Size control of induced pluripotent stem cells colonies in two-dimensional culture for differentiation into functional monocyte-like cells.

BACKGROUND AIMS: Monocytes, derived from hematopoietic stem cells (HSCs), play a pivotal role in the immune response to cancer. Although they are an attractive source of cell therapy for cancer, a method for ex vivo expansion has not yet been established. Monocytes differentiated from pluripotent stem cells (PSCs), including induced pluripotent stem cells (iPSCs), can be an alternative source of HSC-derived monocytes because of their self-renewal and pluripotency. To develop a standardized method for the generation of iPSC-derived monocytes for future clinical applications, we aim to control the size of the iPSC colony. METHODS: To this end, we developed a plate with multiple dots containing a chemical substrate for the iPSC scaffold. iPSCs placed in the plate expanded only on the dots and created colonies of the same size. The cells were then differentiated into monocytes by adding cytokines to the colonies. RESULTS: The dot plate substantially reduced variability in monocyte-like cell generation when compared with cultivating cells on a plate with the substrate covering the entire surface area. Furthermore, more monocyte-like cells were obtained by adjusting the dot size and the distance between the dots. The iPSC-derived monocyte-like cells phagocytosed cancer cells and secreted proinflammatory cytokines. The cells also expressed Fc receptors and exerted immunoglobulin G-mediated killing of cancer cells with the corresponding antibodies. CONCLUSIONS: The dot plate enabled the control of iPSC colony size in two-dimensional culture, which resulted in a reduction in the generation-variation of functional monocyte-like cells. This standardized method for generating iPSC-derived monocyte-like cells using the dot plate could also facilitate the development of an automated closed system on a large scale for clinical applications.

Improved Production of Induced Pluripotent Stem Cells Using Dot Pattern Culture Plates.

The rate of cell proliferation is a crucial factor in cell production under good manufacturing practice (GMP) control. In this study, we identified a culture system for induced pluripotent cells (iPSCs) that supports cell proliferation and viability and maintains the cells in an undifferentiated state even at 8 days after seeding. This system involves the use of dot pattern culture plates that have been coated with a chemically defined scaffold which has high biocompatibility. Under cell starvation conditions, where medium exchange was not performed for 7 days or where the amount of medium exchange was reduced to half or a quarter, iPSC viability and lack of differentiation were maintained. The rate of cell viability in this culture system was greater than generally obtained by standard culture methods. The cells in this compartmentalized culture system could be induced to differentiate in a controlled and consistent manner: differentiation of endoderm occurred in a controlled and consistent manner: endoderm, mesoderm, and ectoderm could be consistently induced to differentiate in the cultures. In conclusion, we have developed a culture system that supports high viability in iPSCs and allows their controlled differentiation. This system has the potential for use in GMP-based production of iPSCs for clinical purposes.

Adhesion Characteristics of Human Pancreatic Islets, Duct Epithelial Cells, and Acinar Cells to a Polymer Scaffold.

We reported in 2018 that among several extracellular matrices, fibronectin, type I collagen, type IV collagen, laminin I, fibrinogen, and bovine serum albumin, fibronectin is particularly useful for adhesion of porcine pancreatic tissue. Subsequently, we developed a technology that enables the chemical coating of the constituent motifs of fibronectin onto cell culture dishes. In this experiment, we used islets (purity ≥ 90%), duct epithelial cells (purity ≥ 60%), and acinar cells (purity ≥ 99%) isolated from human pancreas according to the Edmonton protocol published in 2000 and achieved adhesion to the constituent motifs of fibronectin. A solution including cGMP Prodo Islet Media was used as the assay solution. In islets, adhesion was enhanced with the constitutive motifs of fibronectin compared with uncoated islets. In the functional evaluation of islets, insulin mRNA expression and insulin secretion were enhanced by the constitutive motif of fibronectin compared with non-coated islets. The stimulation index was comparable between non-coated islets and fibronectin motifs. In duct epithelial cells, adhesion was mildly promoted by the fibronectin component compared with non-coated component, while in acinar cells, adhesion was inhibited by the fibronectin component compared with the non-coated component. These data suggest that the constitutive motifs of fibronectin are useful for the adhesion of islets and duct epithelial cells.

A chemically-defined plastic scaffold for the xeno-free production of human pluripotent stem cells.

Clinical use of human pluripotent stem cells (hPSCs) is hampered by the technical limitations of their expansion. Here, we developed a chemically synthetic culture substrate for human pluripotent stem cell attachment and maintenance. The substrate comprises a hydrophobic polyvinyl butyral-based polymer (PVB) and a short peptide that enables easy and uniform coating of various types of cell culture ware. The coated ware exhibited thermotolerance, underwater stability and could be stored at room temperature. The substrate supported hPSC expansion in combination with most commercial culture media with an efficiency similar to that of commercial substrates. It supported not only the long-term expansion of examined iPS and ES cell lines with normal karyotypes during their undifferentiated state but also directed differentiation of three germ layers. This substrate resolves major concerns associated with currently used recombinant protein substrates and could be applied in large-scale automated manufacturing; it is suitable for affordable and stable production of clinical-grade hPSCs and hPSC-derived products.

Quantification of azide groups on a material surface and a biomolecule using a clickable and cleavable fluorescent compound.

Here, we propose a novel method for quantifying azide groups on a solid surface and a protein using a clickable and cleavable fluorescent compound. The clickable and cleavable fluorescent compound conjugates with the azide groups on the material surface and the fluorophore is then liberated into the solvent via a cleavage reaction, which can be simply quantified with a conventional fluorometer.

Rational and practical exfoliation of graphite using well-defined poly(3-hexylthiophene) for the preparation of conductive polymer/graphene composite.

Processing and manipulation of highly conductive pristine graphene in large quantities are still major challenges in the practical application of graphene for electric device. In the present study, we report the liquid-phase exfoliation of graphite in toluene using well-defined poly(3-hexylthiophene) (P3HT) to produce a P3HT/graphene composite. We synthesize and use regioregular P3HT with controlled molecular weights as conductive dispersants for graphene. Simple ultrasonication of graphite flakes with the P3HT successfully produces single-layer and few-layer graphene sheets dispersed in toluene. The produced P3HT/graphene composite can be used as conductive graphene ink, indicating that the P3HT/graphene composite has high electrical conductivity owing to the high conductivity of P3HT and graphene. The P3HT/graphene composite also works as an oxidation-resistant and conductive film for a copper substrate, which is due to the high gas-barrier property of graphene.

Inflammatory pseudotumor of the kidney with renal artery penetration.

Inflammatory pseudotumor (IPT) is a quasineoplastic lesion that most commonly involves the lung and the orbit; kidney involvement is rare. We report a case of inflammatory pseudotumor of the kidney. The patient was a 61-year-old man who presented with no symptoms. Nonenhanced computed tomography (CT) demonstrated an ill-defined, isodensity mass measuring 3.5 cm in the lower portion of the left kidney. Contrast-enhanced CT showed that branches of the renal artery without encasement penetrated the tumor; there was a little enhancement in the mass on the arterial phase and homogeneous enhancement on the venous phase. On magnetic resonance imaging the mass showed intermediate signal intensity on T1-weighted images (T1WIs) and low signal intensity on T2WIs. Most IPTs of the kidney appear as an ill-defined, hypovascular, homogeneous tumor on CT images, with variable signal intensity on MRI T1WIs and low signal intensity on T2WIs. Our case had the same imaging findings, with branches of the renal artery penetrating the tumor. If the renal tumor has these radiological findings, the tumor may be IPT.

Analysis of human ejaculation using color Doppler ultrasonography: a comparison between antegrade and retrograde ejaculation.

OBJECTIVES: To observe the phenomenon of human ejaculation dynamically using color Doppler ultrasonography. METHODS: Human ejaculation was observed using transrectal color Doppler ultrasonography in a healthy man and a patient with retrograde ejaculation. Ejaculation was induced manually with audiovisual sexual stimulation. The ejaculatory phenomenon was analyzed and compared with that of retrograde ejaculation. RESULTS: In the healthy man, the prostatic urethra flattened slightly and the bladder neck contracted just before expulsion. The ejaculatory stream spurted from the seminal vesicles to the bulbous urethra through the ejaculatory duct. In the patient with retrograde ejaculation, the ejaculatory stream from the seminal vesicles and inframontanal and distal prostatic urethras distended into a globular-shaped sac filled with semen. No seminal flow toward the bulbous urethra occurred. The semen remaining in the prostatic urethra began flowing slowly into the bladder. CONCLUSIONS: Differences between antegrade and retrograde ejaculation can be clearly detected by color Doppler ultrasonography, providing a noninvasive method to diagnose ejaculatory disorders.

Laparoscopic removal of Müllerian structures and orchiopexy for persistent Müllerian duct syndrome.

A 1-year-old boy presented for evaluation of bilateral undescended testes. Diagnostic laparoscopy was conducted, and uterine tissue with bilateral gonads was detected in the rectovesical fossa. Chromosomal analysis revealed a 46,XY karyotype. Persistent müllerian duct syndrome was diagnosed, and laparoscopic surgery was performed to treat this condition. The uterus was incised at a distal site and withdrawn through the port. The bilateral testes were fixed in the scrotum. The patient was discharged 3 days later. We believe that the laparoscopic approach is a valid, alternative choice to traditional surgery for resolution of this condition, permitting minimally invasive surgery.

Localization of dynamin 2 in rat seminiferous tubules during the spermatogenic cycle.

Dynamin is a protein essential to endocytosis. Dynamin 2, a dynamin isoform, is expressed most intensely in testicular tissue; however, precise localization has never been studied. Therefore, we investigated the expression of dynamin 2 in rat testicular tissue using immunohistochemical methods, and discuss here the physiological function of this protein. Testicular tissues were obtained from Wistar rats at 10, 21 and 63 days of age. Immunohistochemistrical examination and Western blot analysis were conducted using dynamin 2 specific antibody. Western blot analysis showed that expression in 21- and 63-day-old rats was more intense than that in 10-day-old rats. Dynamin 2 expression was observed using immunohistochemical method in the seminiferous tubules of all rats. In the 63-day-old rats, the expression was intense, especially in spermatids in the earlier maturation stages and in spermatocytes, and was observed in Sertoli cells. However, in spermatids, the expression gradually declined as spermatids matured to spermatozoa. In the 21-day-old rats, the expression was evident in spermatocytes and Sertoli cells, but that in the 10-day-old rats was weak. Intense expression of dynamin 2 during spermatogenesis suggests that this protein plays an important role in this process.

Laparoscopic radical prostatectomy: initial cases at Okayama University Hospital.

We performed laparoscopic prostatectomy in seven cases with organ-confined prostate cancer. In 6 cases, the surgery was completed successfully and the mean operative time was 424 min. Volume of blood loss was 200 to 3,200 ml and catheterization lasted 6 to 37 days. No major complications were observed in 6 of the cases. In one case, open surgical conversion was necessary mainly due to a bladder injury. Although these were the first cases of laparoscopic prostatectomy in our institution, the technical difficulty and complexity of the surgery were moderate. We believe that laparoscopic radical prostatectomy will become a standard option for the treatment of organ-confined prostate cancer.