First evaluation of Eyberg Child Behavior Inventory for foster children in Japan.

BACKGROUND: Behavioral problems of foster children are an important issue for the maintenance of the foster care system, but they have not been adequately studied in Japan. We used the Eyberg Child Behavior Inventory (ECBI) to investigate behavioral problems among foster children and to examine associated factors. METHODS: Twenty-nine foster children and their foster parents and 479 non-foster children and parents were recruited for the foster and control groups, respectively. Both groups underwent statistical comparative analyses using data from their ECBI assessments. The ECBI has two scales: the Intensity Scale quantifies the severity of child behavioral problems, and the Problem Scale captures the caregiver's perceived difficulties handling each behavior. We conducted a retrospective investigation of the background of the foster parent-child pairs to explore potential causal relationships with behavioral problems. RESULTS: The mean intensity score for the foster group was significantly higher than that for the control group (p = 0.001). The mean problem scores for the foster group and the control group were not significantly different (p = 0.79). In the foster group, the retrospective investigation revealed two children with neurological or neurodevelopmental disorders, 17 with histories of abuse, and 10 with other issues. CONCLUSION: Intensity scores showed severe behavioral problems among foster children, perhaps caused by neurological disorders, abuse, parental mental health, or economic hardship. Problem scores showed no significant differences between groups. It can therefore be posited that foster parents might exhibit a more lenient parenting style when dealing with children who have a history of abuse by their biological parents.

Scalable and automated CRISPR-based strain engineering using droplet microfluidics.

We present a droplet-based microfluidic system that enables CRISPR-based gene editing and high-throughput screening on a chip. The microfluidic device contains a 10 × 10 element array, and each element contains sets of electrodes for two electric field-actuated operations: electrowetting for merging droplets to mix reagents and electroporation for transformation. This device can perform up to 100 genetic modification reactions in parallel, providing a scalable platform for generating the large number of engineered strains required for the combinatorial optimization of genetic pathways and predictable bioengineering. We demonstrate the system's capabilities through the CRISPR-based engineering of two test cases: (1) disruption of the function of the enzyme galactokinase (galK) in E. coli and (2) targeted engineering of the glutamine synthetase gene (glnA) and the blue-pigment synthetase gene (bpsA) to improve indigoidine production in E. coli.

Droplet microfluidics for synthetic biology.

Synthetic biology is an interdisciplinary field that aims to engineer biological systems for useful purposes. Organism engineering often requires the optimization of individual genes and/or entire biological pathways (consisting of multiple genes). Advances in DNA sequencing and synthesis have recently begun to enable the possibility of evaluating thousands of gene variants and hundreds of thousands of gene combinations. However, such large-scale optimization experiments remain cost-prohibitive to researchers following traditional molecular biology practices, which are frequently labor-intensive and suffer from poor reproducibility. Liquid handling robotics may reduce labor and improve reproducibility, but are themselves expensive and thus inaccessible to most researchers. Microfluidic platforms offer a lower entry price point alternative to robotics, and maintain high throughput and reproducibility while further reducing operating costs through diminished reagent volume requirements. Droplet microfluidics have shown exceptional promise for synthetic biology experiments, including DNA assembly, transformation/transfection, culturing, cell sorting, phenotypic assays, artificial cells and genetic circuits.

3D Printed "Earable" Smart Devices for Real-Time Detection of Core Body Temperature.

Real-time detection of basic physiological parameters such as blood pressure and heart rate is an important target in wearable smart devices for healthcare. Among these, the core body temperature is one of the most important basic medical indicators of fever, insomnia, fatigue, metabolic functionality, and depression. However, traditional wearable temperature sensors are based upon the measurement of skin temperature, which can vary dramatically from the true core body temperature. Here, we demonstrate a three-dimensional (3D) printed wearable "earable" smart device that is designed to be worn on the ear to track core body temperature from the tympanic membrane (i.e., ear drum) based on an infrared sensor. The device is fully integrated with data processing circuits and a wireless module for standalone functionality. Using this smart earable device, we demonstrate that the core body temperature can be accurately monitored regardless of the environment and activity of the user. In addition, a microphone and actuator are also integrated so that the device can also function as a bone conduction hearing aid. Using 3D printing as the fabrication method enables the device to be customized for the wearer for more personalized healthcare. This smart device provides an important advance in realizing personalized health care by enabling real-time monitoring of one of the most important medical parameters, core body temperature, employed in preliminary medical screening tests.

Finger-powered microfluidic systems using multilayer soft lithography and injection molding processes.

Point-of-care (POC) and disposable biomedical applications demand low-power microfluidic systems with pumping components that provide controlled pressure sources. Unfortunately, external pumps have hindered the implementation of such microfluidic systems due to limitations associated with portability and power requirements. Here, we propose and demonstrate a 'finger-powered' integrated pumping system as a modular element to provide pressure head for a variety of advanced microfluidic applications, including finger-powered on-chip microdroplet generation. By utilizing a human finger for the actuation force, electrical power sources that are typically needed to generate pressure head were obviated. Passive fluidic diodes were designed and implemented to enable distinct fluids from multiple inlet ports to be pumped using a single actuation source. Both multilayer soft lithography and injection molding processes were investigated for device fabrication and performance. Experimental results revealed that the pressure head generated from a human finger could be tuned based on the geometric characteristics of the pumping system, with a maximum observed pressure of 7.6 ± 0.1 kPa. In addition to the delivery of multiple, distinct fluids into microfluidic channels, we also employed the finger-powered pumping system to achieve the rapid formation of both water-in-oil droplets (106.9 ± 4.3 µm in diameter) and oil-in-water droplets (75.3 ± 12.6 µm in diameter) as well as the encapsulation of endothelial cells in droplets without using any external or electrical controllers.

Microfluidic bead-based diodes with targeted circular microchannels for low Reynolds number applications.

Self-regulating fluidic components are critical to the advancement of microfluidic processors for chemical and biological applications, such as sample preparation on chip, point-of-care molecular diagnostics, and implantable drug delivery devices. Although researchers have developed a wide range of components to enable flow rectification in fluidic systems, engineering microfluidic diodes that function at the low Reynolds number (Re) flows and smaller scales of emerging micro/nanofluidic platforms has remained a considerable challenge. Recently, researchers have demonstrated microfluidic diodes that utilize high numbers of suspended microbeads as dynamic resistive elements; however, using spherical particles to block fluid flow through rectangular microchannels is inherently limited. To overcome this issue, here we present a single-layer microfluidic bead-based diode (18 µm in height) that uses a targeted circular-shaped microchannel for the docking of a single microbead (15 µm in diameter) to rectify fluid flow under low Re conditions. Three-dimensional simulations and experimental results revealed that adjusting the docking channel geometry and size to better match the suspended microbead greatly increased the diodicity (Di) performance. Arraying multiple bead-based diodes in parallel was found to adversely affect system efficacy, while arraying multiple diodes in series was observed to enhance device performance. In particular, systems consisting of four microfluidic bead-based diodes with targeted circular-shaped docking channels in series revealed average Di's ranging from 2.72 ± 0.41 to 10.21 ± 1.53 corresponding to Re varying from 0.1 to 0.6.

Dual-mode hydrodynamic railing and arraying of microparticles for multi-stage signal detection in continuous flow biochemical microprocessors.

Continuous flow particulate-based microfluidic processors are in critical demand for emerging applications in chemistry and biology, such as point-of-care molecular diagnostics. Challenges remain, however, for accomplishing biochemical assays in which microparticle immobilization is desired or required during intermediate stages of fluidic reaction processes. Here we present a dual-mode microfluidic reactor that functions autonomously under continuous flow conditions to: (i) execute multi-stage particulate-based fluidic mixing routines, and (ii) array select numbers of microparticles during each reaction stage (e.g., for optical detection). We employ this methodology to detect the inflammatory cytokine, interferon-gamma (IFN-γ), via a six-stage aptamer-based sandwich assay.

A resettable dynamic microarray device.

This paper describes a simple reusable device that hydrodynamically traps a large number of beads in an array. Guiding pillars allow us to release the trapped beads by simply reversing the flow direction. The trap and reset operations are extremely simple, robust and highly efficient. We analyzed the path of the beads in a microchannel with pillars to optimize the design of the device. We succeeded in arraying hundreds of 100 µm microbeads, subsequently released them in a few minutes, and demonstrated multiple experiments with a single device.

A dynamic microarray device for paired bead-based analysis.

In this study, we have developed a meander-shaped dynamic microfluidic technology that allows us to pair two different types of microbeads in a trapping site. The dynamic microfluidic technology comprises implemented modifications of a conventional dynamic microarray design such as: (i) the combination of a meander-shaped by-pass channel and a trapping channel with a hydrodynamic trapping site and (ii) line-symmetrical formation of the by-pass and trapping channels. Using these modifications, we have successfully trapped different types of sample in one trapping site, and constructed an array of paired beads of different type such as polystyrene beads or hydrogel beads made of agarose, collagen or alginate. We found that this meander-shaped dynamic microfluidic technology is applicable for the observation of interactions between the paired beads such as molecular diffusion.