A Standardized Rat Model to Study Peri-implantitis of Transmucosal Osseointegrated Implants.

With the high incidence rate, distinctive implant characteristic and unique infection pattern, peri-implantitis (PI) requires a specially designed implant animal model for the researches on the pathogenesis and treatments. Previous small-animal PI models exhibit variability in implant site selection, design, and surgical procedures resulting in unnecessary tissue damage and less effectivity. Herein, a quantitative-analysis-based standardized rat model for transmucosal PI-related research was proposed. After dissecting the anatomic structures of the rat maxilla, we determined that placing the implant anterior to the molars in the rat maxilla streamlined the experimental period and enhanced animal welfare. We standardized the model by controlling the rat strain, gender, and size. The customized implant and a series of matched surgical instruments were appropriately designed. A clear, step-by-step surgical process was established. These designs ensured the success rate, stability, and replicability of the model. Each validation method confirmed the successful construction of the model. This study proposed a quantitative-analysis-based standardized transmucosal PI rat model with improved animal welfare and reliable procedures. This model could provide efficient in vivo insights to study the pathogenesis and treatments of PI and preliminary screening data for further large-animal and clinical trials.

Accuracy of 11 intraocular lens calculation formulas in shallow anterior chamber eyes.

PURPOSE: To evaluate the performance of intraocular lens (IOL) calculation formulas and the effect of anterior chamber depth (ACD), axial length (AL) and lens thickness (LT) on the prediction accuracy in shallow ACD eyes. METHODS: This retrospective, consecutive case-series study included 648 eyes of 648 patients with an ACD < 3.0 mm who underwent phacoemulsification and IOL implantation. Eleven formulas were evaluated: Barrett Universal II (BUII), Emmetropia Verifying Optical (EVO) 2.0, Hill-Radial Basis Function (RBF) 3.0, Hoffer QST, Kane, Olsen, Pearl-DGS and traditional formulas (Haigis, Hoffer Q, Holladay 1 and SRK/T). Subgroup analysis was performed based on ACD, AL and LT. RESULTS: Overall, the Hoffer QST and Kane showed no systematic bias. The Kane, EVO 2.0, Hill-RBF 3.0 and Hoffer QST had relatively lower mean absolute error and higher percentages of prediction error within ±0.5 D. For the ACD of 2.5-3.0 mm and AL < 22.0 mm subgroup, the Pearl-DGS exhibited the lowest MAE (0.45 D) and MedAE (0.41 D). Most formulas had a significant myopic bias (-0.43 to -0.18 D, p < 0.05) in the LT < 4.3 mm subgroup and a significant hyperopic bias (0.09-0.29 D, p < 0.05) in the LT ≥ 5.1 mm subgroup. CONCLUSION: The Kane and Hoffer QST were recommended for shallow ACD eyes. In eyes with an ACD between 2.5 and 3.0 mm and a short AL, the Pearl-DGS showed excellent performance. Clinicians need to fine-tune the target refraction according to LT in shallow ACD eyes.

Is Astigmatism Correction Necessary for Patients With Cataract Who Have Corneal Astigmatism of Less Than 0.75 D?

PURPOSE: To investigate the proportion of patients with predicted refractive astigmatism (PRA) of 0.75 diopters (D) or greater and associated risk factors among cataract surgery candidates with low corneal astigmatism. METHODS: A retrospective cross-sectional study was conducted in Zhongshan Ophthalmic Center, Guangzhou, China. Patients with cataract who had preoperative simulated keratometric astigmatism of less than 0.75 D were recruited. The PRA was calculated by Barrett toric calculator using posterior corneal astigmatism (PCA) measured by the IOLMaster 700 (Carl Zeiss Meditec AG) and corneal surgically induced astigmatism (SIA). Two corneal incision locations (temporal [0°/180°], 135° incision) and varying magnitudes (0.10 to 0.60 D) were considered for SIA. Multiple logistic regression analysis was used to explore risk factors associated with PRA of 0.75 D or greater and build predictive model. Sensitivity analysis was performed using PRA threshold of 0.50 D. RESULTS: A total of 1,750 eyes from 1,750 patients were included (mean age: 60.14 ± 13.24 years, 42.91% male, 1,010 right eyes and 740 left eyes). The 135° incision (odds ratio [OR]: 17.86) and against-the-rule (ATR) astigmatism (OR: 37.55) are the major risk factors for PRA of 0.75 D or greater. Higher simulated keratometric astigmatism (OR: 2.03), larger PCA (OR: 1.64), and surgically induced astigmatism (OR: 1.29) also significantly increased the risk of PRA of 0.75 D or greater. Nomogram model were constructed with an area under curve of 0.90. CONCLUSIONS: For patients with corneal astigmatism of less than 0.75 D, temporal incision and measured PCA is preferred. Those patients with ATR astigmatism should be considered for astigmatism correction when using a 135° incision. [J Refract Surg. 2023;39(12):850-855.].

Tailoring the multiscale mechanics of tunable decellularized extracellular matrix (dECM) for wound healing through immunomodulation.

With the discovery of the pivotal role of macrophages in tissue regeneration through shaping the tissue immune microenvironment, various immunomodulatory strategies have been proposed to modify traditional biomaterials. Decellularized extracellular matrix (dECM) has been extensively used in the clinical treatment of tissue injury due to its favorable biocompatibility and similarity to the native tissue environment. However, most reported decellularization protocols may cause damage to the native structure of dECM, which undermines its inherent advantages and potential clinical applications. Here, we introduce a mechanically tunable dECM prepared by optimizing the freeze-thaw cycles. We demonstrated that the alteration in micromechanical properties of dECM resulting from the cyclic freeze-thaw process contributes to distinct macrophage-mediated host immune responses to the materials, which are recently recognized to play a pivotal role in determining the outcome of tissue regeneration. Our sequencing data further revealed that the immunomodulatory effect of dECM was induced via the mechnotrasduction pathways in macrophages. Next, we tested the dECM in a rat skin injury model and found an enhanced micromechanical property of dECM achieved with three freeze-thaw cycles significantly promoted the M2 polarization of macrophages, leading to superior wound healing. These findings suggest that the immunomodulatory property of dECM can be efficiently manipulated by tailoring its inherent micromechanical properties during the decellularization process. Therefore, our mechanics-immunomodulation-based strategy provides new insights into the development of advanced biomaterials for wound healing.

Placement accuracy and primary stability of implants in the esthetic zone using dynamic and static computer-assisted navigation: A retrospective case-control study.

STATEMENT OF PROBLEM: Both the placement accuracy and primary stability of implants are important to implant therapy in the esthetic zone. The effect of dynamic and static computer-assisted navigation on the primary stability of implants in the esthetic zone remains uncertain. PURPOSE: The purpose of this case-control study was to investigate the effect of dynamic and static computer-assisted navigation on the placement accuracy and primary stability of implants in the esthetic zone. MATERIAL AND METHODS: Partially edentulous participants who received at least 1 implant in the anterior maxilla using either fully guided static or dynamic computer-assisted implant surgery (s-CAIS, d-CAIS) from January 2020 to February 2022 were screened. Participant demographic information, timing of implant placement, primary stability represented by the insertion torque value (ITV) in Ncm, and implant survival were collected from the treatment record. Bone quality at the implant sites was determined according to the Lekholm and Zarb classification. The accuracy of implant placement represented by the linear (platform: Dpl, mm; apex: Dap, mm) and angular deviations (axis: Dan, degree) between the planned and placed implants was evaluated based on the preoperative surgical plan and postoperative cone beam computed tomography (CBCT) data. A statistical analysis of the data was completed by using the chi-square, Fisher exact, Student t, and Mann-Whitney U tests (α=.05). RESULTS: A total of 32 study participants (38 implants) were included. The groups of s-CAIS (16 participants, 18 implants) and d-CAIS (16 participants, 20 implants) were statistically comparable in sex (P=.072), age (P=.548), bone quality (P=.671), and timing of implant placement (P=.719). All implants survived during an average follow-up period of 13 months. The d-CAIS group showed close linear deviations (Dpl 1.07 ±0.57 mm, Dap 1.26 ±0.53 mm) but lower angular deviation (Dan 2.14 ±1.20 degrees) and primary stability (ITV 25.25 ±7.52 Ncm) than the s-CAIS group (Dpl 0.92 ±0.46 mm, Dap 1.31 ±0.43 mm, Dan 3.31 ±1.61 degrees, ITV 30.56 ±11.23 Ncm, PDpl=.613, PDap=.743, PDan=.016, PITV=.028). CONCLUSIONS: Comparable linear positioning accuracy and higher angular deviation were found for implants placed in the esthetic zone by using s-CAIS than when using d-CAIS. Higher primary stability of implants may be achieved by using s-CAIS, as s-CAIS seemed to have higher osteotomy accuracy than d-CAIS.

Effect of Scan Pattern on the Accuracy of Complete-Arch Digital Implant Impressions with Two Intraoral Scanners.

PURPOSE: To evaluate the effect of six scan patterns on the accuracy and speed of digital impressions with two different intraoral scanners for complete-arch implant rehabilitation. MATERIALS AND METHODS: A master model containing six parallelly placed implant analogs was fabricated, and six scan bodies were connected to the analogs. Reference scan was obtained with a laboratory scanner. Test scans were obtained by intraoral scanning with six scan patterns using 3Shape TRIOS 3 and Carestream CS 3600 intraoral scanners. Scanning time was recorded. Trueness and precision were assessed with an inspection software. Two-way analysis of variance (ANOVA) was performed to examine the effect of scan pattern, scanner, and their interaction on accuracy and scanning time. Differences between the six scan patterns with each scanner were tested by one-way ANOVA. Differences between the two scanners were evaluated by t test. The level of significance was set at α = .05. RESULTS: For trueness, the effects of scanner, scan pattern, and their interaction were significantly different in both linear and angular discrepancy. For precision, the scanner and scan pattern each had a significant effect on linear discrepancy independently, while their interaction did not. Only the effects of scanners were significantly different in angular discrepancy. For each of the two scanners, significant differences were detected in accuracy and speed between the patterns. CONCLUSION: Scan pattern significantly influenced the accuracy and speed of digital impressions for complete-arch implant rehabilitation.

Design of Flexible Film-Forming Polydopamine/Polypyrrole/Nanodiamond Hierarchical Structure for Broadband Microwave Absorption.

Microwave-absorbing materials are widely used in numerous fields, including the military, daily protection, etc. Currently, in addition to being lightweight and highly efficient, good film-forming processing characteristics and environmental stability are also required for the practical application of microwave-absorbing materials, which, in general, are difficult to make compatible. In this paper, a mulberry-like PDA/PPy/ND hierarchical structure was prepared by in situ polymerization. The hierarchical structure showed remarkably enhanced microwave absorption, as well as better flexible film-forming characteristics, thanks to the multiple roles PDA played in the system. The optimal RL peak for PDA/PPy/ND could reach -43.6 dB at 7.58 GHz, which is mainly attributed to the multiple dielectric loss paths and significantly improved impedance-matching characteristics. Furthermore, given the H-bond crosslink, the introduction of PDA also promoted the film formation and dispersion of PDA/PPy/ND in the PVA matrix, forming a water-resistant and flexible film. This work provides a referencing path for the design and practical applications of lightweight microwave-absorbing materials.

Improved accuracy of digital implant impressions with newly designed scan bodies: an in vivo evaluation in beagle dogs.

BACKGROUND: The accuracy of digital impressions for fully edentulous cases is currently insufficient for routinely clinical application. To overcome the challenge, a modified scan body was introduced, which demonstrated satisfactory accuracy in vitro. The aim of this study was to evaluate the accuracy of digital impressions using the modified scan bodies with extensional structure versus scan bodies without extensional structure in mandible with two implants in beagle dogs. METHODS: The unilateral mandibular second premolar to second molar were extracted in four beagle dogs. Twelve weeks later, two implants were placed. Five repeated digital impressions were performed with an intraoral scanner on each dog using each of the two different scan bodies: Group I-scan body without extensional structure (SB); Group II-scan body with extensional structure (SBE). The scans were exported to Standard Tessellation Language (STL) files to serve as test data. The dogs were sacrificed and the dissected mandibles were digitalized with a lab scanner to provide reference data. Linear and angular deviations were calculated in an inspection software for accuracy assessment. Statistical analysis was performed with two-way ANOVA. The level of significance was set at α = 0.05. RESULTS: For trueness assessment, the mean of absolute linear/angular deviations were 119.53 µm/0.75 degrees in Group I and 68.89 µm/0.36 degrees in Group II. SBE was more accurate than SB regarding both linear (p = 0.008) and angular (p = 0.049) deviations. For precision assessment, the mean of absolute linear/angular deviations were 63.01 µm/0.47 degrees in Group I and 38.38 µm/0.24 degrees in Group II. No significant difference was found. CONCLUSIONS: The application of SBE significantly improved the trueness of digital impressions in mandible with two implants compared to SB. No significant difference was found in terms of precision.

Mesenchymal stem cells ameliorate silica-induced pulmonary fibrosis by inhibition of inflammation and epithelial-mesenchymal transition.

Silicosis is a devastating occupational disease caused by long-term inhalation of silica particles, inducing irreversible lung damage and affecting lung function, without effective treatment. Mesenchymal stem cells (MSCs) are a heterogeneous subset of adult stem cells that exhibit excellent self-renewal capacity, multi-lineage differentiation potential and immunomodulatory properties. The aim of this study was to explore the effect of bone marrow-derived mesenchymal stem cells (BMSCs) in a silica-induced rat model of pulmonary fibrosis. The rats were treated with BMSCs on days 14, 28 and 42 after perfusion with silica. Histological examination and hydroxyproline assays showed that BMSCs alleviated silica-induced pulmonary fibrosis in rats. Results from ELISA and qRT-PCR indicated that BMSCs inhibited the expression of inflammatory cytokines TNF-α, IL-1ß and IL-6 in lung tissues and bronchoalveolar lavage fluid of rats exposed to silica particles. We also performed qRT-PCR, Western blot and immunohistochemistry to examine epithelial-mesenchymal transition (EMT)-related indicators and demonstrated that BMSCs up-regulate E-cadherin and down-regulate vimentin and extracellular matrix (ECM) components such as fibronectin and collagen Ⅰ. Additionally, BMSCs inhibited the silica-induced increase in TGF-ß1, p-Smad2 and p-Smad3 and decrease in Smad7. These results suggested that BMSCs can inhibit inflammation and reverse EMT through the inhibition of the TGF-ß/Smad signalling pathway to exhibit an anti-fibrotic effect in the rat silicosis model. Our study provides a new and meaningful perspective for silicosis treatment strategies.

SPP1 derived from silica-exposed macrophage exosomes triggers fibroblast transdifferentiation.

The occurrence and development of silicosis is related to the interaction of multiple cells through signal transmission caused by silica dust. Including inflammatory changes reduced by macrophages and phenotypic transdifferentiation reduced by lung fibroblasts. As a communication medium between cells, exosomes have become a hot research topic. To explore the role of exosomal proteins in the occurrence and development of silicosis and the possible intervention targets, this study conducted proteomic analysis of macrophage-derived exosomes induced by silica, to identify specific proteins for intervention. In this study, we used proteomic analysis to screen exosomal protein profiles from the RAW264.7 macrophages exposed to silica. A total of 291 proteins were differentially expressed, of which 178 were upregulated and 113 were downregulated. By performing functional annotation and analysis of the differentially expressed proteins, we identified proteins SPP1, HMGB3, and HNRNPAB, which were consistent with the proteomics analysis. The involvement of SPP1 protein in fibrosis was studied further. Knocking down the expression of SPP1 in exosomes resulted in a decrease in fibrosis-related indicators. These results help to understand that exosomal protein can mediate cell communication and play a key role in the transition from fibroblasts to myofibroblasts. Further, this study also provided strategies and scientific basis for future studies on the intervention of silicosis.

Bone marrow-derived mesenchymal stem cells attenuate silica-induced pulmonary fibrosis by inhibiting apoptosis and pyroptosis but not autophagy in rats.

This study aimed to investigate the effect of bone marrow-derived mesenchymal stem cells (BMSCs) on silica-induced lung fibrosis in a rat model. Thirty SD rats were randomly divided into three groups: control group, silica group, and BMSC group (n = 10 rats per group). BMSCs were injected successively into rats on the 14th, 28th, and 42nd days after silica exposure. All rats were sacrificed 56 days after silica exposure. We detected the pathological and fibrotic changes, apoptosis, autophagy, and pyroptosis in their lung tissue by histopathological examination, hydroxyproline content assays, real-time quantitative polymerase chain reactions, western blot assays, immunohistochemistry staining, immunofluorescence staining, and enzyme-linked immunosorbent assays. We found that BMSCs significantly relieved lung inflammatory infiltrates, collagen deposition, hydroxyproline content, and the mRNA and protein levels of collagen 1 and fibronectin. Compared to the silica group, in the BMSC group, apoptosis-associated proteins, including cleaved caspase 3 and Bax, were significantly downregulated, and Bcl-2/Bax was significantly upregulated; pyroptosis-related proteins, including Nlrp3, cleaved caspase 1, IL-1ß, and IL-18, were significantly reduced. However, the BMSCs had no significant impact on autophagy-related proteins, including Beclin 1, P62, and LC3. In summary, BMSCs protected lung tissue against severe fibrosis by inhibiting apoptosis and pyroptosis but not autophagy.

Comprehensive Analysis of lncRNAs Related to the Prognosis of Esophageal Cancer Based on ceRNA Network and Cox Regression Model.

BACKGROUND: Esophageal cancer is one of the most deadly malignant tumors. Among the common malignant tumors in the world, esophageal cancer is ranked seventh, which has a high mortality rate. Long noncoding RNAs (lncRNAs) play an important role in the occurrence and development of various tumors. lncRNAs can competitively bind microRNAs (miRNAs) with mRNA, which can regulate the expression level of the encoded gene at the posttranscriptional level. This regulatory mechanism is called the competitive endogenous RNA (ceRNA) hypothesis, and ceRNA has important research value in tumor-related research. However, the regulation of lncRNAs is less studied in the study of esophageal cancer. METHODS: The Cancer Genome Atlas (TCGA) database was used to download transcriptome profiling data of esophageal cancer. Gene expression quantification data contains 160 cancer samples and 11 normal samples. These data were used to identify differentially expressed lncRNAs and mRNAs. miRNA expression data includes 185 cancer samples and 13 normal samples. The differentially expressed RNAs were identified using the edgeR package in R software. Then, the miRcode database was used to predict miRNAs that bind to lncRNAs. MiRTarBase, miRDB, and TargetScan databases were used to predict the target genes of miRNAs. Cytoscape software was used to draw ceRNA network. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analyses were performed using DAVID 6.8. Finally, multifactor cox regression was used to screen lncRNAs related to prognosis. RESULTS: We have screened 1331 DElncRNAs, 3193 DEmRNAs, and 162 DEmiRNAs. Among them, the ceRNA network contains 111 lncRNAs, 11 miRNAs, and 63 DEmRNAs. Finally, we established a prediction model containing three lncRNAs through multifactor Cox regression analysis. CONCLUSIONS: Our research screened out three independent prognostic lncRNAs from the ceRNA network and constructed a risk assessment model. This is helpful to understand the regulatory role of lncRNAs in esophageal cancer.

Evaluation of laboratory scanner accuracy by a novel calibration block for complete-arch implant rehabilitation.

OBJECTIVES: To compare the accuracies of 4 laboratory scanners using a new custom-made block for complete-arch implant rehabilitation. MATERIALS AND METHODS: A block comprised 4 cylinders, with 2 in the anterior (0° angulation) and 2 in the posterior region (45° distal angulation) (Experimental group) and a standard block with 2 parallel cones in 16° taper (ISO group), were fabricated. Both blocks were scanned consecutively for 15 times by 4 laboratory scanners: IScan, Zfx, 3Shape, and KaVo. Measurements were also made by a coordinate measuring machine (CMM) as the reference. Acquired digital models were inspected with a metrology software. Linear and angular distortions were computed evaluation of trueness, precision and expanded uncertainty of scanners. Effects of blocks and scanners on the scanning trueness and precision were analyzed by Two-way ANOVA (α = 0.05). RESULTS: The linear trueness and precision of scanners was significantly poorer when the Experimental block instead of ISO block was used. Significant greater distortions were noticed at the 45° sites than the 0° sites and no significant effect of inter-implant distance on the scanning accuracy was found. Zfx, IScan and 3Shape exhibited comparable expanded uncertainties (10.6∼11.8) but KaVo showed the greatest (19.3) in complete-arch implant scans. CONCLUSION: The ISO block might not be more suitable than the Experimental block for evaluating the accuracy of laboratory scanner for complete-arch implant scanning. All the scanners tested except one demonstrated acceptable accuracy for complete-arch implant digitization. Scanning accuracy was compromised by unfavourable angulation of implants. CLINICAL SIGNIFICANCE: It is questionable whether the laboratory scanners validated for tooth-borne cases could also perform well for implant cases. It might be necessary to develop a new calibration object specifically for complete-arch implant scenarios to verify the capability of laboratory scanners in the implant workflow.

Effects of fluorinated porcine hydroxyapatite on lateral ridge augmentation: an experimental study in the canine mandible.

PURPOSE: The aim of this study was to evaluate the effects of porcine hydroxyapatite (PHA) and fluorinated porcine hydroxyapatite (FPHA) applied concomitantly with collagen membranes (CMs) on bone regeneration in mandibular lateral ridge defects. MATERIALS AND METHODS: Mandibular third premolar to second molar were extracted bilaterally in six male beagle dogs. After 8 weeks of healing, six standardized box-shaped defects were bilaterally created at the buccal aspect of the mandibles and randomly allocated in a split-mouth design to the (i) PHA, (ii) FPHA or (iii) blank group and covered with CMs. After 12 weeks, biopsies of the defects were obtained for micro-computed tomography (micro-CT) evaluation and histological analysis. RESULTS: Both FPHA and PHA promoted new bone formation and showed a better ridge width maintenance capacity than the blank control treatment. The micro-CT evaluation showed that the bone volume fraction (BV/TV) in the FPHA group was significantly higher than that in the PHA group. The trabecular number (Tb.N) in the FPHA group was significantly higher than that in the blank group. Histomorphometric analysis revealed a significantly larger area and higher ratio of newly formed bone in the FPHA group than those in the PHA group. The ratio of non-mineralized tissue in the FPHA group was significantly lower than that in the PHA group. No significant difference in the amount of residual materials was found between the FPHA and PHA groups. CONCLUSIONS: FPHA achieved better ridge width maintenance and bone regeneration outcomes than PHA as a bone substitute in lateral ridge augmentation.

Carbonized polyaniline bridging nanodiamond-graphene hybrids for enhanced microwave absorptions with ultrathin thickness.

For conventional design of the electromagnetic absorption materials, introduction of magnetic materials into dielectric materials has been found to achieve better impedance matching, but lead to increase in weight and decrease in chemical stability, therefore limiting their practical applications. In this work, metal-free electromagnetic coupling was achieved by the design of nitrogen-doped nanodiamond/graphene hybrids. Polyaniline is used to self-assembled bridge the nanodiamond and graphene, and the carbonization is carried out for construction and regulation of the C•••N polarization and nitrogen doping. The carbonized hybrid exhibits remarkably enhanced broadband electromagnetic absorption with the optimal reflection loss value around -47.7 dB at 13.8 GHz with an ultrathin thickness of 1.8 mm. The enhancement in electromagnetic absorption is confirmed to result from nitrogen doped ND induced magnetic dissipation and the C•••N multi-polarization modes, as well as the multiple interfacial structures. This work opens a new route realizing lightweight electromagnetic absorption through constructing nitrogen doped carbon nanomaterial.

Improved scanning accuracy with newly designed scan bodies: An in vitro study comparing digital versus conventional impression techniques for complete-arch implant rehabilitation.

OBJECTIVES: To compare the accuracy of an original and two newly designed CAD/CAM scan bodies used in digital impressions with one another as well as conventional implant impressions. MATERIAL AND METHODS: A reference model containing four implants was fabricated. Digital impressions were taken using an intraoral scanner with different scan bodies: original scan bodies for Group I (DO), CAD/CAM scan bodies without extensional structure for Group II (DC), and CAD/CAM scan bodies with extensional structure for Group III (DCE). For Group IV, conventional splinted open-tray impressions (CI) were taken. The reference model and conventional stone casts were digitalized with a laboratory reference scanner. The Standard Tessellation Language datasets were imported into an inspection software for trueness and precision assessment. Statistical analysis was performed with a Kruskal-Wallis test and Dunn-Bonferroni test. The level of significance was set at α = .05. RESULTS: The median of trueness was 35.85, 38.50, 28.45, and 25.55 µm for Group I, II, III, and IV, respectively. CI was more accurate than DO (p = .015) and DC (p = .002). The median of precision was 48.40, 48.90, 27.30, and 19.00 for Group I, II, III, and IV, respectively. CI was more accurate than DO (p < .001), DC (p < .001), and DCE (p = .007). DCE was more accurate than DC (p < .001) and DO (p < .001). CONCLUSIONS: The design of the extensional structure could significantly improve scanning accuracy. Conventional splinted open-tray impressions were more accurate than digital impressions for full-arch implant rehabilitation.

Exosomal miR-125a-5p derived from silica-exposed macrophages induces fibroblast transdifferentiation.

Silica particles can cause a systemic disease in workers termed lung silicosis, characterized by diffuse fibrosis. The development of lung silicosis involves various signaling pathway networks comprising numerous cell types and cytokines. As an important medium for communication between cells, exosomes have emerged as a hot research topic; however, the role of exosomal microRNAs (miRNAs) in silicosis remains unclear. In this study, we conducted high-throughput sequencing to generate exosomal miRNAs profiles from macrophages that were either exposed to silica or not. A total of 298 miRNAs were differentially expressed, with 155 up-regulated and 143 down-regulated. Highly conserved differentially expressed miRNAs were functionally annotated and analyzed to predict target genes. Among target interactions associated with the TGF-ß signaling pathway, miR-125a-5p and its putative target gene, Smurf1, were subjected to further research. As expected, levels of miR-125a-5p were upregulated in human serous exosomes and vitro, and inhibit the exosomal miR-125a-5p suppressed the expression of the fibrosis hallmarks. Besides, high levels of the miRNA led to upregulation of smooth muscle actin alpha and repression of Smurf1 in NIH-3T3 and MRC-5 cells. ID1 and SMAD1, downstream of TGF-ß signaling, were upregulated, indicating potential activation of this signaling pathway. These results contribute to understanding of the intercellular communication mediated by exosomal miRNAs and its critical role in fibroblast to myofibroblast transition and silicosis.

Effects of cyclophosphamide on the phenotypes and functions of THP-1 cells.

Early and accurate evaluation of immunotoxicity is crucial. However, there are few in vitro models for immunosuppressive evaluation. THP-1 cells has long been used for in vitro sensitivity evaluation. Whether it can be used for immunosuppressive evaluation remains unclear. In this study, effects of immunosuppressant cyclophosphamide (CY) on THP-1 cells were observed while 2, 4-Dinitrochlorobenzene (DNCB) was used as a control. The phenotypes of THP-1 cells, the ability to activate naïve T cells, intracellular reactive oxygen species (ROS) level, gene markers, phagocytic ability and cell apoptosis were detected after THP-1 cells being exposed to different concentrations of CY and DNCB. Both CY and DNCB were able to activate THP-1 cells, but there were a lot of differences in their effects on THP-1 cells, such as the changes in phenotypes, in the ability to activate naïve T cells, in ROS production and in marker gene expression. Firstly, CY down-regulated the expression of CD86 on THP-1 cells while DNCB up-regulated its expression. Secondly, the ability of THP-1 cells to activate naïve T cells was enhanced by CY and suppressed by DNCB. Thirdly, CY raised rapid and transient elevation of ROS level in THP-1 cells, while the effects of DNCB were slower and longer-lasting. Finally, only CY could lead to an increase in heme oxygenase 1 (HMOX1) expression. Taken all these results into account, we suggested that THP-1 cell line possesses the potency to be an in vitro model of immunosuppressive evaluation. And the surface molecule CD86, the ability to activate naïve T cells, the ROS production and the gene marker HMOX1 of THP-1 cells are promising markers.

Effects of Cast-Iron Surface Texturing on the Anti-Scuffing Performance under Starved Lubrication.

Advances in heavy-duty diesel engine designs place higher demands on the friction and wear performance of the piston ring and cylinder liner (PRCL) interface. The potential of using micro-textures machined on the whole stroke of a cast-iron cylinder liner was investigated in this work. A set of running-in and starved lubrication experiments was performed using a custom reciprocating test rig that imparts a combination of combustion-level pressures and the resulting impacts. Based on a comparison of micro-dimple parameters, the friction coefficient for the running-in period at the shocking dead center was the smallest at a designed combination of 1000-µm diameter, 22% area fraction, and arrangement with half-radius intersecting distance of two adjacent micro-dimple columns. The non-scuffing time under starvation was the longest at a designed combination of the following parameters: 800 µm diameter, 22% area fraction, and quarter-radius intersecting distance arrangement. From finite element analysis, it was found that stress concentrates at the micro-dimple periphery and at the connections between adjacent micro-dimples. However, surface topography examination showed that scuffing initiates in the non-dimpled regions between the micro-dimpled columns rather than at their edges. Finally, under reciprocating motion, micro-dimples can collect wear debris to inhibit further propagation of scuffing in the micro-dimpled region.

Wear Evolution of the Glass Fiber-Reinforced PTFE under Dry Sliding and Elevated Temperature.

The wear evolution of the glass fiber reinforced Polytetrafluoroethylene (PTFE) sliding against duplex steel at elevated temperature was investigated using the interrupted wear tests coupling with the worn surface observations. The morphological changes of the PTFE composite during the sliding were related to the variation of the tribological properties to analyze the underlying wear mechanisms. Results show that the coefficient of friction and wear rate change with the increase of temperature. During the sliding, three regions can be identified regardless of the temperature. The high temperature is beneficial to the formation of tribo-film. The sequence of wear evolution is PTFE removal, load transfer to glass fiber, and minor formation of tribo-film for the low temperature condition. For high temperatures, the wear behaviors are more complicated. The different phenomena include the third body abrasion, flake delamination of PTFE matrix, scratching and reformation of transfer film on the counterface, and the filling of the large scale PTFE groove. These behaviors may dominate the different stages in the stable region, but occur simultaneously and cause the dynamic steady wear. As a result, the wear rate at 200 °C is slightly fluctuant.