RESUMEN
In recent years, cannabis has been proposed and promoted not only as a medicine for the treatment of a variety of illnesses, but also as an industrial crop for different purposes. Being an agricultural product, cannabis inflorescences may be contaminated by environmental pathogens at high concentrations, which might cause health problems if not controlled. Therefore, limits have to be placed on the levels of aerobic bacteria as well as yeast and mold. To ensure the safety of cannabis plant material and related products, a remediation process has to be put in place. Gamma irradiation is a sterilization process mainly used for pharmaceuticals, foods, cosmetics, agricultural, and herbal products including cannabis plant material. This study was designed to determine the effect of irradiation on the microbial count as well as on the chemical and physical profiles of the cannabis biomass, particularly cannabinoids, terpenes, and moisture content. The full cannabinoid profile was measured by GC/FID and HPLC analysis, while terpene profile and moisture content were determined using GC/MS and Loss on Drying (LoD) methods, respectively. Analyses were conducted on the samples before and after gamma irradiation. The results showed that the minimum and maximum doses were 15 and 20.8 KiloGray (KGY), respectively. Total Aerobic Microbial Count (TAMC) and Total Yeast and Mold Count (TYMC) were determined. The study showed that irradiation has no effect on the cannabinoids and little effect on terpenes and moisture content, but it did result in the virtual sterilization of the plant material, as evidenced by the low levels of bacterial and fungal colony-forming units (CFUs) < 10 after gamma irradiation.
Asunto(s)
Cannabinoides , Cannabis , Alucinógenos , Cannabinoides/química , Cannabis/química , Terpenos/análisis , Saccharomyces cerevisiae , Biomasa , Agonistas de Receptores de CannabinoidesRESUMEN
Background: Cannabis sativa is a psychoactive plant indigenous to Central and South Asia, traditionally used both for recreational and religious purposes, in addition to folk medicine. Cannabis is a rich source of natural compounds, the most important of which are commonly known as cannabinoids that cause a variety of effects through interaction with the endocannabinoid system. Materials and Methods: In this study, a high-performance liquid chromatography-ultraviolet/photodiode array (PDA) method was developed and validated for the analysis of 15 cannabinoids in cannabis plant materials and cannabis-based marketed products. These cannabinoids are cannabidivarinic acid, cannabidivarin, cannabidiolic acid, cannabigerolic acid, cannabigerol, cannabidiol, delta-9-tetrahydrocannabivarin, delta-9-tetrahydrocannabivarinic acid, cannabinol, delta-9-tetrahyrocannabinol, delta-8-tetrahyrocannabinol, cannabicyclol, cannabichromene, delta-9-tetrahyrocannabinolic acid A, and cannabichromenic acid. The separation was carried out using a reversed-phase Luna® C18(2) column and a mobile phase consisting of 75% acetonitrile and 0.1% formic acid in water. A PDA detector was used, and data were extracted at λ=220 nm. Principal component analysis of cannabis four varieties was performed. Results: The method was linear over the calibration range of 5-75 µg/mL with R2>0.999 for all cannabinoids. This method was sensitive and gave good baseline separation of all examined cannabinoids with limits of detection ranging between 0.2 and 1.6 µg/mL and limits of quantification ranging between 0.6 and 4.8 µg/mL. The average recoveries for all cannabinoids were between 81% and 104%. The measured repeatability and intermediate precisions (% relative standard deviation) in all varieties ranged from 0.35% to 9.84% and 1.11% to 5.26%, respectively. Conclusions: The proposed method is sensitive, selective, reproducible, and accurate. It can be applied for the simultaneous determination of these cannabinoids in the C. sativa biomass and cannabis-derived marketed products.
RESUMEN
Qualitative analysis of several commercial products containing Δ8-tetrahydrocannabinol (Δ8-THC) as a major component using GC-MS resulted in the identification of several impurities along with Δ8-THC. In an attempt to isolate and identify these impurities, a commercial Δ8-THC distillate was selected for the isolation work. Eleven impurities were isolated using a variety of chromatographic techniques, and their chemical structures were determined. These include Δ4,8-iso-tetrahydrocannabinol (1), Δ4-iso-tetrahydrocannabinol (2), Δ8-cis-iso-tetrahydrocannabinol (3), 4,8-epoxy-iso-tetrahydrocannabinol (4), 8-hydroxy-iso-tetrahydrocannabinol (5), 9ß-hydroxyhexahydrocannabinol (6), 9α-hydroxyhexa-hydrocannabinol (7), iso-tetrahydrocannabifuran (8), cannabicitran (CBT, 9), olivetol (10), and Δ9-THC (11). The chemical structures of the purified compounds were determined using several spectroscopic methods, including 1D (1H, 13C, and DEPT-135) and 2D (COSY, HMQC, HMBC, and NOESY) NMR, LC-MS, and GC-MS. Other naturally occurring cannabinoids and impurities were also identified in GC-MS chromatograms but were not isolated. These were cannabidiol (CBD, 12), cannabinol (CBN, 13), hexahydrocannabinol (HHC, 14), and Δ8-tetrahydrocannabivarin (Δ8-THCV, 15). The chemical structure of Δ8-THCV (15), for which a standard was not available, was confirmed by partial synthesis and NMR analysis. This is the first report for many of the above compounds as well as Δ8-THCV as impurities in Δ8-THC products.
Asunto(s)
Cannabidiol , Cannabinoides , Dronabinol , Cannabinoides/análisis , Cannabinol , Cannabidiol/análisis , Cromatografía de Gases y Espectrometría de Masas/métodosRESUMEN
This study uses a liquid chromatography-electrospray ionization-tandem mass spectrometry method to determine ß-Sitosterol and Ferulic acid in Pygeum africanum extract. Chromatographic separation of the two analytes was performed on an ACQUITY UPLC H-Class system coupled with Xevo TQD mass spectrometer and HSS T3 C18 column (2.1 X 50 mm, 1.8 µm). Mobile phase A consisted of an aqueous solution of 0.1% formic acid (v/v), and mobile phase B was 0.1% formic acid (v/v) in methanol pumped through a gradient elution mode. Mass spectrometer parameters were optimized using an electrospray ionization source in the positive and negative ionization modes. The quantification of the two analytes was performed using multiple reaction monitoring transitions. The method was fully validated per (FDA) guidelines regarding linearity, accuracy, precision, carryover and selectivity. The proposed method was applied successfully to determine the two investigated compounds in commercially available pharmaceutical products.
Asunto(s)
Prunus africana , Espectrometría de Masas en Tándem , Espectrometría de Masas en Tándem/métodos , Cromatografía Líquida de Alta Presión/métodos , Reproducibilidad de los ResultadosRESUMEN
For decades, Cannabis sativa had been illegal to sell or consume around the world, including in the United States. However, in light of the recent 2018 Farm Bill and the legalization of hemp across the US, various cannabis preparations have flooded the market, making it essential to be able to quantitate the levels of the different acidic and neutral cannabinoids in C. sativa and to have a complete cannabinoid profile of the different chemovars of the cannabis plant. A GC-FID method was developed and validated for the analysis of 20 acidic and neutral cannabinoids as trimethylsilyl (TMS) derivatives. The analyzed cannabinoids include cannabidivarinic acid (CBDVA), cannabidiolic acid (CBDA), cannabinolic acid (CBNA), cannabielsoic acid (CBEA), cannabicyclolic acid (CBLA), cannabichromenic acid (CBCA), trans-Δ9-tetrahydrocannabivarinic acid (Δ9-THCVA), trans-Δ9-tetrahydrocannabinolic acid A (Δ9-THCAA), cannabigerolic acid (CBGA), cannabidiol (CBD), cannabicyclol (CBL), cannabidivarin (CBDV), trans-Δ9-tetrahydrocannabivarin (THCV), cannabichromene (CBC), trans-Δ8-tetrahydrocannabinol (Δ8-THC), trans-Δ9-tetrahydrocannabinol (Δ9-THC), cannabigerol (CBG), cannabinol (CBN), cannabicitran (CBT), and cannabielsoin (CBE). The method limit of detection (LOD) was as low as 0.1 µg/mL, while the limit of quantitation ranged from 0.25 µg/mL to 0.5 µg/mL. The precision (%RSD) was < 10%, while trueness ranged from 90â-â107%. The developed method is simple, accurate, and sensitive for the quantitation of all 20 acidic and neutral cannabinoids. Finally, the proposed method was successfully applied to the quantitation of the cannabinoids in different cannabis chemovars grown at the University of Mississippi.
Asunto(s)
Cannabinoides , Cannabis , Cannabinoides/análisis , Límite de DetecciónRESUMEN
Background: Cannabis has a long history of being credited with centuries of healing powers for millennia. The cannabis plant is a rich source of cannabinoids and terpenes. Each cannabis chemovar exhibits a different flavor and aroma, which are determined by its terpene content. Methods: In this study, a gas chromatography-flame ionization detector method was developed and validated for the determination of the 10 major terpenes in the main three chemovars of Cannabis sativa L. with n-tridecane used as the internal standard following the standard addition method. The 10 major terpenes (monoterpenes and sesquiterpenes) are α-pinene, ß-pinene, ß-myrcene, limonene, terpinolene, linalool, α-terpineol, ß-caryophyllene, α-humulene, and caryophyllene oxide. The method was validated according to Association of Official Analytical Chemists guidelines. Spike recovery studies for all terpenes were carried out on placebo cannabis material and indoor-growing high THC chemovar with authentic standards. Results: The method was linear over the calibration range of 1-100 µg/mL with r2>0.99 for all terpenes. The limit of detection and limit of quantification were calculated to be 0.3 and 1.0 µg/mL, respectively, for all terpenes. The accuracy (%recovery) at all levels ranged from 89% to 104% and 90% to 111% for placebo and indoor-growing high THC chemovar, respectively. The repeatability and intermediate precision of the method were evaluated by the quantification of target terpenes in the three different C. sativa chemovars, resulting in acceptable relative standard deviations (less than 10%). Conclusions: The developed method is simple, sensitive, reproducible, and suitable for the detection and quantification of monoterpenes and sesquiterpenes in C. sativa biomass.
RESUMEN
Medicinal plants are widely used in folk medicine to treat various diseases. Thonningia sanguinea Vahl is widespread in African traditional medicine, and exhibits antioxidant, antibacterial, antiviral, and anticancer activities. T. sanguinea is a source of phytomedicinal agents that have previously been isolated and structurally elucidated. Herein, gas chromatography combined with tandem mass spectrometry (GC-MS/MS) was used to quantify epipinoresinol, ß-sitosterol, eriodictyol, betulinic acid, and secoisolariciresinol contents in the methanolic crude extract and its ethyl acetate fraction for the first time. The ethyl acetate fraction was rich in epipinoresinol, eriodictyol, and secoisolariciresinol at concentrations of 2.3, 3.9, and 2.4 mg/g of dry extract, respectively. The binding interactions of these compounds with the epidermal growth factor receptor (EGFR) were computed using a molecular docking study. The results revealed that the highest binding affinities for the EGFR signaling pathway were attributed to eriodictyol and secoisolariciresinol, with good binding energies of -19.93 and -16.63 Kcal/mol, respectively. These compounds formed good interactions with the key amino acid Met 769 as the co-crystallized ligand. So, the ethyl acetate fraction of T. sanguinea is a promising adjuvant therapy in cancer treatments.
Asunto(s)
Balanophoraceae , Espectrometría de Masas en Tándem , Acetatos , Butileno Glicoles , Receptores ErbB , Flavanonas , Cromatografía de Gases y Espectrometría de Masas , Lignanos , Simulación del Acoplamiento Molecular , Triterpenos Pentacíclicos , Extractos Vegetales/química , Sitoesteroles , Ácido BetulínicoRESUMEN
Efficiency of drug delivery is product of drug properties and formulation design. Modulating drug's unfavorable properties such as poor solubility or permeation is the first step towards optimum delivery. By combining a drug with a selected bulky counter ion, it can be transformed into a low-melting point salt, i.e., an ionic liquid (IL), with favorable physicochemical properties. In this study, we prepared a novel IL of anti-inflammatory drug, ketoprofen (KP), to enable its transdermal administration. KP was paired with piperine (PI) forming equimolar KP-PI IL, via solvent evaporation. KP-PI IL showed extended stability. Thermal analysis and X-ray diffractometry proved that KP was transformed into a low-melting point amorphous form, while spectroscopic analysis and computational studies demonstrated that KP-PI interaction was mediated by hydrogen bonding. In the IL form, KP's solubility increased due to IL formation by 71 to 83%, while 218% more KP was permeated through rat skin in the IL form, than in a KP/PI mixture. Importantly, upon transdermal administration to rats with induced paw edema; KP-PI IL resulted in a 68% less paw swelling than KP/PI mixture. These findings demonstrate the utility of IL as an economic, simple and efficient strategy for improving the therapeutic application of drugs/drug combinations.
Asunto(s)
Líquidos Iónicos , Cetoprofeno , Alcaloides , Animales , Antiinflamatorios no Esteroideos/química , Benzodioxoles , Cetoprofeno/química , Preparaciones Farmacéuticas , Piperidinas , Alcamidas Poliinsaturadas , RatasRESUMEN
The current study was designed to investigate the antioxidant and cytotoxic activities of Thonningia sanguinea whole-plant extract. The total phenolic content was determined using Folin-Ciocalteu reagent and found to be 980.1 mg/g, calculated as gallic acid equivalents. The antioxidant capacity was estimated for the crude extract and the phenolic portion of T. sanguinea, whereupon both revealed a dose-dependent scavenging rate of DPPH⢠with EC50 values of 36.33 and 11.14 µg/mL, respectively. Chemical profiling of the plant extract was achieved by LC-ESI-TOF-MS/MS analysis, where 17 compounds were assigned, including ten compounds detected in the negative mode and seven detected in the positive mode. The phenolic portion exhibited promising cytotoxic activity against MCF-7 and HepG2 cells, with IC50 values of 16.67 and 13.51 µg/mL, respectively. Phenolic extract treatment caused apoptosis in MCF-7 cells, with total apoptotic cell death 18.45-fold higher compared to untreated controls, arresting the cell cycle at G2/M by increasing the G2 population by 39.7%, compared to 19.35% for the control. The apoptotic investigation was further validated by the upregulation of proapoptotic genes of P53, Bax, and caspases-3,8 9, and the downregulation of Bcl-2 as the anti-apoptotic gene. Bcl-2 inhibition was also virtualized by good binding interactions through a molecular docking study. Taken together, phenolic extract exhibited promising cytotoxic activity in MCF-7 cells through apoptosis induction and antioxidant activation, so further fractionation studies are recommended for the phenolic extract for specifying the most active compound to be developed as a novel anti-cancer agent.
RESUMEN
Terpenes are the major components of the essential oils present in various Cannabis sativa L. varieties. These compounds are responsible for the distinctive aromas and flavors. Besides the quantification of the cannabinoids, determination of the terpenes in C. sativa strains could be of importance for the plant selection process. At the University of Mississippi, a GC-MS method has been developed and validated for the quantification of terpenes in cannabis plant material, viz., α-pinene, ß-pinene, ß-myrcene, limonene, terpinolene, linalool, α-terpineol, ß-caryophyllene, α-humulene, and caryophyllene oxide. The method was optimized and fully validated according to AOAC (Association of Official Analytical Chemists) guidelines against reference standards of selected terpenes. Samples were prepared by extraction of the plant material with ethyl acetate containing n-tridecane solution (100 µg/mL) as the internal standard. The concentration-response relationship for all analyzed terpenes using the developed method was linear with r2 values > 0.99. The average recoveries for all terpenes in spiked indoor cultivated samples were between 95.0â-â105.7%, with the exception of terpinolene (67â-â70%). The measured repeatability and intermediate precisions (% relative standard deviation) in all varieties ranged from 0.32 to 8.47%. The limit of detection and limit of quantitation for all targeted terpenes were determined to be 0.25 and 0.75 µg/mL, respectively. The proposed method is highly selective, reliable, and accurate and has been applied to the simultaneous determination of these major terpenes in the C. sativa biomass produced by our facility at the University of Mississippi as well as in confiscated marijuana samples.
Asunto(s)
Cannabis/química , Cromatografía de Gases y Espectrometría de Masas/métodos , Terpenos/análisis , Límite de Detección , Reproducibilidad de los Resultados , Terpenos/aislamiento & purificaciónRESUMEN
A liquid chromatography-tandem mass spectrometry single-laboratory validation was performed for the detection and quantification of the 10 major cannabinoids of cannabis, namely, (-)-trans-Δ9-tetrahydrocannabinol, cannabidiol, cannabigerol, cannabichromene, tetrahydrocannabivarian, cannabinol, (-)-trans-Δ8-tetrahydrocannabinol, cannabidiolic acid, cannabigerolic acid, and Δ9-tetrahydrocannabinolic acid-A, in the root extract of Cannabis sativa. Acetonitrileâ:âmethanol (80â:â20, v/v) was used for extraction; d3-cannabidiol and d3- tetrahydrocannabinol were used as the internal standards. All 10 cannabinoids showed a good regression relationship with r2 > 0.99. The validated method is simple, sensitive, and reproducible and is therefore suitable for the detection and quantification of these cannabinoids in extracts of cannabis roots. To our knowledge, this is the first report for the quantification of cannabinoids in cannabis roots.
Asunto(s)
Cannabinoides/análisis , Cannabis/química , Cromatografía Liquida/métodos , Extractos Vegetales/química , Raíces de Plantas/química , Espectrometría de Masas en Tándem/métodosRESUMEN
Cannabis (Cannabis sativa L.) is an annual herbaceous plant that belongs to the family Cannabaceae. Trans-Δ9-tetrahydrocannabinol (Δ9-THC) and cannabidiol (CBD) are the two major phytocannabinoids accounting for over 40% of the cannabis plant extracts, depending on the variety. At the University of Mississippi, different strains of C. sativa, with different concentration ratios of CBD and Δ9-THC, have been tissue cultured via micropropagation and cultivated. A GC-FID method has been developed and validated for the qualitative and quantitative analysis of acid and neutral cannabinoids in C. sativa extracts. The method involves trimethyl silyl derivatization of the extracts. These cannabinoids include tetrahydrocannabivarian, CBD, cannabichromene, trans-Δ8-tetrahydrocannabinol, Δ9-THC, cannabigerol, cannabinol, cannabidiolic acid, cannabigerolic acid, and Δ9-tetrahydrocannabinolic acid-A. The concentration-response relationship of the method indicated a linear relationship between the concentration and peak area ratio with R2 > 0.999 for all 10 cannabinoids. The precision and accuracy of the method were found to be ≤ 15% and ± 5%, respectively. The limit of detection range was 0.11â-â0.19 µg/mL, and the limit of quantitation was 0.34â-â0.56 µg/mL for all 10 cannabinoids. The developed method is simple, sensitive, reproducible, and suitable for the detection and quantitation of acidic and neutral cannabinoids in different extracts of cannabis varieties. The method was applied to the analysis of these cannabinoids in different parts of the micropropagated cannabis plants (buds, leaves, roots, and stems).
Asunto(s)
Cannabinoides/análisis , Cannabis/química , Ionización de Llama/métodos , Extractos Vegetales/química , Cannabidiol/análisis , Dronabinol/análisisRESUMEN
Azathioprine is a highly efficient immunosuppressant drug used for treatment of inflammatory bowel disease (IBD). Systemic administration of azathioprine results in delayed therapeutic effect and serious adverse reactions. In the current study, we have developed, for the first time, colon-targeted chitosan beads for delivery of azathioprine in colitis rabbit model. Several characterizations were performed for the azathioprine-loaded beads (e.g. drug encapsulation efficiency, drug loading capacity, yield, size, shape and compatibility with other ingredients). The in vitro release profiles of acid-resistant capsules filled with azathioprine-loaded beads showed that most of azathioprine was released in IBD colon simulating medium. The therapeutic effects of azathioprine-loaded beads and azathioprine crude drug were examined on acetic acid-induced colitis rabbit model. Improved therapeutic outcomes were observed in the animals treated with the azathioprine-loaded beads, as compared to the untreated animal controls and the animals treated with the azathioprine free drug, based on the clinical activity score, index of tissue edema, mortality rate, colon macroscopic score and colon histopathological features. In the animals treated with the azathioprine-loaded beads, the levels of the inflammatory mediators, myeloperoxidase enzyme and tumor necrosis factor-α, were significantly reduced to levels similar to those observed in the normal rabbits. Furthermore, the activities of the antioxidant enzymes, superoxide dismutase and catalase, were restored considerably in the animals treated with the drug-loaded beads. The azathioprine-loaded beads developed in the current study might have great potential in the management of IBD.