using proton exchange membrane electrolyzers. Here, we show that nanocrystalline CeO2 in a Co3O4/CeO2 nanocomposite can modify the redox properties of Co3O4 and enhances its intrinsic oxygen evolution reaction activity, and combine electrochemical and structural characterizations including kinetic isotope effect, pH- and temperature-dependence, in situ Raman and ex situ X-ray absorption spectroscopy analyses to understand the origin. The local bonding environment of Co3O4 can be modified after the introduction of nanocrystalline CeO2, which allows the CoIII species to be easily oxidized into catalytically active CoIV species, bypassing the potential-determining surface reconstruction process. Co3O4/CeO2 displays a comparable stability to Co3O4 thus breaks the activity/stability tradeoff. This work not only establishes an efficient earth-abundant catalysts for acidic oxygen evolution reaction, but also provides strategies for designing more active catalysts for other reactions.
RESUMEN
Electrochemical water splitting in alkaline media plays an important role in mass production of hydrogen. Ruthenium (Ru), as the cheapest member of platinum-group metals, has attracted much attention, and the incorporation of trace amount of Ru with cobalt phosphide could significantly improve the hydrogen evolution reaction (HER) catalytic activity. In this work, ruthenium-incorporated cobalt phosphide nanocubes are synthesized via a reaction between Co-Co Prussian blue analog (Co-PBA) and ruthenium chloride (RuCl3) followed by the phosphidation. The sample with a Ru content of ~2.04 wt.% exhibits the best HER catalytic activity with a low overpotential of 51 and 155 mV, to achieve the current densities of -10 and -100 mA cm-2, respectively, and the Tafel slope of 53.8 mV dec-1, which is comparable to the commercial Pt/C. This study provides a new perspective to the design and construction of high performance electrocatalysts for HER and other catalytic applications in a relatively low price.
RESUMEN
Replacement of rare and precious metal catalysts with low-cost and earth-abundant ones is currently among the major goals of sustainable chemistry. Herein, we report the synthesis of S, N dual-doped graphene-like carbon nanosheets via a simple pyrolysis of a mixture of melamine and dibenzyl sulfide as efficient metal-free electrocatalysts for oxygen reduction reaction (ORR). The S, N dual-doped graphene-like carbon nanosheets show enhanced activity toward ORR as compared with mono-doped counterparts, and excellent durability in contrast to the conventional Pt/C electrocatalyst in both alkaline and acidic media. A high content of graphitic-N and pyridinic-N is necessary for ORR electrocatalysis in the graphene-like carbon nanosheets, but an appropriate amount of S atoms further contributes to the improvement of ORR activity. Superior ORR performance from the as-prepared S, N dual-doped graphene-like carbon nanosheets implies great promises in practical applications in energy devices.