Conformational Locking Control of 2D Outer Side Chains via Fluorine Atom Positioning for Improving the Thermal Stability of Organic Solar Cells.

Alongside high power conversion efficiencies (PCEs), device stability, especially thermal issues, is another key factor for the successful commercialization of nonfullerene acceptor (NFA)-based organic solar cells (OSCs). Considering the significant effects of the side-chain engineering of NFAs on molecular packing and/or locking strongly associated with the thermal stability of OSCs, herein, we present two new isomeric NFAs with 4-fluoro- and 2-fluoro-substituted hexylphenyl two-dimensional (2D) outer side chains (4FY and 2FY, respectively). In contrast with the 2FY having a horizontal stretching conformation, 4FY exhibits a diagonal stretching conformation of the 2D outer side chains and a higher dipole moment, resulting in a huge difference in their crystalline/aggregation characteristics, i.e., 4FY possesses a higher crystallinity with a denser molecular packing than the 2FY neat film, as evidenced by thermal and morphological characterizations. Encouragingly, relative to the one based on 2FY, the OSC based on 4FY delivers a PCE as high as 16.4%, together with excellent thermal stability (88.4% PCE retention under 85 °C for 360 h), which is attributed to a more optimal and robust blend morphology induced by its better compatibility into the used donor component and stronger crystallinity. This work demonstrates that in addition to the improved photovoltaic property, the appropriate F-positioning on the 2D outer side chains can play a key role in controlling their conformations, which can promote the increase of the thermal stability of OSCs.

Efficient and Moisture-Stable Inverted Perovskite Solar Cells via n-Type Small-Molecule-Assisted Surface Treatment.

Defect states at the surface and grain boundaries of perovskite films have been known to be major determinants impairing the optoelectrical properties of perovskite films and the stability of perovskite solar cells (PeSCs). Herein, an n-type conjugated small-molecule additive based on fused-unit dithienothiophen[3,2-b]-pyrrolobenzothiadiazole-core (JY16) is developed for efficient and stable PeSCs, where JY16 possesses the same backbone as the widely used Y6 but with long-linear n-hexadecyl side chains rather than branched side chains. Upon introducing JY16 into the perovskite films, the electron-donating functional groups of JY16 passivate defect states in perovskite films and increase the grain size of perovskite films through Lewis acid-base interactions. Compared to Y6, JY16 exhibits superior charge mobility owing to its molecular packing ability and prevents decomposition of perovskite films under moisture conditions owing to their hydrophobic characteristics, improving the charge extraction ability and moisture stability of PeSCs. Consequently, the PeSC with JY16 shows a high power conversion efficiency of 21.35%, which is higher than those of the PeSC with Y6 (20.12%) and without any additive (18.12%), and outstanding moisture stability under 25% relative humidity, without encapsulation. The proposed organic semiconducting additive will prove to be crucial for achieving highly efficient and moisture stable PeSCs.

γ-Ester-Functionalized 1,1-Dicyanomethylene-3-indanone End-Capped Nonfullerene Acceptors for High-Performance, Annealing-Free Organic Solar Cells.

Modifying the end-capping groups in nonfullerene acceptors (NFAs) is an effective strategy for modulating their properties and that of the entire NFAs. This study reports the synthesis of a novel γ-ester-functionalized IC end-capping group (IC-γe) and its incorporation into the benzothiadiazole-fused central core, yielding isomer-free IC-γe end-capped NFAs, such as Y-IC-γe, Y-FIC-γe, and Y-ClIC-γe. The resultant NFAs exhibited similar absorption profiles but upshifted the lowest unoccupied molecular orbital energy level compared with those of the ester-free analogues, such as Y6 and Y7. Without thermal annealing, an excellent power conversion efficiency (PCE) of 16.4% is realized in the annealing-free OSC based on Y-FIC-γe with the PM6 donor polymer, which outperforms the OSCs based on Y-IC-γe and Y-ClIC-γe. In addition, the OSCs based on asymmetric Y-FIC-γe and Y-ClIC-γe have higher thermal stability with more than 83% PCE retention at an elevated temperature after 456 h than the symmetric Y-IC-γe case. In this study, we not only establish the structure-property relationship regarding the ester functionality and symmetricity tuning on the NFAs but also diagnose the reasons for the best-performing Y-FIC-γe-based OSCs, providing useful information for a novel high-performing NFA design strategy.

Ligand-engineered bandgap stability in mixed-halide perovskite LEDs.

Lead halide perovskites are promising semiconductors for light-emitting applications because they exhibit bright, bandgap-tunable luminescence with high colour purity1,2. Photoluminescence quantum yields close to unity have been achieved for perovskite nanocrystals across a broad range of emission colours, and light-emitting diodes with external quantum efficiencies exceeding 20 per cent-approaching those of commercial organic light-emitting diodes-have been demonstrated in both the infrared and the green emission channels1,3,4. However, owing to the formation of lower-bandgap iodide-rich domains, efficient and colour-stable red electroluminescence from mixed-halide perovskites has not yet been realized5,6. Here we report the treatment of mixed-halide perovskite nanocrystals with multidentate ligands to suppress halide segregation under electroluminescent operation. We demonstrate colour-stable, red emission centred at 620 nanometres, with an electroluminescence external quantum efficiency of 20.3 per cent. We show that a key function of the ligand treatment is to 'clean' the nanocrystal surface through the removal of lead atoms. Density functional theory calculations reveal that the binding between the ligands and the nanocrystal surface suppresses the formation of iodine Frenkel defects, which in turn inhibits halide segregation. Our work exemplifies how the functionality of metal halide perovskites is extremely sensitive to the nature of the (nano)crystalline surface and presents a route through which to control the formation and migration of surface defects. This is critical to achieve bandgap stability for light emission and could also have a broader impact on other optoelectronic applications-such as photovoltaics-for which bandgap stability is required.

High-performance and stable photoelectrochemical water splitting cell with organic-photoactive-layer-based photoanode.

Considering their superior charge-transfer characteristics, easy tenability of energy levels, and low production cost, organic semiconductors are ideal for photoelectrochemical (PEC) hydrogen production. However, organic-semiconductor-based photoelectrodes have not been extensively explored for PEC water-splitting because of their low stability in water. Herein, we report high-performance and stable organic-semiconductors photoanodes consisting of p-type polymers and n-type non-fullerene materials, which is passivated using nickel foils, GaIn eutectic, and layered double hydroxides as model materials. We achieve a photocurrent density of 15.1 mA cm-2 at 1.23 V vs. reversible hydrogen electrode (RHE) with an onset potential of 0.55 V vs. RHE and a record high half-cell solar-to-hydrogen conversion efficiency of 4.33% under AM 1.5 G solar simulated light. After conducting the stability test at 1.3 V vs. RHE for 10 h, 90% of the initial photocurrent density are retained, whereas the photoactive layer without passivation lost its activity within a few minutes.

Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss.

Further improvement and stabilization of perovskite solar cell (PSC) performance are essential to achieve the commercial viability of next-generation photovoltaics. Considering the benefits of fluorination to conjugated materials for energy levels, hydrophobicity, and noncovalent interactions, two fluorinated isomeric analogs of the well-known hole-transporting material (HTM) Spiro-OMeTAD are developed and used as HTMs in PSCs. The structure-property relationship induced by constitutional isomerism is investigated through experimental, atomistic, and theoretical analyses, and the fabricated PSCs feature high efficiency up to 24.82% (certified at 24.64% with 0.3-volt voltage loss), along with long-term stability in wet conditions without encapsulation (87% efficiency retention after 500 hours). We also achieve an efficiency of 22.31% in the large-area cell.

Horizontal-, Vertical-, and Cross-Conjugated Small Molecules: Conjugated Pathway-Performance Correlations along Operation Mechanisms in Ternary Non-Fullerene Organic Solar Cells.

A family of the SM-axis series based on benzo[1,​2-​b:4,​5-​b']​dithiophene and 3-ethylrhodanine (RD) units with structurally different π-conjugation systems are synthesized as a means to understand the structure-property relationship of conjugated pathways in ternary non-fullerene organic solar cells (NF-OSCs) as a third component. The optical and electrochemical properties of the SM-axis are highly sensitive both to the functionalized direction and to the number of RD groups. Enhanced power conversion efficiencies (PCEs) of over 11% in ternary devices are obtained by incorporating optimal SM-X and SM-Y contents from PBDB-T:ITIC binary NF-OSCs, while a slightly lower PCE is observed with the addition of SM-XY. The results of in-depth studies using various characterization techniques demonstrate that working mechanisms of SM-axis-based ternary NF-OSCs are distinctly different from one another: an energy-transfer mechanism with an alloy-like model for SM-X, a charge transfer with the same model for SM-Y, and an energy transfer without such a structure for SM-XY. As extension of the scope, a SM-X-based ternary NF-OSC in the PM6:IT4F system also shows a greatly enhanced PCE of over 13%. The findings provide insights into the effects of conjugated pathways of organic semiconductors on mechanisms of ternary NF-OSCs, advancing the understanding for synthetic chemists, materials engineers, and device physicists.

Multifaceted Role of a Dibutylhydroxytoluene Processing Additive in Enhancing the Efficiency and Stability of Planar Perovskite Solar Cells.

Significant research efforts are currently being devoted to improving both the crystalline quality and stability of lead halide perovskite absorbers to advance the commercial prospects of perovskite-based solar cells. Herein, we report a simple one-step dibutylhydroxytoluene (BHT) additive-based approach for simultaneously improving the crystallinity and resistance of perovskite films under adverse degradation conditions. We found that BHT, commonly known for its antioxidant properties, can considerably improve the performance of methylammonium lead iodide perovskite solar cells by modulating the chemical environment within the precursor medium to form intermediate complexes, and it can also suppress photooxidation, which results in perovskite degradation under environmental operating conditions. Consequently, a device exhibited a significant power conversion efficiency improvement to 18.1% with the BHT-additive-based perovskite absorber, exceeding the 17.1% efficiency achieved for the control device. The BHT additive also improved the perovskite stability by quenching intermediate reactions resulting in perovskite degradation to an undesirable lead iodide phase, as evidenced by detailed analysis of absorption spectra, grazing-incidence wide-angle X-ray scattering, X-ray photoelectron spectra, and photoluminescence measurements.

Influence of Simultaneous Tuning of Molecular Weights and Alkyl Substituents of Poly(thienoisoindigo-alt-naphthalene)s on Morphology and Change Transport Properties.

To simultaneously assess the impact of molecular weight (Mn) and alkyl substituent variations of polymers on the structural and optoelectronic properties, herein, we conduct a systematic study of a series of poly(thienoisoindigo-alt-naphthalene) (PTIIG-Np)-based polymers containing different alkyl substituents (2-hexyldecyl (HD), 2-octyldodecyl (OD), and 2-decyltetradecyl (DT) chains) and Mn's (low (L) and high (H)). All of the polymers produce almost identical energy levels, whereas their optical spectra show a clear dependence on Mn's and the alkyl substituents. Interestingly, increasing the alkyl substituent sizes of the polymers steadily increases the lamellar d-spacings (d100), ultimately leading to a densely packed lamellar structure for PTIIGHD-Np. In addition, both H-PTIIGOD-Np and H-PTIIGDT-Np exhibit larger π-stacking crystallites than the corresponding low-Mn polymers, while for PTIIGHD-Np, their size increases in the low-Mn batch. Ultimately, L-PTIIGHD-Np shows the best hole mobility of 1.87 cm2 V-1 s-1 in top-gate and bottom-contact organic field-effect transistors (OFETs) with a poly(methyl methacrylate), which is nearly 1 order of magnitude higher than other polymers tested in this study. Our results demonstrate that the simultaneous Mn and alkyl substituent engineering of the polymers can optimize their film morphology to produce high-performance OFETs.