RESUMEN
Since two-dimensionalal (2D) materials have distinct chemical and physical properties, they are widely used in various sectors of modern technologies. In the domain of diagnostic biodevices, particularly for point-of-care (PoC) biomedical diagnostics, 2D-based field-effect transistor biosensors (bio-FETs) demonstrate substantial potential. Here, in this review article, the operational mechanisms and detection capabilities of biosensing devices utilizing graphene, transition metal dichalcogenides (TMDCs), black phosphorus, and other 2D materials are addressed in detail. The incorporation of these materials into FET-based biosensors offers significant advantages, including low detection limits (LOD), real-time monitoring, label-free diagnosis, and exceptional selectivity. The review also highlights the diverse applications of these biosensors, ranging from conventional to wearable devices, underscoring the versatility of 2D material-based FET devices. Additionally, the review provides a comprehensive assessment of the limitations and challenges faced by these devices, along with insights into future prospects and advancements. Notably, a detailed comparison of FET-based biosensors is tabulated along with various other biosensing platforms and their working mechanisms. Ultimately, this review aims to stimulate further research and innovation in this field while educating the scientific community about the latest advancements in 2D materials-based biosensors.
Asunto(s)
Técnicas Biosensibles , Sistemas de Atención de Punto , Técnicas Biosensibles/métodos , Técnicas Biosensibles/instrumentación , Humanos , Transistores Electrónicos , Grafito/química , Diseño de EquipoRESUMEN
Hybrid supercapacitors can produce extraordinary advances in specific power and energy to display better electrochemical performance and better cyclic stability. Amalgamating metal oxides with metal-organic frameworks endows the prepared composites with unique properties and advantageous possibilities for enhancing the electrochemical capabilities. The present study focused on the synergistic effects of the CuCo(5-NIPA)-Nd2O3 composite. Employing a half-cell configuration, we conducted a comprehensive electrochemical analysis of CuCo(5-NIPA), Nd2O3, and their composite. Owing to the best performance of the composite, the hybrid device prepared from CuCo(5-NIPA)-Nd2O3 and activated carbon demonstrated a specific capacity of 467.5 C g-1 at a scan rate of 3 mV s-1, as well as a phenomenal energy and power density of 109.68 W h kg-1 and 4507 W kg-1, respectively. Afterwards, semi-empirical techniques and models were used to investigate the capacitive and diffusive mechanisms, providing important insights into the unique properties of battery-supercapacitor hybrids. These findings highlight the enhanced performance of the CuCo(5-NIPA)-Nd2O3 composite, establishing it as a unique and intriguing candidate for applications requiring the merging of battery and supercapacitor technologies.
RESUMEN
The development of electrode materials with extraordinary energy densities or high power densities has experienced a spectacular upsurge because of significant advances in energy storage technology. In recent years, the family of metal-organic frameworks (MOFs) has become an essential contender for electrode materials. Herein, two cobalt-based MOFs are synthesized with distinct linkers named 1,2,4,5-benzene-tetra-carboxylic acid (BTCA) and 1,2,3,4-cyclopentane-tetracarboxylic acid (CPTC). Investigations have been rigorously conducted to fully understand the effect of linkers on the electrochemical properties of Co-based MOFs. The best sample among the MOFs was used with activated carbon to create a battery-supercapacitor hybrid device. Due to its noteworthy results, specific capacity (100.3 C g-1), energy density (23 W h kg-1), power density (3400 W kg-1) and with the lowest ESR value of 0.4 Ω as well as its 95.4% capacity retention, the fabricated hybrid device was discovered to be very appealing for applications demanding energy storage. An approach for evaluating battery-supercapacitors was employed by quantifying the capacitive and diffusive contributions using Dunn's model to reflect the bulk and surface processes occurring during charge storage. This study fills the gap between supercapacitors and batteries, as well as providing a roadmap for creating a new generation of energy storage technologies with improved features.
RESUMEN
Efficient energy storage and conversion is crucial for a sustainable society. Battery-supercapacitor hybrid energy storage devices offer a promising solution, bridging the gap between traditional batteries and supercapacitors. In this regard, metal-organic frameworks (MOFs) have emerged as the most versatile functional compounds owing to their captivating structural features, unique properties, and extensive diversity of applications in energy storage. MOF properties are governed by the structure and topological characteristics, which are influenced by the types of ligands and metal nodes. Herein, MOFs based on pyridine 3,5-dicarboxylate (PYDC) ligand in combination with copper and cobalt are electrochemically analyzed. Owing to the promising initial characterization of Cu-PYDC-MOF, a battery supercapacitor hybrid device was fabricated, comprising Cu-PYDC-MOF and activated carbon (AC) electrodes. The device showcased energy and power density of 17 W h kg -1 and 2550 W kg -1, respectively. Dunn's model was employed to gain deeper insights into the capacitive and diffusive contributions of the device. With their performance and versatility, the PYDC-based MOFs stand at the forefront of energy technology, ready to power a brighter future for upcoming generations.
RESUMEN
Dye-sensitized solar cells (DSSCs) have attracted much attention as promising tools in renewable energy conversion technology. This is mainly because of their beneficial qualities, such as their impressive efficiency levels and low-cost fabrication techniques. An overview of MXene-modified electrodes in DSSCs is given in this review article. MXenes are two-dimensional (2D) transition metal carbides or nitrides with remarkable properties such as high conductivity and large surface area. MXenes' properties make them an appealing material for various applications, including energy storage, catalysis, and electronic devices. MXene integration enhances ion transport, dye adsorption, and charge transport in DSSC electrodes. In-depth analysis of the use of 2D Mxene and integration with carbon nanotubes (CNTs), reduced graphene oxide (rGO), 2D MoS2, and hybrids like 2D-2D heterostructures for electrode modification in photovoltaics (PVs), including anodes, photoanodes, composite decorated electrodes, counter electrodes (CEs), and electrolytes, is provided in this review article. The effects on the performance metrics of various deposition techniques are discussed and assessed. The use of MXene-modified electrodes in DSSCs suggests potential for enhancing the performance and efficiency of these solar cells in general. The article examines this strategy's potential advantages and implications, illuminating the fascinating advancements in the area and emphasizing MXenes' potential as a valuable substance for renewable energy applications. We also discuss the difficulties and potential benefits of using MXene-modified electrodes in DSSCs and emphasize the need for additional study to enhance stability, optimize MXene integration techniques, and enhance long-term device performance. The scalability and potential of MXene-based electrode modifications for commercial applications are also covered, addressing issues and prospects for the future, focusing on the necessity of more study. Electrodes modified with MXenes can improve DSSC performance and advance sustainable energy conversion.
RESUMEN
In future solar cell technologies, the thermodynamic Shockley-Queisser limit for solar-to-current conversion in traditional p-n junctions could potentially be overcome with a bulk photovoltaic effect by creating an inversion broken symmetry in piezoelectric or ferroelectric materials. Here, we unveiled mechanical distortion-induced bulk photovoltaic behavior in a two-dimensional (2D) material, MoTe2, caused by the phase transition and broken inversion symmetry in MoTe2. The phase transition from single-crystalline semiconducting 2H-MoTe2 to semimetallic 1T'-MoTe2 was confirmed using X-ray photoelectron spectroscopy (XPS). We used a micrometer-scale system to measure the absorption of energy, which reduced from 800 to 63 meV during phase transformation from hexagonal to distorted octahedral and revealed a smaller bandgap semimetallic behavior. Experimentally, a large bulk photovoltaic response is anticipated with the maximum photovoltage VOC = 16 mV and a positive signal of the ISC = 60 µA (400 nm, 90.4 Wcm-2) in the absence of an external electric field. The maximum values of both R and EQE were found to be 98 mAW-1 and 30%, respectively. Our findings are distinctive features of the photocurrent responses caused by in-plane polarity and its potential from a wide pool of established TMD-based nanomaterials and a cutting-edge approach to optimize the efficiency in converting photons-to-electricity for power harvesting optoelectronics devices.
RESUMEN
In the pursuit of developing superior energy storage devices, an integrated approach has been advocated to harness the desirable features of both batteries and supercapacitors, particularly their high energy density, and high-power density. Consequently, the emergence of hybrid supercapacitors has become a subject of increasing interest, as they offer the potential to merge the complementary attributes of these two technologies into a single device, thereby surpassing the limitations of conventional energy storage systems. In this context the Metal-Organic Frameworks (MOFs), consisting of metal centers and organic linkers, have emerged as highly trending materials for energy storage by virtue of their high porosity. Here, we investigate the electrochemical performance of cobalt-pyridine-3,5-di-carboxylate-MOF (Co-PDC-MOF) and cobalt-1,2,3,4-cyclopentane tetra-carboxylate-MOF (Co-CPTC-MOF). In the setup involving the analysis of Co-PDC-MOF and Co-CPTC-MOF materials, a configuration comprising three electrodes was utilized. Drawing upon the promising initial properties of CPTC, a battery device was fabricated, comprising Co-CPTC-MOF, and activated carbon (AC) electrodes. Retaining a reversible capacity of 97% the device showcased impressive energy and power density of 20.7 W h g-1 and 2608.5 W kg-1, respectively. Dunn's model was employed, to gain deeper insights into the capacitive and diffusive contributions of the device.
RESUMEN
Electrochemical energy storage devices run on two fundamentally different processes: charge storage across the double layer and redox reactions. A satisfactory understanding of the underlying mechanism is only possible once the two contributions are deconvoluted. The b-value and the ν -ν1/2 model are two familiar steps undertaken to separate these contributions but as it is shown here both metrics are flawed, prone to misinterpretation, frequently invoked without attention to their limitations, and in need of re-examination. After exploring these flaws through the lens of a diverse set of cyclic voltammetry data we opine that use of the b-value be discouraged on account of subjectivity inherent to the metric, and the ν -ν1/2 model be replaced by the one proposed here. This new model ultimately reduces the root mean square error significantly and provides a robust tool for the evaluation of energy storage devices.
RESUMEN
Transition metal dichalcogenides (TMDCs) have been explored in recent years to utilize in electronics due to their remarkable properties. This study reports the enhanced energy storage performance of tungsten disulfide (WS2) by introducing the conductive interfacial layer of Ag between the substrate and active material (WS2). The interfacial layers and WS2 were deposited through a binder free method of magnetron sputtering and three different prepared samples (WS2 and Ag-WS2) were scrutinize via electrochemical measurements. A hybrid supercapacitor was fabricated using Ag-WS2 and activated carbon (AC) since Ag-WS2 was observed to be the most proficient of all three samples. The Ag-WS2//AC devices have attained a specific capacity (Qs) of 224 C g-1, while delivering the maximum specific energy (Es) and specific power (Ps) of 50 W h kg-1 and 4003 W kg-1, respectively. The device was found to be stable enough as it retains 89% capacity and 97% coulombic efficiency after 1000 cycles. Additionally, the capacitive and diffusive currents were obtained through Dunn's model to observe the underlying charging phenomenon at each scan rate.
RESUMEN
The layered structures of tungsten disulfide (WS2) and molybdenum tungsten disulfide (MoWS2) are considered as the most promising electrode materials for energy storage devices. Herein, MS (magnetron sputtering) is required for the deposition of WS2 and MoWS2 on the surface of the current collector to attain an optimized layer thickness. The structural morphology and topological behavior of the sputtered material were examined via X-ray diffraction and atomic force microscopy. Three-electrode assembly was used to start the electrochemical investigations to identify the most optimal and effective sample among WS2 and MoWS2. CV (cyclic voltammetry), GCD (galvanostatic charging discharging), and EIS (electro-impedance spectroscopy) techniques were employed to analyze the samples. After preparing WS2 with optimized thickness as the superior performing sample, a hybrid device was designed as WS2//AC (activated carbon). With a remarkable cyclic stability of 97% after 3000 continuous cycles, the hybrid supercapacitor generated a maximum energy density (Es) value of 42.5 W h kg-1 and 4250 W kg-1 of power density (Ps). Besides, the capacitive and diffusive contribution during the charge-discharge process and b-values were calculated by Dunn's model, which lay in the 0.5-1.0 range and the fabricated WS2 hybrid device was found to have a hybrid nature. The outstanding outcomes of WS2//AC make it suitable for future energy storage applications.
RESUMEN
Metal-organic frameworks are a complex of metal nodes and organic ligands that have attracted widespread interest in technological applications owing to their diverse characteristics. Bi-linker MOFs can prove to be more conductive and efficient than the mono-linker MOFs, however, they have been investigated less often. In this current study two distinct organic ligands i.e., 1,2,4,5-benzene-tetra-carboxylic acid and pyridine-3,5-dicarboxylic acid were used to synthesize a bi-linker nickel MOF. The obtained Ni-P-H MOF having a unique construction was examined for its structural, morphological, and electrochemical properties. To the best of our knowledge, for the first time its potential use was specifically explored as a component in hybrid supercapacitors, as it has not been previously reported for such applications. In standard three-electrode assembly, the electrochemical properties of the Ni-P-H MOF were examined, followed by the fabrication of a Ni-P-H MOF hybrid supercapacitor with activated carbon. This hybridization results in a device with both high energy and power density, making it suitable for a variety of practical applications. To further understand the behavior of this hybrid supercapacitor, a semi-empirical technique was implemented employing Dunn's model. This model allows for the extraction of regression parameters and the quantification of the diffusive/capacitive contributions of the two-cell assembly. Overall, the combination of Ni-PMA-H2pdc MOF//activated carbon in a hybrid supercapacitor holds great potential for advancements in energy storage technology.
RESUMEN
Two-dimensional (2D) van der Waals (vdW) heterostructured transition metal dichalcogenides (TMDs) open up new possibilities for a wide range of optoelectronic applications. Interlayer couplings are responsible for several fascinating physics phenomena, which are in addition to the multifunctionalities that have been discovered in the field of optoelectronics. These couplings can influence the overall charge, or the energy transfer processes via stacking, separation, and dielectric angles. This focused review article summarizes the most recent and promising strategies for interlayer exciton emission in 2D or integrated perovskites and TMD heterostructures. These types of devices require a thorough comprehension and effective control of interlayer couplings in order to realize their functionalities and improve performance, which is demonstrated in this article with the energy or charge transfer mechanisms in the individual devices. An ideal platform for examining the interlayer coupling and the related physical processes is provided by a summary of the recent research findings in 2D perovskites and TMDs. Furthermore, it would encourage more investigation into the comprehension and regulation of excitonic effects and the related optoelectronic applications in vdW heterostructures over a broad spectral response range. Finally, the current challenges and prospects are summarized in this paper.
RESUMEN
Metal-organic frameworks (MOFs) have emerged as intriguing porous materials with diverse potential applications. Herein, we synthesized a copper-based MOF (MOF-199) and investigated its use in energy storage applications. Methods were adapted to intensify the electrochemical characteristics of MOF-199 by preparing composites with graphene and polyaniline (PANI). The specific capacity of the synthesized MOF in a three-electrode assembly was significantly enhanced from 88 C g-1 to 475 C g-1 and 766 C g-1 with the addition of graphene and polyaniline (PANI), respectively. Due to the superior performance of (MOF-199)/PANI, a hybrid supercapacitor was fabricated with the structure of (MOF-199)/PANI//activated carbon, which displayed an excellent maximum energy and power density of 64 W h kg-1 and 7200 W kg-1, respectively. The hybrid device exhibited an appreciable capacity retention of 92% after 1000 charge-discharge cycles. Moreover, using Dunn's model, the capacitive and diffusive contributions as well as the k 1 and k 2 currents of the fabricated device were calculated, validating the hybrid nature of the supercapattery device. The current studies showed that MOF-199 exhibits promising electrochemical features and can be considered as potential electrode material for hybrid energy storage devices.
RESUMEN
Two-dimensional (2D) layered semiconductors are appealing materials for high-specific-power photovoltaic systems due to their unique optoelectronic properties. The 2D materials can be naturally thin, and their properties can be altered in a variety of ways. Therefore, these materials may be used to develop high-performance opto-spintronic and photovoltaic devices. The most recent and promising strategies were used to induce circular photo-galvanic effects (CPGEs) in 2D TMD materials with broken inversion symmetry. The majority of quantum devices were manufactured by mechanical exfoliation to investigate the electrical behavior of ultrathin 2D materials. The investigation of CPGEs in 2D materials could enable the exploration of spin-polarized optoelectronics to produce more energy-efficient computing systems. The current research on nanomaterial-based materials paves the way for developing materials to store, manipulate, and transmit information with better performance. Finally, this study concludes by summarizing the current challenges and prospects.
RESUMEN
Transition metal dichalcogenides (TMDs) van der Waals (vdW) 1D heterostructures are recently synthesized from 2D nanosheets, which open up new opportunities for potential applications in electronic and optoelectronic devices. The most recent and promising strategies in regards to forming 1D TMDs nanotubes (NTs) or nanoscrolls (NSs) in this review article as well as their heterostructures that are produced from 2D TMDs are summarized. In order to improve the functionality of ultrathin 1D TMDs that are coaxially combined with boron nitride nanotubes and single-walled carbon nanotubes. 1D heterostructured devices perform better than 2D TMD nanosheets when the two devices are compared. The photovoltaic effect in WS2 or MoS2 NTs without a junction may exceed the Shockley-Queisser limit for the above-band-gap photovoltage generation. Photoelectrochemical hydrogen evolution is accelerated when monolayer WS2 or MoS2 NSs are incorporated into a heterojunction. In addition, the photovoltaic performance of the WSe2 /MoS2 NSs junction is superior to that of the performance of MoS2 NSs. The summary of the current research about 1D TMDs can be used in a variety of ways, which assists in the development of new types of nanoscale optoelectronic devices. Finally, it also summarizes the current challenges and prospects.
RESUMEN
Transition metal dichalcogenides (TMDs) have received significant attention owing to their thickness-dependent folded current-voltage (I ds-V ds) characteristics, which offer various threshold voltage values. Owing to these astonishing characteristics, TMDs based negative differential resistance (NDR) devices are preferred for the realization of multi-valued logic applications. In this study, an innovative and ground-breaking germanium selenide/hafnium disulfide (p-GeSe/n-HfS2) TMDs van der Waals heterostructure (vdWH) NDR device is designed. An extraordinary peak-to-valley current ratio (≈5.8) was estimated at room temperature and was used to explain the tunneling and diffusion currents by using the tunneling mechanism. In addition, the p-GeSe/n-HfS2 vdWH diode was used as a ternary inverter. The TMD vdWH diode, which can exhibit different band alignments, is a step forward on the road to developing high-performance multifunctional devices in electronics.
RESUMEN
Two-dimensional transition-metal dichalcogenide (2D-TMD) semiconductors and their van der Waals heterostructures (vdWHs) have attracted great attention because of their tailorable band-engineering properties and provide a propitious platform for next-generation extraordinary performance energy-harvesting devices. Herein, we reported unique and unreported germanium selenide/rhenium diselenide (p-GeSe/n-ReSe2) 2D-TMD vdWH photodetectors for extremely sensitive and high-performance photodetection in the broadband spectral range (visible and near-infrared range). A high and gate-tunable rectification ratio (RR) of 7.34 × 105 is achieved, stemming from the low Schottky barrier contacts and sharp interfaces of the p-GeSe/n-ReSe2 2D-TMD vdWHs. In addition, a noticeably high responsivity (R = 2.89 × 105 A/W) and specific detectivity (D* = 4.91 × 1013 Jones), with good external quantum efficiency (EQE = 6.1 × 105) are obtained because of intralayer and interlayer transition of excitations, enabling the broadband photoresponse (λ = 532-1550 nm) at room temperature. Furthermore, fast response times of 16-20 µs are estimated under the irradiated laser of λ = 1550 nm because of interlayer exciton transition. Such a TMD-based compact system offers an opportunity for the realization of high-performance broadband infrared photodetectors.
RESUMEN
The Fermi level alignment between electrodes and two-dimensional (2D) materials is significant in characterizing sensors based on their reversibility, response time, sensitivity, and long-term stability. Here, we have demonstrated that the modulation of the Schottky barrier height between the interface of metal (Pd/Au) and multilayered ReSe2 nanoflakes caused the change in the transfer curve (Ids-Vbg) of FETs based devices and rectifying characteristics (Ids-Vds) of the Schottky diodes at various hydrogen concentrations at T = 22 °C, fluctuating from 50 to 350 ppm with a response (R%) from 669 to 1198%, respectively. Sensors based on a mono- or bilayer system did not exhibit sensitivity to hydrogen gas owing to metal electrodes diffused into materials. The value of the ideality factor of the Schottky diode-based sensor changed from 4 to 1.6 as the hydrogen concentration was changed from 50 to 900 ppm, while the relative response increased from 0 to 3.5 as the hydrogen concentration was increased from 0 to 900 ppm. This research can offer a real solution for developing cost-effective, faster, and room temperature sensors based on 2D materials.
RESUMEN
Recently, van der Waals heterostructures (vdWHs) based on transition-metal dichalcogenides (TMDs) have attracted significant attention owing to their superior capabilities and multiple functionalities. Herein, a novel vdWH field-effect transistor (FET) composed of molybdenum ditelluride (MoTe2 ) and palladium diselenide (PdSe2 ) is studied for highly sensitive photodetection performance in the broad visible and near-infrared (VNIR) region. A high rectification ratio of 6.3 × 105 is obtained, stemming from the sharp interface and low Schottky barriers of the MoTe2 /PdSe2 vdWHs. It is also successfully demonstrated that the vdWH FET exhibits highly sensitive photo-detecting abilities, such as noticeably high photoresponsivity (1.24 × 105 A W-1 ), specific detectivity (2.42 × 1014 Jones), and good external quantum efficiency (3.5 × 106 ), not only due to the intra-TMD band-to-band transition but also due to the inter-TMD charge transfer (CT) transition. Further, rapid rise (16.1 µs) and decay (31.1 µs) times are obtained under incident light with a wavelength of 2000 nm due to the CT transition, representing an outcome one order of magnitude faster than values currently in the literature. Such TMD-based vdWH FETs would improve the photo-gating characteristics and provide a platform for the realization of a highly sensitive photodetector in the broad VNIR region.