Seamless Integration of Conducting Hydrogels in Daily Life: From Preparation to Wearable Application.

Conductive hydrogels (CHs) have received significant attention for use in wearable devices because they retain their softness and flexibility while maintaining high conductivity. CHs are well suited for applications in skin-contact electronics and biomedical devices owing to their high biocompatibility and conformality. Although highly conductive hydrogels for smart wearable devices are extensively researched, a detailed summary of the outstanding results of CHs is required for a comprehensive understanding. In this review, the recent progress in the preparation and fabrication of CHs is summarized for smart wearable devices. Improvements in the mechanical, electrical, and functional properties of high-performance wearable devices are also discussed. Furthermore, recent examples of innovative and highly functional devices based on CHs that can be seamlessly integrated into daily lives are reviewed.

Enhancing the mechanical properties of hydrogels with vinyl-functionalized nanocrystalline cellulose as a green crosslinker.

Hydrogels have gained significant attention in scientific communities for their versatile applications, but several challenges need to be addressed to exploit their potential fully. Conventional hydrogels suffer from poor mechanical strength, limiting their use in many applications. Moreover, the crosslinking agents used to produce them are often toxic, carcinogenic, and not bio-friendly. This study presents a novel approach to overcome these limitations by using bio-friendly modified nanocrystalline cellulose as a crosslinker to prepare highly stretchable and tough thermosensitive hydrogels. The surface of nanocrystalline cellulose was modified with 3-methacryloxypropyltrimethoxysilane (MPTS) to obtain modified nanocrystalline cellulose (M-NCC) crosslinker and used during free radical polymerization of thermosensitiveN-isopropyl acrylamide (NIPA) monomer to synthesize NIPA/M-NCC hydrogel. The resulting nanocomposite hydrogels exhibit superior mechanical, thermal, and temperature-responsive swelling properties compared to conventional hydrogels prepared with traditional bi-functionalN,N'-methylene bis (acrylamide) (MBA) as a crosslinker. The elongation at break, tensile strength, and toughness of the NIPA/M-NCC hydrogels significantly increase and Young's modulus decrease than conventional hydrogel. The designed M-NCC crosslinker could be utilized to improve the mechanical strength of any polymeric elastomer or hydrogel systems produced through chain polymerization.

Bio-Inspired Nanomaterials for Micro/Nanodevices: A New Era in Biomedical Applications.

Exploring bio-inspired nanomaterials (BINMs) and incorporating them into micro/nanodevices represent a significant development in biomedical applications. Nanomaterials, engineered to imitate biological structures and processes, exhibit distinctive attributes such as exceptional biocompatibility, multifunctionality, and unparalleled versatility. The utilization of BINMs demonstrates significant potential in diverse domains of biomedical micro/nanodevices, encompassing biosensors, targeted drug delivery systems, and advanced tissue engineering constructs. This article thoroughly examines the development and distinctive attributes of various BINMs, including those originating from proteins, DNA, and biomimetic polymers. Significant attention is directed toward incorporating these entities into micro/nanodevices and the subsequent biomedical ramifications that arise. This review explores biomimicry's structure-function correlations. Synthesis mosaics include bioprocesses, biomolecules, and natural structures. These nanomaterials' interfaces use biomimetic functionalization and geometric adaptations, transforming drug delivery, nanobiosensing, bio-inspired organ-on-chip systems, cancer-on-chip models, wound healing dressing mats, and antimicrobial surfaces. It provides an in-depth analysis of the existing challenges and proposes prospective strategies to improve the efficiency, performance, and reliability of these devices. Furthermore, this study offers a forward-thinking viewpoint highlighting potential avenues for future exploration and advancement. The objective is to effectively utilize and maximize the application of BINMs in the progression of biomedical micro/nanodevices, thereby propelling this rapidly developing field toward its promising future.

Effect of sizes of vinyl modified narrow-dispersed silica cross-linker on the mechanical properties of acrylamide based hydrogel.

Polymeric hydrogel with the incorporation of nano to submicro-meter sized materials forms an exhilarating new generation of composite hydrogels. Most of the applications of hydrogels are in aqueous environments in which they swell to a very high degree. This emanates from low density of the polymer chains, making them highly inferior in terms of physical strength and their prospective applications. In order to address the weak mechanical properties, hydrogels have successfully prepared with high tensile strength and toughness by reinforcing the acrylamide (AAm) network with 3-methacryloxypropyltrimethoxysilane (MPTS) modified silica particles (MSiO2) as chemical cross-linker. The MSiO2 cross-linkers are prepared from narrow-dispersed silica particles (SiO2) of 100 nm, 200 nm, and 300 nm diameters to investigate the effect of cross-linker sizes on the mechanical strengths of hydrogels. The presence of MSiO2 remarkably increases the stretching ability and toughness of hydrogels compared to conventional hydrogels. The tensile strength, toughness, and Young's modulus of the hydrogel decrease from 30 to 11 kPa, 409 to 231 kJ/m3, and 0.16 to 0.11 kPa, respectively, while the SiO2 particle size increase from 100 to 300 nm and the concentration of AAm and MSiO2 (%) are kept constant. The compressive strength and toughness of the hydrogel decrease from 34 to 18 kPa and 6 to 4 kJ/m3, respectively, but the Young's modulus increases from 0.11 to 0.19 kPa. This work is excellent proof of regulating mechanical strength of hydrogel by adjusting the particle size of MSiO2 cross-linkers.

Green Polymer Nanocomposites in Automotive and Packaging Industries.

Green polymer nanocomposites referred to as completely biodegradable, renewable, environmentally friendly, and benign materials, have received a surge of attention to promote sustainable development. Polymer nanocomposites, where nanomaterials are used for reinforcement, possess a large interfacial area per volume, and the intervals between the filler nanoparticles and polymer matrix are significantly short. Molecular interactions between the filler particles and the matrix, therefore, provide polymer nanocomposites with novel characteristics that ordinary polymers or conventional macrocomposites do not possess. However, nanoparticles, nanotubes, nanofilms, nanofibers, nanoflakes, etc., in the form of nanocomposites may cause serious health hazards and pollute the environment severely. While the number of review articles on fundamental and applied research work of polymer nanocomposites is noteworthy, this review focuses more in depth on the applications of safe and green polymer nanocomposites in the automotive and packaging industries. The particular focus has been to examine and investigate in detail the initial and contemporaneous trends, status, and perspectives of green and safe polymer nanocomposites in the automotive and packaging industries. Background characteristics, strengths, weaknesses, potentiality, prospects, and opportunities of green polymer nanocomposites suitable for automotive and packaging industries have been addressed. The ultimate goal is to have a profound understanding of the structure-property relationship of green polymer nanocomposites to overcome existing limitations for automotive and packaging applications.

Rapid diagnosis of COVID-19 via nano-biosensor-implemented biomedical utilization: a systematic review.

The novel human coronavirus pandemic is one of the most significant occurrences in human civilization. The rapid proliferation and mutation of Severe Acute Respiratory Syndrome-Coronavirus 2 (SARS-CoV-2) have created an exceedingly challenging situation throughout the world's healthcare systems ranging from underdeveloped countries to super-developed countries. The disease is generally recognized as coronavirus disease 2019 (COVID-19), and it is caused by a new human CoV, which has put mankind in jeopardy. COVID-19 is death-dealing and affects people of all ages, including the elderly and middle-aged people, children, infants, persons with co-morbidities, and immunocompromised patients. Moreover, multiple SARS-CoV-2 variants have evolved as a result of genetic alteration. Some variants cause severe symptoms in patients, while others cause an unusually high infection rate, and yet others cause extremely severe symptoms as well as a high infection rate. Contrasting with a previous epidemic, COVID-19 is more contagious since the spike protein of SARS-CoV-2 demonstrates profuse affection to angiotensin-converting enzyme II (ACE2) that is copiously expressed on the surface of human lung cells. Since the estimation and tracking of viral loads are essential for determining the infection stage and recovery duration, a quick, accurate, easy, cheap, and versatile diagnostic tool is critical for managing COVID-19, as well as for outbreak control. Currently, Reverse Transcription Polymerase Chain Reaction (RT-PCR) testing is the most often utilized approach for COVID-19 diagnosis, while Computed Tomography (CT) scans of the chest are used to assess the disease's stages. However, the RT-PCR method is non-portable, tedious, and laborious, and the latter is not capable of detecting the preliminary stage of infection. In these circumstances, nano-biosensors can play an important role to deliver point-of-care diagnosis for a variety of disorders including a wide variety of viral infections rapidly, economically, precisely, and accurately. New technologies are being developed to overcome the drawbacks of the current methods. Nano-biosensors comprise bioreceptors with electrochemical, optical, or FET-based transduction for the specific detection of biomarkers. Different types of organic-inorganic nanomaterials have been incorporated for designing, fabricating, and improving the performance and analytical ability of sensors by increasing sensitivity, adsorption, and biocompatibility. The particular focus of this review is to carry out a systematic study of the status and perspectives of synthetic routes for nano-biosensors, including their background, composition, fabrication processes, and prospective applications in the diagnosis of COVID-19.

Analysis of the suspected cancer-causing potassium bromate additive in bread samples available on the market in and around Dhaka City in Bangladesh.

Bread is one of the most popular foods consumed worldwide. It is a very popular foodstuff consumed in almost every house in Bangladesh as breakfast. Bread is prepared predominantly from flour to meet the daily carbohydrate demand and enhances its overall nutrition value using various ingredients. Potassium bromate (KBrO3) is an alluring additive to improve bread quality by bread makers. But due to the well-known toxic and carcinogenic effect, certain levels of KBrO3 residue are not suitable for bread, and it is therefore forbidden in many countries. The key objective of this study is to evaluate the safety status of bread in Dhaka City and its proximity to Bangladesh. Twenty-one randomly collected bread samples were tested in this study from different bakeries or shops in and around Dhaka City. The levels of KBrO3 were analyzed spectrophotometrically, and the maximum concentration found in the bread sample was 9.29 µg/g. A total of 67% of collected bread samples showed elevated levels of KBrO3 relative to the allowable amount prescribed by various Food and Drug Administration worldwide. KBrO3 is toxic to consumers and could endanger their health over continuous regular consumption and thus need to be monitored strictly.

Facile fabrication of polymer network using click chemistry and their computational study.

Click reaction is a very fast, high yield with no by-product, biocompatible, tolerant to surrounded medium, and very specific cycloaddition reaction between azides and alkynes to form triazole. They are widely being employed in the synthesis of various polymeric materials. Here, the design, fabrication and characterization of hydrogel prepared using click reaction have been reported. At first, telechelic acetylene precursor for click reaction is prepared from diisocyanatohexane and propargyl alcohol in the presence of triethylamine. The azide derivatives of poly(hydroxyethylmethacrylate), i.e. poly(HEMA), are successfully prepared following two different routes. In route 1, esterification of bromopropionic acid is performed with HEMA monomer using N,N'-dicyclohexylcarbodiimide/4-dimethylaminopyridine (DCC/DMAP) as a catalyst followed by replacing bromide by azide moiety. Free radical polymerization of the fabricated monomer is then performed under N2 atmosphere using azobisisobutyronitrile (AIBN) as an initiator. In route 2, polymerization of HEMA has been carried out first, then modification of the polymer with azide group via successive steps to obtain azide derivative polymer for click reaction. The hydrogel is prepared by a very fast, highly specific, and simple click reaction between azide derivative polymer and telechelic acetylene precursor using copper as a catalyst. The structures of derivatives of azide-functionalized HEMA, acetylene precursors and hydrogels are confirmed by FTIR and 1H-NMR spectroscopy. The optimized structure of each precursor is determined, and their chemical and thermodynamic parameters are computationally studied in detail.

Role of Ionic Moieties in Hydrogel Networks to Remove Heavy Metal Ions from Water.

A variety of methods for removing heavy metal ions from wastewater have been developed but because of their low efficiency, further production of toxic sludge or other waste materials, high expense, and lengthy procedures, limited progress has been achieved to date. Polymeric hydrogel has been attracting particular attention for the effective removal of heavy metal ions from wastewater. Here, ionogenic polymeric hydrogels were prepared by free-radical copolymerization of a neutral acrylamide (AAm) monomer with an ionic comonomer in the presence of a suitable initiator and a cross-linker. Different types of ionic comonomers such as strongly acidic: 2-acrylamido-2-methylpropane sulfonic acid, weakly acidic: acrylic acid (AAc), and zwitterionic: 2-methacryloyloxy ethyl dimethyl-3-sulfopropyl ammonium hydroxide with varying amounts were incorporated into the poly(AAm) networks to fabricate the hydrogels. The heavy metal ions (Fe3+, Cr3+, and Hg2+) removal capacity of the fabricated hydrogels from an aqueous solution via electrostatic interactions, coordination bond formation, and a diffusion process was compared and contrasted. The poly(AAm) hydrogel containing weakly acidic AAc groups shows excellent removal capacity of heavy metal ions. The release and recovery of heavy metal ions from the hydrogel samples are also impressive. The compressive strength of hydrogels was found to be significantly high after incorporating heavy metal ions that will increase their potential applications in different sectors.

Effects of Plasticizers and Clays on the Physical, Chemical, Mechanical, Thermal, and Morphological Properties of Potato Starch-Based Nanocomposite Films.

Biodegradable polymeric films have great potential as alternatives to synthetic polymeric films to reduce environmental pollution. Plasticizing agents and nanofillers can improve the mechanical properties of polymer-based composites, resulting in materials with better flexibility and extensibility. Starch, a natural polymer, can be produced at low cost and on a large scale from abundant and inexpensive agricultural resources like potatoes. The aim of the present work was to fabricate mechanically strong and thermally stable potato starch films reinforced with different types of plasticizers and nanoclays at different concentrations. Different types of plasticizers such as water, glycerin, ethylene glycol, sorbitol, and formamide and three types of clays such as montmorillonite, hectorite, and kaolinite at various concentrations were used to prepare potato starch-based nanocomposite films. The films were prepared using a very simple solution casting process. The mechanical properties and thermal stabilities of nanocomposite films significantly improved using montmorillonite, hectorite, and kaolinite clays. The water uptake percentage of the fabricated films decreased with addition of plasticizers and further decreased with addition of different types of clays. The structural and morphological changes of the fabricated films in the presence of plasticizers and nanoclays were correlated in detail with their mechanical properties, crystallinity, biodegradability, thermal stability, and water absorption capacities.

Optically transparent, high-toughness elastomer using a polyrotaxane cross-linker as a molecular pulley.

An elastomer is a three-dimensional network with a cross-linked polymer chain that undergoes large deformation with a small external force and returns to its original state when the external force is removed. Because of this hyperelasticity, elastomers are regarded as one of the best candidates for the matrix material of soft robots. However, the comprehensive performance required of matrix materials is a special challenge because improvement of some matrix properties often causes the deterioration of others. For example, an improvement in toughness can be realized by adding a large amount of filler to an elastomer, but to the impairment of optical transparency. Therefore, to produce an elastomer exhibiting optimum properties suitable for the desired purpose, very elaborate, complicated materials are often devised. Here, we have succeeded in creating an optically transparent, easily fabricated elastomer with good extensibility and high toughness by using a polyrotaxane (PR) composed of cyclic molecules and a linear polymer as a cross-linking agent. In general, elastomers having conventional cross-linked structures are susceptible to breakage as a result of loss of extensibility at high cross-linking density. We found that the toughness of the transparent elastomer prepared using the PR cross-linking agent is enhanced along with its Young's modulus as cross-linking density is increased.

Fabrication of mechanically improved hydrogels using a movable cross-linker based on vinyl modified polyrotaxane.

This manuscript describes the preparation of new slide-ring gels by using a polyrotaxane as a cross-linker.