RESUMEN
A disordered crystal structure is an asymmetrical atomic lattice resulting from the missing atoms (vacancies) or the lattice misarrangement in a solid-state material. It has been widely proven to improve the electrocatalytic hydrogen evolution reaction (HER) process. In the present work, due to the special physical properties (the low evaporation temperature of below 900 °C), Zn is utilized as a sacrificial component to create senary PtIrNiCoFeZn high-entropy alloy (HEA) with highly disordered lattices. The structure of the lattice-disordered PtIrNiCoFeZn HEA is characterized by the thermal diffusion scattering (TDS) in transmission electron microscope. Density functional theory calculations reveal that lattice disorder not only accelerates both the Volmer step and Tafel step during the HER process but also optimizes the intensity and distribution of projected density of states near the Fermi energy after the H2O and H adsorption. Anomalously high alkaline HER activity and stability are proven by experimental measurements. This work introduces a novel approach to preparing irregular lattices offering highly efficient HEA and a TDS characterization method to reveal the disordered lattice in materials. It provides a new route toward exploring and developing the catalytic activities of materials with asymmetrically disordered lattices.
RESUMEN
Rice sheath blight, caused by the fungus Rhizoctonia solani, poses a significant threat to rice cultivation globally. This study aimed to investigate the potential mechanisms of action of camphor derivatives against R. solani. Compound 4o exhibited superior fungicidal activities in vitro (EC50 = 6.16 mg/L), and in vivo curative effects (77.5%) at 500 mg/L were significantly (P < 0.01) higher than the positive control validamycin·bacillus (66.1%). Additionally, compound 4o exhibited low cytotoxicity and acute oral toxicity for adult worker honeybees of Apis mellifera L. Mechanistically, compound 4o disrupted mycelial morphology and microstructure, increased cell membrane permeability, and inhibited both PDH and SDH enzyme activities. Molecular docking and molecular dynamics analyses indicated a tight interaction of compound 4o with PDH and SDH active sites. In summary, compound 4o exhibited substantial antifungal efficacy against R. solani, serving as a promising lead compound for further optimization of antifungal agents.
Asunto(s)
Alcanfor , Fungicidas Industriales , Simulación del Acoplamiento Molecular , Oryza , Enfermedades de las Plantas , Rhizoctonia , Rhizoctonia/efectos de los fármacos , Oryza/microbiología , Enfermedades de las Plantas/microbiología , Fungicidas Industriales/farmacología , Fungicidas Industriales/química , Animales , Alcanfor/farmacología , Alcanfor/química , Abejas/microbiología , Proteínas Fúngicas/metabolismo , Proteínas Fúngicas/química , Antifúngicos/farmacología , Antifúngicos/química , Antifúngicos/síntesis química , Relación Estructura-ActividadRESUMEN
BACKGROUND: Rice sheath blight caused by Rhizoctonia solani is a severe threat to the yield and quality of rice. Due to the unscientific abuse of common fungicides causing resistance and environmental issues, the development of new fungicides is necessary. In this study, we used citral as the lead compound, designed and synthesized a series of novel citral amide derivatives, and evaluated their antifungal activity and mode of action against R. solani. RESULT: Bioassay results indicated that the antifungal activities of most citral amide derivatives against R. solani were significantly improved compared to citral, with EC50 values ranging from 9.50-27.12 mg L-1. Among them, compound d21 containing the N-(pyridin-4-yl)carboxamide group exhibited in vitro and in vivo fungicidal activities, with curative effects at 500 mg L-1 as effectively as the commercial fungicide validamycin·bacillus. Furthermore, d21 prolonged the lag phase of the growth curve of R. solani, reduced the amount of growth, and inhibited sclerotium germination and formation. Mechanistically, d21 deformed the mycelia, increased cell membrane permeability, and inhibited the activities of antioxidant and tricarboxylic acid cycle (TCA)-related enzymes. Metabolome analysis showed the abundance of some energy-related metabolites within R. solani increased, and simultaneously the antifungal substances secreted by itself reduced. Transcriptome analysis showed that most genes encoding ATP-binding cassette (ABC) transporters and peroxisomes upregulated after the treatment of d21 and cell membrane destruction. CONCLUSION: This study indicates that novel citral amide derivatives possess antifungal activity against R. solani and are expected to develop an alternative option for chemical control of rice sheath blight. © 2024 Society of Chemical Industry.
Asunto(s)
Monoterpenos Acíclicos , Amidas , Fungicidas Industriales , Rhizoctonia , Rhizoctonia/efectos de los fármacos , Fungicidas Industriales/farmacología , Fungicidas Industriales/síntesis química , Fungicidas Industriales/química , Monoterpenos Acíclicos/farmacología , Amidas/farmacología , Amidas/química , Amidas/síntesis química , Enfermedades de las Plantas/microbiología , Enfermedades de las Plantas/prevención & control , Antifúngicos/farmacología , Antifúngicos/síntesis química , Antifúngicos/químicaRESUMEN
The aim of this study was to investigate the muscle fiber types and meat quality in four populations and estimate the heritability and correlation coefficients of those traits in Shanxia long black pig (SX). In this study, a total of 318 pigs were recorded for 16 traits of the muscle fiber types and meat quality in four populations, including 256 individuals from the new breed SX. The population had a significant effect on all recorded traits, and the meat quality of the Lulai black pig was better than the remaining populations. The heritability (h2 ) of meat quality traits was from 0.06 (pH at 24 h) to 0.47 (shearing force), and the muscle fiber types belonged to the traits with low to medium heritability. The density of total fiber had the highest h2 (0.40), while the percentage of type IIA had the lowest h2 (0.04). Most traits are phenotypically correlated with each other, but only a small proportion of traits are genetically correlated with each other. None fiber type genetically correlated with meat quality significantly, because the genetic correlation coefficients had large standard errors. These results provided some insights into genetic improvements for the meat quality in pig breeds and also indicated that the parameters of muscle fiber characteristics can explain parts of the variation in meat quality.
Asunto(s)
Carne , Fibras Musculares Esqueléticas , Humanos , Porcinos/genética , Animales , Fibras Musculares Esqueléticas/fisiología , Fenotipo , Carne/análisis , CruzamientoRESUMEN
Achieving stable Zn plating/stripping under high current density and large area capacity remains a major challenge for metal Zn anodes. To address this issue, common filter paper is utilized to construct 3D carbon fiber skeleton film modified with gradient Cu nanoparticles (CFF@Cu). The original zincophobic hydrophilic CFF is transformed into gradient zincophilic and reversed gradient hydrophilic composite, due to the gradient distribution of Cu nanoparticles. When CFF@Cu is placed above Zn foil as an auxiliary anode, Zn foil anode exhibits stable, reversible, and dendrite-free Zn plating/stripping for 1200 h at 10 mA cm-2 and 2 mAh cm-2, 2000 h at 2 mA cm-2 and 2 mAh cm-2, 340 h at 10 mA cm-2 and 10 mAh cm-2. Additionally, nucleation barrier of Zn, Zn2+ transport and deposition kinetics are improved. The deposits on the Zn foil anode become homogeneous, dense, and fine. Side reactions and by-products are effectively inhibited. The excellent performance is mainly attributed to the gradient zincophilic field in 3D CFF. A portion of Zn2+ is captured by Cu and deposited within CFF@Cu from bottom to top, which reduces and homogenizes Zn2+ flux on Zn foil, as well as weakens and homogenizes electric field on Zn foil.
RESUMEN
Co1.11Te2 nanoparticles are in-situ uniformly grown within mesoporous hollow carbon combination sphere (MHCCS@Co1.11Te2) using a hard-template and spray drying process, solution impregnation and pyrolysis tellurization. Material characterizations reveal that Co1.11Te2, with a diameter of â¼ 20 nm, is attached to the internal walls of the unit spheres or embedded in the mesopore shells of the unit spheres, presenting a distinctive "ships-in-combination-bottles" nanoencapsulation structure. In sodium-ion half-cells, MHCCS@Co1.11Te2 exhibits excellent cycling stability, achieving reversible capacities of 257 mAh/g at 0.5 A/g after 250 cycles, 235 mAh/g at 1.0 A/g after 300 cycles and 161 mAh/g at 10.0 A/g after 1900 cycles. Electrochemical kinetic analyses and ex-situ characterizations reveal rapid electron/Na+ transport kinetics, prominent surface pseudocapacitive behavior, robust nanocomposite structure, and multi-step conversion reactions of sodium polytellurides. In sodium-ion full-cells, MHCCS@Co1.11Te2 still demonstrates stable cycling performance at 1.0 and 5.0 A/g and excellent rate capability. The superior electrochemical performance is associated with the nanoencapsulation structure based on mesoporous hollow carbon combination spheres, which promotes electron conduction and Na+ transport. The space-confined effect maintains the high electrochemical activity and cycling stability of Co1.11Te2.
RESUMEN
Disordered solid-solution high-entropy alloys have attracted wide research attention as robust electrocatalysts. In comparison, ordered high-entropy intermetallics have been hardly explored and the effects of the degree of chemical ordering on catalytic activity remain unknown. In this study, a series of multicomponent intermetallic Pt4 FeCoCuNi nanoparticles with tunable ordering degrees is fabricated. The transformation mechanism of the multicomponent nanoparticles from disordered structure into ordered structure is revealed at the single-particle level, and it agrees with macroscopic analysis by selected-area electron diffraction and X-ray diffraction. The electrocatalytic performance of Pt4 FeCoCuNi nanoparticles correlates well with their crystal structure and electronic structure. It is found that increasing the degree of ordering promotes electrocatalytic performance. The highly ordered Pt4 FeCoCuNi achieves the highest mass activities toward both acidic oxygen reduction reaction (ORR) and alkaline hydrogen evolution reaction (HER) which are 18.9-fold and 5.6-fold higher than those of commercial Pt/C, respectively. The experiment also shows that this catalyst demonstrates better long-term stability than both partially ordered and disordered Pt4 FeCoCuNi as well as Pt/C when subject to both HER and ORR. This ordering-dependent structure-property relationship provides insight into the rational design of catalysts and stimulates the exploration of many other multicomponent intermetallic alloys.
Asunto(s)
Aleaciones , Electrónica , Humanos , Entropía , Hidrógeno , Hipoxia , OxígenoRESUMEN
Introduction: Muscle glycolytic potential (GP) is a key factor affecting multiple meat quality traits. It is calculated based on the contents of residual glycogen and glucose (RG), glucose-6-phosphate (G6P), and lactate (LAT) contents in muscle. However, the genetic mechanism of glycolytic metabolism in skeletal muscle of pigs remains poorly understood. With a history of more than 400 years and some unique characteristics, the Erhualian pig is called the "giant panda" (very precious) in the world's pig species by Chinese animal husbandry. Methods: Here, we performed a genome-wide association study (GWAS) using 1.4M single nucleotide polymorphisms (SNPs) chips for longissimus RG, G6P, LAT, and GP levels in 301 purebred Erhualian pigs. Results: We found that the average GP value of Erhualian was unusually low (68.09 µmol/g), but the variation was large (10.4-112.7 µmol/g). The SNP-based heritability estimates for the four traits ranged from 0.16-0.32. In total, our GWAS revealed 31 quantitative trait loci (QTLs), including eight for RG, nine for G6P, nine for LAT, five for GP. Of these loci, eight were genome-wide significant (p < 3.8 × 10-7), and six loci were common to two or three traits. Multiple promising candidate genes such as FTO, MINPP1, RIPOR2, SCL8A3, LIFR and SRGAP1 were identified. The genotype combinations of the five GP-associated SNPs also showed significant effect on other meat quality traits. Discussion: These results not only provide insights into the genetic architecture of GP related traits in Erhualian, but also are useful for pig breeding programs involving this breed.
RESUMEN
High catalytic efficiency and long-term stability are two main components for the performance assessment of an electrocatalyst. Previous attention has been paid more to efficiency other than stability. The present work is focused on the study of the stability processed on the FeCoNiRu high-entropy alloy (HEA) in correlation with its catalytic efficiency. This catalyst has demonstrated not only performing the simultaneous hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) with high efficiency but also sustaining long-term stability upon HER and OER. The study reveals that the outstanding stability is attributed to the spinel oxide surface layer developed during evolution reactions. The spinel structure preserves the active sites that are inherited from the HEA's intrinsic structure. This work will provide an insightful direction/pathway for the design and manufacturing activities of other metallic electrocatalysts and a benchmark for the assessment of their efficiency-stability relationship.
RESUMEN
MicroRNAs (miRNAs) are key regulators of myocyte development and traits, yet insight into the genetic basis of variation in miRNA expression is still limited. Here, we present a systematic analysis of expression quantitative trait loci (eQTL) for miRNA profiling in longissimus muscle of pigs from an eight-breed crossed heterogeneous population. By integrating the whole-genome sequencing and miRNAomics data, we map 54 cis- and 292 trans-eQTLs at high resolution that are associated with the expression of 54 and 92 miRNAs, respectively. Twenty-three trans-acting loci are identified to affect the expression of nine myomiRs (known muscle-specific miRNAs). MiRNAs in mammalian conserved miRNA clusters are found to be subjected to regulation by shared cis-eQTLs, while the expression of mature miRNA-5p/-3p counterparts is more likely to be regulated by different cis-eQTLs. Fine mapping and bioinformatics analyses pinpoint the peak cis-eSNP of miR-4331-5p, rs344650810, which is located in its seed region, as a causal variant for the changes in expression and function of this miRNA. Additionally, rs344650810 is significantly (P < 0.01) correlated with the density and percentage of type I muscle fibers. Altogether, this study provides a comprehensive atlas of miRNA-eQTLs in porcine skeletal muscle and new insights into regulatory mechanisms of miRNA expression.
Asunto(s)
MicroARNs , Porcinos/genética , Animales , MicroARNs/genética , MicroARNs/metabolismo , Sitios de Carácter Cuantitativo/genética , Fitomejoramiento , Músculo Esquelético/metabolismo , Fenotipo , Perfilación de la Expresión Génica , Mamíferos/genética , Mamíferos/metabolismoRESUMEN
A dual-mode lab-on-paper device based on BiVO4/FeOOH nanocomposites as an efficient generating photoelectrochemical (PEC)/colorimetric signal reporter has been successfully constructed by integration of the lab-on-paper sensing platform and PEC/colorimetric detection technologies for sensitive detection of carcinoembryonic antigen (CEA). Concretely, the BiVO4/FeOOH nanocomposites were in situ synthesized onto the paper-working electrode (PWE) through hydrothermal synthesis of the BiVO4 layer on cellulose fibers (paper-based BiVO4) which were initially modified by Au nanoparticles for improving the conductivity of three dimensional PWE, and then the photo-electrodeposition of FeOOH onto the paper-based BiVO4 to construct the paper-based BiVO4/FeOOH for the portable dual-mode lab-on-paper device. The obtained nanocomposites with an FeOOH needle-like structure deposited on the BiVO4 layer exhibits enhanced PEC response activity due to its effective separation of the electron-hole pair which could further accelerate the PEC conversion efficiency during the sensing process. With the introduction of CEA targets onto the surface of nanocomposite-modified PWE assisted by the interaction with the CEA antibody from a specific recognition property, a signal-off PEC signal state with a remarkable photocurrent response decreasing trend can be achieved, realizing the quantitative detection of CEA with the PEC signal readout mode. By means of a smart origami paper folding, the colorimetric signal readout is achieved by catalyzing 3,3',5,5'-tetramethylbenzidine (TMB) to generate blue oxidized TMB in the presence of H2O2 due to the satisfied enzyme-like catalytic activity of the needle-like structure, FeOOH, thereby achieving the dual-mode signal readout system for the proposed lab-on-paper device. Under the optimal conditions, the PEC and colorimetric signals measurement were effectively carried out, and the corresponding linear ranges were 0.001-200 ng·mL-1 and 0.5-100 ng·mL-1 separately, with the limit of detection of 0.0008 and 0.013 ng·mL-1 for each dual-mode. The prepared lab-on-paper device also presented a successful application in serum samples for the detection of CEA, providing a potential pathway for the sensitive detection of target biomarkers in clinical application.
Asunto(s)
Técnicas Biosensibles , Nanopartículas del Metal , Nanocompuestos , Nanopartículas del Metal/química , Antígeno Carcinoembrionario , Oro/química , Peróxido de Hidrógeno , Colorimetría , Nanocompuestos/química , Técnicas Biosensibles/métodos , Técnicas Electroquímicas/métodos , Límite de DetecciónRESUMEN
Determining genetic correlations (GCs) between phenotypes that can be replicated across breeds or generations is important for animal breeding. A comprehensive and objective evaluation of this is dependent on enough variations in the studied phenotypes. To this end, we constructed a worldwide distributed eight-breeds crossbreed mosaic pig population and estimated the genetic and phenotypic correlations of muscle fiber characteristics (MFCs) with meat quality and eating quality traits using F6 and F7 generations (â¼590 samples/generation) of this population. The GCs of the density of type IIA fibers and type IIB fibers with the loin-eye area, a*, color score, firmness score, and those of the proportions of the two fiber types with pH24h and b* were moderate to high (|rg| ≥ 0.3) in both populations. We also obtained moderate to high GCs of mean fiber density with five sensory quality traits. Our results provide an important reference for improving meat quality through the genetic regulation of MFCs.
Asunto(s)
Macrodatos , Fibras Musculares Esqueléticas , Porcinos/genética , Animales , Fenotipo , Genotipo , CarneRESUMEN
Producing a desirable adsorbent with strong affinity adsorption sites, excellent selectivity properties, and the ability to easily separate solid from liquid for the removal of phenol to a permissible level remains a great challenge in wastewater treatment. Herein, an N-doped magnetic carbon skeleton is presented as a porous adsorbent matrix. Importantly, the pore volume and specific surface area of the adsorbent matrix can be meticulously tuned by adjusting the thermal treatment condition, while dispersing and immobilizing the N fraction. This would ultimately result in an N-rich matrix structure with flexible mass transfer channel. The imprinted modification generates a large number of phenol-shaped geometrical cavities on the matrix. This helps to activate the phenol recognition "awareness" of N-active sites and greatly endows the adsorbent with selective adsorption property. Due to the advantageous balance between the hierarchical porous adsorbent matrix with uniformly distributed N-active sites and the imprinted polymer, the adsorbent has a superior adsorption capacity of 995.2 mg g-1 and selective recognition (Kd = 3.92, 3.78; HQ, PTBP) towards phenol. It outperforms previously reported adsorbents. In addition, its easy magnetic separation property makes the adsorbent to have excellent reusability. The adsorbent presents a promising potential for separating pollutants from wastewater and it sheds light on the design of an efficient comprehensive adsorbent.
Asunto(s)
Fenol , Aguas Residuales , Carbono , Polímeros/química , Porosidad , Adsorción , Fenoles , Fenómenos MagnéticosRESUMEN
Nowadays, developing a cost-effective, easy-to-operate, and efficient signal amplification platform is of important to microfluidic paper-based analytical devices (µPAD) for end-use markets of point-of-care (POC) assay applications. Herein, an ultrasensitive, paper-based photoelectrochemical (PEC) bioassay platform is constructed by in situ grown ZnO/ZnIn2S4 heterojunctions onto paper fibers, which acted as photoactive signal amplification probes for enhancing the sensitivity of antibodies-based diagnostic assays, for the sensitive detection of alpha-fetoprotein (AFP) targets. The crystalline flake-like ZnIn2S4 composited with hexagonal nanorods (NRs) morphology of ZnO is an in situ grown, at the first time, onto cellulose fibers surface supported with Au nanoparticle (Au NP) modification to improve conductivity of the device working zone. The obtained composites on paper fibers are implemented as a flexible paper-based photoelectrode to realize remarkable performance of the fabricated µPAD, resulting from the enhanced PEC activity of heterojunctions with effective electron-hole pair separation for accelerating photoelectric conversion efficiency of the sensing process under light irradiation. Once the target AFP was introduced into the biosensing interface assistant, with a specific recognition interaction of AFP antibody, a drastically photocurrent response was generated, in view of the apparent steric effects. With the concentration increase of AFP targets, more immune conjugates could be confined onto the biosensing interface, eventually leading to the quantitative decrease of photocurrent intensity. Combined with an ingenious origami design and permitting the hydrophobic/hydrophilic conversion procedure in the bioassay process, the ultrasensitive PEC detection of AFP targets was realized. Under the optimized conditions, the level of AFP could be sensitively tracked by the prepared µPAD with a liner range from 0.1 to 100 ng mL-1 and limit of detection of 0.03 ng mL-1. This work provides a great potential application for highly selective and sensitive POC testing of AFP, and finally, developments for clinical disease diagnosis.
Asunto(s)
Técnicas Biosensibles , Nanopartículas del Metal , Óxido de Zinc , alfa-Fetoproteínas , Óxido de Zinc/química , Oro/química , Técnicas Electroquímicas/métodos , Técnicas Biosensibles/métodos , Inmunoensayo/métodos , Nanopartículas del Metal/química , Celulosa , Límite de DetecciónRESUMEN
Skeletal muscle fiber characteristics (MFCs) have been extensively studied due to their importance to human health and athletic ability, as well as to the quantity and quality of livestock meat production. Hence, we performed a genome-wide association study (GWAS) on nine muscle fiber traits by using whole genome sequence data in an eight-breed crossed heterogeneous stock pig population. This GWAS revealed 67 quantitative trait loci (QTLs) for these traits. The most significant GWAS signal was detected in the region of Sus scrofa chromosome 12 (SSC12) containing the MYH gene family. Notably, we identified a significant SNP rs322008693 (P = 7.52E-09) as the most likely causal mutation for the total number of muscle fibers (TNMF) QTL on SSC1. The results of EMSA and luciferase assays indicated that the rs322008693 SNP resided in a functional element. These findings provide valuable molecular markers for pig meat production selection as well as for deciphering the genetic mechanisms of the muscle fiber physiology.
Asunto(s)
Estudio de Asociación del Genoma Completo , Fibras Musculares Esqueléticas , Humanos , Animales , Porcinos/genética , Sitios de Carácter Cuantitativo , Carne/análisis , Fenotipo , Polimorfismo de Nucleótido Simple , Sus scrofa/genéticaRESUMEN
Developing low-cost and efficient oxygen evolution electrocatalysts is key to decarbonization. A facile, surfactant-free, and gram-level biomass-assisted fast heating and cooling synthesis method is reported for synthesizing a series of carbon-encapsulated dense and uniform FeNi nanoalloys with a single-phase face-centered-cubic solid-solution crystalline structure and an average particle size of sub-5 nm. This method also enables precise control of both size and composition. Electrochemical measurements show that among Fex Ni(1- x ) nanoalloys, Fe0.5 Ni0.5 has the best performance. Density functional theory calculations support the experimental findings and reveal that the optimally positioned d-band center of O-covered Fe0.5 Ni0.5 renders a half-filled antibonding state, resulting in moderate binding energies of key reaction intermediates. By increasing the total metal content from 25 to 60 wt%, the 60% Fe0.5 Ni0.5 /40% C shows an extraordinarily low overpotential of 219 mV at 10 mA cm-2 with a small Tafel slope of 23.2 mV dec-1 for the oxygen evolution reaction, which are much lower than most other FeNi-based electrocatalysts and even the state-of-the-art RuO2 . It also shows robust durability in an alkaline environment for at least 50 h. The gram-level fast heating and cooling synthesis method is extendable to a wide range of binary, ternary, quaternary nanoalloys, as well as quinary and denary high-entropy-alloy nanoparticles.
RESUMEN
Superlattices-a periodic stacking of two-dimensional layers of two or more materials-provide a versatile scheme for engineering materials with tailored properties1,2. Here we report an intrinsic heterodimensional superlattice consisting of alternating layers of two-dimensional vanadium disulfide (VS2) and a one-dimensional vanadium sulfide (VS) chain array, deposited directly by chemical vapour deposition. This unique superlattice features an unconventional 1T stacking with a monoclinic unit cell of VS2/VS layers identified by scanning transmission electron microscopy. An unexpected Hall effect, persisting up to 380 kelvin, is observed when the magnetic field is in-plane, a condition under which the Hall effect usually vanishes. The observation of this effect is supported by theoretical calculations, and can be attributed to an unconventional anomalous Hall effect owing to an out-of-plane Berry curvature induced by an in-plane magnetic field, which is related to the one-dimensional VS chain. Our work expands the conventional understanding of superlattices and will stimulate the synthesis of more extraordinary superstructures.