Common as well as unique methylation-sensitive DNA regulatory elements in three mammalian SLC9C1 genes.

The SLC9C1 gene (which encodes the NHE10 protein) is essential for male fertility in both mice and humans, however the epigenetic mechanisms regulating its testis/sperm-specific gene expression have yet to be studied. Here we identify and characterize DNA regulatory elements of the SLC9C1 gene across three mammalian species: mouse, rat, and human. First, in silico analysis of these mammalian SLC9C1 genes identified a CpG island located upstream of the transcription start site in the same relative position in all three genes. Further analysis reveals that this CpG island behaves differently, with respect to gene regulatory activity, in the mouse SLC9C1 gene than it does in the rat and human SLC9C1 gene. The mouse SLC9C1 CpG island displays strong promoter activity by itself and seems to have a stronger gene regulatory effect than either the rat or human SLC9C1 CpG islands. While the function of the upstream SLC9C1 CpG island may be divergent across the three studied species, it appears that the promoters of these three mammalian SLC9C1 genes share similar DNA methylation-sensitive regulatory mechanisms. All three SLC9C1 promoter regions are differentially methylated in lung and testis, being more hypermethylated in lung relative to the testis, and DNA sequence alignments provide strong evidence of primary sequence conservation. Luciferase assays reveal that in vitro methylation of constructs containing different elements of the three SLC9C1 genes largely exhibit methylation-sensitive promoter activity (reduced promoter activity when methylated) in both HEK 293 and GC-1spg cells. In total, our data suggest that the DNA methylation-sensitive elements of the mouse, rat, and human SLC9C1 promoters are largely conserved, while the upstream SLC9C1 CpG island common to all three species seems to perform a different function in mouse than it does in rat and human. This work provides evidence that while homologous genes can all be regulated by DNA methylation-dependent epigenetic mechanisms, the location of the specific cis-regulatory elements responsible for this regulation can differ across species.

Na+/H+ Exchangers (NHEs) in Mammalian Sperm: Essential Contributors to Male Fertility.

Na+/H+ exchangers (NHEs) are known to be important regulators of pH in multiple intracellular compartments of eukaryotic cells. Sperm function is especially dependent on changes in pH and thus it has been postulated that NHEs play important roles in regulating the intracellular pH of these cells. For example, in order to achieve fertilization, mature sperm must maintain a basal pH in the male reproductive tract and then alkalize in response to specific signals in the female reproductive tract during the capacitation process. Eight NHE isoforms are expressed in mammalian testis/sperm: NHE1, NHE3, NHE5, NHE8, NHA1, NHA2, NHE10, and NHE11. These NHE isoforms are expressed at varying times during spermatogenesis and localize to different subcellular structures in developing and mature sperm where they contribute to multiple aspects of sperm physiology and male fertility including proper sperm development/morphogenesis, motility, capacitation, and the acrosome reaction. Previous work has provided evidence for NHE3, NHE8, NHA1, NHA2, and NHE10 being critical for male fertility in mice and NHE10 has recently been shown to be essential for male fertility in humans. In this article we review what is known about each NHE isoform expressed in mammalian sperm and discuss the physiological significance of each NHE isoform with respect to male fertility.

Common as well as unique methylation-sensitive DNA regulatory elements in three mammalian SLC9C1 genes.

The SLC9C1 gene (which encodes the NHE10 protein) is essential for male fertility in both mice and humans, however the epigenetic mechanisms regulating its testis/sperm-specific gene expression have yet to be studied. Here we identify and characterize DNA regulatory elements of the SLC9C1 gene across three mammalian species: mouse, rat, and human. First, in silico analysis of these mammalian SLC9C1 genes identified a CpG island located upstream of the transcription start site in the same relative position in all three genes. Further analysis reveals that this CpG island behaves differently, with respect to gene regulatory activity, in the mouse SLC9C1 gene than it does in the rat and human SLC9C1 gene. The mouse SLC9C1 CpG island displays strong promoter activity by itself and seems to have a stronger gene regulatory effect than either the rat or human SLC9C1 CpG islands. While the function of the upstream SLC9C1 CpG island may be divergent across the three studied species, it appears that the promoters of these three mammalian SLC9C1 genes share similar DNA methylation-sensitive regulatory mechanisms. All three SLC9C1 promoter regions are differentially methylated in lung and testis, being more hypermethylated in lung relative to the testis, and DNA sequence alignments provide strong evidence of primary sequence conservation. Luciferase assays reveal that in vitro methylation of constructs containing different elements of the three SLC9C1 genes largely exhibit methylation-sensitive promoter activity (reduced promoter activity when methylated) in both HEK 293 and GC-1spg cells. In total, our data suggest that the DNA methylation-sensitive elements of the mouse, rat, and human SLC9C1 promoters are largely conserved, while the upstream SLC9C1 CpG island common to all three species seems to perform a different function in mouse than it does in rat and human. This work provides evidence that while homologous genes can all be regulated by DNA methylation-dependent epigenetic mechanisms, the location of the specific cis-regulatory elements responsible for this regulation can differ across species.

The SLC9C2 Gene Product (Na+/H+ Exchanger Isoform 11; NHE11) Is a Testis-Specific Protein Localized to the Head of Mature Mammalian Sperm.

Na+/H+ exchangers (NHEs) are a family of ion transporters that regulate the pH of various cell compartments across an array of cell types. In eukaryotes, NHEs are encoded by the SLC9 gene family comprising 13 genes. SLC9C2, which encodes the NHE11 protein, is the only one of the SLC9 genes that is essentially uncharacterized. Here, we show that SLC9C2 exhibits testis/sperm-restricted expression in rats and humans, akin to its paralog SLC9C1 (NHE10). Similar to NHE10, NHE11 is predicted to contain an NHE domain, a voltage sensing domain, and finally an intracellular cyclic nucleotide binding domain. An immunofluorescence analysis of testis sections reveals that NHE11 localizes with developing acrosomal granules in spermiogenic cells in both rat and human testes. Most interestingly, NHE11 localizes to the sperm head, likely the plasma membrane overlaying the acrosome, in mature sperm from rats and humans. Therefore, NHE11 is the only known NHE to localize to the acrosomal region of the head in mature sperm cells. The physiological role of NHE11 has yet to be demonstrated but its predicted functional domains and unique localization suggests that it could modulate intracellular pH of the sperm head in response to changes in membrane potential and cyclic nucleotide concentrations that are a result of sperm capacitation events. If NHE11 is shown to be important for male fertility, it will be an attractive target for male contraceptive drugs due to its exclusive testis/sperm-specific expression.

Cultivation of hierarchical 3D scaffolds inside a perfusion bioreactor: scaffold design and finite-element analysis of fluid flow.

The use of porous 3D scaffolds for the repair of bone nonunion and osteoporotic bone is currently an area of great interest. Using a combination of thermally-induced phase separation (TIPS) and 3D-plotting (3DP), we have generated hierarchical 3DP/TIPS scaffolds made of poly(lactic-co-glycolic acid) (PLGA) and nanohydroxyapatite (nHA). A full factorial design of experiments was conducted, in which the PLGA and nHA compositions were varied between 6-12% w/v and 10-40% w/w, respectively, totaling 16 scaffold formulations with an overall porosity ranging between 87%-93%. These formulations included an optimal scaffold design identified in our previous study. The internal structures of the scaffolds were examined using scanning electron microscopy and microcomputed tomography. Our optimal scaffold was seeded with MC3T3-E1 murine preosteoblastic cells and subjected to cell culture inside a tissue culture dish and a perfusion bioreactor. The results were compared to those of a commercial CellCeram™ scaffold with a composition of 40% ß-tricalcium phosphate and 60% hydroxyapatite (ß-TCP/HA). Media flow within the macrochannels of 3DP/TIPS scaffolds was modeled in COMSOL software in order to fine tune the wall shear stress. CyQUANT DNA assay was performed to assess cell proliferation. The normalized number of cells for the optimal scaffold was more than twofold that of CellCeram™ scaffold after two weeks of culture inside the bioreactor. Despite the substantial variability in the results, the observed improvement in cell proliferation upon culture inside the perfusion bioreactor (vs. static culture) demonstrated the role of macrochannels in making the 3DP/TIPS scaffolds a promising candidate for scaffold-based tissue engineering.

In vitro characterization of hierarchical 3D scaffolds produced by combining additive manufacturing and thermally induced phase separation.

This paper reports on the hybrid process we have used for producing hierarchical scaffolds made of poly(lactic-co-glycolic) acid (PLGA) and nanohydroxyapatite (nHA), analyzes their internal structures via scanning electron microscopy, and presents the results of our in vitro proliferation of MC3T3-E1 cells and alkaline phosphatase activity (ALP) for 0 and 21 days. These scaffolds were produced by combining additive manufacturing (AM) and thermally induced phase separation (TIPS) techniques. Slow cooling at a rate of 1.5 °C/min during the TIPS process was used to enable a uniform temperature throughout the scaffolds, and therefore, a relatively uniform pore size range. We produced ten different scaffold compositions and topologies in this study. These scaffolds had macrochannels with diameters of ∼300 µm, ∼380 µm, and ∼460 µm, generated by the extraction of embedded porous 3D-plotted polyethylene glycol (PEG) matrices. The other experimental factors included different TIPS temperatures (-20 °C, -10 °C, and 0 °C), as well as varying PLGA concentrations (8%, 10%, and 12% w/v) and nHA content (0%, 10%, and 20% w/w). Our results indicated that almost all these macro/microporous scaffolds supported cell growth over the period of 21 days. Nevertheless, significant differences were observed among some scaffolds in terms of their support of cell proliferation and differentiation. This paper presents the results of our in vitro cell culture for 0 and 21 days. Our optimal scaffold with a porosity of ∼90%, a modulus of ∼5.2 MPa, and a nHA content of 20% showed a cell adhesion of ∼29% on day 0 and maintained cell proliferation and ALP activity over the 21-day in vitro culture. Hence, the use of additive manufacturing and designed experiments to optimize the scaffold fabrication parameters resulted in superior mechanical properties that most other studies using TIPS.

I-Optimal Design of Hierarchical 3D Scaffolds Produced by Combining Additive Manufacturing and Thermally Induced Phase Separation.

The limitations in the transport of oxygen, nutrients, and metabolic waste products pose a challenge to the development of bioengineered bone of clinically relevant size. This paper reports the design and characterization of hierarchical macro/microporous scaffolds made of poly(lactic-co-glycolic) acid and nanohydroxyapatite (PLGA/nHA). These scaffolds were produced by combining additive manufacturing (AM) and thermally induced phase separation (TIPS) techniques. Macrochannels with diameters of ~300 µm, ~380 µm, and ~460 µm were generated by embedding porous 3D-plotted polyethylene glycol (PEG) inside PLGA/nHA/1,4-dioxane or PLGA/1,4-dioxane solutions, followed by PEG extraction using deionized (DI) water. We have used an I-optimal design of experiments (DoE) and the response surface analysis (JMP® software) to relate three responses (scaffold thickness, porosity, and modulus) to the four experimental factors affecting the scaffold macro/microstructures (e.g., PEG strand diameter, PLGA concentration, nHA content, and TIPS temperature). Our results indicated that a PEG strand diameter of ~380 µm, a PLGA concentration of ~10% w/v, a nHA content of ~10% w/w, and a TIPS temperature around -10°C could generate scaffolds with a porosity of ~90% and a modulus exceeding 4 MPa. This paper presents the steps for the I-optimal design of these scaffolds and reports on their macro/microstructures, characterized using scanning electron microscopy (SEM) and micro-computed tomography (micro-CT).

I-Optimal design of poly(lactic-co-glycolic) acid/hydroxyapatite three-dimensional scaffolds produced by thermally induced phase separation.

In bone tissue engineering, 3D scaffolds are often designed to have adequate modulus while taking into consideration the requirement for a highly porous network for cell seeding and tissue growth. This paper presents the design optimization of 3D scaffolds made of poly(lactic-co-glycolic) acid (PLGA) and nanohydroxyapatite (nHA), produced by thermally induced phase separation (TIPS). Slow cooling at a rate of 1°C/min enabled a uniform temperature and produced porous scaffolds with a relatively uniform pore size. An I-optimal design of experiments (DoE) with 18 experimental runs was used to relate four responses (scaffold thickness, density, porosity, and modulus) to three experimental factors, namely the TIPS temperature (-20°C, -10°C, and 0°C), PLGA concentration (7%, 10%, and 13% w/v), and nHA content (0%, 15%, and 30% w/w). The response surface analysis using JMP® software predicted a temperature of -18.3°C, a PLGA concentration of 10.3% w/v, and a nHA content of 30% w/w to achieve a thickness of 3 mm, a porosity of 83%, and a modulus of ~4 MPa. The set of validation scaffolds prepared using the predicted factor levels had a thickness of 3.05 ± 0.37 mm, a porosity of 86.8 ± 0.9 %, and a modulus of 3.57 ± 2.28 MPa.

Prospect of Stem Cells in Bone Tissue Engineering: A Review.

Mesenchymal stem cells (MSCs) have been the subject of many studies in recent years, ranging from basic science that looks into MSCs properties to studies that aim for developing bioengineered tissues and organs. Adult bone marrow-derived mesenchymal stem cells (BM-MSCs) have been the focus of most studies due to the inherent potential of these cells to differentiate into various cell types. Although, the discovery of induced pluripotent stem cells (iPSCs) represents a paradigm shift in our understanding of cellular differentiation. These cells are another attractive stem cell source because of their ability to be reprogramed, allowing the generation of multiple cell types from a single cell. This paper briefly covers various types of stem cell sources that have been used for tissue engineering applications, with a focus on bone regeneration. Then, an overview of some recent studies making use of MSC-seeded 3D scaffold systems for bone tissue engineering has been presented. The emphasis has been placed on the reported scaffold properties that tend to improve MSCs adhesion, proliferation, and osteogenic differentiation outcomes.

Methylation-dependent and independent regulatory regions in the Na,K-ATPase alpha4 (Atp1a4) gene may impact its testis-specific expression.

The α4 Na,K-ATPase is a sperm-specific protein essential for sperm motility and fertility yet little is known about the mechanisms that regulate its expression in germ cells. Here, the potential involvement of DNA methylation in regulating the expression of this sperm-specific protein is explored. A single, intragenic CpG island (Mα4-CGI) was identified in the gene encoding the mouse α4 Na,K-ATPase (Atp1a4), which displayed reduced methylation in mouse sperm (cells that contain α4) compared to mouse kidney (tissue that lacks α4 expression). Unlike the intragenic CGI, the putative promoter (the -700 to +200 region relative to the transcriptional start site) of Atp1a4 did not show differential methylation between kidney and sperm nevertheless it did drive methylation-dependent reporter gene expression in the male germ cell line GC-1spg. Furthermore, treatment of GC-1spg cells with 5-aza2-deoxycytidine led to upregulation of the α4 transcript and decreased methylation of both the Atp1a4 promoter and the Mα4-CGI. In addition, Atp1a4 expression in mouse embryonic stem cells deficient in DNA methyltransferases suggests that both maintenance and de novo methylation are involved in regulating its expression. In an attempt to define the regulatory function of the Mα4-CGI, possible roles of the Mα4-CGI in regulating Atp1a4 expression via methylation-dependent transcriptional elongation inhibition in somatic cells and via its ability to repress promoter activity in germ cells were uncovered. In all, our data suggests that both the promoter and the intragenic CGI could combine to provide multiple modes of regulation for optimizing the Atp1a4 expression level in a cell type-specific manner.

Hierarchical polymeric scaffolds support the growth of MC3T3-E1 cells.

Tissue engineering makes use of the principles of biology and engineering to sustain 3D cell growth and promote tissue repair and/or regeneration. In this study, macro/microporous scaffold architectures have been developed using a hybrid solid freeform fabrication/thermally induced phase separation (TIPS) technique. Poly(lactic-co-glycolic acid) (PLGA) dissolved in 1,4-dioxane was used to generate a microporous matrix by the TIPS method. The 3D-bioplotting technique was used to fabricate 3D macroporous constructs made of polyethylene glycol (PEG). Embedding the PEG constructs inside the PLGA solution prior to the TIPS process and subsequent extraction of PEG following solvent removal (1,4-dioaxane) resulted in a macro/microporous structure. These hierarchical scaffolds with a bimodal pore size distribution (<50 and >300 µm) contained orthogonally interconnected macro-channels generated by the extracted PEG. The diameter of the macro-channels was varied by tuning the dispensing parameters of the 3D bioplotter. The in vitro cell culture using murine MC3T3-E1 cell line for 21 days demonstrated that these scaffolds could provide a favorable environment to support cell adhesion and growth.

Identification and characterization of methylation-dependent/independent DNA regulatory elements in the human SLC9B1 gene.

The human NHEDC1 (hNHEDC1) protein is thought to be essential for sperm motility and fertility however the mechanisms regulating its gene expression are largely unknown. In this study we have identified multiple DNA regulatory elements in the 5' end of the gene encoding hNHEDC1 (SLC9B1) and have explored the role that DNA methylation at these elements plays in the regulation of its expression. We first show that the full-length hNHEDC1 protein is testis-specific for the tissues that we tested and that it localizes to the cells of the seminiferous tubules. In silico analysis of the SLC9B1 gene locus identified two putative promoters (P1 and P2) and two CpG islands - CpGI (overlapping with P1) and CpGII (intragenic) - at the 5' end of the gene. By deletion analysis of P1, we show that the region from -23 bp to +200 bp relative to the transcription start site (TSS) is sufficient for optimal promoter activity in a germ cell line. Additionally, in vitro methylation of the P1 (the -500 bp to +200 bp region relative to the TSS) abolishes its activity in germ cells and somatic cells strongly suggesting that DNA methylation at this promoter could regulate SLC9B1 expression. Furthermore, bisulfite-sequencing analysis of the P1/CpGI uncovered reduced methylation in the testis vs. lung whereas CpGII displayed no differences in methylation between these two tissues. Additionally, treatment of HEK 293 cells with 5-aza-2-Deoxycytidine led to upregulation of NHEDC1 transcript and reduced methylation in the promoter CpGI. Finally, we have uncovered both enhancer and silencer functions of the intragenic SLC9B1 CpGII. In all, our data suggests that SLC9B1 gene expression could be regulated via a concerted action of DNA methylation-dependent and independent mechanisms mediated by these multiple DNA regulatory elements.

Solvent-free polymer/bioceramic scaffolds for bone tissue engineering: fabrication, analysis, and cell growth.

This study examines the potential use of porous polycaprolactone (PCL) and polycaprolocatone/hydroxyapatite (PCL/HA) scaffolds fabricated through melt molding and porogen leaching for bone tissue engineering. While eliminating organic solvents is desirable, the process steps proposed in this study for uniformly dispersing HA particles (~5 µm in size) within the scaffold can also contribute to homogeneous properties for these porous composites. Poly(ethylene oxide) (PEO) was chosen as a porogen due to its similar density and melting point as PCL. Pore size of the scaffold was controlled by limiting the size of PCL and PEO particles used in fabrication. The percent of HA in the fabricated scaffolds was quantified by thermogravimetric analysis (TGA). Mechanical testing was used to compare the modulus of the scaffolds to that of bone, and the pore size distribution was examined with microcomputed tomography (µCT). Scanning electron microscopy (SEM) was used to examine the effect on scaffold morphology caused by the addition of HA particles. Both µCT and SEM results showed that HA could be incorporated into PCL scaffolds without negatively affecting scaffold morphology or pore formation. Energy-dispersive X-ray spectroscopy (EDS) and elemental mapping demonstrated a uniform distribution of HA within PCL/HA scaffolds. Murine calvaria-derived MC3T3-E1 cells were used to determine whether cells could attach on scaffolds and grow for up to 21 days. SEM images revealed an increase in cell attachment with the incorporation of HA into the scaffolds. Similarly, DNA content analysis showed a higher cell adhesion to PCL/HA scaffolds.

The human Na,K-ATPase alpha 4 isoform is a ouabain-sensitive alpha isoform that is expressed in sperm.

The Na,K-ATPase generates electrochemical gradients across the plasma membrane that are responsible for numerous cellular and physiological processes. The active Na,K-ATPase is minimally composed of an alpha and a beta subunit and families of isoforms for both subunits exist. Recent studies have identified a physiological role for the rat Na,K-ATPase alpha4 isoform in sperm motility. However, very little is known about the human Na,K-ATPase alpha4 isoform other than its genomic sequence and structure and its mRNA expression pattern. Here, the human alpha4 isoform of the Na,K-ATPase is cloned, expressed, and characterized. Full length cDNAs encoding the putative human alpha4 isoform of the Na,K-ATPase were identified from a number of ESTs and a protein product corresponding to this isoform was shown to be expressed from these cDNAs. The human Na,K-ATPase alpha4 isoform protein was found to be expressed in mature sperm in human testes sections and it is localized specifically to the principle piece of human sperm. In addition, the presence of the Na,K-ATPase alpha4 isoform is absent in immature testes however its expression appears coincident with sexual maturity. And finally, the human Na,K-ATPase alpha4 isoform was shown to be as sensitive to cardiac glycoside inhibition as the human Na,K-ATPase alpha1 isoform. Considering the important role of the rat Na,K-ATPase alpha4 isoform in rat sperm motility, the demonstration that the human alpha4 isoform is a sperm-specific protein localized to the flagellum suggests a role for the human Na,K-ATPase alpha4 isoform in human sperm physiology.

Heparin-binding EGF-like growth factor (HB-EGF) overexpression in transgenic mice downregulates insulin-like growth factor binding protein (IGFBP)-3 and -4 mRNA.

An in vivo approach was taken to assess the biological significance of heparin-binding EGF-like growth factor (HB-EGF) using transgenic mice. Transgenic mice were generated using the pIRES-EGFP vector expressing a bicistronic mRNA containing both human HB-EGF (hHB-EGF) and enhanced green fluorescent protein (EGFP) coding sequences under the regulation of the cytomegalovirus immediate-early (CMV-IE) promoter. As a marker for transgene expression, EGFP fluorescence in 5 microm tissue sections was evaluated. To confirm HB-EGF expression in EGFP-containing tissues, HB-EGF mRNA was analyzed by RT-PCR and Northern blot analysis. Protein levels of HB-EGF and insulin-like growth factor binding protein-3 (IGFBP-3), a molecule that stabilizes IGFs, which in turn helps to promote growth, were analyzed by Western blot. Also, the weights of transgenic mice were compared with the weights of wild type non-transgenic littermates over a 10-week period. EGFP fluorescence, RT-PCR and Northern analysis of a variety of tissues from hHB-EGF transgenic mice indicate recombinant EGFP/hHB-EGF mRNA expression in kidney, liver, lung and stomach. Western blot analysis confirmed that HB-EGF protein levels were greater in these tissues from hHB-EGF transgenic mice compared to wild type non-transgenic littermates. IGFBP-3 protein was absent in serum of transgenic mice prior to the onset of puberty, but indistinguishable from wild type non-transgenic mice after puberty. Furthermore, IGFBP-3 and IGFBP-4 mRNA were downregulated in the kidney, but not liver or lung of the transgenic mice. In accordance with reduced IGFBP-3 and -4 levels, hHB-EGF transgenic mice exhibited a 20% decrease in weight prior to 6 weeks of age compared to wild type non-transgenic littermates. Our laboratory has generated a biologically functional transgenic mouse model exhibiting increased expression of hHB-EGF in kidney, liver, lung and stomach. Overexpression of hHB-EGF affected the growth rate of these transgenic mice possibly through a pathway involving IGFBP-3 and IGFBP-4.

Decreased expression of both the alpha1- and alpha2-subunits of the Na-K-ATPase reduces maximal alveolar epithelial fluid clearance.

Impaired epithelial sodium channel function predisposes to delayed resorption of pulmonary edema and more severe experimental lung injury, whereas even a small fraction of the normal Na-K-ATPase activity is thought to be sufficient to maintain normal ion transport. However, direct proof is lacking. Therefore, we studied baseline and cAMP stimulated alveolar fluid clearance (AFC) in mice with a 50% decrease in lung protein expression of the alpha(1)- and/or alpha(2)-subunit of the Na-K-ATPase. There was no difference in basal and stimulated AFC in alpha(1)(+/-) or alpha(2)(+/-) mice compared with wild-type littermates. Also, the compound heterozygous mice (alpha(1)(+/-)/alpha(2)(+/-)) had normal basal AFC. However, the combined alpha(1)(+/-)/alpha(2)(+/-) mice showed a significant decrease in cAMP-stimulated AFC compared with wild-type littermates (11.1 +/- 1.0 vs. 14.9 +/- 1.8%/30 min, P < 0.001). When exposed to 96 h of >95% hyperoxia, the decrease in stimulated AFC in the alpha(1)(+/-)/alpha(2)(+/-) mice was not associated with more lung edema compared with wild-type littermates (lung wet-to-dry weight ratio 6.6 +/- 0.9 vs. 5.9 +/- 1.1, respectively; P = not significant). Thus a 50% decrease in protein expression of the alpha(1)- or alpha(2)-subunits of the Na-K-ATPase does not impair basal or stimulated AFC. However, a 50% protein reduction in both the alpha(1)- and alpha(2)-subunits of the Na-K-ATPase produces a submaximal stimulated AFC, suggesting a synergistic role for alpha(1)- and alpha(2)-subunits in cAMP-dependent alveolar epithelial fluid clearance.

Genetic profiling reveals global changes in multiple biological pathways in the hearts of Na, K-ATPase alpha 1 isoform haploinsufficient mice.

The Na,K-ATPase transports three sodium ions out of the cell and two potassium ions into the cell using ATP hydrolysis for energy. The ion gradient formed by the Na,K-ATPase contributes to the resting membrane potential, maintains cellular excitability and is important for glucose and amino acid uptake in the cell. The alpha1 catalytic isoform is expressed in virtually all cell types. We have previously examined cardiac physiology of mice lacking one copy of the alpha1 isoform gene of the Na,K-ATPase. The observation of reduced cardiac contractility in the alpha1 heterozygous mice was unexpected since mice heterozygous for the alpha2 isoform displayed enhanced cardiac contractility similar to what would be observed with cardiac glycoside treatment. We further examined hearts from alpha1 heterozygous mice to identify genomic responses to reduced Na,K-ATPase capacity. Using microarray analyses, we identified groups of genes whose expressions were perturbed in the alpha1 heterozygous hearts compared to wild-type. Known functional relationships of these genes suggest that multiple biological pathways are altered by alpha1 hemizygosity including activation of the renin-angiotensin system, changes in genes of energy metabolism and transport and elevated brain natriuretic peptide. This suggests that Na,K-ATPase alpha1 isoform activity may be required in numerous cellular processes.

The Na,K-ATPase alpha 2 isoform is expressed in neurons, and its absence disrupts neuronal activity in newborn mice.

Na,K-ATPase is an ion transporter that impacts neural and glial physiology by direct electrogenic activity and the modulation of ion gradients. Its three isoforms in brain have cell-type and development-specific expression patterns. Interestingly, our studies demonstrate that in late gestation, the alpha2 isoform is widely expressed in neurons, unlike in the adult brain, in which alpha2 has been shown to be expressed primarily in astrocytes. This unexpected distribution of alpha2 isoform expression in neurons is interesting in light of our examination of mice lacking the alpha2 isoform which fail to survive after birth. These animals showed no movement; however, defects in gross brain development, muscle contractility, neuromuscular transmission, and lung development were ruled out. Akinesia suggests a primary neuronal defect and electrophysiological recordings in the pre-Bötzinger complex, the brainstem breathing center, showed reduction of respiratory rhythm activity, with less regular and smaller population bursts. These data demonstrate that the Na,K-ATPase alpha2 isoform could be important in the modulation of neuronal activity in the neonate.

Na+ pump alpha 2-subunit expression modulates Ca2+ signaling.

The role of the Na(+) pump alpha(2)-subunit in Ca(2+) signaling was examined in primary cultured astrocytes from wild-type (alpha(2)+/+ = WT) mouse fetuses and those with a null mutation in one [alpha(2)+/- = heterozygote (Het)] or both [alpha(2)-/- = knockout (KO)] alpha(2) genes. Na(+) pump catalytic (alpha) subunit expression was measured by immunoblot; cytosol [Na(+)] ([Na(+)](cyt)) and [Ca(2+)] ([Ca(2+)](cyt)) were measured with sodium-binding benzofuran isophthalate and fura 2 by using digital imaging. Astrocytes express Na(+) pumps with both alpha(1)- ( approximately 80% of total alpha) and alpha(2)- ( approximately 20% of total alpha) subunits. Het astrocytes express approximately 50% of normal alpha(2); those from KO express none. Expression of alpha(1) is normal in both Het and KO cells. Resting [Na(+)](cyt) = 6.5 mM in WT, 6.8 mM in Het (P > 0.05 vs. WT), and 8.0 mM in KO cells (P < 0.001); 500 nM ouabain (inhibits only alpha(2)) equalized [Na(+)](cyt) at 8 mM in all three cell types. Resting [Ca(2+)](cyt) = 132 nM in WT, 162 nM in Het, and 196 nM in KO cells (both P < 0.001 vs. WT). Cyclopiazonic acid (CPA), which inhibits endoplasmic reticulum (ER) Ca(2+) pumps and unloads the ER, induces transient (in Ca(2+)-free media) or sustained (in Ca(2+)-replete media) elevation of [Ca(2+)](cyt). These Ca(2+) responses to 10 microM CPA were augmented in Het as well as KO cells. When CPA was applied in Ca(2+)-free media, the reintroduction of Ca(2+) induced significantly larger transient rises in [Ca(2+)](cyt) (due to Ca(2+) entry through store-operated channels) in Het and KO cells than in WT cells. These results correlate with published evidence that alpha(2) Na(+) pumps and Na(+)/Ca(2+) exchangers are confined to plasma membrane microdomains that overlie the ER. The data suggest that selective reduction of alpha(2) Na(+) pump activity can elevate local [Na(+)] and, via Na(+)/Ca(2+) exchange, [Ca(2+)] in the tiny volume of cytosol between the plasma membrane and ER. This, in turn, augments adjacent ER Ca(2+) stores and thereby amplifies Ca(2+) signaling without elevating bulk [Na(+)](cyt).

Roles of the Na,K-ATPase alpha4 isoform and the Na+/H+ exchanger in sperm motility.

The Na,K-ATPase generates electrochemical gradients that are used to drive the coupled transport of many ions and nutrients across the plasma membrane. The functional enzyme is comprised of an alpha and beta subunit and families of isoforms for both subunits exist. Recent studies in this laboratory have identified a biological role for the Na,K-ATPase alpha4 isoform in sperm motility. Here we further investigate the role of the Na,K-ATPase carrying the alpha4 isoform, showing again that ouabain eliminates sperm motility, and in addition, that nigericin, a H+/K+ ionophore, and monensin, a H+/Na+ ionophore, reinitiate motility. These data, along with the observation that the K+ ionophore valinomycin has no effect on the motility of ouabain-inhibited sperm, suggest that ouabain may change intracellular H+ levels in a manner that is incompatible with sperm motility. We have also localized NHE1 and NHE5, known regulators of intracellular H+ content, to the same region of the sperm as the Na,K-ATPase alpha4 isoform. These data highlight the important role of the Na,K-ATPase alpha4 isoform in regulating intracellular H(+) levels, and provide evidence suggesting the involvement of the Na+/H+ exchanger, which is critical for maintaining normal sperm motility.