RESUMEN
This study addresses the widespread use of UV filters (UVFs) in cosmetic and solar products due to the negative effects of UV radiation, particularly in relation to melanoma risk. While these filters offer protection, their extensive application raises concerns about their environmental and health impacts. Organic UVFs, in particular, have been associated with endocrine disruption in aquatic species and coral reef damage. To mitigate these concerns, regulatory limits have been imposed on certain UVFs. Current analytical techniques for UVF determination, such as HPLC-PDA and HPLC-MS/MS, offer high accuracy but are expensive and lack on-site monitoring capabilities. In response, this research aims to develop a rapid and cost-effective method, utilizing voltammetry for organic UVF quantification in complex matrices like sunscreens. Additionally, HPLC-PDA and HPLC-MS/MS are employed for electrochemical methods and device validation. This approach not only addresses the need for efficient UVF analysis but also provides a basis for regulatory compliance and environmental stewardship in the cosmetics industry.
RESUMEN
Iron, a crucial element in our environment, plays a vital role in numerous natural processes. Understanding the presence and concentration of iron in the environment is very important as it impacts various aspects of our planet's health. The on-site detection and speciation of iron are significant for several reasons. In this context, the present work aims to evaluate the applicability of voltammetry for the on-site determination of iron and its possible speciation using a portable voltammetric analyzer. Voltammetry offers the advantage of convenience and cost-effectiveness. For iron (III) determination, the modification of a glassy carbon electrode (GCE) with an antimony-bismuth film (SbBiFE) using the acetate buffer (pH = 4) as a supporting electrolyte was used. The technique adopted was Square Wave Adsoptive Cathodic Stripping Voltammetry (SW-AdCSV), and we used 1-(2-piridylazo)-2-naphthol (PAN) as the iron (III) ligand. Linearity, repeatability, detection limit, and accuracy were determined using synthetic solutions; then, a Standard Reference Material (SRM) of 1643f Trace Elements in Water (iron content: 93.44 ± 0.78 µg L-1) was used for validation measurements in the real matrix. the accuracy of this technique was found to be excellent since we obtained a recovery of 103.16%. The procedure was finally applied to real samples (tap, lake, and seawater), and the results obtained were compared via Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES). The amount of iron found was 207.8 ± 6.6 µg L-1 for tap water using voltammetry and 200.9 ± 1.5 µg L-1 with ICP-OES. For lake water, 171.7 ± 3.8 µg L-1, 169.8 ± 4.1 µg L-1, and 187.5 ± 5.7 µg L-1 were found using voltammetry in the lab both on-site and using ICP-OES, respectively. The results obtained demonstrate the excellent applicability of the proposed on-site voltammetric procedure for the determination of iron and its speciation in water.
RESUMEN
Mercury (Hg) and its compounds are highly toxic for humans and ecosystems, and their chemical forms determine both their behavior and transportation as well as their potential toxicity for human beings. Determining the various species of an element is therefore more crucial than understanding its overall concentration in samples. For this reason, several studies focus on the development of new analytical techniques for the identification, characterization, and quantification of Hg compounds. Commercially available, hyphenated technology, such as HPLC-ICP-MS, supports the rapid growth of speciation analysis. This review aims to summarize and critically examine different approaches for the quantification of mercury species in different samples using HPLC-ICP-MS. The steps preceding the quantification of the analyte, namely sampling and pretreatment, will also be addressed. The scenarios evaluated comprehend single and multi-element speciation analysis to create a complete guide about mercury content quantification.
RESUMEN
The electronic properties of a charge-transfer (donor-acceptor) semiconducting organic co-crystal, Perylene:F4-TCNQ (PE:F4) (the donor, D, is PE and the acceptor, A, is 2,3,5,6-tetrafluoro-7,7,8,8 tetracyanoquinodimethane (F4)) in its 3 : 2 stoichiometry, are experimentally and theoretically studied. This is performed by means of electron paramagnetic resonance (EPR) and solid state electrochemical techniques, such as cyclic voltammetry (CV) measurements on single crystals. In particular, solid state electrochemistry proves to be an effective tool to probe, on a macroscopic scale, the electronic characteristics of the co-crystal. However, EPR highlights the presence of spin ½ radicals localized on F4 molecules, possibly linked to defects. The experimental findings are discussed on the basis of density functional theory (DFT) based calculations, carried out using both the projector augmented wave (PAW), with "periodic boundary conditions" (pbc), method and the localized orbitals, molecular cluster, approach. In particular, a satisfying agreement is found between the experimental, 0.336 eV (electrochemical), and theoretical, 0.303 eV (PAW), band gaps. Differences with the reported optical bandgap are discussed considering excitonic effects.
RESUMEN
A measurement and speciation procedure for the determination of total mercury (HgTOT), inorganic mercury (HgIN), and methylmercury (CH3Hg) was developed and the applicability for on-site determination was demonstrated. A simple, portable sample pretreatment procedure was optimized to extract the analytes. Home-made columns, packed with a new sorbent material called CYXAD (CYPHOS 101 modified Amberlite XAD), were used to separate the two forms of the analyte. HgTOT and CH3Hg were determined by anodic stripping voltammetry (ASV), using a solid gold electrode (SGE). Two certified reference materials (BCR-463 Tuna Fish and Tuna Fish ERM-CE 464) and eight fresh fishes were analyzed. Then, the results that were obtained following the optimized portable procedure were compared with the concentrations obtained, using a direct mercury analyzer (DMA). This quantification, using the two techniques, demonstrated the good performance of the proposed method.
Asunto(s)
Mercurio , Compuestos de Metilmercurio , Animales , Peces , Extracción en Fase Sólida , AtúnRESUMEN
The determination of the authenticity of extra virgin olive oils (EVOOs) has become more interesting in recent years. Italy is the first country in Europe in terms of number of Protected Designation of Origin (PDO) oils, which connects consumers to a feeling of tradition and thus to higher quality standards. This work focused on the consideration of the inorganic content as a possible marker of EVOOs. Ten vegetable oils (VOs), eight Italian EVOOs and seven not Italian EVOOs were analyzed. After pretreatment by acid mineralization, Al, Ba, Ca, Cu, Fe, K, Li, Mg, Mn, Na, P, Sb, Se and Zn were determined by ICP-OES. The electrochemical properties of a selected group of EVOOs and other vegetal oils of different botanical origin were investigated by voltammetry. Carbon paste electrodes (CPEs) were prepared. The features observed in the voltammograms reflect the reactions of electroactive compounds, which are present in the oils. A chemometric treatment of the results was performed to assess the possibility to distinguish (i) the region of provenience considering the inorganic profile; and (ii) the plant species from which each oil was obtained on the basis of the current profile registered during voltammetric analysis. Inorganic composition seems to be a useful marker for the assessment of the geographical origin of an EVOO. The EVOO-CPEs voltammetry seems to have a good ability to distinguish the plant species of origin. This method could be useful to monitor the conservation status of the oils, as the redox profile is linked to the oxidative degradation state.
Asunto(s)
Aceites de Plantas , Aceites de Plantas/química , Aceite de Oliva/química , Italia , Europa (Continente)RESUMEN
A portable measurement and speciation procedure for inorganic mercury (HgIN) and methylmercury (CH3Hg) was developed. A portable sample pretreatment was optimized to determine total mercury content. A new home-made sorbent (CYXAD, CHYPOS 101 modified Amberlite XAD), was prepared to separate HgIN and CH3Hg. Mercury species were determined using square wave anodic stripping voltammetry (SW-ASV) with a solid gold electrode (SGE) and using a portable potentiostat. A certified reference material, five freeze-dried samples and three fresh samples were analysed with conventional voltammetric analyzer, after dissolution of the samples in microwave oven, and with a portable potentiostat after the mild eating procedure. The results obtained by SW-ASV were compared with those obtained using Direct Mercury Analyser (DMA). The quantification with the portable method is comparable to that obtained with the DMA. Retention tests showed the selectivity of CYXAD for HgIN, its stability and the possibility to re-use the same aliquot of resin.
Asunto(s)
Electroquímica/instrumentación , Mercurio/análisis , Compuestos de Metilmercurio/análisis , Electrodos , Oro/químicaRESUMEN
In this work, a two-step sequential extraction scheme for the determination of trace elements in Arctic PM10 samples was optimized by using two certified reference materials (CRMs). By means of an experimental design for qualitative variables, the five most common extracting solutions for particulate matter (PM) sequential extraction (high purity water (HPW), 0.032 M HNO3, 0.022 M HCl, 0.11 M CH3COOH, and 0.012 M CH3COOH/CH3COONH4 buffer) and two different extraction methods (stirring and ultrasounds) were compared. The purpose of the study was the identification of the procedure which gives the best estimation of the anthropogenic portion of the elements present in PM10 samples. The use of ultrasounds instead of stirring induced a low but significant decrease of the extraction of all the elements and a decrease in the repeatability of the procedure. Diluted HNO3 was the extractant which allowed to maximize the extraction of anthropogenic elements (As, Cd, Pb, Zn) with respect to crustal ones (Al, Si, Ti). The optimized procedure proved successful in avoiding contaminations and, therefore, suitable to be applied to PM samples having extremely low concentrations, such as samples collected in polar or other remote areas. The chosen procedure was applied to ten Arctic PM10 samples, allowing for a better identification of their sources. Indeed, it was possible to hypothesize that even though the concentrations of As, Cd, K, Mg, Mn, and Ni in spring and summer were different, their mobility and, therefore, their chemical form in the analyzed PM10 samples were probably similar. Graphical abstract.
RESUMEN
The inorganic component of hazelnuts was considered as a possible marker for geographical allocation and for the assessment of technological impact on their quality. The analyzed samples were Italian hazelnuts of the cultivar Tonda Gentile Romana and Turkish hazelnuts of the cultivars Tombul, Palaz and Çakildak. The hazelnuts were subjected to different drying procedures and different conservative methods. The concentration of 13 elements, namely Ba, Ca, Cu, Fe, K, Mg, Mn, Na, Ni, P, Sn, Sr and Zn, were quantified by inductively coupled plasma optical emission spectroscopy (ICP-OES). All the samples were previously digested in a microwave oven. Before proceeding with the analysis of the samples, the whole procedure was optimized and tested on a certified reference material. The results show that the inorganic component: (i) can represent a fingerprint, able to identify the geographical origin of hazelnuts, becoming an important quality marker for consumer protection; (ii) is strongly influenced by the treatments undergone by the investigated product during all the processing stages. A pilot study was also carried out on hazelnuts of the cultivar Tonda Gentile Trilobata Piemontese, directly harvested from the plant during early development to maturity and analyzed to monitor the element concentration over time.