Tissue-Mimetic Supramolecular Polymer Networks for Bioelectronics.

Addressing the mechanical mismatch between biological tissue and traditional electronic materials remains a major challenge in bioelectronics. While rigidity of such materials limits biocompatibility, supramolecular polymer networks can harmoniously interface with biological tissues as they are soft, wet, and stretchable. Here, an electrically conductive supramolecular polymer network that simultaneously exhibits both electronic and ionic conductivity while maintaining tissue-mimetic mechanical properties, providing an ideal electronic interface with the human body, is introduced. Rational design of an ultrahigh affinity host-guest ternary complex led to binding affinities (>1013  M-2 ) of over an order of magnitude greater than previous reports. Embedding these complexes as dynamic cross-links, coupled with in situ synthesis of a conducting polymer, resulted in electrically conductive supramolecular polymer networks with tissue-mimetic Young's moduli (<5 kPa), high stretchability (>500%), rapid self-recovery and high water content (>84%). Achieving such properties enabled fabrication of intrinsically-stretchable stand-alone bioelectrodes, capable of accurately monitoring electromyography signals, free from any rigid materials.

Closed-loop chemical recycling of cross-linked polymeric materials based on reversible amidation chemistry.

Closed-loop chemical recycling provides a solution to the end-of-use problem of synthetic polymers. However, it remains a major challenge to design dynamic bonds, capable of effective bonding and reversible cleaving, for preparing chemically recyclable cross-linked polymers. Herein, we report a dynamic maleic acid tertiary amide bond based upon reversible amidation reaction between maleic anhydrides and secondary amines. This dynamic bond allows for the construction of polymer networks with tailorable and robust mechanical properties, covering strong elastomers with a tensile strength of 22.3 MPa and rigid plastics with a yield strength of 38.3 MPa. Impressively, these robust polymeric materials can be completely depolymerized in an acidic aqueous solution at ambient temperature, leading to efficient monomer recovery with >94% separation yields. Meanwhile, the recovered monomers can be used to remanufacture cross-linked polymeric materials without losing their original mechanical performance. This work unveils a general approach to design polymer networks with tunable mechanical performance and closed-loop recyclability, which will open a new avenue for sustainable polymeric materials.

Supramolecular encapsulation of redox-active monomers to enable free-radical polymerisation.

Extended polymeric structures based on redox-active species are of great interest in emerging technologies related to energy conversion and storage. However, redox-active monomers tend to inhibit radical polymerisation processes and hence, increase polydispersity and reduce the average molecular weight of the resultant polymers. Here, we demonstrate that styrenic viologens, which do not undergo radical polymerisation effectively on their own, can be readily copolymerised in the presence of cucurbit[n]uril (CB[n]) macrocycles. The presented strategy relies on pre-encapsulation of the viologen monomers within the molecular cavities of the CB[n] macrocycle. Upon polymerisation, the molecular weight of the resultant polymer was found to be an order of magnitude higher and the polydispersity reduced 5-fold. The mechanism responsible for this enhancement was unveiled through comprehensive spectroscopic and electrochemical studies. A combination of solubilisation/stabilisation of reduced viologen species as well as protection of the parent viologens against reduction gives rise to the higher molar masses and reduced polydispersities. The presented study highlights the potential of CB[n]-based host-guest chemistry to control both the redox behavior of monomers as well as the kinetics of their radical polymerisation, which will open up new opportunities across myriad fields.

On-Resin Recognition of Aromatic Oligopeptides and Proteins through Host-Enhanced Heterodimerization.

Peptide dimerization is ubiquitous in natural protein conjugates and artificial self-assemblies. A major challenge in artificial systems remains achieving quantitative peptide heterodimerization, critical for next-generation biomolecular purification and formulation of therapeutics. Here, we employ a synthetic host to simultaneously encapsulate an aromatic and a noncanonical l-perfluorophenylalanine-containing peptide through embedded polar-π interactions, constructing an unprecedented series of heteropeptide dimers. To demonstrate the utility, this heteropeptide dimerization strategy was applied toward on-resin recognition of N-terminal aromatic residues in peptides as well as insulin, both exhibiting high recycling efficiency (>95%). This research unveils a generic approach to exploit quantitative heteropeptide dimers for the design of supramolecular (bio)systems.

Hierarchical Self-Assembly of Adhesive and Conductive Gels with Anion-Coordinated Triple Helicate Junctions.

The fabrication of anion-coordinated assemblies into functional soft materials remains a major challenge. To this end, four C2 -symmetric anion-binding ligands equipped with ortho-phenylene-bridged bis(urea) and amine or amide ends were designed, which generated A2 L3 triple helical architectures upon self-assembly with phosphate ions. Hierarchical intermolecular hydrogen bonds among the terminal amine/amide groups and urea moieties resulted in the formation of functional gels. The obtained gels were further applied for conductive adhesion between different surfaces, displaying excellent flexibility and selective wettability. The viscoelastic gels constructed from anion-coordinated assemblies described in this work represent the first example of a new class of anion-coordination-driven smart materials.

An ultralow-acceptor-content supramolecular light-harvesting system for white-light emission.

White-light emission in donor-acceptor systems usually requires relatively high acceptor content and/or multiple acceptors to "neutralize" the primary color of donors. Herein, a cyanostilbene-bridged ditopic ureidopyrimidinone donor (CSU) was designed and synthesized, which can self-assemble into dispersed nanoparticles in water. Fascinatingly, efficient white-light emission can be realized by co-assembling 0.1% DBT into the nanoparticles through a light-harvesting strategy. This new system is further demonstrated for use in white-light encryption materials.

Highly compressible glass-like supramolecular polymer networks.

Supramolecular polymer networks are non-covalently crosslinked soft materials that exhibit unique mechanical features such as self-healing, high toughness and stretchability. Previous studies have focused on optimizing such properties using fast-dissociative crosslinks (that is, for an aqueous system, dissociation rate constant kd > 10 s-1). Herein, we describe non-covalent crosslinkers with slow, tuneable dissociation kinetics (kd < 1 s-1) that enable high compressibility to supramolecular polymer networks. The resultant glass-like supramolecular networks have compressive strengths up to 100 MPa with no fracture, even when compressed at 93% strain over 12 cycles of compression and relaxation. Notably, these networks show a fast, room-temperature self-recovery (< 120 s), which may be useful for the design of high-performance soft materials. Retarding the dissociation kinetics of non-covalent crosslinks through structural control enables access of such glass-like supramolecular materials, holding substantial promise in applications including soft robotics, tissue engineering and wearable bioelectronics.

Imidazolium-modification enhances photocatalytic CO2 reduction on ZnSe quantum dots.

Colloidal photocatalysts can utilize solar light for the conversion of CO2 to carbon-based fuels, but controlling the product selectivity for CO2 reduction remains challenging, in particular in aqueous solution. Here, we present an organic surface modification strategy to tune the product selectivity of colloidal ZnSe quantum dots (QDs) towards photocatalytic CO2 reduction even in the absence of transition metal co-catalysts. Besides H2, imidazolium-modified ZnSe QDs evolve up to 2.4 mmolCO gZnSe -1 (TONQD > 370) after 10 h of visible light irradiation (AM 1.5G, λ > 400 nm) in aqueous ascorbate solution with a CO-selectivity of up to 20%. This represents a four-fold increase in CO-formation yield and 13-fold increase in CO-selectivity compared to non-functionalized ZnSe QDs. The binding of the thiolated imidazolium ligand to the QD surface is characterized quantitatively using 1H-NMR spectroscopy and isothermal titration calorimetry, revealing that a subset of 12 to 17 ligands interacts strongly with the QDs. Transient absorption spectroscopy reveals an influence of the ligand on the intrinsic charge carrier dynamics through passivating Zn surface sites. Density functional theory calculations indicate that the imidazolium capping ligand plays a key role in stabilizing the surface-bound *CO2 - intermediate, increasing the yield and selectivity toward CO production. Overall, this work unveils a powerful tool of using organic capping ligands to modify the chemical environment on colloids, thus enabling control over the product selectivity within photocatalyzed CO2 reduction.

Quantitative Supramolecular Heterodimerization for Efficient Energy Transfer.

The challenge of quantitatively forming self-assembled heterodimers without other equilibrium by-products is overcome through self-sorting favored by the introduction of designed shape-complementary moieties. Such a supramolecular strategy based on cucurbit[8]uril-directed dimerization is further applied to generate hetero-chromophore dimers quantitatively, leading to efficient energy transfer (>85 %) upon photoexcitation.

Host-Enhanced Phenyl-Perfluorophenyl Polar-π Interactions.

Phenyl-perfluorophenyl polar-π interactions have been revisited for the design and fabrication of functional supramolecular systems. The relatively weak associative interactions (ΔG ≈ -1.0 kcal/mol) have limited their use in aqueous self-assembly to date. Herein, we propose a strategy to strengthen phenyl-perfluorophenyl polar-π interactions by encapsulation within a synthetic host, thus increasing the binding affinity to ΔG= -15.5 kcal/mol upon formation of heteroternary complexes through social self-sorting. These heteroternary complexes were used as dynamic, yet strong, cross-linkers in the fabrication of supramolecular gels, which exhibited excellent viscoelasticity, stretchability, self-recovery, self-healing, and energy dissipation. This work unveils a general approach to exploit host-enhanced polar-π interactions in the design of robust aqueous supramolecular systems.

Unprecedented Halide-Ion Binding and Catalytic Activity of Nanoscale Anionic Metal Oxide Clusters.

One halide ion (X- ) can bind on the surface of nanoscale Anderson-type polyoxometalate (POMs) clusters [(n-C4 H9 )4 N]3 {AlMo6 O18 (OH)3 [(OCH2 )3 CCH3 ]}, and form stable complexes in solution with binding constant K=1.53×103 . Single-crystal structural analysis showed that this binding behavior occurs through multiple hydrogen bonding between X- and three hydroxy groups on the uncapped side of the cluster. This supramolecular interaction in the cluster systems means that their catalytic activities, evaluated from the oxidation of alcohols to aldehydes, can be switched upon the introduction of halide ions and water molecules. The halide ions work as inhibitors by blocking the active sites of the clusters while they can be re-activated by the addition of water.

Supramolecular Emulsion Interfacial Polymerization.

A new method of supramolecular emulsion interfacial polymerization is developed, which can be used to fabricate supramolecular polymeric nanospheres. We designed a water-soluble monomer containing two maleimide end groups, acting as both building block and surfactant, and an oil-soluble supramonomer bearing two thiol groups connected by quadruple hydrogen bonds. With the assist of ultrasonication, hollow nanospheres can be controllably prepared by thiol-maleimide reaction of two monomers at the emulsion interface, which exhibit good stability and dynamic property. In addition, the encapsulated guest molecules could be controllably released from the supramolecular polymeric nanospheres, owing to their stimuli-responsiveness. It is anticipated that this approach will enrich the methodology of supramolecular polymerization and can be applied to constructing supramolecular materials with controllable structures and functions.

pH-Induced Charge-Reversal Amphiphile with Cancer Cell-Selective Membrane-Disrupting Activity.

A charge-reversal amphiphile exhibiting charge conversion from negative to positive induced by pH is reported. It selectively kills cancer cells through cell membrane disruption. This amphiphile comprising an alkyl chain and anionic headgroup of acid-labile ß-carboxylic amide (C16N-DCA) was prepared. In the microenvironment of normal cells with pH 7.4, the negatively charged C16N-DCA exhibited considerably reduced cytotoxicity. However, in the acidic microenvironment of cancer cells with pH 6.5-6.8, the headgroup charge of C16N-DCA changed from negative to positive under hydrolysis of the acid-labile amide group. As a result, the generated cationic amphiphile displayed significant killing of cancer cells by disrupting their cell membranes. Such pH-selective cell killing bioactivity represents a new route of chemotherapy for anticancer strategies.

Supramolecularly Catalyzed Polymerization: From Consecutive Dimerization to Polymerization.

Herein, we propose a new method for promoting covalent polymerization by supramolecular catalysts. To this end, we employed cucurbit[8]uril (CB[8]) as a supramolecular catalyst, and successfully prepared polyelectrolytes in an aqueous solution by taking advantage of the CB[8]-enhanced photodimerization of Brooker merocyanine moieties. Interestingly, 10 mol % CB[8] is enough to effectively catalyze this polymerization, because CB[8] can be spontaneously replaced by terminal groups from photodimerized products. In addition, the molecular weights of the obtained polyelectrolytes can be varied by the irradiation time or the monomer. By combining supramolecular catalysis and polymer chemistry, this line of research may enrich the methodology of polymerization and open up new horizons for supramolecular polymer chemistry.

Supramolecular Chemotherapy: Carboxylated Pillar[6]arene for Decreasing Cytotoxicity of Oxaliplatin to Normal Cells and Improving Its Anticancer Bioactivity Against Colorectal Cancer.

We have successfully demonstrated that the host-guest complex of carboxylated pillar[6]arene with oxaliplatin (OxPt) exhibits low cytotoxicity toward normal cells and displays higher anticancer bioactivity against colorectal cancer cells than OxPt itself. Owing to higher binding affinity of carboxylated pillar[6]arene with spermine (SPM) than that with OxPt, the encapsulated OxPt can be thoroughly released from its host-guest complex by the competitive replacement with SPM. This supramolecular chemotherapy works well both in vitro and in vivo for SPM-overexpressed cancers, such as colorectal cancer. Compared to OxPt itself, the anticancer bioactivity of this host-guest complex is further improved by about 20%. Such an improvement results from the combined effect of controlled release of OxPt from its host-guest complex and simultaneous consumption of SPM by carboxylated pillar[6]arene. It is anticipated that this supramolecular strategy may be extended to other clinical anticancer drugs for decreasing their severe side effects and improving their anticancer bioactivity, thus enriching the realm of supramolecular chemotherapy.

Supramolecular Polymerization Controlled through Kinetic Trapping.

A method of controllable supramolecular polymerization through kinetic trapping is developed. To this end, two bifunctional monomers with cucurbit[7]uril (CB[7]) and adamantane end groups were synthesized. The CB[7]-containing monomer was presaturated with a pH-responsive competitive guest for kinetic control. Then, the kinetics of supramolecular polymerization of the two monomers was easily controlled through the modulation of pH. As a result, supramolecular polymerization was kinetically trapped at certain stages, and supramolecular polymers with different molecular weights were obtained. It is anticipated that this research will enrich the methods of controllable supramolecular polymerization.

Buildup of Redox-Responsive Hybrid from Polyoxometalate and Redox-Active Conducting Oligomer: Its Self-Assemblies with Controllable Morphologies.

A redox-responsive hybrid of polyoxometalate and conducting oligomer including its self-assemblies with controllable morphologies are reported. To this end, a hybrid molecule, containing a Lindqvist hexamolybdate as the polar head group and N,N'-bis(4'-amino-2,6-dimethylphenyl)-1,4-quinonediimine as the redox-responsive and aggregating group, is prepared. This hybrid exhibits redox-responsive behavior with controllable assembling morphological transition from spherical vesicles to short cylindrical vesicles. Besides, the hybrid-based self-assemblies are transferred to the surface, thus the surface wettability can be well-tuned owing to the morphological transitions of the self-assemblies. By marrying conducting materials with polyoxometalate chemistry, this research opens a new horizon of polyoxometalate-based self-assembled systems with potential applications in functional materials.

Supramolecular Polymerization from Controllable Fabrication to Living Polymerization.

Supramolecular polymers have attracted plenty of interest in the scientific community; however, developing controllable methods of supramolecular polymerization remains a serious challenge. This article reviews some recent developments of methods for supramolecular polymerization from controllable fabrication to living polymerization. Three facile methods with general applicability for controllable fabrication of supramolecular polymers have been established recently: the first method is a self-sorting approach by manipulating ring-chain equilibrium based on noncovalent control over rigidity of monomers; the second is covalent polymerization from supramonomers formed by noncovalent interactions; and the third is supramolecular interfacial polymerization. More excitingly, living supramolecular polymerization has been achieved by two elegant strategies, including seeded supramolecular polymerization under pathway complexity control and chain-growth supramolecular polymerization by metastable monomers. It is anticipated that this review may provide some guidance for precise fabrication of supramolecular polymers, leading to the construction of supramolecular polymeric materials with controllable architectures and functions.

Supramolecular Interfacial Polymerization: A Controllable Method of Fabricating Supramolecular Polymeric Materials.

A new method of supramolecular polymerization at the water-oil interface is developed. As a demonstration, an oil-soluble supramonomer containing two thiol end groups linked by two ureidopyrimidinone units and a water-soluble monomer bearing two maleimide end groups are employed. Supramolecular interfacial polymerization can be implemented by a thiol-maleimide click reaction at the water-chloroform interface to obtain supramolecular polymeric films. The glass transition temperature of such supramolecular polymers can be well-tuned by simply changing the polymerization time and temperature. It is highly anticipated that this work will provide a facile and general approach to realize control over supramolecular polymerization by transferring the preparation of supramolecular polymers from solutions to water-oil interfaces and construct supramolecular materials with well-defined properties.