RESUMEN
Co-pyrolysis of coal and biomass is an efficient way to utilize resources. This study investigates the co-pyrolysis behavior and kinetics of coal and biomass using thermogravimetric analysis (TGA) and TG-FTIR. Co-pyrolysis of coal and biomass exhibits a synergistic effect. When the biomass is 25%, the weight loss increases, showing a positive synergistic effect. When the biomass is 50%, it exhibits a negative synergistic effect. Increasing the heating rate can promote the generation of a synergistic effect. Co-pyrolysis involves two central pyrolysis stages: stage III (250-380 °C) and stage IV (380-550 °C). Friedman, FWO, KAS, and STA methods are used to calculate the activation energy for stages III and IV. The activation energy (E α) for co-pyrolysis is higher than that for coal or biomass pyrolysis alone. A positive synergistic effect is observed in stage III, while a negative synergistic effect is noted in stage IV. The master curve method determines an accurate reaction order (n) and pre-exponential factor (A) value of Coal75-Bio25. In stage III, E α = 238.81 kJ/mol, n = 2.4, A = 1.30 × 1021 s-1. In stage IV, E α = 37 8.01 kJ/mol, n = 4.0, A = 1.10 × 1027 s-1. The kinetic parameters in stage IV are significantly higher than those in stage III. TG-FTIR is used to analyze the synergistic effect of co-pyrolysis. Compared with coal and biomass pyrolysis separately, the Coal75-Bio25 pyrolysis process releases less CO2 and more CH4. These findings support the synergistic effect of coal and biomass during co-pyrolysis.
RESUMEN
Flare and multiple recurrences pose significant challenges in gouty arthritis. Traditional treatments provide temporary relief from inflammation but fail to promptly alleviate patient pain or effectively prevent subsequent recurrences. It should also be noted that both anti-inflammation and metabolism of uric acid are necessary for gouty arthritis, calling for therapeutic systems to achieve these two goals simultaneously. In this study, we propose a biomimetic integrated nanozyme, HMPB-Pt@MM, comprising platinum nanozyme and hollow Prussian blue. It demonstrates anti-inflammatory properties by eliminating reactive oxygen species and reducing infiltration of inflammatory macrophages. Additionally, it rapidly targets inflamed ankles through the camouflage of macrophage membranes. Furthermore, HMPB-Pt@MM exhibits urate oxidase-like capabilities, continuously metabolizing locally elevated uric acid concentrations, ultimately inhibiting multiple recurrences of gouty arthritis. In summary, HMPB-Pt@MM integrates ROS clearance with uric acid metabolism, offering a promising platform for the treatment of gouty arthritis.
RESUMEN
The use of reclaimed water for urban river replenishment has raised concerns regarding its impact on water quality and aquatic ecosystems. This study aims to reveal the improvements seen in an urban river undergoing a practical water eco-remediation after being replenished with reclaimed water. A one-year monitoring of water quality, phytoplankton, and zooplankton was carried out in Dongsha River undergoing eco-remediation in Beijing, China. The results showed that compared to the unrestored river, the concentrations of COD, NH4+-N, TP, and TN decreased by 28.22 ± 7.88 %, 40.24 ± 11.77 %, 44.17 ± 17.29 %, and 28.66 ± 10.39 % in the restoration project area, respectively. The concentration of Chlorophyll-a in the restoration area was maintained below 40 µg/L. During summer, when algal growth is vigorous, the density of Cyanophyta in the unrestored river decreased from 46.84 × 104cells/L to 16.32 × 104cells/L in the restored area, while that of Chlorophyta decreased from 41.61 × 104cells/L to 11.87 × 104cells/L, a reduction of 65.16 % and 71.47 %, respectively. The dominant phytoplankton species were replaced with Bacillariophyta, such as Synedra sp. and Nitzschia sp., indicating that the restoration of aquatic plants reduces the risk of Cyanophyta blooms. Zooplankton species also changed in the restoration area, especially during summer. The density of pollution-tolerant Rotifer and Protozoa decreased by 31.06 % and 27.22 %, while the density of clean water indicating Cladocera increased by 101.19 %. We further calculated the diversity and evenness index of phytoplankton and zooplankton within and outside the restoration area. The results showed that the Shannon-Weaver index for phytoplankton and zooplankton in the restoration area was 2.1 and 1.91, which was higher than those in the river (1.84 and 1.82). This further confirmed that aquatic plant restoration has positive effects. This study can provide a practical reference and theoretical basis for the implementation of water ecological restoration projects in other reclaimed water rivers in China.
Asunto(s)
Cianobacterias , Diatomeas , Animales , Calidad del Agua , Beijing , Ecosistema , Ríos , China , Fitoplancton , Zooplancton , Monitoreo del AmbienteRESUMEN
Stability of displacement front is of great importance in the immiscible fluid displacement for enhancing oil recovery. Here, a CO2-strenghened assembly approach is demonstrated for the fabrication of highly jammed CNSs (cellulose nanocrystal surfactants) with EPD (N'-ethylpropane-1,3-diamine) and TOCNC (TEMPO oxidized cellulose nanocrystal), which produce a structured film at the oil-water interface to counteract the capillary force, and thus governing the local displacing pattern. In this approach, EPD molecules can be deeply protonated in the presence of CO2, favoring their binding forces with TOCNC at the interface to produce more CNSs. Meanwhile, the strong intermolecular attractions among CO2-bearing CNSs promote to form a striped interfacial film with both the close-packed rod-like arrays in horizontal and the multi-layer in lateral. Further, the CNSs-based film confers with a high strength and elasticity can reduce the capillary force by 87 % in micro-channels, yielding a smooth water-to-oil displacement front, which markedly enhances the oil recovery by 20.6 % compared to the surfactant-only flooding. This self-assembly strategy has a great implication in eco-friendly and cost-effective applications, such as enhanced oil recovery, CO2 geo-sequestration, and water infiltration.