RESUMEN
The advancement in electrocatalysis, particularly in the development of efficient catalysts for hydrogen and oxygen evolution reactions (HER and OER), is crucial for sustainable energy generation through processes like overall water splitting. A notable bifunctional electrocatalyst, CoFe2O4/Co7Fe3, has been engineered to facilitate both OER and HER concurrently, aiming to reduce overpotentials. In the pursuit of further enhancing catalytic efficiency, a morphological transformation has been achieved by introducing a sulphur source and multi-walled carbon nanotubes (MWCNTs) into the catalyst system, resulting in S-CoFe2O4/Co7Fe3/MWCNTs. This modification has significantly improved the activity for both OER and HER. An onset overpotential of 250 mV@10 mAcm-2 for the OER and 270 mV@50 mAcm-2 for the HER, indicating efficient catalytic activity at relatively low overpotentials. S-CoFe2O4/Co7Fe3/MWCNTs display an outstanding long-term stability in alkaline electrolytes, with minimal Tafel slopes of 77 mV/dec for the OER and 70 mV/dec for the HER, suggesting sustained catalytic performance over extended periods. Furthermore, when employed as both the cathode and anode in the context of complete water splitting, S-CoFe2O4/Co7Fe3/MWCNTs demonstrate an impressive cell voltage of 1.52 V at a current density of 10 mA cm-2 in a 1 M KOH solution, showcasing its viability for practical applications. Given its cost-effectiveness and superior activity, S-CoFe2O4/Co7Fe3/MWCNTs hold significant promise for widespread applications in overall water splitting electrocatalysis, contributing to the advancement of cleaner and sustainable fuel generation technologies.
RESUMEN
Triggering the lattice oxygen oxidation mechanism is crucial for improving oxygen evolution reaction (OER) performance, because it could bypass the scaling relation limitation associated with the conventional adsorbate evolution mechanism through the direct formation of oxygen-oxygen bond. High-valence transition metal sites are favorable for activating the lattice oxygen, but the deep oxidation of pre-catalysts suffers from a high thermodynamic barrier. Here, taking advantage of the Jahn-Teller (J-T) distortion induced structural instability, we incorporate high-spin Mn3+ ( t 2 g 3 e g 1 ${{t}_{2g}^{3}{e}_{g}^{1}}$ ) dopant into Co4N. Mn dopants enable a surface structural transformation from Co4N to CoOOH, and finally to CoO2, as observed by various in situ spectroscopic investigations. Furthermore, the reconstructed surface on Mn-doped Co4N triggers the lattice oxygen activation, as evidenced experimentally by pH-dependent OER, tetramethylammonium cation adsorption and online electrochemical mass spectrometry measurements of 18O-labelled catalysts. In general, this work not only offers the introducing J-T effect approach to regulate the structural transition, but also provides an understanding about the influence of the catalyst's electronic configuration on determining the reaction route, which may inspire the design of more efficient catalysts with activated lattice oxygen.
RESUMEN
Single-site Fe-N-C catalysts are the most promising Pt-group catalyst alternatives for the oxygen reduction reaction, but their application is impeded by their relatively low activity and unsatisfactory stability as well as production costs. Here, cobalt atoms are introduced into an Fe-N-C catalyst to enhance its catalytic activity by utilizing the synergistic effect between Fe and Co atoms. Meanwhile, phenanthroline is employed as the ligand, which favours stable pyridinic N-coordinated Fe-Co sites. The obtained catalysts exhibit excellent ORR performance with a half-wave potential of 0.892 V and good stability under alkaline conditions. In addition, the excellent ORR activity and durability of FeCo-N-C enabled the constructed zinc-air battery to exhibit a high power density of 247.93 mW cm-2 and a high capacity of 768.59 mA h gZn-1. Moreover, the AEMFC based on FeCo-N-C also achieved a high open circuit voltage (0.95 V) and rated power density (444.7 mW cm-2), surpassing those of many currently reported transition metal-based cathodes. This work emphasizes the feasibility of this non-precious metal catalyst preparation strategy and its practical applicability in fuel cells and metal-air batteries.
RESUMEN
Dual-atom site catalysts (DASCs) have sparked considerable interest in heterogeneous photocatalysis as they possess the advantages of excellent photoelectronic activity, photostability, and high carrier separation efficiency and mobility. The DASCs involved in these important photocatalytic processes, especially in the photocatalytic hydrogen evolution reaction (HER), CO2 reduction reaction (CO2RR), N2/nitrate reduction, etc., have been extensively investigated in the past few years. In this review, we highlight the recent progress in DASCs that provides fundamental insights into the photocatalytic conversion of small molecules. The controllable preparation and characterization methods of various DASCs are discussed. Subsequently, the reaction mechanisms of the formation of several important molecules (hydrogen, hydrocarbons and ammonia) on DASCs are introduced in detail, in order to probe the relationship between DASCs's structure and photocatalytic activity. Finally, some challenges and outlooks of DASCs in the photocatalytic conversion of small molecules are summarized and prospected. We hope that this review can provide guidance for in-depth understanding and aid in the design of efficient DASCs for photocatalysis.
RESUMEN
Ambient electrocatalytic nitrogen (N2 ) reduction has gained significant recognition as a potential substitute for producing ammonia (NH3 ). However, N2 adsorption and *NN protonation for N2 activation reaction with the competing hydrogen evolution reaction remain a daunting challenge. Herein, a defect-rich TiO2 nanosheet electrocatalyst with PdCu alloy nanoparticles (PdCu/TiO2-x ) is designed to elucidate the reactivity and selectivity trends of N2 cleavage path for N2 -to-NH3 catalytic conversion. The introduction of oxygen vacancy (OV) not only acts as active sites but also effectively promotes the electron transfer from Pd-Cu sites to high-concentration Ti3+ sites, and thus lends to the N2 activation via electron donation of PdCu. OVs-mediated control effectively lowers the reaction barrier of *N2 H and *H adsorption and facilitates the first hydrogenation process of N2 activation. Consequently, PdCu/TiO2-x catalyst attains a high rate of NH3 evolution, reaching 5.0 mmol gcat. -1 h-1 . This work paves a pathway of defect-engineering metal-supported electrocatalysts for high-efficient ammonia electrosynthesis.
RESUMEN
The development of highly active and low-cost oxygen reduction reaction (ORR) catalysts is crucial for the practical application of hydrogen fuel cells. However, the linear scaling relation (LSR) imposes an inherent Sabatier's limitation for most catalysts including the benchmark Pt with an insurmountable overpotential ceiling, impeding the development of efficient electrocatalysts. To avoid such a limitation, using earth-abundant metal oxides with different crystal phases as model materials, we propose an effective and dynamic reaction pathway through constructing spatially correlated Pt-Mn pair sites, achieving an excellent balance between high activity and low Pt loading. Experimental and theoretical calculations demonstrate that manipulating the intermetallic distance and charge distribution of Pt-Mn pairs can effectively promote O-O bond cleavage at these sites through a bridge configuration, circumventing the formation of *OOH intermediates. Meanwhile, the dynamic adsorption configuration transition from the bridge configuration of O2 to the end-on configuration of *OH improves *OH desorption at the Mn site within such pairs, thereby avoiding Sabatier's limitation. The well-designed Pt-Mn/ß-MnO2 exhibits outstanding ORR activity and stability with a half-wave potential of 0.93 V and barely any activity degradation for 70 h. When applied to the cathode of a H2-O2 anion-exchange membrane fuel cell, this catalyst demonstrates a high peak power density of 287 mW cm-2 and 500 h of stability under a cell voltage of 0.6 V. This work reveals the adaptive bonding interactions of atomic pair sites with multiple reactant/intermediates, offering a new avenue for rational design of highly efficient atomic-level dispersed ORR catalysts beyond the Sabatier optimum.
RESUMEN
The development of efficient and economical electrocatalysts for oxygen evolution reaction (OER) is of paramount importance for the sustainable production of renewable fuels and energy storage systems; however, the sluggish OER kinetics involving multistep four proton-coupled electron transfer hampers progress in these systems. Fortunately, surface reconstruction offers promising potential to improve OER catalyst design. Anion modulation plays a crucial role in controlling the extent of surface reconstruction and positively persuading the reconstructed species' performances. This review starts by providing a general explanation of how various types of anions can trigger dynamic surface reconstruction and create different combinations with pre-catalysts. Next, the influences of anion modulation on manipulating the surface dynamic reconstruction process are discussed based on the in situ advanced characterization techniques. Furthermore, various effects of survived anionic groups in reconstructed species on water oxidation activity are further discussed. Finally, the challenges and prospects for the future development directions of anion modulation for redirecting dynamic surface reconstruction to construct highly efficient and practical catalysts for water oxidation are proposed.
RESUMEN
Surface reconstruction generates real active species in electrochemical conditions; rational regulating reconstruction in a targeted manner is the key for constructing highly active catalyst. Herein, we use the high-valence Mo modulated orthorhombic Pr3Ir1-xMoxO7 as model to activate lattice oxygen and cations, achieving directional and accelerated surface reconstruction to produce self-terminated IrâObriâMo (Obri represents the bridge oxygen) active species that is highly active for acidic water oxidation. The doped Mo not only contributes to accelerated surface reconstruction due to optimized IrâO covalency and more prone dissolution of Pr, but also affords the improved durability resulted from Mo-buffered charge compensation, thereby preventing fierce Ir dissolution and excessive lattice oxygen loss. As such, IrâObriâMo species could be directionally generated, in which the strong Brønsted acidity of Obri induced by remaining Mo assists with the facilitated deprotonation of oxo intermediates, following bridging-oxygen-assisted deprotonation pathway. Consequently, the optimal catalyst exhibits the best activity with an overpotential of 259 mV to reach 10 mA cmgeo-2, 50 mV lower than undoped counterpart, and shows improved stability for over 200 h. This work provides a strategy of directional surface reconstruction to constructing strong Brønsted acid sites in IrOx species, demonstrating the perspective of targeted electrocatalyst fabrication under in situ realistic reaction conditions.
RESUMEN
The spin degree of freedom is an important and intrinsic parameter in boosting carrier dynamics and surface reaction kinetics of photocatalysis. Here we show that chiral structure in ZnO can induce spin selectivity effect to promote photocatalytic performance. The ZnO crystals synthesized using chiral methionine molecules as symmetry-breaking agents show hierarchical chirality. Magnetic circular dichroism spectroscopic and magnetic conductive-probe atomic force microscopic measurements demonstrate that chiral structure acts as spin filters and induces spin polarization in photoinduced carriers. The polarized carriers not only possess the prolonged carrier lifetime, but also increase the triplet species instead of singlet byproducts during reaction. Accordingly, the left- and right-hand chiral ZnO exhibit 2.0- and 1.9-times higher activity in photocatalytic O2 production and 2.5- and 2.0-times higher activities in contaminant photodegradation, respectively, compared with achiral ZnO. This work provides a feasible strategy to manipulate the spin properties in metal oxides for electron spin-related redox catalysis.
RESUMEN
The oxygen evolution reaction (OER) severely limits the efficiency of proton exchange membrane (PEM) electrolyzers due to slow reaction kinetics. IrO2 is currently a commonly used anode catalyst, but its large-scale application is limited due to its high price and scarce reserves. Herein, we reported a practical strategy to construct an acid OER catalyst where Iridium oxide loading and iridium element bulk doping are realized on the surface and inside of W18O49 nanowires by immersion adsorption, respectively. Specifically, W0.7Ir0.3Oy has an overpotential of 278 mV at 10 mA·cm-2 in 0.1 M HClO4. The mass activity of 714.10 A·gIr-1 at 1.53 V vs. the reversible hydrogen electrode (RHE) is 80 times that of IrO2, and it can run stably for 55 h. In the PEM water electrolyzer device, its mass activity reaches 3563.63 A·gIr-1 at the cell voltage of 2.0 V. This improved catalytic performance is attributed to the following aspects: (1) The electron transport between iridium and tungsten effectively improves the electronic structure of the catalyst; (2) the introduction of iridium into W18O49 by means of elemental bulk doping and nanoparticles supporting for the enhanced conductivity and electrochemically active surface area of the catalyst, resulting in extensive exposure of active sites and increased intrinsic activity; and (3) during the OER process, partial iridium elements in the bulk phase are precipitated, and iridium oxide is formed on the surface to maintain stable activity. This work provides a new idea for designing oxygen evolution catalysts with low iridium content for practical application in PEM electrolyzers.
RESUMEN
Dynamic reconstruction of catalyst active sites is particularly important for metal oxide-catalyzed oxygen evolution reaction (OER). However, the mechanism of how vacancy-induced reconstruction aids OER remains ambiguous. Here, we use Co3O4 with Co or O vacancies to uncover the effects of different defects in the reconstruction process and the active motifs relevant to alkaline OER. Combining in situ characterization and theoretical calculations, we found that cobalt oxides are converted to an amorphous [Co(OH)6] intermediate state, and then the mismatched rates of *OH adsorption and deprotonation lead to irreversible catalyst reconstruction. The stronger *OH adsorption but weaker deprotonation induced by O defects provides the driving force for reconstruction, while Co defects favor dehydrogenation and reduce the reconstruction rate. Importantly, both O and Co defects trigger highly OER-active bridge Co sites in reconstructed catalysts, of which Co defects induce a short Co-Co distance (3.38 Å) under compressive lattice stress and show the best OER activity (η10 of 262 mV), superior to reconstructed oxygen-defected Co3O4-VO (η10 of 300 mV) and defect-free Co3O4 (η10 of 320 mV). This work highlights that engineering defect-dependent reconstruction may provide a rational route for electrocatalyst design in energy-related applications.
RESUMEN
The conversion of biomass is a favorable alternative to the fossil energy route to solve the energy crisis and environmental pollution. As one of the most versatile platform compounds, 5-hydroxymethylfural (HMF) can be transformed to various value-added chemicals via electrolysis combining with renewable energy. Here, the recent advances in electrochemical oxidation of HMF, from reaction mechanism to reactor design are reviewed. First, the reaction mechanism and pathway are summarized systematically. Second, the parameters easy to be ignored are emphasized and discussed. Then, the electrocatalysts are reviewed comprehensively for different products and the reactors are introduced. Finally, future efforts on exploring reaction mechanism, electrocatalysts, and reactor are prospected. This review provides a deeper understanding of mechanism for electrochemical oxidation of HMF, the design of electrocatalyst and reactor, which is expected to promote the economical and efficient electrochemical conversion of biomass for industrial applications.
RESUMEN
The excessive dependence on fossil fuels contributes to the majority of CO2 emissions, influencing on the climate change. One promising alternative to fossil fuels is green hydrogen, which can be produced through water electrolysis from renewable electricity. However, the variety and complexity of hydrogen evolution electrocatalysts currently studied increases the difficulty in the integration of catalytic theory, catalyst design and preparation, and characterization methods. Herein, this review first highlights design principles for hydrogen evolution reaction (HER) electrocatalysts, presenting the thermodynamics, kinetics, and related electronic and structural descriptors for HER. Second, the reasonable design, preparation, mechanistic understanding, and performance enhancement of electrocatalysts are deeply discussed based on intrinsic and extrinsic effects. Third, recent advancements in the electrocatalytic water splitting technology are further discussed briefly. Finally, the challenges and perspectives of the development of highly efficient hydrogen evolution electrocatalysts for water splitting are proposed.
RESUMEN
Natural water-soluble Monascus pigments (WSMPs) have been in increasing demand but have not been able to achieve industrial production due to the low production rate. This study aimed to improve the biosynthesis and secretion of extracellular yellow pigments (EYPs) through submerged fermentation with Monascus ruber CGMCC 10,910 supplemented with sodium starch octenyl succinate (OSA-SNa). The results demonstrated that the yield was 69.68% and 48.89% higher than that without OSA-SNa in conventional fermentation (CF) and extractive fermentation (EF), respectively. The mainly increased EYP components were Y3 and Y4 in CF, but they were mainly Y1 and Y2 as well as secreted intracellular pigments, including Y5, Y6, O1, and O2, in EF. Scanning electron microscopy analysis revealed that the mycelium presented an uneven surface profile with obvious wrinkles and small fragments with OSA-SNa. It was found that a higher unsaturated/saturated fatty acids ratio in the cell membrane resulted in increased permeability and facilitated the export of intracellular yellow pigments into the broth with OSA-SNa treatment. In addition, a higher NAD+/NADH ratio and glucose-6-phosphate dehydrogenase activity provided a reducing condition for yellow pigment biosynthesis. Gene expression analysis showed that the expression levels of the key genes for yellow pigment biosynthesis were significantly upregulated by OSA-SNa. This study provides an effective strategy to promote the production of WSMPs by microparticle-enhanced cultivation using OSA-SNa. KEY POINTS: ⢠OSA-SNa addition facilitated the production of Monascus yellow pigments. ⢠Mycelial morphology and membrane permeability were affected by OSA-SNa. ⢠The key gene expression of yellow pigments was upregulated.
Asunto(s)
Monascus , Fermentación , Monascus/metabolismo , Pigmentos Biológicos/metabolismo , Sodio , Almidón , Succinatos , AguaRESUMEN
Developing efficient and low-cost electrocatalysts for oxygen evolution reaction is crucial in realizing practical energy systems for sustainable fuel production and energy storage from renewable energy sources. However, the inherent linear scaling relation for most catalytic materials imposes a theoretical overpotential ceiling, limiting the development of efficient electrocatalysts. Herein, using modeled NaxMn3O7 materials, we report an effective strategy to construct better oxygen evolution electrocatalyst through tuning both lattice oxygen reactivity and scaling relation via alkali metal ion mediation. Specifically, the number of Na+ is linked with lattice oxygen reactivity, which is determined by the number of oxygen hole in oxygen lone-pair states formed by native Mn vacancies, governing the barrier symmetry between O-H bond cleavage and O-O bond formation. On the other hand, the presence of Na+ could have specific noncovalent interaction with pendant oxygen in *OOH to overcome the limitation from linear scaling relation, reducing the overpotential ceiling. Combining in situ spectroscopy-based characterization with first-principles calculations, we demonstrate that an intermediate level of Na+ mediation (NaMn3O7) exhibits the optimum oxygen evolution activity. This work provides a new rational recipe to develop highly efficient catalyst towards water oxidation or other oxidative reactions through tuning lattice oxygen reactivity and scaling relation.
RESUMEN
Monascus pigments (MPs) are widely used natural colorants in Asian countries. The problems of low extracellular red pigment (ERP) and high citrinin remain to be solved in Monascus pigment production. The effect of lanthanum(III) ion (LaCl3) on Monascus purpureus fermentation was investigated in this study. The yields of ERP and biomass respectively reached maxima of 124.10 U/mL and 33.10 g/L by adding 0.4 g/L La3+ on the second day in the total 8-day fermentation; simultaneously, citrinin was decreased by 59.93% and 38.14% in the extracellular and intracellular fractions, respectively. Reactive oxygen species (ROS) levels were obviously improved by La3+ treatment, while the activities of catalase (CAT) and superoxide dismutase (SOD) were increased compared with the control. The ratio of unsaturated/saturated fatty acids in mycelia was increased from 2.94 to 3.49, indicating that the permeability and fluidity of the cell membrane were enhanced under La3+ treatment. Gene expression analysis showed that the relative expression levels of Monascus pigment synthesis genes (pksPT, mppB, mppD, MpFasB2, and MpPKS5) were significantly upregulated by La3+ treatment, and in contrast, the relative expression levels of citrinin synthesis genes (ctnA, pksCT and mppC) were markedly downregulated. This work confirmed that LaCl3 possesses the potential to induce red pigment biosynthesis and inhibit citrinin production in M. purpureus fermentation. KEY POINTS: ⢠La3+ induced red pigment and inhibited citrinin production in Monascus fermentation. ⢠La3+ regulated genes expression up for Monascus pigment and down for citrinin. ⢠La3+ increased the UFAs in cell membrane to enhance the permeability and fluidity.
Asunto(s)
Citrinina , Monascus , Asia , Fermentación , Lantano , Monascus/metabolismo , Pigmentos Biológicos/metabolismoRESUMEN
Mycelial adhesion affects cell growth and the production of water-soluble extracellular yellow pigment (EYP) in submerged fermentation with Monascus ruber CGMCC 10910. Two nitrates, NaNO3 and KNO3, were used as nitrogen sources for mitigating mycelial adhesion and improving the production of EYP in this study. The results showed that the adhesion of mycelia in the fermentation broth significantly decreased by adding 5 g/L NaNO3, which prevented mycelia from attaching to the inner wall of the Erlenmeyer flask. It was suggested that NaNO3 reduced the total amount of extracellular polysaccharides, increased extracellular proteins, and decreased the viscosity of the fermentation broth. Scanning electron microscopy (SEM) analysis revealed that the mycelial morphology was shorter and more dispersed and vigorous under NaNO3 conditions than under the control conditions. The biomass increased by 49.2% and 45.4% with 5 g/L NaNO3 and 6 g/L KNO3 treatment, respectively, compared with that of the control, and the maximum production of EYP was 267.1 and 241.8 AU350, which increased by 70.0% and 53.9% compared with that of the control, respectively. Simultaneously, the ratios of intracellular yellow pigment to orange pigment increased significantly with 5 g/L of NaNO3 addition (p < 0.05). Genetic analysis found that the expression levels of the key genes for Monascus pigment biosynthesis were significantly upregulated by NaNO3 addition (p < 0.05 or p < 0.01). This study provides an effective strategy for the production of water-soluble Monascus yellow pigments.Key Points⢠Nitrate addition decreased mycelial adhesion and improved cell growth in Monascus pigment fermentation.⢠The biosynthesis genes of water-soluble extracellular yellow pigment (EYP) were upregulated by nitrate addition.⢠The mycelial morphology was significantly influenced to enhance EYP biosynthesis with nitrate addition.
Asunto(s)
Monascus , Fermentación , Monascus/metabolismo , Nitratos , Pigmentación , Pigmentos Biológicos/metabolismoRESUMEN
Electricity-driven water splitting can facilitate the storage of electrical energy in the form of hydrogen gas. As a half-reaction of electricity-driven water splitting, the oxygen evolution reaction (OER) is the major bottleneck due to the sluggish kinetics of this four-electron transfer reaction. Developing low-cost and robust OER catalysts is critical to solving this efficiency problem in water splitting. The catalyst design has to be built based on the fundamental understanding of the OER mechanism and the origin of the reaction overpotential. In this article, we summarize the recent progress in understanding OER mechanisms, which include the conventional adsorbate evolution mechanism (AEM) and lattice-oxygen-mediated mechanism (LOM) from both theoretical and experimental aspects. We start with the discussion on the AEM and its linked scaling relations among various reaction intermediates. The strategies to reduce overpotential based on the AEM and its derived descriptors are then introduced. To further reduce the OER overpotential, it is necessary to break the scaling relation of HOO* and HO* intermediates in conventional AEM to go beyond the activity limitation of the volcano relationship. Strategies such as stabilization of HOO*, proton acceptor functionality, and switching the OER pathway to LOM are discussed. The remaining questions on the OER and related perspectives are also presented at the end.
RESUMEN
Electrochemical CO2 reduction relies on the availability of highly efficient and selective catalysts. Herein, we report a general strategy to boost the activity of metal-organic frameworks (MOFs) towards CO2 reduction via ligand doping. A strong electron-donating molecule of 1,10-phenanthroline was doped into Zn-based MOFs of zeolitic imidazolate framework-8 (ZIF-8) as CO2 reduction electrocatalyst. Experimental and theoretical evidences reveal that the electron-donating nature of phenanthroline enables a charge transfer, which induces adjacent active sites at the sp2 C atoms in the imidazole ligand possessing more electrons, and facilitates the generation of *COOH, hence leading to improved activity and Faradaic efficiency towards CO production.
RESUMEN
Cordyceps militaris is a crude dietary therapeutic mushroom with high nutritional and medicinal values. Mushroom-derived polysaccharides have been found to possess antihyperglycemic and antihyperlipidemic activities. This study aimed to partially clarify the structural characterization and comparatively evaluate hypolipidemic potentials of intracellular- (IPCM) and extracellular polysaccharides of C. militaris (EPCM) in high fat diet fed mice. Results indicated that IPCM-2 is α-pyran polysaccharide with an average molecular weight of 32.5 kDa, was mainly composed of mannose, glucose and galactose with mass percentages of 51.94%, 10.54%, and 37.25%, respectively. EPCM-2 is an α-pyran polysaccharide with an average molecular weight of 20 kDa that is mainly composed of mannose, glucose and galactose with mass percentages of 44.51%, 18.33%, and 35.38%, respectively. In in vivo study, EPCM-1 treatment (100 mg kg-1 d-1) showed potential effects on improving serum lipid profiles of hyperlipidemic mice, reflected by decreasing serum total cholesterol (TC), triglyceride (TG) and low density lipoprotein-cholesterol (LDL-C) levels by 20.05%, 45.45% and 52.63%, respectively, while IPCM-1 treatment (100 mg kg-1 d-1) remarkably decreased TC, TG and LDL-C levels by 20.74%, 47.93%, and 38.25%, respectively. In addition, EPCM-1 ameliorated hyperlipidemia possibly through upregulating the expression of serum lipoprotein lipase (LPL) and down-regulating the expression of hepatic 3-hydroxy-3-methylglutaryl-CoA reductase (HMGR), as determined by enzyme-linked immunosorbent assay (ELISA) method, while IPCM-1 remarkably upregulated the expression of serum LPL. This study confirms polysaccharides from C. militaris could be explored as functional foods or natural medicines for preventing hyperlipidemia.