Pseudo-refractive index and excitonic features of single layer CdSe/CdS core-shell nanoplatelet films.

Semiconductor CdSe/CdS core-shell nanoplatelets exhibit narrow and intense absorption and photoluminescence spectra in the visible range, which makes them suitable for numerous applications in optoelectronics. Of particular interest is the preparation and optical characterization of thin films with an accurately controlled amount of nanoplatelets. Here we report on the use of spectroscopic ellipsometry for investigating the optical properties of ultrathin films composed of a single layer of negatively charged CdSe/CdS core-shell nanoplatelets prepared by the electrostatic layer-by-layer deposition on SiO2/Si substrates. Combining the ellipsometric spectra with atomic force microscopy measurements, we were able to infer the nanoplatelet film extinction spectra which was found to exhibit the two characteristic exciton peaks albeit blueshifted relative to the colloidal nanoplatelets.

Publisher Correction: Tamm plasmon modes on semi-infinite metallodielectric superlattices.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.

Tamm plasmon modes on semi-infinite metallodielectric superlattices.

We analyze the fundamental properties of optical waves referred to as Tamm plasmon modes (TPMs) which are tied to the interface of a semi-infinite two-phase metallodielectric superlattice with an arbitrary homogeneous capping medium. Such modes offer new ways of achieving high electromagnetic field localization and spontaneous emission enhancement in the vicinity of the interface in conjunction with absorption loss management, which is crucial for future applications. The homointerface, formed when the capping medium has the same permittivity as one of the superlattice constituents, is found to support a TPM whose dispersion overlaps the single-interface surface plasmon polariton (SPP) dispersion but which has a cut off at the topological transition point. In contrast, a heterointerface formed for an arbitrary capping medium, is found to support multiple TPMs whose origin can be traced by considering the interaction between a single-interface SPP and the homointerface TPM burried under the top layer of the superlattice. By carrying out a systematic comparison between TPMs and single-interface SPPs, we find that the deviations are most pronounced in the vicinity of the transition frequency for superlattices in which dielectric layers are thicker than metallic ones.

Electrically tunable terahertz polarization converter based on overcoupled metal-isolator-metal metamaterials infiltrated with liquid crystals.

Large birefringence and its electrical modulation by means of Fréedericksz transition makes nematic liquid crystals (LCs) a promising platform for tunable terahertz (THz) devices. The thickness of standard LC cells is in the order of the wavelength, requiring high driving voltages and allowing only a very slow modulation at THz frequencies. Here, we first present the concept of overcoupled metal-isolator-metal (MIM) cavities that allow for achieving simultaneously both very high phase difference between orthogonal electric field components and large reflectance. We then apply this concept to LC-infiltrated MIM-based metamaterials aiming at the design of electrically tunable THz polarization converters. The optimal operation in the overcoupled regime is provided by properly selecting the thickness of the LC cell. Instead of the LC natural birefringence, the polarization-dependent functionality stems from the optical anisotropy of ultrathin and deeply subwavelength MIM structures. The dynamic electro-optic control of the LC refractive index enables the spectral shift of the resonant mode and, consequently, the tuning of the phase difference between the two orthogonal field components. This tunability is further enhanced by the large confinement of the resonant electromagnetic fields within the MIM cavity. We show that for an appropriately chosen linearly polarized incident field, the polarization state of the reflected field at the target operation frequency can be continuously swept between the north and south pole of the Poincaré sphere. Using a rigorous Q-tensor model to simulate the LC electro-optic switching, we demonstrate that the enhanced light-matter interaction in the MIM resonant cavity allows the polarization converter to operate at driving voltages below 10 Volt and with millisecond switching times.

Spectral and directional reshaping of fluorescence in large area self-assembled plasmonic-photonic crystals.

Spectral and directional reshaping of fluorescence from dye molecules embedded in self-assembled hybrid plasmonic-photonic crystals has been examined. The hybrid crystals comprise two-dimensional hexagonal arrays of dye-doped dielectric nanospheres, capped with silver semishells. Comparing the reshaped fluorescence spectra with measured transmission/reflection spectra and numerical calculations reveals that the spectral and directional reshaping of fluorescence is the result of its coupling to photonic crystal Bloch modes and to void plasmons localized inside the silver caps.

Nano- and microstructuring of graphene using UV-NIL.

In this work we demonstrate for the first time the micro- and nanostructuring of graphene by means of UV-nanoimprint lithography. Exfoliated graphene on SiO(2) substrates, as well as graphene deposited by chemical vapor deposition (CVD) on polycrystalline nickel and copper, and transferred CVD graphene on dielectric substrates, were used to demonstrate that our technique is suitable for large-area patterning (2 × 2 cm(2)) of graphene on various types of substrates. The demonstrated fabrication procedure of micrometer as well as nanometer-sized graphene structures with feature sizes down to 20 nm by a wafer-scale process opens up an avenue for the low-cost and high-throughput manufacturing of graphene-based optical and electronic applications. The processed graphene films show electron mobilities of up to 4.6 × 10(3) cm(2) V (-1) s(-1), which confirms them to exhibit state-of-the-art electronic quality with respect to the current literature.

Oblique incidence ellipsometric characterization and the substrate dependence of visible frequency fishnet metamaterials.

We use spectroscopic ellipsometry to investigate the angular-dependent optical modes of fishnet metamaterials fabricated by nanoimprint lithography. Spectroscopic ellipsometry is demonstrated as a fast and efficient method for metamaterial characterization and the measured polarization ratios significantly simplify the calibration procedures compared to reflectance and transmittance measurements. We show that the modes can be well identified by a combination of comparing different substrates and considering the angular dependence of the Wood's anomalies. The lack of angular dispersion of the anti-symmetric gap-modes does not agree with the model and requires further theoretical investigation.

Controlling electromagnetic fields with graded photonic crystals in metamaterial regime.

Engineering of a refractive index profile is a powerful method for controlling electromagnetic fields. In this paper, we investigate possible realization of isotropic gradient refractive index media at optical frequencies using two-dimensional graded photonic crystals. They consist of dielectric rods with spatially varying radii and can be homogenized in broad frequency range within the lowest band. Here they operate in metamaterial regime, that is, the graded photonic crystals are described with spatially varying effective refractive index so they can be regarded as low-loss and broadband graded dielectric metamaterials. Homogenization of graded photonic crystals is done with Maxwell-Garnett effective medium theory. Based on this theory, the analytical formulas are given for calculations of the rods radii which makes the implementation straightforward. The frequency range where homogenization is valid and where graded photonic crystal based devices work properly is discussed in detail. Numerical simulations of the graded photonic crystal based Luneburg lens and electromagnetic beam bend show that the homogenization based on Maxwell-Garnett theory gives very good results for implementation of devices intended to steer and focus electromagnetic fields.