Effect of Abiotic Signals on the Accumulation of Saponarin in Barley Leaves in Hydroponics Under Artificial Lights.

Functional flavonoid production is a new agenda in the agricultural industry, and young barley leaves (YBL) are one of the highlighted crops due to their health-beneficial flavonoid, saponarin. For the year-round cultivation of a high saponarin content of YBL, abiotic signal effects on the biosynthesis and metabolism in YBL need to be understood clearly. In this research, the effects of reactive oxygen species (ROS)-related abiotic signals, such as light, potassium, and sodium, were investigated on the biosynthetic metabolism in YBL cultivation under artificial lights. A higher quantity of blue-rich white light (6500 K of light temperature) irradiation enhanced ROS levels and the related enzyme activities (APX and CAT), as well as photosynthesis and saponarin amount, while red-rich white light (3000 K of light temperature) increased the photosynthesis only. In addition, 1.0 g L-1 K+ treatment in water slightly reduced ROS levels and increased saponarin accumulation in YBL. These blue-rich light and K+ supplemental conditions relatively increased OGT expression and reduced 4-coumaric acid and isovitexin as saponarin precursors. Furthermore, the relative ratio of lutonarin as an oxidized product of saponarin increased in increments of light quantity. Finally, the abiotic conditions for saponarin production were optimized with the mixture solution treatment of 1.0 g L-1 Na+ and 1.0 g L-1 K+ under 500 PPFD of 6500 K light, and the saponarin amount per leaf was 219.5 µg plant-1; it was comparable amount with that under sunlight condition.

Enhancing polyethylene degradation: a novel bioprocess approach using Acinetobacter nosocomialis pseudo-resting cells.

Despite the discovery of several bacteria capable of interacting with polymers, the activity of the natural bacterial isolates is limited. Furthermore, there is a lack of knowledge regarding the development of bioprocesses for polyethylene (PE) degradation. Here, we report a bioprocess using pseudo-resting cells for efficient degradation of PE. The bacterial strain Acinetobacter nosocomialis was isolated from PE-containing landfills and characterized using low-density PE (LDPE) surface oxidation when incubated with LDPE. We optimized culture conditions to generate catalytic pseudo-resting cells of A. nosocomialis that are capable of degrading LDPE films in a bioreactor. After 28 days of bioreactor operation using pseudo-resting cells of A. nosocomialis, we observed the formation of holes on the PE film (39 holes per 217 cm2, a maximum diameter of 1440 µm). This study highlights the potential of bacteria as biocatalysts for the development of PE degradation processes. KEY POINTS: • New bioprocess has been proposed to degrade polyethylene (PE). • Process with pseudo-resting cells results in the formation of holes in PE film. • We demonstrated PE degradation using A. nosocomialis as a biocatalyst.

Harnessing lignocellulosic biomass for butanol production through clostridia for sustainable waste management: recent advances and perspectives.

The escalating waste generation rates, driven by population growth, urbanization, and consumption patterns, have made waste management a critical global concern with significant environmental, social, and economic repercussions. Among the various waste sources, lignocellulosic biomass represents a significant proportion of agricultural, agro-industrial, and municipal wastes. Biofuels are gaining attention as a promising substitute to fossil fuels, and butanol is one such biofuel that has been identified as a potential candidate due to its compatibility with existing fuel infrastructure, lower volatility, and higher energy density. Sustainable management of lignocellulosic biomass waste and its utilization in fermentation are viable alternatives to produce butanol via the promising microbial catalyst clostridia. This review provides an overview of lignocellulosic biomass waste management, focusing on recent advances in strain development for butanol production from renewable biomass with an emphasis on future perspectives.

Efforts to install a heterologous Wood-Ljungdahl pathway in Clostridium acetobutylicum enable the identification of the native tetrahydrofolate (THF) cycle and result in early induction of solvents.

Here, we report the construction of a Clostridium acetobutylicum strain ATCC 824 (pCD07239) by heterologous expression of carbonyl branch genes (CD630_0723∼CD630_0729) from Clostridium difficile, aimed at installing a heterologous Wood-Ljungdahl pathway (WLP). As part of this effort, in order to validate the methyl branch of the WLP in the C. acetobutylicum, we performed 13C-tracing analysis on knockdown mutants of four genes responsible for the formation of 5-methyl-tetrahydrofolate (5-methyl-THF) from formate: CA_C3201, CA_C2310, CA_C2083, and CA_C0291. While C. acetobutylicum 824 (pCD07239) could not grow autotrophically, in heterotrophic fermentation, it began producing butanol at the early growth phase (OD600 of 0.80; 0.162 g/L butanol). In contrast, solvent production in the parent strain did not begin until the early stationary phase (OD600 of 7.40). This study offers valuable insights for future research on biobutanol production during the early growth phase.

Complete Genome Sequence of Acinetobacter nosocomialis GNU001, Isolated from a Plastic-Containing Landfill.

Due to the hazard of plastic waste exposed to the environment, microorganisms capable of degrading different polymeric pollutants have gained attention. Here, we report the complete genome sequence of Acinetobacter nosocomialis GNU001, which was isolated from a landfill. The genome was composed of a circular chromosome of 3,850,149 bp and a plasmid.

Environmental toxicity and decomposition of polyethylene.

In the more than 100 years since the invention of plastics, various plastic polymers have been developed that exhibit different characteristics and have been widely used in production and life. In 2020 alone, nearly 400 million tons of plastics were produced globally. However, while plastic such as polyethylene brings us convenience, it also threatens environmental sustainability and human health. Due to insufficient recycling efficiency, millions of tons of polyethylene pollutants accumulate in terrestrial or marine environments each year. Polyethylene is elastic, chemically stable, and non-biodegradable, and the traditional disposal methods include landfilling and incineration. These methods are costly, unsustainable, and further increase the burden on the environment. Therefore, recent research has increasingly focused on the biodegradation of polyethylene. In this work, we briefly summarized polyethylene's properties and environmental toxicity. We also reviewed the recent advances in the biodegradation of polyethylene with a summary of traditional abiotic methods. Finally, we proposed a brief research direction in polyethylene study with the aspect of environmental toxicology and industrial applications of decomposition technology.

Clostridium acetobutylicum atpG-Knockdown Mutants Increase Extracellular pH in Batch Cultures.

ATPase, a key enzyme involved in energy metabolism, has not yet been well studied in Clostridium acetobutylicum. Here, we knocked down the atpG gene encoding the ATPase gamma subunit in C. acetobutylicum ATCC 824 using a mobile group II intron system and analyzed the physiological characteristics of the atpG gene knockdown mutant, 824-2866KD. Properties investigated included cell growth, glucose consumption, production of major metabolites, and extracellular pH. Interestingly, in 2-L batch fermentations, 824-2866KD showed no significant difference in metabolite biosynthesis or cell growth compared with the parent ATCC 824. However, the pH value in 824-2866KD cultures at the late stage of the solventogenic phase was abnormally high (pH 6.12), compared with that obtained routinely in the culture of ATCC 824 (pH 5.74). This phenomenon was also observed in batch cultures of another C. acetobutylicum, BEKW-2866KD, an atpG-knockdown and pta-buk double-knockout mutant. The findings reported in this study suggested that ATPase is relatively minor than acid-forming pathway in ATP metabolism in C. acetobutylicum.

Characterization of an organic solvent-tolerant polysaccharide lyase from Microbulbifer thermotolerans DAU221.

Alginate and its derivatives are annually produced approximately 30,000 tons or more and are applied to various industries as they are natural polymers. The global market for alginate and its derivatives has been growing steadily. There is little research compared to other enzymes produced through biomass degradation or modification. An alginate lyase, MtAl138, from Microbulbifer thermotolerans DAU221 was cloned and identified in Escherichia coli BL21 (DE3). MtAl138 contains a highly conserved motif (R538TELR, Q607IH609, and YFKAGVY716NQ), which indicates that it belongs to the polysaccharide lyase family 7 (PL7). MtAl138, with a molecular weight of 77 kDa worked optimally at 45 °C and pH 7.4. MtAl138 showed twice as much activity as when there was no NaCl when there was between 100 and 600 mM NaCl. Moreover, its activity increased in organic solvents such as benzene, hexane, methanol, and toluene. Based on the thin layer chromatography analyses, MtAl38 is an endo-type enzyme that produces di-, tri-, or tetrasaccharides from polyG and polyM. This study provided that MtAl138 is an endoenzyme that showed outstanding enzymatic activity at concentrated salt solutions and organic solvents, which makes it a reasonably attractive enzyme for use in various industries.

Control of the galactose-to-glucose consumption ratio in co-fermentation using engineered Escherichia coli strains.

Marine biomasses capable of fixing carbon dioxide have attracted attention as an alternative to fossil resources for fuel and chemical production. Although a simple co-fermentation of fermentable sugars, such as glucose and galactose, has been reported from marine biomass, no previous report has discussed the fine-control of the galactose-to-glucose consumption ratio in this context. Here, we sought to finely control the galactose-to-glucose consumption ratio in the co-fermentation of these sugars using engineered Escherichia coli strains. Toward this end, we constructed E. coli strains GR2, GR2P, and GR2PZ by knocking out galRS, galRS-pfkA, and galRS-pfkA-zwf, respectively, in parent strain W3110. We found that strains W3110, GR2, GR2P, and GR2PZ achieved 0.03, 0.09, 0.12, and 0.17 galactose-to-glucose consumption ratio (specific galactose consumption rate per specific glucose consumption rate), respectively, during co-fermentation. The ratio was further extended to 0.67 by integration of a brief process optimization for initial sugar ratio using GR2P strain. The strategy reported in this study will be helpful to expand our knowledge on the galactose utilization under glucose conditions.

Synthetic Biology Tools for Genome and Transcriptome Engineering of Solventogenic Clostridium.

Strains of Clostridium genus are used for production of various value-added products including fuels and chemicals. Development of any commercially viable production process requires a combination of both strain and fermentation process development strategies. The strain development in Clostridium sp. could be achieved by random mutagenesis, and targeted gene alteration methods. However, strain improvement in Clostridium sp. by targeted gene alteration method was challenging due to the lack of efficient tools for genome and transcriptome engineering in this organism. Recently, various synthetic biology tools have been developed to facilitate the strain engineering of solventogenic Clostridium. In this review, we consolidated the recent advancements in toolbox development for genome and transcriptome engineering in solventogenic Clostridium. Here we reviewed the genome-engineering tools employing mobile group II intron, pyrE alleles exchange, and CRISPR/Cas9 with their application for strain development of Clostridium sp. Next, transcriptome engineering tools such as untranslated region (UTR) engineering and synthetic sRNA techniques were also discussed in context of Clostridium strain engineering. Application of any of these discussed techniques will facilitate the metabolic engineering of clostridia for development of improved strains with respect to requisite functional attributes. This might lead to the development of an economically viable butanol production process with improved titer, yield and productivity.

Metabolic Engineering of Escherichia coli for the Production of Hyaluronic Acid From Glucose and Galactose.

Hyaluronic acid is a glycosaminoglycan biopolymer widely present throughout connective and epithelial tissue, and has been of great interest for medical and cosmetic applications. In the microbial production of hyaluronic acid, it has not been established to utilize galactose enabling to be converted to UDP-glucuronic acid, which is a precursor for hyaluronic acid biosynthesis. In this study, we engineered Escherichia coli to produce hyaluronic acid from glucose and galactose. The galactose-utilizing Leloir pathway was activated by knocking out the galR and galS genes encoding the transcriptional repressors. Also, the hasA gene from Streptococcus zooepidemicus was introduced for the expression of hyaluronic acid synthase. The consumption rates of glucose and galactose were modulated by knockout of the pfkA and zwf genes, which encode 6-phosphofructokinase I and glucose-6-phosphate dehydrogenase, respectively. Furthermore, the precursor biosynthesis pathway for hyaluronic acid production was manipulated by separately overexpressing the gene clusters galU-ugd and glmS-glmM-glmU, which enable the production of UDP-glucuronic acid and UDP-N-acetyl-glucosamine, respectively. Batch culture of the final engineered strain produced 29.98 mg/L of hyaluronic acid from glucose and galactose. As a proof of concept, this study demonstrated the production of hyaluronic acid from glucose and galactose in the engineered E. coli.

Metabolic engineering of microorganisms for the production of ethanol and butanol from oxides of carbon.

The utilized biomass is an important consideration for sustainable biofuel production. To avoid competing with food needs, researchers have turned their attention to non-food lignocellulosic biomasses as potential feedstocks for biofuel production. However, the saccharification of a lignocellulosic biomass produces a large amount of lignin as waste. To overcome this hurdle, biomass gasification has been suggested as an alternative to saccharification. During biomass gasification, oxides of carbon (CO, CO2) and hydrogen are produced as a major product. Accordingly, microorganisms capable of utilizing these oxides of carbon have gained attention as hosts for the production of biofuels, such as ethanol and butanol. In this work, we reviewed the Calvin cycle and Wood-Ljungdahl pathway for utilizing oxides of carbon in cyanobacteria and acetogens, respectively, and discussed the metabolic engineering strategies that may be used to produce ethanol and butanol from oxides of carbon through these routes.

Chlorfenapyr Residue in Sweet Persimmon from Farm to Table.

The use of the pesticide chlorfenapyr has been increasing over time, with a consequent wider application to crops. However, there is limited information available on the amount and safety of the residues it leaves on crops. The amount of chlorfenapyr residues in sweet persimmon (Diospyros kaki L.) at both the pre- and postharvest stages were investigated in this study by calculating its biological half-life. The half-life at the preharvest stage was 8.8 days, shorter than that found during the storage periods at 4 and 20°C, when the half-lives were 11.0 and 23.9 days, respectively. In addition, peeling and washing after harvesting reduced residue content. The majority of the chlorfenapyr residues in sweet persimmon were found in the peel of the fruit, with the pulp containing less than 25% of the total. Thus, peeling effectively removed chlorfenapyr residues and diminished the residues below the limit of quantification in the pulp. In addition, washing with 1.0% alcohol and 0.2% Tween 20 solutions effectively removed 47.8 and 55.6% of the residues, respectively. Furthermore, a 1.0% alcohol solution showed high reduction efficiency for other hydrophobic pesticides, such as dimethomorph and fluquinconazole, up to 78.0%. Chlorfenapyr residues in sweet persimmon can be effectively reduced via storage or peeling and washing practices or a combination of them.

Microbial production of butyl butyrate, a flavor and fragrance compound.

Butyl butyrate (BB) has been widely used as a flavor and fragrance compound in the beverage, food, perfume, and cosmetic industries. Currently, BB is produced through two-step processes; butanol and butyrate are first produced and are used as precursors for the esterification reactions to yield BB in the next step. Recently, an alternative process to the current process has been developed by using microorganisms for the one-pot BB production. In the one-pot BB process, alcohol acyl transferases (AATs) and lipases play roles in the esterification of butanol together with their co-substrates butyryl-CoA and butyrate, respectively. In this paper, we review the characteristics of two enzymes including AAT and lipase in the esterification reaction. Also, we review the one-pot processes for BB production by employing the wild-type and engineered Clostridium species and the engineered Escherichia coli strains, with the combination of AATs and lipases.

Engineering Clostridial Aldehyde/Alcohol Dehydrogenase for Selective Butanol Production.

Butanol production by Clostridium acetobutylicum is accompanied by coproduction of acetone and ethanol, which reduces the yield of butanol and increases the production cost. Here, we report development of several clostridial aldehyde/alcohol dehydrogenase (AAD) variants showing increased butanol selectivity by a series of design and analysis procedures, including random mutagenesis, substrate specificity feature analysis, and structure-based butanol selectivity design. The butanol/ethanol ratios (B/E ratios) were dramatically increased to 17.47 and 15.91 g butanol/g ethanol for AADF716L and AADN655H, respectively, which are 5.8-fold and 5.3-fold higher than the ratios obtained with the wild-type AAD. The much-increased B/E ratio obtained was due to the dramatic reduction in ethanol production (0.59 ± 0.01 g/liter) that resulted from engineering the substrate binding chamber and the active site of AAD. This protein design strategy can be applied generally for engineering enzymes to alter substrate selectivity.IMPORTANCE Renewable biofuel represents one of the answers to solving the energy crisis and climate change problems. Butanol produced naturally by clostridia has superior liquid fuel characteristics and thus has the potential to replace gasoline. Due to the lack of efficient genetic manipulation tools, however, clostridial strain improvement has been slower than improvement of other microorganisms. Furthermore, fermentation coproducing various by-products requires costly downstream processing for butanol purification. Here, we report the results of enzyme engineering of aldehyde/alcohol dehydrogenase (AAD) to increase butanol selectivity. A metabolically engineered Clostridium acetobutylicum strain expressing the engineered aldehyde/alcohol dehydrogenase gene was capable of producing butanol at a high level of selectivity.

Metabolic engineering of Clostridium acetobutylicum for the production of butyl butyrate.

Butyl butyrate is widely used as a fragrance additive for foods and beverages. The first step in the currently used process is the production of precursors, including butanol and butyrate, from petroleum using chemical catalysts, followed by the conversion of precursors to butyl butyrate by immobilized lipase. In this work, we engineered Clostridium acetobutylicum for the selective, one-step production of butyl butyrate from glucose. C. acetobutylicum ATCC 824, possessing a strong carbon flux that yields butanol and butyryl-CoA, was selected as a host and was engineered by introducing alcohol acyltransferases (AATs) from Fragaria x ananassa (strawberry) or Malus sp. (apple). Batch culture of the engineered C. acetobutylicum strain CaSAAT expressing the strawberry SAAT gene produced 50.07 mg/L of butyl butyrate with a selectivity of 84.8% of total esters produced. Also, the engineered C. acetobutylicum strain CaAAAT expressing the apple AAAT gene produced 40.60 mg/L of butyl butyrate with a selectivity of 87.4%. This study demonstrated the feasibility of the one-step fermentation of butyl butyrate from glucose in the engineered C. acetobutylicum, as a proof of concept.

Genome analysis of a hyper acetone-butanol-ethanol (ABE) producing Clostridium acetobutylicum BKM19.

Previously the development of a hyper acetone-butanol-ethanol (ABE) producing Clostridium acetobutylicum BKM19 strain capable of producing 30.5% more total solvent by random mutagenesis of its parental strain PJC4BK, which is a buk mutant C. acetobutylicum ATCC 824 strain is reported. Here, BKM19 and PJC4BK strains are re-sequenced by a high-throughput sequencing technique to understand the mutations responsible for enhanced solvent production. In comparison with the C. acetobutylicum PJC4BK, 13 single nucleotide variants (SNVs), one deletion and one back mutation SNV are identified in the C. acetobutylicum BKM19 genome. Except for one SNV found in the megaplasmid, all mutations are found in the chromosome of BKM19. Among them, a mutation in the thlA gene encoding thiolase is further studied with respect to enzyme activity and butanol production. The mutant thiolase (thlAV5A ) is showed a 32% higher activity than that of the wild-type thiolase (thlAWT ). In batch fermentation, butanol production is increased by 26% and 23% when the thlAV5A gene is overexpressed in the wild-type C. acetobutylicum ATCC 824 and in its derivative, the thlA-knockdown TKW-A strain, respectively. Based on structural analysis, the mutation in thiolase does not have a direct effect on the regulatory determinant region (RDR). However, the mutation at the 5th residue seems to influence the stability of the RDR, and thus, increases the enzymatic activity and enhances solvent production in the BKM19 strain.

Deciphering Clostridium tyrobutyricum Metabolism Based on the Whole-Genome Sequence and Proteome Analyses.

UNLABELLED: Clostridium tyrobutyricum is a Gram-positive anaerobic bacterium that efficiently produces butyric acid and is considered a promising host for anaerobic production of bulk chemicals. Due to limited knowledge on the genetic and metabolic characteristics of this strain, however, little progress has been made in metabolic engineering of this strain. Here we report the complete genome sequence of C. tyrobutyricum KCTC 5387 (ATCC 25755), which consists of a 3.07-Mbp chromosome and a 63-kbp plasmid. The results of genomic analyses suggested that C. tyrobutyricum produces butyrate from butyryl-coenzyme A (butyryl-CoA) through acetate reassimilation by CoA transferase, differently from Clostridium acetobutylicum, which uses the phosphotransbutyrylase-butyrate kinase pathway; this was validated by reverse transcription-PCR (RT-PCR) of related genes, protein expression levels, in vitro CoA transferase assay, and fed-batch fermentation. In addition, the changes in protein expression levels during the course of batch fermentations on glucose were examined by shotgun proteomics. Unlike C. acetobutylicum, the expression levels of proteins involved in glycolytic and fermentative pathways in C. tyrobutyricum did not decrease even at the stationary phase. Proteins related to energy conservation mechanisms, including Rnf complex, NfnAB, and pyruvate-phosphate dikinase that are absent in C. acetobutylicum, were identified. Such features explain why this organism can produce butyric acid to a much higher titer and better tolerate toxic metabolites. This study presenting the complete genome sequence, global protein expression profiles, and genome-based metabolic characteristics during the batch fermentation of C. tyrobutyricum will be valuable in designing strategies for metabolic engineering of this strain. IMPORTANCE: Bio-based production of chemicals from renewable biomass has become increasingly important due to our concerns on climate change and other environmental problems. C. tyrobutyricum has been used for efficient butyric acid production. In order to further increase the performance and expand the capabilities of this strain toward production of other chemicals, metabolic engineering needs to be performed. For this, better understanding on the metabolic and physiological characteristics of this bacterium at the genome level is needed. This work reporting the results of complete genomic and proteomic analyses together with new insights on butyric acid biosynthetic pathway and energy conservation will allow development of strategies for metabolic engineering of C. tyrobutyricum for the bio-based production of various chemicals in addition to butyric acid.

Stable and enhanced gene expression in Clostridium acetobutylicum using synthetic untranslated regions with a stem-loop.

Gene overexpression is one of the most basic strategies in metabolic engineering, but the factors determining gene expression levels have been poorly studied in Clostridium species. In this study, we found that a short single-stranded 5' untranslated region (UTR) sequence led to decreased gene expression in Clostridium acetobutylicum. Using an in vitro enzyme assay and reverse transcription-quantitative PCR, we found that addition of a small stem-loop at the 5' end of mRNA increased mRNA levels and thereby protein expression levels up to 4.6-fold, possibly protecting mRNA from exonuclease attack. Gene-expression levels were apparently independent of the stability of the added stem-loop; the existence of a stem-loop itself appears to be more important. Our results indicate that efficient expression cassettes can be designed by taking the 5' UTR into consideration, as the expression levels can vary even though the same promoter and RBS are used. These findings will be useful for developing a more reliable gene expression system for metabolic engineering of Clostridium strains.

Production of succinic acid by metabolically engineered microorganisms.

Succinic acid (SA) has been recognized as one of the most important bio-based building block chemicals due to its numerous potential applications. For the economical bio-based production of SA, extensive research works have been performed on developing microbial strains by metabolic engineering as well as fermentation and downstream processes. Here we review metabolic engineering strategies applied for bio-based production of SA using representative microorganisms, including Saccharomyces cerevisiae, Pichia kudriavzevii, Escherichia coli, Mannheimia succiniciproducens, Basfia succiniciproducens, Actinobacillus succinogenes, and Corynebacterium glutamicum. In particular, strategies employed for developing engineered strains of these microorganisms leading to the best performance indices (titer, yield, and productivity) are showcased based on the published papers as well as patents. Those processes currently under commercialization are also analyzed and future perspectives are provided.