RESUMEN
We report a mode-locked Alexandrite single pulse laser with cavity dumping. Mode locking was achieved by using an AOM and an EOM was used for Q-switching and cavity dumping. The instability of the single pulse laser energy output was reduced down to a tenth of that of the conventional single trigger system by introducing a novel double trigger system. The single pulse laser energy and pulse width were 100 mJ and 475 ps in multiple mode and 12.5 mJ and 275 ps in single mode, obtained without a laser amplifier.
RESUMEN
We report the first investigation results of the nonlinear optical properties of As2Te3. More specifically, the nonlinear optical absorption properties of the prepared α-As2Te3 were investigated at wavelengths of 1.56 and 1.9 µm using the open-aperture (OA) Z-scan technique. Using the OA Z-scan technique, the nonlinear absorption coefficients (ß) of α-As2Te3 were estimated in a range from (- 54.8 ± 3.4) × 104 cm/GW to (- 4.9 ± 0.4) × 104 cm/GW depending on the irradiance of the input beam at 1.56 µm, whereas the values did from (- 19.8 ± 0.8) × 104 cm/GW to (- 3.2 ± 0.1) × 104 cm/GW at 1.9 µm. In particular, the ß value at 1.56 µm is an order of magnitude larger than the previously reported values of other group-15 sesquichalcogenides such as Bi2Se3, Bi2Te3, and Bi2TeSe2. Furthermore, this is the first time report on ß value of a group-15 sesquichalcogenide at a 1.9-µm wavelength. The density functional theory (DFT) calculations of the electronic band structures of α-As2Te3 were also conducted to obtain a better understanding of their energy band structure. The DFT calculations indicated that α-As2Te3 possess sufficient optical absorption in a wide wavelength region, including 1.5 µm, 1.9 µm, and beyond (up to 3.7 µm). Using both the measured nonlinear absorption coefficients and the theoretically obtained refractive indices from the DFT calculations, the imaginary parts of the third-order optical susceptibilities (Im χ(3)) of As2Te3 were estimated and they were found to vary from (- 39 ± 2.4) × 10-19 m2/V2 to (- 3.5 ± 0.3) × 10-19 m2/V2 at 1.56 µm and (- 16.5 ± 0.7) × 10-19 m2/V2 to (- 2.7 ± 0.1) × 10-19 m2/V2 at 1.9 µm, respectively, depending on the irradiance of the input beam. Finally, the feasibility of using α-As2Te3 for SAs was investigated, and the prepared SAs were thus tested by incorporating them into an erbium (Er)-doped fiber cavity and a thulium-holmium (Tm-Ho) co-doped fiber cavity for both 1.5 and 1.9 µm operation.
RESUMEN
Photosensitive materials contain biologically engineered elements and are constructed using delicate techniques, with special attention devoted to efficiency, stability, and biocompatibility. However, to date, no photosensitive material has been developed to replace damaged visual-systems to detect light and transmit the signal to a neuron in the human body. In the current study, artificial nanovesicle-based photosensitive materials are observed to possess the characteristics of photoreceptors similar to the human eye. The materials exhibit considerably effective spectral characteristics according to each pigment. Four photoreceptors originating from the human eye with color-distinguishability are produced in human embryonic kidney (HEK)-293 cells and partially purified in the form of nanovesicles. Under various wavelengths of visible light, electrochemical measurements are performed to analyze the physiological behavior and kinetics of the photoreceptors, with graphene, performing as an electrode, playing an important role in the lipid bilayer deposition and oxygen reduction processes. Four nanovesicles with different photoreceptors, namely, rhodopsin (Rho), short-, medium-, and longwave sensitive opsin 1 (1SW, 1MW, 1LW), show remarkable color-dependent characteristics, consistent with those of natural human retina. With four different light-emitting diodes for functional verification, the photoreceptors embedded in nanovesicles show remarkably specific color sensitivity. This study demonstrates the potential applications of light-activated platforms in biological optoelectronic industries.
RESUMEN
A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.
RESUMEN
We report a new efficient light guidance along a liquid core using an open V-groove. Guiding properties were analyzed using finite element method in terms of the single mode guidance condition, and the corresponding modal birefringence. We experimentally demonstrated a silica V-groove fiber with an opening angle of 40°, which was spliced to single mode fibers at both ends. A liquid with the refractive index of 1.455 was filled to serve as a core along a maximum length of 47cm. We confirmed the single mode guidance and birefringence consistent to theory, which will enable polarimetric liquid sensing.
RESUMEN
Surface plasmon polaritons have attracted broad attention in the optoelectronics field due to their ability to merge nanoscale electronics with high-speed optical communication. As the complexity of optoelectronic devices increases to meet various needs, this integration has been hampered by the low coupling efficiency of light to plasmonic modes. Here we present a method to maximize the coupling of far-field optical waves to plasmonic waves for arbitrarily complex devices. The method consists of experimentally identifying the eigenchannels of a given nanostructure and shaping the wavefront of incident light to a particular eigenchannel that maximizes the generation of plasmonic waves. Our proposed approach increases the coupling efficiency almost four-fold with respect to the uncontrolled input. Our study will help to facilitate the integration of electronics and photonics.
RESUMEN
We present terahertz (THz) transmission control by several uniquely designed patterns of nano-slot antenna array. Collinearly aligned slot antenna arrays have been usually applied to THz filters with frequency band tunability by their geometry. Normally the amplitude in transmission (reflection) in the collinear alignment case can be varied via rotating the azimuthal angle with a sinusoidal trend, which can limit their utilization and performance only at fixed angle between the alignment of the resonant antennas and incident beam polarization. To pursue a variety of metamaterial uses, here, we present polarization-independent THz filters using variously aligned antenna array (asterisk, chlorophyll, and honeycomb patterns) in such counter-intuitive aspects. Besides, unprecedented multi resonance behaviors were observed in chlorophyll and honeycomb patterns, which can be explained with interferences by adjacent structures. The measured spectra were analyzed by harmonic oscillator model with simplified coupling between slots and their adjacent.
RESUMEN
2D transition metal carbides, nitrides, and carbonitides called MXenes have attracted much attention due to their outstanding properties. However, MXene's potential in laser technology is not explored. It is demonstrated here that Ti3 CN, one of MXene compounds, can serve as an excellent mode-locker that can produce femtosecond laser pulses from fiber cavities. Stable laser pulses with a duration as short as 660 fs are readily obtained at a repetition rate of 15.4 MHz and a wavelength of 1557 nm. Density functional theory calculations show that Ti3 CN is metallic, in contrast to other 2D saturable absorber materials reported so far to be operative for mode-locking. 2D structural and electronic characteristics are well conserved in their stacked form, possibly due to the unique interlayer coupling formed by MXene surface termination groups. Noticeably, the calculations suggest a promise of MXenes in broadband saturable absorber applications due to metallic characteristics, which agrees well with the experiments of passively Q-switched lasers using Ti3 CN at wavelengths of 1558 and 1875 nm. This study provides a valuable strategy and intuition for the development of nanomaterial-based saturable absorbers opening new avenues toward advanced photonic devices based on MXenes.
RESUMEN
Merging multiple microprocessors with high-speed optical networks has been considered a promising strategy for the improvement of overall computation power. However, the loss of the optical communication bandwidth is inevitable when interfacing between optical and electronic components. Here we present an on-chip plasmonic switching device consisting of a two-dimensional (2D) disordered array of nanoholes on a thin metal film that can provide multiple-input and multiple-output channels for transferring information from a photonic to an electronic platform. In this device, the surface plasmon polaritons (SPPs) generated at individual nanoholes become uncorrelated on their way to the detection channel due to random multiple scattering. We exploit this decorrelation effect to use individual nanoholes as independent antennas, and demonstrated that more than 40 far-field incident channels can be delivered simultaneously to the SPP channels, an order of magnitude improvement over conventional 2D patterned devices.
RESUMEN
We experimentally demonstrate the use of a bulk-like, MoSe2-based saturable absorber (SA) as a passive harmonic mode-locker for the production of femtosecond pulses from a fiber laser at a repetition rate of 3.27 GHz. By incorporating a bulk-like, MoSe2/PVA-composite-deposited side-polished fiber as an SA within an erbium-doped-fiber-ring cavity, mode-locked pulses with a temporal width of 737 fs to 798 fs can be readily obtained at various harmonic frequencies. The fundamental resonance frequency and the maximum harmonic-resonance frequency are 15.38 MHz and 3.27 GHz (212th harmonic), respectively. The temporal and spectral characteristics of the output pulses are systematically investigated as a function of the pump power. The output pulses exhibited Gaussian-temporal shapes irrespective of the harmonic order, and even when their spectra possessed hyperbolic-secant shapes. The saturable absorption and harmonic-mode-locking performance of our prepared SA are compared with those of previously demonstrated SAs that are based on other transition metal dichalcogenides (TMDs). To the best of the authors' knowledge, the repetition rate of 3.27 GHz is the highest frequency that has ever been demonstrated regarding the production of femtosecond pulses from a fiber laser that is based on SA-induced passive harmonic mode-locking.
RESUMEN
Recently, evidence was presented that certain single-walled carbon nanotubes (SWNTs) possess helical defective traces, exhibiting distinct cleaved lines, yet their mechanical characterization remains a challenge. On the basis of the spiral growth model of SWNTs, here we present atomic details of helical defects and investigate how the tensile behaviors of SWNTs change with their presence using molecular dynamics simulations. SWNTs have exhibited substantially lower tensile strength and strain than theoretical results obtained from a seamless tubular structure, whose physical origin cannot be explained either by any known SWNT defects so far. We find that this long-lasting puzzle could be explained by assuming helical defects in SWNTs, exhibiting excellent agreement with experimental observation. The mechanism of this tensile process is elucidated by analyzing atomic stress distribution and evolution, and the effects of the chirality and diameter of SWNTs on this phenomenon are examined based on linear elastic fracture mechanics. This work contributes significantly to our understanding of the growth mechanism, defect hierarchies, and mechanical properties of SWNTs.
RESUMEN
Tungsten ditelluride (WTe2) is a layered material that exhibits excellent magnetoresistance and thermoelectric behaviors, which are deeply related with its distorted orthorhombic phase that may critically affect the lattice dynamics of this material. Here, we report comprehensive characterization of Raman spectra of WTe2 from bulk to monolayer using experimental and computational methods. We find that mono and bi-layer WTe2 are easily identified by Raman spectroscopy since two or one Raman modes that are observed in higher-layer WTe2 are greatly suppressed below the noise level in the mono- and bi-layer WTe2, respectively. In addition, the frequency of in-plane A1(7) mode of WTe2 remains almost constant as the layer number decreases, while all the other Raman modes consistently blueshift, which is completely different from the vibrational behavior of hexagonal metal dichalcogenides. First-principles calculation validates experimental results and reveals that anomalous lattice vibrations in WTe2 are attributed to the formation of tungsten chains that make WTe2 structurally one-dimensional.
RESUMEN
The modification of deoxyribonucleic acid (DNA) samples by sequencing the order of bases and doping copper ions opens the possibility for the design of novel nanomaterials exhibiting large optical nonlinearity. We investigated the nonlinear characteristics of copper-ion doped double crossover DNA samples for the first time to the best of our knowledge by using Z-scan and four-wave mixing methods. To accelerate the nonlinear characteristics, we prepared two types of unique DNA nanostructures composed of 148 base pairs doped with copper ions with a facile annealing method. The outstanding third-order nonlinear optical susceptibility of the copper-ion-doped DNA solution, 1.19 × 10(-12) esu, was estimated by the conventional Z-scan measurement, whereas the four-wave mixing experiment was also investigated. In the visible spectral range, the copper-ion-doped DNA solution samples provided competent four-wave mixing signals with a remarkable conversion efficiency of -4.15 dB for the converted signal at 627 nm. The interactions between DNA and copper ions contribute to the enhancement of nonlinearity due to structural and functional changes. The present study signifies that the copper-ion-doped double crossover DNA is a potential candidate as a highly efficient novel material for further nonlinear optical applications.
Asunto(s)
Cobre/química , ADN/química , Nanoestructuras/químicaRESUMEN
We demonstrate the use of an all-fiberized, mode-locked 1.94 µm laser with a saturable absorption device based on a tungsten disulfide (WS2)-deposited side-polished fiber. The WS2 particles were prepared via liquid phase exfoliation (LPE) without centrifugation. A series of measurements including Raman spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM) revealed that the prepared particles had thick nanostructures of more than 5 layers. The prepared saturable absorption device used the evanescent field interaction mechanism between the oscillating beam and WS2 particles and its modulation depth was measured to be ~10.9% at a wavelength of 1925 nm. Incorporating the WS2-based saturable absorption device into a thulium-holmium co-doped fiber ring cavity, stable mode-locked pulses with a temporal width of ~1.3 ps at a repetition rate of 34.8 MHz were readily obtained at a wavelength of 1941 nm. The results of this experiment confirm that WS2 can be used as an effective broadband saturable absorption material that is suitable to passively generate pulses at 2 µm wavelengths.
RESUMEN
We experimentally demonstrate femtosecond harmonic mode-locking of a fiber laser using a bulk-structured Bi(2)Te(3) topological insulator (TI)-deposited on a side-polished fiber as a mode-locker. A bulk-structured Bi(2)Te(3) TI film was prepared at a thickness of ~20 µm using a mechanical exfoliation method. Using the mode-locker in an erbium-doped fiber ring cavity, it was experimentally shown that harmonically mode-locked pulses with temporal widths of 630 ~700 fs could readily be generated upto the 55th harmonics. The pulse repetition rate was shown to be tunable from the fundamental resonance frequency of 14.07 MHz to the harmonic frequency of 773.85 MHz with increasing pump power. The pumping efficiency was measured at ~3.36 MHz/mW. The side mode suppression ratio (SMSR) was observed to be more than 27.3 dB over all harmonic orders, while the corresponding signal-to-noise ratio (SNR) ranged from 46.3 to 63 dB.
RESUMEN
Control of near-field waves is the key to going beyond the diffraction limit in imaging and manipulating target objects. Here we present the focusing of plasmonic waves, a type of near-field waves, by the wavefront shaping of far-field waves. We coupled far-field waves to a random array of holes on a thin gold film to generate speckled plasmonic waves. By controlling the phase pattern of the incident waves with the wavelength of 637 nm, we demonstrated the focusing of plasmonic waves down to 170 nm at arbitrary positions. Our study shows the possibility of using disordered nanoholes as a plasmonic lens with high flexibility in the far-field control.
RESUMEN
We experimentally demonstrate the use of a bulk-structured Bi(2)Te(3) topological insulator (TI) as an ultrafast mode-locker to generate femtosecond pulses from an all-fiberized cavity. Using a saturable absorber based on a mechanically exfoliated layer about 15 µm thick deposited onto a side-polished fiber, we show that stable soliton pulses with a temporal width of ~600 fs can readily be produced at 1547 nm from an erbium fiber ring cavity. Unlike previous TI-based mode-locked laser demonstrations, in which high-quality nanosheet-based TIs were used for saturable absorption, we chose to use a bulk-structured Bi(2)Te(3) layer because it is easy to fabricate. We found that the bulk-structured Bi(2)Te(3) layer can readily provide sufficient nonlinear saturable absorption for femtosecond mode-locking even if its modulation depth of ~15.7% is much lower than previously demonstrated nanosheet-structured TI-based saturable absorbers. This experimental demonstration indicates that high-crystalline-quality atomic-layered films of TI, which demand complicated and expensive material processing facilities, are not essential for ultrafast laser mode-locking applications.
RESUMEN
An in-depth experimental investigation was conducted into the use of a graphene oxide-based saturable absorber implemented on a side-polished fiber platform for femtosecond pulse generation in the 2 µm region. First, it was experimentally shown that an all-fiberized thulium-holmium (Tm-Ho)-codoped fiber ring laser with reduced cavity length can produce stable femtosecond pulses by incorporating a graphene oxide-deposited side-polished fiber. Second, the measurement accuracy issue in obtaining a precise pulse-width value by use of an autocorrelator together with a silica fiber-based 2 µm-band amplifier was investigated. It showed that the higher-order soliton compression effect caused by the combination of anomalous dispersion and Kerr nonlinearity can provide incorrect pulse-width information. Third, an experimental investigation into the precise role of the graphene oxide-deposited side-polished fiber was carried out to determine whether its polarization-dependent loss (PDL) can be a substantial contributor to mode-locking through nonlinear polarization rotation. By comparing its performance with that of a gold-deposited side-polished fiber, the PDL contribution to mode-locking was found to be insignificant, and the dominant mode-locking mechanism was shown to be saturable absorption due to mutual interaction between the evanescent field of the oscillated beam and the deposited graphene oxide particles.
RESUMEN
We have constructed a wireless monitoring test platform with a sub-nA resolution signal amplification/processing circuit (SAPC) and a wireless communication network to test the real-time remote monitoring of the signals from carbon nanotube (CNT) sensors. The operation characteristics of the CNT sensors can also be measured by the ISD-VSD curve with the SAPC. The SAPC signals are transmitted to a personal computer by Bluetooth communication and the signals from the computer are transmitted to smart phones by Wi-Fi communication, in such a way that the signals from the sensors can be remotely monitored through a web browser. Successful remote monitoring of signals from a CNT sensor was achieved with the wireless monitoring test platform for detection of 0.15% methanol vapor with 0.5 nA resolution and 7 Hz sampling rate.
RESUMEN
We present the results of an investigation regarding a Q-switched mode-locked fiber laser scheme based on a cavity modulation frequency detuning technique. The approach is based on undamped laser relaxation oscillations occurring due to frequency detuning in the fundamental cavity resonance frequency. Through a range of experiments with an erbium-doped, fiber-based, ring-cavity laser, this approach has been shown to be capable of generating high-quality Q-switched mode-locked pulses from an optical fiber-based laser. The maximum frequency detuning range for a stable Q-switched mode-locking operation has been observed to vary depending on the pump power used. We found that the highest pulse peak power was obtained at the frequency detuning threshold at which the operation changed from the mode-locking to the Q-switched mode-locking regime.