RESUMEN
Access to clean water, hygiene, and sanitation is becoming an increasingly pressing global demand, particularly owing to rapid population growth and urbanization. Phytoremediation utilizes a highly conserved phytochelatin in plants, which captures hazardous heavy metal ions from aquatic environments and sequesters them in vacuoles. Herein, we report the design of phytochelatin-inspired copolymers containing carboxylate and thiolate moieties. Titration calorimetry results indicate that the coexistence of both moieties is essential for the excellent Cd2+ ion-capturing capacity of the copolymers. The obtained dissociation constant, KD ~ 1 nM for Cd2+ ion, is four-to-five orders of magnitude higher than that for peptides mimicking the sequence of endogenous phytochelatin. Furthermore, infrared and nuclear magnetic resonance spectroscopy results unravel the mechanism underlying complex formation at the molecular level. The grafting of 0.1 g bio-inspired copolymers onto silica microparticles and cellulose membranes helps concentrate the copolymer-coated microparticles in ≈3 mL volume to remove Cd2+ ions from 0.3 L of water within 1 h to the drinking water level (<0.03 µM). The obtained results suggest that hyperconfinement of bio-inspired polymers in flow-through systems can be applied for the highly selective removal of harmful contaminants from the environmental water.
Asunto(s)
Metales Pesados , Polímeros , Purificación del Agua , Polímeros/química , Purificación del Agua/métodos , Metales Pesados/química , Metales Pesados/aislamiento & purificación , Biodegradación Ambiental , Contaminantes Químicos del Agua/química , Cadmio/química , Fitoquelatinas/metabolismo , Fitoquelatinas/química , Celulosa/química , Dióxido de Silicio/química , Iones/químicaRESUMEN
Chitosan is a product of deacetylated chitin and a natural polymer that is attractive as a functional and biocompatible material in the pursuit of alternative materials to synthetic plastics for a sustainable society. Although hierarchical architectures, from precise molecular structures to nanofibers and twisted structures, have been clarified, the expansion of the anisotropic microstructures of chitosan into millimeter-scale materials is in the process of development. In this study, a chitosan network was reconstructed from an aqueous solution by using the meniscus splitting method to form a three-dimensionally ordered microstructure. A chitosan membrane deposited on the millimeter scale formed a useful anisotropically pH-responsive hydrogel. During the evaporation of the aqueous solution from a finite space, chitosan underwent ordered deposition by capillary force to form a membrane with oriented microstructures and microlayers. Unlike the cast films formed between solid-liquid and air-liquid interfaces, this membrane formed between two air-liquid interfaces. As a result, the membranes with ordered microstructures were capable of signifying directional swelling in aqueous environments and reversible/irreversible swelling-deswelling changes by controlling the pH range. We envision that the anisotropic pH response of the chitosan network can be utilized under physiological conditions as a next-generation material.
RESUMEN
We have found an efficient adsorption feature provided by an NaCaA-85 zeolite for N2O even at 298 K and at lower pressures: N2O adsorption capacities of 1.33 mmol g-1 and 4.69 mmol g-1 under respective pressures of 0.3 and at 100 Torr, respectively, indicating the best performance among adsorbent materials so far reported. These adsorption peculiarities will pave a new way for developing excellent materials working for adsorption/separation processes of N2O.
RESUMEN
Understanding the water adsorptive behavior of fullerenes is of particular importance for their material application in aqueous media. The conventional fullerenols usually provide complex physical pictures of water adsorption due to their uncontrollable hydroxylation degree and substitution pattern. Herein, we focus on poorly hydroxylated fullerenes with well-defined structures. The water adsorptive behavior was examined by synchrotron IR spectroscopy and computational studies. As a result, three types of IR bands were observed for adsorbed water. The population of the three states was considerably altered by the orientational difference of the hydroxy groups. Nevertheless, water adsorption could not occur for 9-fluorenol and catechol. This indicates that the Lewis acidic fullerene π-surface plays a prominent role in water adsorption, while the rather Lewis basic π-surface of 9-fluorenol is unable to attract much water at a boundary with humid air.
RESUMEN
Novel water-dispersible donor-acceptor-donor π-conjugated bolaamphiphiles, having dibenzophenazine as the acceptor and heteroatom-bridged amphiphilic diarylamines as the donors, have been developed. The materials displayed a distinct photoluminescence color change in response to humidity in a poly(vinylalcohol) matrix.
RESUMEN
Most mechanochromic luminescent compounds are crystalline and highly hydrophobic; however, mechanochromic luminescent molecular assemblies comprising amphiphilic molecules have rarely been explored. This study investigated mechanochromic luminescent supramolecular fibers composed of dumbbell-shaped 9,10-bis(phenylethynyl)anthracene-based amphiphiles without any tetraethylene glycol (TEG) substituents or with two TEG substituents. Both amphiphiles formed water-insoluble supramolecular fibers via linear hydrogen bond formation. Both compounds acquired water solubility when solid samples composed of supramolecular fibers are ground. Grinding induces the conversion of 1D supramolecular fibers into micellar assemblies where fluorophores can form excimers, thereby resulting in a large redshift in the fluorescence spectra. Excimer emission from the ground amphiphile without TEG chains is retained after dissolution in water. The micelles are stable in water because hydrophilic dendrons surround the hydrophobic luminophores. By contrast, when water is added to a ground amphiphile having TEG substituents, fragmented supramolecular fibers with the same molecular arrangement as the initial supramolecular fibers are observed, because fragmented fibers are thermodynamically preferable to micelles as the hydrophobic arrays of fluorophores are covered with hydrophilic TEG chains. This leads to the recovery of the initial fluorescent properties for the latter amphiphile. These supramolecular fibers can be used as practical mechanosensors to detect forces at the mesoscale.
RESUMEN
Correction for 'Water-dispersible donor-acceptor-donor π-conjugated bolaamphiphiles enabling a humidity-responsive luminescence color change' by Tomoya Enjou et al., Chem. Commun., 2024, https://doi.org/10.1039/d3cc05749f.
RESUMEN
The water affinity on [60]fullerenols was found to be governed by surface electrostatic potential while water aggregation is initiated by the hydroxy groups attached on the carbon surface. The molecular water adsorption at the internal sphere caused a significnat inhibition of water adsorption at the external carbon surface.
RESUMEN
Practical applications like very thin stress-strain sensors require high strength, stretchability, and conductivity, simultaneously. One of the approaches is improving the toughness of the stress-strain sensing materials. Polymeric materials with movable cross-links in which the polymer chain penetrates the cavity of cyclodextrin (CD) demonstrate enhanced strength and stretchability, simultaneously. We designed two approaches that utilize elastomer nanocomposites with movable cross-links and carbon filler (ketjenblack, KB). One approach is mixing SC (a single movable cross-network material), a linear polymer (poly(ethyl acrylate), PEA), and KB to obtain their composite. The electrical resistance increases proportionally with tensile strain, leading to the application of this composite as a stress-strain sensor. The responses of this material are stable for over 100 loading and unloading cycles. The other approach is a composite made with KB and a movable cross-network elastomer for knitting dissimilar polymers (KP), where movable cross-links connect the CD-modified polystyrene (PSCD) and PEA. The obtained composite acts as a highly sensitive stress-strain sensor that exhibits an exponential increase in resistance with increasing tensile strain due to the polymer dethreading from the CD rings. The designed preparations of highly repeatable or highly responsive stress-strain sensors with good mechanical properties can help broaden their application in electrical devices.
RESUMEN
OBJECTIVE: Glyoxylic acid (GA) is widely used as a straight perming agent for hair care products, however, advanced GA penetration-enhancing agents are desired due to the peculiar odour and hair colour fading caused by the continuous use of GA products. Hence, it is important to develop a penetration-enhancing agent that helps minimize the GA concentration. We have found that the combined use of GA and glycolic acid (GCA) has a strong hair straightening effect. METHODS: Straightening hair test was carried out to the evaluation of the effect of additives. Liquid chromatography-mass spectrometry (LC/MS) was performed to quantify the GA penetration amount into human hair. Attenuated total reflection (ATR) Fourier transform-infrared spectroscopy (FT-IR) and FT-IR microscope were implemented to estimate the localization of GA in the hair. RESULTS: Straightening hair tests indicated that the hair straightening effect by GA was enhanced by the presence of GCA. LC/MS results showed that the addition of GCA enhanced the amount of GA that penetrated human hair by about four times. ATR FT-IR and FT-IR microscope measurements indicated that GA was localized more in the innermost region of hair (medulla) than the cortex and cuticle. The GA accumulated in the medulla disappeared after a hair straightener treatment at 180°C due to the chemical reaction. CONCLUSIONS: The GA penetration-enhancing effect of GCA is worth investigating to reduce the GA concentration in products for more comfortable use.
OBJECTIF: L'acide glyoxylique (AG) est largement utilisé en tant qu'agent de lissage pour les produits de soins capillaires. Cependant, des agents avancés améliorant la pénétration de l'AG sont souhaités en raison de l'odeur particulière et de la décoloration des cheveux causées par l'utilisation continue de produits à base d'AG. Il est donc important de mettre au point un agent améliorant la pénétration qui contribue à minimiser la concentration d'AG. Nous avons constaté que l'utilisation combinée de l'AG et de l'acide glycolique (AGC) a un fort effet lissant sur les cheveux. MÉTHODES: Un test de lissage des cheveux a été effectué pour évaluer l'effet des additifs. Une chromatographie en phase liquide avec spectrométrie de masse (liquid chromatography-mass spectrometry, LC/MS) a été réalisée pour quantifier le volume de pénétration de l'AG dans les cheveux humains. Une spectroscopie infrarouge à transformée de Fourier (Fourier transform-infrared spectroscopy, FT-IR) à réflexion totale atténuée (RTA) et un microscope FT-IR ont été adoptés pour estimer la localisation de l'AG dans les cheveux. RÉSULTATS: Les tests de lissage des cheveux ont indiqué que l'effet de lissage des cheveux de l'AG était renforcé par la présence d'AGC. Les résultats de la LC/MS ont montré que l'ajout d'AGC augmentait d'environ quatre fois la quantité d'AG pénétrant dans les cheveux humains. Les mesures de la FT-IR à RTA et du microscope FT-IR ont indiqué que l'AG était plus localisé dans la région la plus interne du cheveu (médulla) que dans le cortex et la cuticule. L'AG accumulé dans la médulla a disparu après un traitement au lisseur à cheveux à 180 °C en raison de la réaction chimique. CONCLUSIONS: L'effet d'amélioration de la pénétration de l'AG observé avec l'AGC mérite d'être étudié afin de réduire la concentration d'AG dans les produits pour une utilisation plus confortable.
Asunto(s)
Cabello , Microscopía , Humanos , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Cabello/químicaRESUMEN
Van der Waals (VDW) interactions provide fantastic properties for biological systems that function at room temperature. The VDW interaction, which primarily contributes to weak hydrogen bonding, is expected to play a key role in regulating hydrophobic hydration to express the biologically inert biocompatible function of polymerized MPCs (2-methacryloyloxyethyl phosphorylcholine). This report explores at the molecular level the biologically inert function of polymerized MPCs through an array of vibrational spectroscopic and computational characterization of MPC monomers, as temperature-dependent change of intramolecular weak hydrogen bonding. Synchrotron Fourier transform infrared microspectroscopy and terahertz time-domain spectroscopy were used to investigate temperature-dependent spectral changes in the low frequency vibrations of the MPC over the temperature range from cryogenic to room temperature, and the results were analysed by highly reliable well-established density functional theory (DFT) calculations. Complicated spectral features in the low frequency energy region and the uncertain conformations of the MPC in the amorphous powder state are clearly resolved under a polarizable continuum model and dispersion correction to pure DFT calculations.
Asunto(s)
Polímeros , Enlace de Hidrógeno , Conformación Molecular , Interacciones Hidrofóbicas e HidrofílicasRESUMEN
Recently, spark plasma sintering (SPS) has become an attractive method for the preparation of solid-state ceramics. As SPS is a pressure-assisted low-temperature process, it is important to examine the effects of temperature and pressure on the structural properties of the prepared samples. In the present study, we examined the correlation between the preparation conditions and the physical and structural properties of SiO2 glasses prepared by SPS. Compared with the conventional SiO2 glass, the SPS-SiO2 glasses exhibit a higher density and elastic modulus, but a lower-height first sharp diffraction peak of the X-ray total structure factor. Micro-Raman and micro-IR spectra suggest the formation of heterogeneous regions at the interface between the SiO2 powders and graphite die. Considering the defect formation observed in optical absorption spectra, reduction reaction mainly affects the densification of SPS-SiO2 glass. Hence, the reaction at the interface is important for tailoring the structure and physical properties of solid-state materials prepared by the SPS technique.
RESUMEN
Wide ranges of absorbance spectra were measured to elucidate a difference in the antiferro-electric (AF) ordering mechanisms below 50 and 168 K in Cs3H(SeO4)2 and Cs3D(SeO4)2, respectively. Collective excitations due to deuterons successfully observed at 610 cm-1 exhibit a remarkable isotope effect. This indicates that the transfer state in the dimer of Cs3D(SeO4)2 is dominated by a deuteron hopping in contrast to Cs3H(SeO4)2, where a proton hopping makes a tiny contribution compared to a phonon-assisted proton tunneling (PAPT) associated with 440-cm-1 defbend . The fluctuation relevant to the AF ordering in Cs3D(SeO4)2 is not driven by the conventional deuteron hopping but by the phonon-assisted deuteron hopping associated with 310-cm-1 defbend . Consequently, Cs3D(SeO4)2 has a distinct ordering mechanism from Cs3H(SeO4)2, in which quantum fluctuations toward the AF ordering are enhanced through the PAPT associated with the in-phase libration.
RESUMEN
Polyurethane (PU) materials with movable crosslinking were prepared by a typical two-step synthetic process using an acetylated γ-cyclodextrin (TAcγCD) diol compound. The soft segment of PU is polytetrahydrofuran (PTHF), and the hard segment consists of hexamethylene diisocyanate (HDI) and 1,3-propylene glycol (POD). The synthesized PU materials exhibited the typical mechanical characteristics of a movable crosslinking network, and the presence of hydrogen bonds from the urethane bonds resulted in a synergistic effect. Two kinds of noncovalent bond crosslinking increased the Young's modulus of the material without affecting its toughness. Fourier transform infrared spectroscopy and X-ray scattering measurements were performed to analyze the effect of introducing movable crosslinking on the internal hydrogen bond and the microphase separation structure of PU, and the results showed that the carbonyl groups on TAcγCD could form hydrogen bonds with the PU chains and that the introduction of movable crosslinking weakened the hydrogen bonds between the hard segments of PU. When stretched, the movable crosslinking of the PU materials suppressed the orientation of polymer chains (shish-kebab orientation) in the tensile direction. The mechanical properties of the movable crosslinked PU materials show promise for future application in the industrial field.
RESUMEN
Elucidating the state of interfacial water, especially the hydrogen-bond configurations, is considered to be key for a better understanding of the functions of polymers that are exhibited in the presence of water. Here, an analysis in this direction is conducted for two water-insoluble biocompatible polymers, poly(2-methoxyethyl acrylate) and cyclic(poly(2-methoxyethyl acrylate)), and a non-biocompatible polymer, poly(n-butyl acrylate), by measuring their IR spectra under humidified conditions and by carrying out theoretical calculations on model complex systems. It is found that the OH stretching bands of water are decomposed into four components, and while the higher-frequency components (with peaks at â¼3610 and â¼3540 cm-1) behave in parallel with the CâO and C-O-C stretching and CH deformation bands of the polymers, the lower-frequency components (with peaks at â¼3430 and â¼3260 cm-1) become pronounced to a greater extent with increasing humidity. From the theoretical calculations, it is shown that the OH stretching frequency that is distributed from â¼3650 to â¼3200 cm-1 is correlated to the hydrogen-bond configurations and is mainly controlled by the electric field that is sensed by the vibrating H atom. By combining these observed and calculated results, the configurations of water at the interface of the polymers are discussed.
Asunto(s)
Polímeros , Agua , Hidrógeno , Enlace de Hidrógeno , Polímeros/química , Espectrofotometría Infrarroja/métodos , Agua/químicaRESUMEN
A mesogenic metallofoldamer [(1R,R-Ni)2Pd] exhibits thermotropic columnar liquid crystalline properties. The metallofoldamer was prepared from two homochiral crescent-shaped precursors having ß-diketonate ligands (1R,R-Ni) through bridging by metal complexation; it exhibited a single helicity owing to the overlapping of both ends. The precursor and metallofoldamer formed similar hexagonal columnar phases. The helical metallofoldamer exhibited the hexagonal columnar phase at the higher temperature range owing to its rigid helical mesogenic structure.
RESUMEN
Interactions involving intermediate water are crucial for the design of novel blood-compatible materials. Herein, we use a combination of atomic force microscopy, quartz crystal microbalance measurements, and soft X-ray emission spectroscopy to investigate the local hydrogen-bonded configuration of water on blood-compatible poly(2-methoxyethyl acrylate) and non-blood-compatible poly(n-butyl acrylate) grafted on a gold substrate. We find that the initially incorporated water induces polymer-dependent phase separation, facilitating further water uptake. For the blood-compatible polymer, tetrahedrally coordinated water coexists with water adsorbed on CâO groups in low-density regions of the grafted polymer surface, providing a scaffold for the formation of intermediate water. The amount of intermediate water is determined by the type of functional groups, local polymer configuration, and polymer morphology. Thus, blood compatibility is governed by the complex water/polymer interactions.
Asunto(s)
Materiales Biocompatibles , Polímeros , Oro , Propiedades de Superficie , AguaRESUMEN
We analyzed edible potato starch and observed the interaction between its granular structure and water molecules. We studied the changes caused by gelatinization during heating and stirring using microscopy, micro-FT-IR spectroscopy, and X-ray scattering techniques. A wide range of spatial scales was revealed using these various techniques. The rate of gelatinization varied significantly and was dependent on the starch concentration. The process of adsorption of water on starch molecules was studied using the humidity-controlled FT-IR spectroscopy technique. Furthermore, by comparing the X-ray scattering profiles of dry and wet granules, the 9-nm repeat "cluster" structure was studied. A gradual collapse of the granules occurred during the processes of heating and stirring. A clustered smectic structure and a smectic-like structure were observed in the opaque gel after gelatinization. Upon further heating, a transparent gel was obtained after the melting of the cluster.
RESUMEN
The cuticular lipid covering the integument of insects is exposed to the environment and involved in a variety of functions offered by insect body surfaces, ranging from protection against the environment, such as the control of water transpiration, the reduction of abrasive damage, and the prevention of pathogen intrusion, to the communication between insects from intraspecific to interspecific interactions. In comparison with the importance of their physiological functions, there is remarkably little information on the structure and physical property of cuticular lipids on insect body surfaces. The lipid layer on the outer exoskeleton is very thin, estimated on the order of 0.01-1 µm or less, and this has led to a lack of practical methodologies for detailed structural analyses. To fill this devoid, we have exploited the characteristics of Fourier transform infrared (FTIR) attenuated total reflection (ATR) spectroscopy, which allows us to conduct a chemical analysis on insect body surfaces and also to investigate depth-dependent structural changes. We have applied a combination of FTIR ATR microspectroscopy with IR radiation provided by a synchrotron facility to obtain in situ two-dimensional (2D) information of the cuticular lipid layer on the surface of the integument. The 2D FTIR spectra measured on the two-spotted cricket and the American cockroach show that the IR bands due to the cuticular lipid, such as CH2 symmetric and antisymmetric stretch, νa(CH2) and νs(CH2), change in intensity significantly, depending on the location of measurements. As if to keep pace with this, the bands of the amide group for the underlying cuticular layer also change in intensity significantly, although the changes are in the opposite direction; as the lipid bands increase in intensity, the amide band decreases, and vice versa. The ATR spectral analysis, which takes into account the characteristics of the evanescent wave, points out that the lipid layer would vary tens of times in the range of 0.01-1 µm significantly. The νa(CH2) and νs(CH2) bands show frequency shifts, which correlate to some extent with their intensity changes, suggesting that the drastic uneven distribution of the cuticular lipid would be related to the solid-liquid phase separation and also the coarsening of the solid phase domains. The formation of such topological features, significant heterogeneity in the lipid layer thickness, and solid-liquid phase ratios would be accompanied by the partitioning of lipid components according to molecular structures and physicochemical properties. Considering that each lipid component in insect body surface lipids is involved in various physiological roles, the segregation of lipid components during the formation of such heterogeneous structures is thought to have a significant impact on the functionality of the insect body surface.
Asunto(s)
Lípidos , Sincrotrones , Animales , Análisis de Fourier , Insectos , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Low-frequency vibrations of crystalline molecules are very sensitive to the local environment in which the molecules, for example, hydrated ions captured in crystals, find themselves. We present low-temperature X-ray crystallographic measurements on the harvested thiamine crystal containing hydrated ions and its temperature-dependent terahertz spectra and synchrotron infrared microspectra. It is found from the X-ray structure that the hydrated ions and hydration water are in a similar environment to liquid, although those are captured in crystals. The vibrationally resolved THz spectra of two states in the present organic crystals containing hydrated ions are well explained by the difference in the hydrogen-bonded pattern. Peak assignments were performed based on highly accurate first-principles calculations incorporating relativistic effects and dispersion corrections. The temperature dependences are observed for the vibrations around the chloride ions and hydration water due to the loose binding of chloride ions, the bond elongation with increasing temperature, and the cleavage of weak hydrogen bonds.