Correlation between vertical dimension of occlusion and different facial measurements among a sample of sudanese adults / Correlación entre la dimensión vertical de la oclusión y diferentes medidas faciales en una muestra de adultos sudaneses

Aim: This study aimed to evaluate the correlation between vertical dimension of occlusion (VDO) and various facial measurements in a sample of Sudanese adults. Material and Methods: A total of 113 dental students (33 males and 80 females) with a mean age of 21.7±1.26 years were enrolled in this study. Different facial measurements including (Eye-Mouth, Eye-Eye, Eye-Ear, and Ear Height) were compared with two different measurements of VDO: N-Gn (from the tip of the nose to the tip of the chin), and Sn-Me (from the base of the nose to the bottom of the chin). Pearson's correlation coefficient test was utilized for the correlation between the measured parameters. A p-value of less than 0.05 was considered significant for all analyses. Results: A significant positive correlation was shown between all measured facial distances and both measured VDO distances. Though, the strongest correlation was seen for the eye-mouth distance (r= 0.725, p<0.001), while the weakest was for ear height (r= 0.254, p= 0.007). A paired t-test revealed a significant longer N-Gn distance than Sn-Me distance. Also, it has been shown that there were no significant differences between right and left sides of the face. Conclusion: The distance measured from the outer canthus of the eye to the angle of the mouth can be used to predict Subnasale-Menton (Sn-Me) distance.

Objetivo: Este estudio tuvo como objetivo evaluar la correlación entre dimensión vertical oclusal (DVO) y varias medidas faciales en una muestra de adultos sudaneses. Material y Métodos: Un total de 113 estudiantes de odontología (33 hombres y 80 mujeres) con una edad media de 21,7 ± 1,26 años se inscribieron en este estudio. Se compararon diferentes medidas faciales que incluyen (ojo- boca, ojo-ojo, ojo-oído y altura de la oreja) con dos medidas diferentes de DVO: N-Gn (desde la punta de la nariz hasta la punta del mentón) y Sn -Yo (desde la base de la nariz hasta la parte inferior del mentón). Se utilizó la prueba del coeficiente de correlación de Pearson para la correlación entre los parámetros medidos. Un valor de p inferior a 0,05 se consideró significativo para todos los análisis. Resultados: Se mostró una correlación positiva significativa entre todas las distancias faciales medidas y ambas distancias DVO medidas. Sin embargo, la correlación más fuerte se observó para la distancia ojo-boca (r=0,725, p<0,001), mientras que la más débil fue para la altura de las orejas (r=0,254, p=0,007). Una prueba de t pareada reveló una distancia N-Gn significativamente más larga que la distancia subnasal-mentón. Además, se ha demostrado que no hubo diferencias significativas entre los lados derecho e izquierdo de la cara. Conclusión: La distancia medida desde el canto externo del ojo hasta el ángulo de la boca puede utilizarse para predecir la distancia subnasal-mentón.

Comprehensive prosthodontic treatment of an elderly patient with compromised ridges: a clinical case report / Tratamiento prostodóntico integral de un paciente anciano con proceso alveolar comprometido: informe de un caso clínico

Introduction: The objective of a complete denture prosthesis is restoring aesthetics, comfort, and function by the replacement of missing dental and alveolar structures employing a stable prosthesis. Case Report: Many conditions can complicate the treatment plan and fabrication of a complete denture prosthesis. Complete denture fabrication in clinically compromised conditions is a challenging task for the dentist. In this clinical report, we present comprehensive management of a patient with denture-induced hyperplasia, flabby ridge, and severely resorbed edentulous ridge. The three part strategy for management of the above-mentioned challenges can provide high-quality complete dentures, based on recognized prosthodontic principles. This first part will discuss the management of denture induced hyperplasia by elimination of the inflammation and excision of the lesion. Part two will cover management of the flabby ridge using a modified window technique for the impression of maxillary flabby tissues for an improved and controlled application of the impression material that is usually obtainable in dental practice. Part three highlights the rehabilitation procedure of the resorbed mandibular ridge using a functional impression technique with minimum soft tissue displacement and neutral zone arrangement of teeth to improve stability of the denture. Conclusion: rehabilitation of a patient with denture induced hyperplasia, flabby ridge, and severely resorbed edentulous ridges was successful.

Introducción: El objetivo de una prótesis completa es restaurar la estética, la comodidad y la función mediante el reemplazo de las estructuras dentales y alveolares faltantes empleando una prótesis estable. Case Report: Muchas condiciones pueden complicar el plan de tratamiento y la fabricación de una prótesis completa. La fabricación completa de la dentadura en con-diciones comprometidas clínicamente es una tarea desafiante para el dentista. En este reporte de un caso clínico, presentamos el ma-nejo integral de un paciente con hiperplasia inducida por dentadura postiza, cresta flácida y cresta edéntula severamente reabsorbida. La estrategia de tres partes para el manejo de los desafíos mencionados anteriormente puede proporcionar prótesis completas de alta calidad, basadas en reconocidos principios protésicos. La primera parte discutirá el manejo de la hiperplasia inducida por dentadura postiza mediante la eliminación de la infla-mación y la extirpación de la lesión. La segunda parte cubrirá el manejo de la cresta alveolar flácida utilizando una técnica de ventana modificada para la impresión de tejidos flácidos maxilares para una aplicación mejorada y controlada del material de impresión que generalmente se obtiene en la práctica dental. La tercera parte destaca el procedimiento de rehabilitación del reborde mandibular reabsorbido utilizando una técnica de impresión funcional con un desplazamiento mínimo de los tejidos blandos y una disposición de la zona neutra de los dientes para mejorar la estabilidad de la dentadura. Conclusion: La rehabilitación de un paciente con hiperplasia inducida por dentaduras postizas, cresta flácida y reabsorbida fue exitosa.

Detachable Lip and Cheek Plumper for Rehabilitation of Facial Disfigurement.

BACKGROUND: Hemimaxillectomy of acquired palatal defects may predispose the patient to hypernasal speech, leakage of fluids into the nasal cavity, impaired masticatory function, and swallowing difficulties leading to a detrimental impact on the quality of life. Sequentially, it can also affect individual character and trust in social life, leading to social phobia and anxiety. This article presents prosthodontic management of a young male patient with deformation of the entire right half of the face due to surgical removal of odontogenic myxoma. It describes a method where the clinician utilized a simple, noninvasive, and cost-effective technique to cut the weight of the obturator and to attain aesthetics, utilizing a detachable lip and cheek plumper. Case Presentation. A 19-year-old male attended the Prosthodontic Clinics at Faculty of Dentistry, the University of Khartoum, eight months after the surgical removal of a tumor. The chief complaint was difficulty eating or drinking. Furthermore, he dropped out of school because of his facial deformity and his indistinct voice. Medical and dental history revealed surgical resection of the entire right half of the maxillary alveolar bone due to myxoma. Intraoral examination revealed a well-healed surgical defect in the maxillary right buccal vestibule creating an oroantral communication. A treatment plan was formulated, keeping the patient's demand in mind. The decision was made to treat the patient with a maxillary obturator that would gain its support from the remaining teeth and tissues with a detachable cheek and lip plumper. The use of dental magnets as a means of attachment was elected. CONCLUSION: This article has described a simple, noninvasive, and cost-effective method to improve facial appearance in patients with hollow faces. The plumper prosthesis successfully improved the patient's appearance to the extent that comfort and function would permit and encourage self-esteem.

Accuracy of different impression techniques for multiunit implant restoration: A qualitative in vitro study.

STATEMENT OF PROBLEM: Displacement of impression copings and/or implant replicas during impression making and dimensional changes that occur during clinical and laboratory phases of making multiunit implant prostheses may affect the accuracy and fit of the prostheses. PURPOSE: The purpose of this qualitative study was to investigate and compare 3 different impression techniques for osseointegrated dental implant transfer procedures. MATERIAL AND METHODS: Three impression transfer approaches were evaluated and compared: closed-tray impression technique (CTT), impression with plastic snap-fit impression copings; open-tray impression technique (OTT), impression with independent square copings; and OTT joining the impression copings with a photo-polymerized resin (PPT). A reference acrylic resin model with 4 implants was fabricated. Polyvinyl siloxane with a stock tray was used to make 45 impressions (n=15 for each impression technique), and 45 die definitive stone casts. A computer-aided design and computer-aided manufacturing (CAD-CAM) titanium framework was fabricated on the reference model. Three blinded operators evaluated the fit of the CAD-CAM titanium framework on each model to find clinically acceptable fit. The Kappa test was used for the agreement between the examiners (α=.05). RESULTS: Agreement was found among the 3 examiners on 44 of 45 specimens (Kappa value= 0.939; P<.001). In the CTT group, 14 casts were found to be acceptable. In the OTT group, nearly half of the specimens produced unacceptable fitting casts, whereas in the PPT group, 13 casts were found acceptable. CONCLUSIONS: CTT and PPT produced more accurate casts than the OTT technique, which yielded inferior results.