Interferometric polarization compensation based on one single polarization-maintaining fiber.

In an interferometry system based on one single polarization-maintaining fiber (PMF), defects like the laser's ellipticity, the alignment error between the PMF and the laser source, and the PMF's internal stress will cause the emitted light from the PMF to be incompletely linearly polarized, resulting in nonlinear errors that cannot be ignored. This paper proposes a novel method that can realize polarization compensation for heterodyne interferometry, reduce the ellipticity of the emitted light, and thereby reduce the nonlinear error of the system. When using a PMF with an Extinction Ratio (ER) of 22 dB, the experimental results show that this method can reduce the polarization and increase the ER to 33.95 dB. After polarization compensation, the nonlinear error is reduced from 7.22 nm to 2.02 nm. The proportion of the nonlinear error reduction reaches to 71.99%, which greatly improves the accuracy of the system.

Qingda granule alleviates cerebral ischemia/reperfusion injury by inhibiting TLR4/NF-κB/NLRP3 signaling in microglia.

ETHNOPHARMACOLOGICAL RELEVANCE: Qingda granule (QDG) is effective for treating hypertension and neuronal damage after cerebral ischemia/reperfusion. However, the anti-neuroinflammatory effect of QDG on injury due to cerebral ischemia/reperfusion is unclear. AIM OF THE STUDY: The objective was to evaluate the effectiveness and action of QDG in treating neuroinflammation resulting from cerebral ischemia/reperfusion-induced injury. MATERIALS AND METHODS: Network pharmacology was used to predict targets and pathways of QDG. An in vivo rat model of middle cerebral artery occlusion/reperfusion (MCAO/R) as well as an in vitro model of LPS-stimulated BV-2 cells were established. Magnetic resonance imaging (MRI) was used to quantify the area of cerebral infarction, with morphological changes in the brain being assessed by histology. Immunohistochemistry (IHC) was used to assess levels of the microglial marker IBA-1 in brain tissue. Bioplex analysis was used to measure TNF-α, IL-1ß, IL-6, and MCP-1 in sera and in BV-2 cell culture supernatants. Simultaneously, mRNA levels of these factors were examined using RT-qPCR analysis. Proteins of the TLR4/NF-κB/NLRP3 axis were examined using IHC in vivo and Western blot in vitro, respectively. While NF-κB translocation was assessed using immunofluorescence. RESULTS: The core targets of QDG included TNF, NF-κB1, MAPK1, MAPK3, JUN, and TLR4. QDG suppressed inflammation via modulation of TLR4/NF-κB signaling. In addition, our in vivo experiments using MCAO/R rats demonstrated the therapeutic effect of QDG in reducing brain tissue infarction, improving neurological function, and ameliorating cerebral histopathological damage. Furthermore, QDG reduced the levels of TNF-α, IL-1ß, IL-6, and MCP-1 in both sera from MCAO/R rats and supernatants from LPS-induced BV-2 cells, along with a reduction in the expression of the microglia biomarker IBA-1, as well as that of TLR4, MyD88, p-IKK, p-IκBα, p-P65, and NLRP3 in MCAO/R rats. In LPS-treated BV-2 cells, QDG downregulated the expression of proinflammatory factors and TLR4/NF-κB/NLRP3 signaling-related proteins. Additionally, QDG reduced translocation of NF-κB to the nucleus in both brains of MCAO/R rats and LPS-induced BV-2 cells. Moreover, the combined treatment of the TLR4 inhibitor TAK242 and QDG significantly reduced the levels of p-P65, NLRP3, and IL-6. CONCLUSIONS: QDG significantly suppressed neuroinflammation by inhibiting the TLR4/NF-κB/NLRP3 axis in microglia. This suggests potential for QDG in treating ischemia stroke.

Liensinine improves AngII-induced vascular remodeling via MAPK/TGF-ß1/Smad2/3 signaling.

ETHNOPHARMACOLOGICAL RELEVANCE: Liensinine(Lien, C37H42N2O6) is an alkaloid compound from plumula nelumbinis that demonstrates an antihypertensive effect. The protective effects of Lien on target organs during hypertension are still unclear. AIM OF THE STUDY: This study aimed to understand the mechanism of Lien during the treatment of hypertension, with emphasis on vascular protection. MATERIALS AND METHODS: Lien was extracted and isolated from plumula nelumbinis for further study. In vivo model of Ang II-induced hypertension, non-invasive sphygmomanometer was used to detect the blood pressure in and out of the context of Lien intervention. Ultrasound was used to detect the abdominal aorta pulse wave and media thickness of hypertensive mice, and RNA sequencing was used to detect the differential genes and pathways of blood vessels. The intersection of Lien and MAPK protein molecules was detected by molecular interconnecting technique. The pathological conditions of abdominal aorta vessels of mice were observed by HE staining. The expression of PCNA, α-SMA, Collagen Type Ⅰ and Collagen Type Ⅲ proteins were detected by IHC. The collagen expression in the abdominal aorta was detected by Sirius red staining. The MAPK/TGF-ß1/Smad2/3 signaling and the protein expression of PCNA and α-SMA was detected by Western blot. In vitro, MAPK/TGF-ß1/Smad2/3 signaling and the protein expression of PCNA and α-SMA were detected by Western blot, and the expression of α-SMA was detected by immunofluorescence; ELISA was used to detect the effect of ERK/MAPK inhibitor PD98059 on Ang Ⅱ-induced TGF-ß1secrete; and the detection TGF-ß1and α-SMA protein expression by Western blot; Western blot was used to detect the effect of ERK/MAPK stimulant12-O-tetradecanoyl phorbol-13-acetate (TPA) on the protein expression of TGF-ß1 and α-SMA. RESULTS: Lien displayed an antihypertensive effect on Ang Ⅱ-induced hypertension, reducing the pulse wave conduction velocity of the abdominal aorta and the thickness of the abdominal aorta vessel wall, ultimately improving the pathological state of blood vessels. RNA sequencing further indicated that the differential pathways expressed in the abdominal aorta of hypertensive mice were enriched in proliferation-related markers compared with the Control group. The profile of differentially expressed pathways was ultimately reversed by Lien. Particularly, MAPK protein demonstrated good binding with the Lien molecule. In vivo, Lien inhibited Ang Ⅱ-induced abdominal aorta wall thickening, reduced collagen deposition in the ventral aortic vessel, and prevented the occurrence of vascular remodeling by inhibiting MAPK/TGF-ß1/Smad2/3 signaling activation. In addition, Lien inhibited the activation of Ang II-induced MAPK and TGF-ß1/Smad2/3 signaling, attenuating the expression of PCNA and inhibiting the reduction of α-SMA, collectively playing a role in the inhibition of Ang Ⅱ-induced hypertensive vascular remodeling. PD98059 alone could inhibit Ang Ⅱ-induced elevation of TGF-ß1 and the decrease of α-SMA expression. Further, PD98059 combined with Lien had no discrepancy with the inhibitors alone. Simultaneously TPA alone could significantly increase the expression of TGF-ß1 and decrease the expression of α-SMA. Further, Lien could inhibit the effect of TPA. CONCLUSION: This study helped clarify the protective mechanism of Lien during hypertension, elucidating its role as an inhibitor of vascular remodeling and providing an experimental basis for the research and development of novel antihypertensive therapies.

High-precision method for simultaneously measuring the six-degree-of-freedom relative position and pose deformation of satellites.

The high-precision measurement of the six degrees-of-freedom (6DoF) relative position and pose deformation of satellites on the ground in vacuum and high-/low-temperature environments plays a critical role in ensuring the on-orbit mapping accuracy of satellites. To meet the strict measurement requirements for a satellite of a high accuracy, high stability, and a miniaturized measurement system, this paper proposes a laser measurement method for simultaneously measuring 6DoF relative position and attitude. In particular, a miniaturized measurement system was developed and a measurement model was established. The problem of error crosstalk between the 6DoF relative position and pose measurements was solved by conducting a theoretical analysis and OpticStudio software simulation, and the measurement accuracy was improved. Laboratory experiments and field tests were then conducted. The experimental results revealed that the measurement accuracy of the developed system for the relative position and relative attitude reached 0.2 µm and 0.4", within the measurement ranges of 500 mm along the X axis, ±100 µm along Y and Z axes, and ±100", and the 24-h measurement stabilities were superior to 0.5 µm and 0.5", respectively, which meets the ground measurement requirements for the satellite. The developed system was successfully applied on site, and the 6Dof relative position and pose deformation of the satellite were obtained via a thermal load test. This novel measurement method and system provides an experimental means for satellite development, in addition to a method for the high-precision measurement of the relative 6DoF position and pose between two points.

Simultaneous measurement of 5DOF spindle error motions in CNC machine tools.

We present a method for the simultaneous measurement of 5 degree-of-freedom (DOF) spindle error motions in computer numerical control (CNC) machine tools and develop a measurement system. The measurement system uses polarization-maintaining fiber coupled with a dual-frequency laser as the light source. The axial error motion of the spindle is measured by heterodyne interferometry, and other 4DOF error motions are obtained by collimation measurement. Based on the measurement system, a comprehensive measurement model of spindle error motion was established. The influence of system error on the measurement accuracy of the spindle tilt error motion and radial error motion was analyzed. According to the measurement model, a corresponding data-processing method is proposed, which removes some systematic errors. A series of experiments was conducted to verify the feasibility and effectiveness of the proposed measurement system and the corresponding measurement model.

Qingda granule alleviate angiotensin â ±-induced hypertensive renal injury by suppressing oxidative stress and inflammation through NOX1 and NF-κB pathways.

Hypertension has become one of the important diseases harmful to human health. In China, Qingda granule (QDG) has been used to treat hypertension for decades. Previous studies by our team have shown that oxidative stress may be one of the pathways through which QDG inhibits hypertension-induced organs injury. However, the specific molecular mechanism of its anti-hypotension and renal oxidative stress response were unclearly. This study investigated QDG's potential protective mechanism against hypertension-induced renal injury. Mice were infused with Angiotensin Ⅱ (Ang Ⅱ, 500 ng/kg/min) or equivalent saline solution (Control) and administered oral QDG (1.145 g/kg/day) or saline for four weeks. QDG treatment mitigated the elevated blood pressure and reduced renal pathological changes induced by Ang Ⅱ. As per the RNA sequencing results, QDG affects oxidative stress signaling. In agreement with these findings, QDG significantly attenuated the Ang Ⅱ-induced increase in Nitrogen oxides 1 (NOX1) and reactive oxygen species and the decrease in superoxide dismutase in renal tissue. Additionally, QDG significantly inhibited Interleukin 6 (IL-6), Tumor necrosis factor α (TNF-α), and Interleukin 1ß (IL-1ß) expression in renal tissues and blocked the phosphorylation of P65 (NF-κB subunit) and IκB. These results were confirmed in vitro. Overall, QDG reduced Ang Ⅱ-induced elevated blood pressure and renal injury by inhibiting oxidative stress and inflammation caused by NOX1 and NF-κB pathways. The results of this study provide an experimental basis for the clinical application of QDG, and to open up a new direction for the clinical treatment of hypertension.

Simultaneous Measurement of 6DOF Motion Errors of Linear Guides of CNC Machine Tools Using Different Modes.

Based on the prior work on the six degrees of freedom (6DOF) motion errors measurement system for linear axes, and for the different types of machine tools and different installation methods, this study used a ray tracing idea to establish the measurement models for two different measurement modes: (1) the measurement head is fixed and the target mirror moves and (2) the target mirror is fixed and the measurement head moves. Several experiments were performed on the same linear guide using two different measurement modes. The comparative experiments show that the two measurement modes and their corresponding measurement models are correct and effective. In the actual measurement process, it is therefore possible to select the corresponding measurement model according to the measurement mode. Furthermore, the correct motion error evaluation results can be obtained.