Self-Oxidation Resistance of the Curved Surface of Achromatic Copper.

Copper surfaces that exhibit a wide range of achromatic colors while still metallic have not been studied, despite advancements in antireflection coatings. A series of achromatic copper films grown with [111] preferred orientation by depositing 3D porous nanostructures is introduced via coherent/incoherent atomic sputtering epitaxy. The porous copper nanostructures self-regulate the giant oxidation resistance by constructing a curved surface that generates a series of monoatomic steps, followed by shrinkage of the lattice spacing of one or two surface layers. First-principles calculations confirm that these structural components cooperatively increase the energy barrier against oxygen penetration. The achromaticity of the single-crystalline porous copper films is systematically tuned by geometrical parameters such as pore size distribution and 3D linkage. The optimized achromatic copper films with high oxidation resistance show an unusual switching effect between superhydrophilicity and superhydrophobicity. The tailored 3D porous nanostructures can be a candidate material for numerous applications, such as antireflection coatings, microfluidic devices, droplet tweezers, and reversible wettability switches.

Coherent consolidation of trillions of nucleations for mono-atom step-level flat surfaces.

Constructing a mono-atom step-level ultra-flat material surface is challenging, especially for thin films, because it is prohibitively difficult for trillions of clusters to coherently merge. Even though a rough metal surface, as well as the scattering of carriers at grain boundaries, limits electron transport and obscures their intrinsic properties, the importance of the flat surface has not been emphasised sufficiently. In this study, we describe in detail the initial growth of copper thin films required for mono-atom step-level flat surfaces (MSFSs). Deposition using atomic sputtering epitaxy leads to the coherent merging of trillions of islands into a coplanar layer, eventually forming an MSFS, for which the key factor is suggested to be the individual deposition of single atoms. Theoretical calculations support that single sputtered atoms ensure the formation of highly aligned nanodroplets and help them to merge into a coplanar layer. The realisation of the ultra-flat surfaces is expected to greatly assist efforts to improve quantum behaviour by increasing the coherency of electrons.

Enhanced High-Rate Capability and Long Cycle Stability of FeS@NCG Nanofibers for Sodium-Ion Battery Anodes.

The development of advanced hierarchical anode materials has recently become essential to achieving high-performance sodium-ion batteries. Herein, we developed a facile and cost-effective scheme for synthesizing graphene-wrapped, nitrogen-rich carbon-coated iron sulfide nanofibers (FeS@NCG) as an anode for SIBs. The designed FeS@NCG can provide a significant reversible capacity of 748.5 mAh g-1 at 0.3 A g-1 for 50 cycles and approximately 3.9-fold higher electrochemical performance than its oxide analog (Fe2O3@NCG, 192.7 mAh g-1 at 0.3 A g-1 for 50 cycles). The sulfur- and nitrogen-rich multilayer package structure facilitates efficient suppression of the porous FeS volume expansion during the sodiation process, enabling a long cycle life. The intimate contact between graphene and porous carbon-coated FeS nanofibers offers strong structural barriers associated with charge-transfer pathways during sodium insertion/extraction. It also reduces the dissolution of polysulfides, enabling efficient sodium storage with superior stable kinetics. Furthermore, outstanding capacity retention of 535 mAh g-1 at 5 A g-1 is achieved over 1010 cycles. The FeS@NCG also exhibited a specific capacity of 640 mAh g-1 with a Coulombic efficiency of above 99.8% at 5 A g-1 at 80 °C, indicating its development prospects in high-performance SIB applications.

Flat-surface-assisted and self-regulated oxidation resistance of Cu(111).

Oxidation can deteriorate the properties of copper that are critical for its use, particularly in the semiconductor industry and electro-optics applications1-7. This has prompted numerous studies exploring copper oxidation and possible passivation strategies8. In situ observations have, for example, shown that oxidation involves stepped surfaces: Cu2O growth occurs on flat surfaces as a result of Cu adatoms detaching from steps and diffusing across terraces9-11. But even though this mechanism explains why single-crystalline copper is more resistant to oxidation than polycrystalline copper, the fact that flat copper surfaces can be free of oxidation has not been explored further. Here we report the fabrication of copper thin films that are semi-permanently oxidation resistant because they consist of flat surfaces with only occasional mono-atomic steps. First-principles calculations confirm that mono-atomic step edges are as impervious to oxygen as flat surfaces and that surface adsorption of O atoms is suppressed once an oxygen face-centred cubic (fcc) surface site coverage of 50% has been reached. These combined effects explain the exceptional oxidation resistance of ultraflat Cu surfaces.

Abnormally High-Lithium Storage in Pure Crystalline C60 Nanoparticles.

Li+ intercalates into a pure face-centered-cubic (fcc) C60 structure instead of being adsorbed on a single C60 molecule. This hinders the excess storage of Li ions in Li-ion batteries, thereby limiting their applications. However, the associated electrochemical processes and mechanisms have not been investigated owing to the low electrochemical reactivity and poor crystallinity of the C60 powder. Herein, a facile method for synthesizing pure fcc C60 nanoparticles with uniform morphology and superior electrochemical performance in both half- and full-cells is demonstrated using a 1 m LiPF6 solution in ethylene carbonate/diethyl carbonate (1:1 vol%) with 10% fluoroethylene carbonate. The specific capacity of the C60 nanoparticles during the second discharge reaches ≈750 mAh g-1 at 0.1 A g-1 , approximately twice that of graphite. Moreover, by applying in situ X-ray diffraction, high-resolution transmission electron microscopy, and first-principles calculations, an abnormally high Li storage in a crystalline C60 structure is proposed based on the vacant sites among the C60 molecules, Li clusters at different sites, and structural changes during the discharge/charge process. The fcc of C60 transforms tetragonal via orthorhombic Lix C60 and back to the cubic phase during discharge. The presented results will facilitate the development of novel fullerene-based anode materials for Li-ion batteries.

High speed growth of MAPbBr3 single crystals via low-temperature inverting solubility: enhancement of mobility and trap density for photodetector applications.

There has been growing interest in organic-inorganic hybrid perovskites as a promising candidate for optoelectronic applications due to their superior physical properties. Despite this, most of the reported perovskite devices based on polycrystalline thin films suffer immensely from poor stability and high trap density owing to grain boundaries limiting their performance. Perovskite single crystal structures have been recently explored to construct stable devices and reduce the trap density compared to their thin-film counterparts. We present a novel method of growing sizable CH3NH3PbBr3 single crystals based on the high solubility characteristic of hybrid perovskites at low temperatures within inverse temperature crystallization. We compared both the crystallinity of perovskite single crystal structures and optoelectronic charge transport of single crystal photodetectors as a function of dissolution temperature. The performance of the photodetector fabricated with our large-scaled single crystal with high quality demonstrated low trap density, high mobility, and high photoresponse.

Color of Copper/Copper Oxide.

Stochastic inhomogeneous oxidation is an inherent characteristic of copper (Cu), often hindering color tuning and bandgap engineering of oxides. Coherent control of the interface between metal and metal oxide remains unresolved. Coherent propagation of an oxidation front in single-crystal Cu thin film is demonstrated to achieve a full-color spectrum for Cu by precisely controlling its oxide-layer thickness. Grain-boundary-free and atomically flat films prepared by atomic-sputtering epitaxy allow tailoring of the oxide layer with an abrupt interface via heat treatment with a suppressed temperature gradient. Color tuning of nearly full-color red/green/blue indices is realized by precise control of the oxide-layer thickness; the samples cover ≈50.4% of the standard red/green/blue color space. The color of copper/copper oxide is realized by the reconstruction of the quantitative yield color from the oxide "pigment" (complex dielectric functions of Cu2 O) and light-layer interference (reflectance spectra obtained from the Fresnel equations) to produce structural color. Furthermore, laser-oxide lithography is demonstrated with micrometer-scale linewidth and depth through local phase transformation to oxides embedded in the metal, providing spacing necessary for semiconducting transport and optoelectronics functionality.

Layer-controlled single-crystalline graphene film with stacking order via Cu-Si alloy formation.

Multilayer graphene and its stacking order provide both fundamentally intriguing properties and technological engineering applications. Several approaches to control the stacking order have been demonstrated, but a method of precisely controlling the number of layers with desired stacking sequences is still lacking. Here, we propose an approach for controlling the layer thickness and crystallographic stacking sequence of multilayer graphene films at the wafer scale via Cu-Si alloy formation using direct chemical vapour deposition. C atoms are introduced by tuning the ultra-low-limit CH4 concentration to form a SiC layer, reaching one to four graphene layers at the wafer scale after Si sublimation. The crystallographic structure of single-crystalline or uniformly oriented bilayer (AB), trilayer (ABA) and tetralayer (ABCA) graphene are determined via nano-angle-resolved photoemission spectroscopy, which agrees with theoretical calculations, Raman spectroscopy and transport measurements. The present study takes a step towards the layer-controlled growth of graphite and other two-dimensional materials.

Dual functional nanoparticles containing SOX duo and ANGPT4 shRNA for osteoarthritis treatment.

In our previous studies, we found that adult stem cells transfected with sex-determining region Y-box (SOX)-9, -6 and -5 genes (SOX trio) enhanced chondrogenesis and suppressed the progression of osteoarthritis (OA). The inhibition of angiopoietin-like 4 (ANGPT4) is known to reduce levels of cartilage damaging enzymes, such as, matrix metalloproteinases (MMPs). In this study, we designed nanoparticles comprising dexamethasone-conjugated polyethylenimine (DEX PEI) complexed with minicircle plasmid (MC) harboring SOX duo (SOX-9, -6) and ANGPTL4 small hairpin RNA (shANG) [MC SOX9/6/shANG] in the expectation that transfection of these nanoparticles would enhance chondrogenesis of stem cells and suppress inflammation in OA. Adipose-derived stem cells (ADSCs) transfected with MC SOX9/6/shANG (MC SOX9/6/shANG-tADSCs) showed significantly higher expressions of COL2 gene and protein than MC SOX9/6-transfected ADSCs (MC SOX9/6-tADSCs) during in vitro chondrogenesis while both enhanced chondrogenesis in the absence of growth factor addition as compared with negative controls. Furthermore, the expressions of MMP13 and MMP3 genes were significantly more diminished in MC SOX9/6/shANG-tADSCs than in MC SOX9/6-tADSCs. In vivo experiments using surgically-induced OA rats showed MC SOX9/6/shANG-tADSC-treated rats had significantly lower levels of cyclooxygenase (COX-2) and MMP13 in synovial fluids than MC SOX9/6-tADSC-treated rats, but no significant difference was observed between them in histological appearances. Both groups showed significantly less joint destruction than control groups did. These results demonstrate that dual functional nanoparticles containing SOX duo and ANGPT4 shRNA enhance chondrogenesis of ADSCs and suppress inflammation in OA. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 108B:234-242, 2020.

A study of the density of states of ZnCoO:H from resistivity measurements.

Understanding the electronic band structure and density of states (DOS) of a material and their relationship to the associated electronic transport properties is the starting point for optimizing the performance of a device and its technological applications. In a hydrogenated Zn0.8Co0.2O (ZnCoO:H) film with an inverted thin-film transistor structure, we found ambipolar behavior, which is shown in many field-effect devices based on graphene, graphene nanoribbons, and organic semiconductors. In this study, to obtain information on the DOS of ZnCoO:H to explain the ambipolar behavior in terms of the carrier density and type, resistivity and magnetoresistance measurements of a ZnCoO:H film were performed at 5 K. Our proposed DOS representation of ZnCoO:H explains qualitatively the experimental observations of carrier density modulation and ambipolar behavior. First-principles calculations of the DOS of ZnCoO:H were in good agreement with the proposed DOS representation. Through a comparison of first-principles calculations and experimental data, evidence for the existence of Co-H-Co in ZnCoO:H is suggested.

Formation of ferromagnetic Co-H-Co complex and spin-polarized conduction band in Co-doped ZnO.

Magnetic oxide semiconductors with wide band gaps have promising spintronic applications, especially in the case of magneto-optic devices. Co-doped ZnO (ZnCoO) has been considered for these applications, but the origin of its ferromagnetism has been controversial for several decades and no substantial progress for a practical application has been made to date. In this paper, we present direct evidence of hydrogen-mediated ferromagnetism and spin polarization in the conduction band of ZnCoO. Electron density mapping reveals the formation of Co-H-Co, in agreement with theoretical predictions. Electron spin resonance measurement elucidates the ferromagnetic nature of ZnCoO by the formation of Co-H-Co. We provide evidence from magnetic circular dichroism measurements supporting the hypothesis that Co-H-Co contributes to the spin polarization of the conduction band of hydrogen-doped ZnCoO.

Hyaluronic Acid Hydrogel Functionalized with Self-Assembled Micelles of Amphiphilic PEGylated Kartogenin for the Treatment of Osteoarthritis.

Synthetic hyaluronic acid (HA) containing a covalently integrated drug is capable of releasing therapeutic molecules and is an attractive candidate for the intra-articular treatment of osteoarthritis (OA). Herein, self-assembled PEGylated kartogenin (PEG/KGN) micelles consisting of hydrophilic polyethylene glycol (PEG) and hydrophobic KGN, which has been shown to induce chondrogenesis in human mesenchymal stem cells, were prepared by covalent crosslinking. HA hydrogels containing PEG/KGN micelles (HA/PEG/KGN) were prepared by covalently bonding PEG chains to HA. The physicochemical properties of the HA/PEG/KGN conjugate gels were investigated using Fourier transform infrared spectroscopy, 1H NMR, dynamic light scattering (DLS), and scanning electron microscopy (SEM). HA/PEG/KGN gels exhibited larger micelles in aqueous solution than PEG/KGN. SEM images of PEG/KGN micelles showed a dark core and a bright shell, whereas PEG/KGN micelles covalently integrated into HA had an irregular oval shape. Covalent integration of PEG/KGN micelles in HA hydrogels significantly reduced drug release rates and provided sustained release over a prolonged period of time. HA/PEG/KGN hydrogels were degradable enzymatically by collagenase and hyaluronidase in vitro. Injection of HA/PEG/KGN hydrogels into articular cartilage significantly suppressed the progression of OA in rats compared with free-HA hydrogel injection. These results suggest that the HA/PEG/KGN hydrogels have greater potency than free-HA hydrogels against OA as biodegradable synthetic therapeutics.

Angiopoietin-2 Enhances Osteogenic Differentiation of Bone Marrow Stem Cells.

Our previous studies revealed that co-transplantation of bone marrow stem cells (BMSCs) and adipose-derived stem cells (ADSCs) can enhance bone regeneration and angiogenesis. However, it is unclear which genes are involved in the regulation of osteogenesis and/or angiogenesis during the co-culturing of BMSCs and ADSCs. The expression patterns of genes associated with osteogenesis and/or angiogenesis were analyzed in osteogenesis-induced BMSCs and ADSCs using an oligonucleotide microarray. Significant difference in the expression patterns of several genes were identified from hierarchical clustering and analyzed on co-cultured BMSCs and ADSCs. Angiopoietin-2 (ANGPT2) and activin receptor-like kinase-1 were significantly down-regulated in co-culture than culture of either BMSCs or ADSCs, while fibroblast growth factor-9 was significantly up-regulated in co-culture. The effect of ANGPT2 in osteogenesis-induced BMSCs was validated using recombinant protein and siRNA of ANGPT2. Treatment of the ANGPT2 protein significantly increased the expressions of osteogenic makers and the intensity of Alizarin red-S staining in BMSCs. Down-regulation of ANGPT2 significantly decreased the expression of osteogenic makers. The treatment of ANGPT2 protein to BMSCs induced significantly increased tube formation in Transwell-co-cultured human umbilical vein endothelial cells (HUVECs) compared with untreated control. ANGPT2 siRNA transfection showed the opposite effects. These results suggest that the treatment of ANGPT2 in BMSCs increase osteogenesis and angiogenesis in vitro, and that the enhancement of osteogenesis and angiogenesis in the co-cultured BMSCs and ADSCs seems to be mediated by a mechanism that makes the activation of ANGPT2 unnecessary. These observations provide the first evidence for positive regulation of osteogenesis by ANGPT2 in vitro. J. Cell. Biochem. 118: 2896-2908, 2017. © 2017 Wiley Periodicals, Inc.

Synergistically Enhanced Electrochemical Performance of Hierarchical MoS2/TiNb2O7 Hetero-nanostructures as Anode Materials for Li-Ion Batteries.

As potential high-performance anodes for Li-ion batteries (LIBs), hierarchical heteronanostructures consisting of TiNb2O7 nanofibers and ultrathin MoS2 nanosheets (TNO@MS HRs) were synthesized by simple electrospinning/hydrothermal processes. With their growth mechanism revealed, the TNO@MS HRs exhibited an entangled structure both for their ionic and electronic conducting pathways, which enabled the synergetic combination of one- and two-dimensional structures to be realized. In the potential range of 0.001-3 V vs Li/Li+, the TNO@MS HR-based LIBs exhibited high capacities of 872 and 740 mAh g-1 after 42 and 200 cycles at a current density of 1 A g-1, respectively, and excellent rate performance of 611 mAh g-1 at 4 A g-1. We believe that the fabrication route of TNO@MS HRs will find visibility for the use of anode electrodes for high capacity LIBs at low cost.

Multiple pathways of crystal nucleation in an extremely supersaturated aqueous potassium dihydrogen phosphate (KDP) solution droplet.

Solution studies have proposed that crystal nucleation can take more complex pathways than previously expected in classical nucleation theory, such as formation of prenucleation clusters or densified amorphous/liquid phases. These findings show that it is possible to separate fluctuations in the different order parameters governing crystal nucleation, that is, density and structure. However, a direct observation of the multipathways from aqueous solutions remains a great challenge because heterogeneous nucleation sites, such as container walls, can prevent these paths. Here, we demonstrate the existence of multiple pathways of nucleation in highly supersaturated aqueous KH2PO4 (KDP) solution using the combination of a containerless device (electrostatic levitation), and in situ micro-Raman and synchrotron X-ray scattering. Specifically, we find that, at an unprecedentedly deep level of supersaturation, a high-concentration KDP solution first transforms into a metastable crystal before reaching stability at room temperature. However, a low-concentration solution, with different local structures, directly transforms into the stable crystal phase. These apparent multiple pathways of crystallization depend on the degree of supersaturation.

Wafer-Scale Single-Crystalline AB-Stacked Bilayer Graphene.

Single-crystalline artificial AB-stacked bilayer graphene is formed by aligned transfer of two single-crystalline monolayers on a wafer-scale. The obtained bilayer has a well-defined interface and is electronically equivalent to exfoliated or direct-grown AB-stacked bilayers.

Efficiencies of Dye-Sensitized Solar Cells with Hollow SnO2 Nanofiber/TiO2 Nanoparticle Composite Photoanodes.

In this study, we present dye-sensitized solar cells (DSSCs) with improved efficiencies by using SnO2/TiO2 composite photoanodes containing SnO2 at various concentrations. The composites consisted of hollow nanofibers (h-NFs) of SnO2 and TiO2 nanoparticles (NPs). The combination of the large surface area of the NPs and the efficient charge transport in the h-NFs make the use of the SnO2/TiO2 composites advantageous. DSSCs in which composite photoanodes with 50 wt% h-NFs were incorporated showed enhanced efficiencies that were 20% higher than the efficiencies of cells containing TiO2 NP-based photoanodes. These results indicated the improved electron diffusion length and shorter electron transfer time in the composite structures due to the crosslinking between h-NFs and NPs.