RESUMEN
Sensors based on surface plasmon resonances (SPRs) have proven themselves as promising devices for molecular investigations - still there is potential to determine the geometrical parameter set for optimal sensing performance. Here we propose a comprehensive design rule for one-dimensional plasmonic grating structures. We present an analytical approach, which allows for estimation of the grating parameters for best SPR coupling efficiency for any geometry and design wavelength. On the example of sinusoidal gratings, we expand this solution and discuss numerically and experimentally, how the grating modulation depth can be refined to achieve optimal signal resolution. Finally, we propose a benchmark factor to assess the sensor performance, which can be applied to any sensing scheme utilizing resonances, allowing for comparison of different technological platforms.
Asunto(s)
Técnicas Biosensibles , Resonancia por Plasmón de Superficie/métodos , Algoritmos , Bioquímica/métodos , Diseño de Equipo , Análisis de Fourier , Metales/química , Microscopía Electrónica de Rastreo/métodos , Modelos Estadísticos , Modelos Teóricos , RefractometríaRESUMEN
The fabrication and characterization of continuously tunable, solution-processed distributed feedback (DFB) lasers in the visible regime is reported. Continuous thin film thickness gradients were achieved by means of horizontal dipping of several conjugated polymer and blended small molecule solutions on cm-scale surface gratings of different periods. We report optically pumped continuously tunable laser emission of 13 nm in the blue, 16 nm in the green and 19 nm in the red spectral region on a single chip respectively. Tuning behavior can be described with the Bragg-equation and the measured thickness profile. The laser threshold is low enough that inexpensive laser diodes can be used as pump sources.
