Comparison of two surgical interventions for advanced stages pubis and pubic symphysis tuberculosis in adults: A retrospective study of 33 cases.

PURPOSE: To compare the clinical efficacy of two surgical interventions in treating advanced stages TB of the pubis and pubic symphysis. METHODS: Between June 2010 and January 2020, 33 cases of the advanced pubis and pubic symphysis TB were treated with a one-stage debridement procedure (debridement only group, n = 15) or a one-stage debridement with bone grafting and plate fixation procedure (debridement + plating group, n = 18). The visual analog scale (VAS) score, erythrocyte sedimentation rate (ESR), C-reactive protein (CRP), operation time, intraoperative blood loss, complications, time of bone graft fusion, and improvement in the mental component summary (MCS) and physical component summary (PCS) of Short Form-36 (SF-36) were compared and analyzed. RESULTS: All patients were followed for 24.9 (SD 1.6) months. All patients were completely cured of the pubis and pubic symphysis TB with no recurrence. There were no significant differences (P >0.05) between the two groups in terms of age, follow-up period and intraoperative blood loss. The post-operative VAS scores, ESR and CRP levels, PCS and MCS scores of two groups significantly improved compared to pre-therapy. The mean operation time in debridement + plating group was 140.9 (43.2) min, which was significantly longer than in debridement only group [94.9(21.8) min, P < 0.01]. The final follow-up (FFU) indices of the VAS score in debridement only group were higher than those in debridement + plating group [1.9 (0.8) vs 1.3 (0.5), P=0.012]. A satisfactory average bony fusion time of 12.2 (3.3) months was achieved in debridement + plating group . CONCLUSIONS: A one-stage debridement, bone grafting, and reconstruction plate fixation procedure achieved reconstruction of the integrity and stability of the pelvic ring, pain relief, and rapid cure of bone TB. This procedure is a safe and effective treatment option for advanced pubis and pubic symphysis TB.

Comparison of two surgical interventions for lumbar brucella spondylitis in adults: a retrospective analysis.

This retrospective study aimed to compare the clinical efficacy of the posterior procedure with the combined anterior and posterior procedure in the surgical management of lumbar Brucella spondylitis. From January 2015 to June 2020, a total of 62 patients presenting with lumbar Brucella spondylitis underwent either one-stage posterior pedicle fixation, debridement, and interbody fusion (Group A, n = 33) or anterior debridement, bone grafting, and posterior instrumentation (Group B, n = 29). All patients were followed up for an average of 25.4 ± 1.5 months and achieved complete resolution of lumbar Brucella spondylitis. No significant differences between the groups were observed in terms of age or pre-operative, three-month postoperative and final follow-up indices of the VAS, ESR, CRP, lordosis angle, ODI scores, fusion time, and time of serum agglutination test conversion to negative (P > 0.05). Each patient exhibited notable improvements in neurological function, as assessed by the JOA score rating system. Group A demonstrated significantly shorter operative duration, intraoperative blood loss, and hospital stay compared to Group B (P < 0.05). Superficial wound infection was observed in one case in Group A, whereas Group B experienced one case each of intraoperative peritoneal rupture, postoperative ileus, iliac vein injury, and superficial wound infection. This study supports the efficacy of both surgical interventions in the treatment of lumbar Brucella spondylitis, with satisfactory outcomes. However, the posterior approach demonstrated advantages, including reduced surgical time, diminished blood loss, shorter hospital stays, and fewer perioperative complications. Consequently, the one-stage posterior pedicle fixation, debridement, and interbody fusion represent a superior treatment option.

Three-dimensional simulation/printing-assisted surgery for symptomatic metastatic epidural spinal cord compression of posterior column: efficacy assessment based on 2-year follow-up.

Background: Surgical intervention is necessary for resolving the symptoms of the spinal cord and nerve compression caused by symptomatic metastatic epidural spinal cord compression. However, surgeons are constantly seeking ways to improve surgical efficiency and safety. This study aims to evaluate the efficacy of 3D simulation/printing-assisted surgery for symptomatic metastatic epidural spinal cord compression of the posterior column. Methods: We retrospectively analyzed the clinical data of patients who underwent surgical treatment for symptomatic metastatic epidural spinal cord compression of the posterior column in our hospital from January 2015 to January 2020. The simulated group underwent a 3D digital simulation of the lesion area using imaging data before surgery. Twelve patients in the simulated group also received 3D printing, while the direct surgery group did not receive any 3D simulation or printing. All patients were followed up for at least 2 years. We collected clinical data, including operation time, intraoperative blood loss, pedicle screw adjustment rate, intraoperative fluoroscopy times, the incidence of dural injury and cerebrospinal fluid leakage, VAS score, postoperative neurological function improvement, and tumor recurrence. Statistical analysis was performed using SPSS23.0, and P < 0.05 was considered statistically significant. Results: A total of 46 patients were included in this study, with 20 in the simulated group and 26 in the non-simulated group. The simulated group had better operation time, intraoperative blood loss, screw adjustment rate, fluoroscopy times, and incidence of dural injury/cerebrospinal fluid leakage compared to the non-simulated group. The VAS scores of the two groups improved significantly after the operation and at the last follow-up compared to before the operation. However, there was no statistically significant difference between the two groups. There was also no statistically significant difference in neurological function improvement between the two groups. In the simulated group, 25% of patients relapsed, while in the non-simulated group, 34.61% of patients relapsed. However, there was no statistical difference between the two groups. Conclusion: Preoperative 3D simulation/printing-assisted surgery is a practical and feasible approach for treating symptomatic metastatic epidural spinal cord compression of the posterior column.

Protective effects of polydatin against bone and joint disorders: the in vitro and in vivo evidence so far.

Polydatin is an active polyphenol displaying multifaceted benefits. Recently, growing studies have noticed its potential therapeutic effects on bone and joint disorders (BJDs). Therefore, this article reviews recent in vivo and in vitro progress on the protective role of polydatin against BJDs. An insight into the underlying mechanisms is also presented. It was found that polydatin could promote osteogenesis in vitro, and symptom improvements have been disclosed with animal models of osteoporosis, osteosarcoma, osteoarthritis and rheumatic arthritis. These beneficial effects obtained in laboratory could be mainly attributed to the bone metabolism-regulating, anti-inflammatory, antioxidative, apoptosis-regulating and autophagy-regulating functions of polydatin. However, studies on human subjects with BJDs that can lead to early identification of the clinical efficacy and adverse effects of polydatin have not been reported yet. Accordingly, this review serves as a starting point for pursuing clinical trials. Additionally, future emphasis should also be devoted to the low bioavailability and prompt metabolism nature of polydatin. In summary, well-designed clinical trials of polydatin in patients with BJD are in demand, and its pharmacokinetic nature must be taken into account.

Comparing Bone Graft Techniques for Interbody Fusion through a Posterior Approach for Treating Mid-Thoracic Spinal Tuberculosis: A Retrospective Analysis.

OBJECTIVE: Mid-thoracic spinal tuberculosis is prone to kyphotic deformities and neurologic impairment. Posterior approach can effectively restore the spinal stability by reconstructing the anterior and middle spinal columns. Titanium mesh cages (TMC), allogeneic bone (ALB), and autogenous bone (AUB) are three main bone graft struts. We aimed to compare the therapeutic efficacy of three bone graft struts, for anterior and middle column reconstruction through a posterior approach in cases of mid-thoracic spinal tuberculosis. METHODS: Hundred and thirty seven patients with thoracic spinal tuberculosis who had undergone a posterior approach from June 2010 to December 2018 were enrolled. Of them, 46 patients were treated using a titanium mesh cage (TMC group), 44 with allogenic bone grafts (ALB group), and 47 using autogenous bone grafts (AUB group). The following were analyzed to evaluate clinical efficacy: visual analogue scale (VAS) values, erythrocyte sedimentation rate (ESR), C-reactive protein (CRP) levels, kyphotic Cobb's angle, operation duration, intraoperative blood loss, improvement in American Spinal Injury Association (ASIA) grade and in the mental component summary (MCS) and physical component summary (PCS) of Short Form-36 (SF-36), duration of bone graft fusion. The data of the three groups were compared by way of variance analysis, followed by the LSD⁃t test to compare each group. A repeated measures ANOVA was used to analyze the dates of pre-, postoperative and final follow-up. RESULTS: The follow-up duration was at least 3 years. All patients achieved a complete cure for spinal TB. Neurological performance and quality of life were remarkably improved at the final follow-up. The intraoperative blood loss, operation time and VAS values 1 day postoperatively for TMC group and ALB group were significantly lower than those in AUB group (P < 0.05). The duration of bone graft fusion in ALB group (18.1 ± 3.7 months) was longer than that in TMC group and AUB group (9.5 ± 2.8 and 9.2 ± 1.9 months) (P < 0.05). No significant intergroup differences were observed in terms of age or preoperative, 3-months postoperative, and final follow-up indices of ESR and CRP among the three groups (P > 0.05). At the final follow-up, the correction loss was mild (2.1 ± 0.9, 2.2 ± 1.0, 2.1 ± 0.8) and Cobb's angles of the three groups were 20.1 ± 2.9, 20.5 ± 3.2, 20.9 ± 3.4, respectively, which were remarkably rectified in comparison with the preoperative measurements (P < 0.05). CONCLUSIONS: In terms of postoperative recovery and successful fusion rate of bone graft, it seems that posterior instrumentation, debridement, and interbody fusion with titanium mesh cages are more effective and appropriate surgical methods for mid-thoracic spinal tuberculosis.

Preparation and Biocompatibility of Core-Shell Microspheres for Sequential, Sustained Release of BMP-2 and VEGF.

Bone defect repair remains a challenge in orthopedics. This study describes the development and potential effectiveness of vascular endothelial growth factor (VEGF)/bone morphogenetic protein-2 (BMP-2) shell-core microspheres for promoting bone regeneration. Poly(L-lactic acid)/polylactic-co-glycolic acid (PLLA/PLGA) core-shell microspheres loaded with VEGF and BMP-2 were prepared by a coaxial electrospray technique, and their surface morphology, core-shell distribution, and particle size were examined. Different groups of microspheres were prepared with different placement of the growth factors, and the encapsulation efficiency and in vitro release curves were measured. Additionally, the effects of the different groups of microspheres on the proliferation and differentiation of osteoblasts and vascular endothelial cells were investigated. The prepared microspheres had a core-shell structure with good homogeneity and dispersion, a clear boundary, and a smooth surface. On scanning electron microscopy, the mean diameter of the microspheres was similar for all six preparations (P > 0.05). During in vitro release, growth factor was initially released via a brief burst release from the outer shell of the microsphere followed by a slower sustained release. The release of growth factors from the inner core remained relatively slow and sustained. Sequential release of different growth factors was achieved through the inconsistent release rates from the microsphere shell and inner core. All groups of microspheres showed no cytotoxicity, good biocompatibility, and the ability to promote osteoblast proliferation. The microspheres loaded with BMP-2 also promoted osteoblast differentiation, and VEGF-loaded microspheres promoted the proliferation and differentiation of vascular endothelial cells. The BMP-2 (core)/VEGF (shell) microsphere group best promoted osteoblast differentiation. The microspheres prepared in this study exhibited slow sequential release of BMP-2 and VEGF and showed good biocompatibility along with the ability to promote osteoblast differentiation and vascular endothelial cell proliferation.

Construction and osteogenic effects of 3D-printed porous titanium alloy loaded with VEGF/BMP-2 shell-core microspheres in a sustained-release system.

The repair and reconstruction of bone defects remain a challenge in orthopedics. The present study offers a solution to this problem by developing a vascular endothelial growth factor (VEGF)/bone morphogenetic protein 2 (BMP-2) shell-core microspheres loaded on 3D-printed porous titanium alloy via gelatin coating to prepare a titanium-alloy microsphere scaffold release system. The composite scaffold was characterized via scanning electron microscope (SEM) and energy disperse spectroscopy (EDS), and the effect of the composite scaffold on the adhesion, proliferation, and differentiation of osteoblasts were determined in vitro. Furthermore, a rabbit femoral defect model was established to verify the effect of the composite scaffold on osteogenesis and bone formation in vivo. The results demonstrated that the composite scaffold could release VEGF and BMP-2 sequentially. Meanwhile, the composite scaffold significantly promoted osteoblast adhesion, proliferation, and differentiation (p < 0.05) compared to pure titanium alloy scaffolds in vitro. Furthermore, the composite scaffold can exhibit significant osteogenic differentiation (p < 0.05) than gelatin-coated titanium alloy scaffolds. The in vivo X-rays demonstrated that the implanted scaffolds were in a good position, without inflammation and infection. Micro-CT and quantitative results of new bone growth illustrated that the amount of new bone in the composite scaffold is significantly higher than that of the gelatin-coated and pure titanium alloy scaffolds (p < 0.05). Similarly, the fluorescence labeling and V-G staining of hard tissue sections indicated that the bone integration capacity of the composite scaffold was significantly higher than the other two groups (p < 0.05). This research suggests that VEGF/BMP-2 shell-core microspheres loaded on 3D-printed titanium alloy porous scaffold through gelatin hydrogel coating achieved the sequential release of VEGF and BMP-2. Most importantly, the in vitro and in vivo study findings have proven that the system could effectively promote osteogenic differentiation and osseointegration.

In Vitro and In Vivo Analysis of the Effects of 3D-Printed Porous Titanium Alloy Scaffold Structure on Osteogenic Activity.

The effect of titanium scaffold geometry on the bone regeneration ability of the scaffold remains unclear. Here, selective laser melting as a 3D printing technology was used to create porous titanium alloy scaffolds with two unit structures: a hollow hexagonal prism (group A) and a hollow triangular prism (group B). The structures and morphologies of the scaffolds were characterized before mechanical properties were simulated. Cell adhesion behaviors, osteoblast activity and proliferation, and alkaline phosphatase (ALP) activity were evaluated, in addition to in vivo testing in an animal model. The results showed that the two scaffolds made of Ti6Al4V had compression moduli similar to that of human cortical bone (116.91 ± 0.01 and 174.29 ± 2.21 MPa vs. 89-164 MPa). The two scaffolds were nontoxic to cells and had good biocompatibility, while group A scaffolds facilitated cell adhesion. The number of cells increased gradually in culture. The ALP activity of cells on group A scaffolds demonstrated higher osteogenic ability than that of group B scaffolds. The in vivo tests showed that all scaffolds retained their shape well after implantation, and no obvious inflammatory reaction or infection in surrounding tissues was found. Based on fluorescence staining, mature new bone formation was found at week 12. Group A scaffolds showed better bone integration ability compared with group B scaffolds. The percentage of new bone area in group A (7.5%) was higher than that in group B (6.5%). This research suggests that the hollow hexagonal prism structure of porous scaffolds can promote osteogenic differentiation and osseointegration better than the triangular prism structure.

A comparison of three bone graft struts for interbody fusion using a posterior approach for lower lumbar spinal tuberculosis in adults: a midterm follow-up study.

BACKGROUND: This retrospective observational study was conducted to compare midterm outcomes of three bone graft struts for interbody fusion using a posterior approach in adults with lower lumbar spinal tuberculosis. METHODS: A total of 126 lower lumbar spinal tuberculosis patients were treated by one-stage posterior debridement, interbody fusion, and instrumentation. Forty-one patients (group A) were treated with autogenous bone graft for interbody fusion, 45 patients (group B) were treated with allogeneic bone grafting, and the remaining 40 (group C) patients were treated with titanium mesh cage. In addition, clinical and radiographic data were gathered and analyzed. RESULTS: At the final follow-up, all patients were completely cured. The operation period and intraoperative blood loss for groups B and C were significantly less than in group A (P = 0.000). Post-operation, neurological performance and quality of life were remarkably improved at the final follow-up. The preoperative lordosis angles of three groups were significantly improved, as evidenced by the values immediately after the operation or those at the final follow-up. The correction loss of the group C was lower than those of groups A and B (P = 0.000). All the patients obtained bone graft fusion, the fusion period of group B was longer than that of the other two groups (P = 0.000). No significant differences among the three groups in adjacent segment degeneration rates were found at the last visit (P = 0.922). CONCLUSIONS: This midterm follow-up study established that one-stage posterior debridement, interbody fusion, and instrumentation, combined with medical therapy, can effectively treat lower lumbar spinal tuberculosis. In addition, the intervertebral titanium mesh cage bone graft can provide better outcomes with regard to maintaining lordosis and preventing collapse.

Extracellular vesicles from human umbilical cord mesenchymal stem cells reduce lipopolysaccharide-induced spinal cord injury neuronal apoptosis by mediating miR-29b-3p/PTEN.

OBJECTIVE: This study investigated the molecular mechanism of whether hUC-MSCs-EVs repressed PTEN expression and activated the PI3K/AKT pathway through miR-29b-3p, thus inhibiting LPS-induced neuronal injury. METHODS: hUC-MSCs were cultured and then identified. Cell morphology was observed. Alizarin red, oil red O, and alcian blue staining were used for inducing osteogenesis, adipogenesis, and chondrogenesis. EVs were extracted from hUC-MSCs and identified by transmission electron microscope observation and Western blot. SCI neuron model was established by 24h lipopolysaccharide (LPS) induction. After the cells were cultured with EVs without any treatment, uptake of EVs by SCI neurons, miR-29b-3p expression, cell viability, apoptosis, caspase-3, cleaved caspase-3, caspase 9, Bcl-2, PTEN, PI3K, AKT, and p-Akt protein levels, caspase 3 and caspase 9 activities, and inflammatory factors IL-6 and IL-1ß levels were detected by immunofluorescence labeling, RT-qPCR, MTT, flow cytometry, Western blot, caspase 3 and caspase 9 activity detection kits, and ELISA. The binding sites between PTEN and miR-29b-3p were predicted by the database and verified by dual-luciferase assay. RESULTS: LPS-induced SCI cell model was successfully established, and hUC-MSCs-EVs inhibited LPS-induced apoptosis of injured spinal cord neurons. EVs transferred miR-29b-3p into LPS-induced injured neurons. miR-29b-3p silencing reversed EV effects on reducing LPS-induced neuronal apoptosis. miR-29b-3p reduced LPS-induced neuronal apoptosis by targeting PTEN. After EVs-miR-inhi and si-PTEN treatment, inhibition of the PI3K/AKT pathway reversed hUC-MSCs-EVs effects on reducing LPS-induced neuronal apoptosis. CONCLUSION: hUC-MSCs-EVs activated the PI3K/AKT pathway by carrying miR-29b-3p into SCI neurons and silencing PTEN, thus reducing neuronal apoptosis.

Endoscopy-assisted anterior cervical debridement combined with posterior fixation and fusion for the treatment of upper cervical spine tuberculosis: a retrospective feasibility study.

BACKGROUND: This retrospective study aimed to determine the feasibility and efficacy of endoscopy-assisted anterior cervical debridement combined with posterior fixation and fusion in patients with upper cervical spine tuberculosis. METHODS: Between June 2008 and January 2016, 17 patients (10 men and 7 women) with upper cervical spine tuberculosis underwent endoscopy-assisted anterior cervical debridement combined with posterior fixation and fusion. Anti-tuberculosis treatment was administered for 2-4 weeks preoperatively and 12-18 months postoperatively. The clinical and radiographic data of the patients were analyzed. RESULTS: The operation was successfully completed in all patients. Neck pain and stiffness were relieved after the surgery in all patients. The mean operation time was 210.0 ± 21.2 min, and the mean intraoperative blood loss was 364.7 ± 49.6 mL. The mean follow-up duration was 68.1 ± 6.7 months. The erythrocyte sedimentation rate returned to normal by 3 months postoperatively. Visual analog scale scores for neck pain were significantly lower postoperatively than preoperatively. All patients had significant postoperative neurological improvement. Patient-reported outcomes, as measured using the Kirkaldy-Willis criteria, were as follows: excellent, 12 patients; good, 4 patients; fair, 1 patient; and poor, 0 patients. Bone fusion was achieved at 10.9 ± 1.9 months after the surgery; no cases of instrument loosening or fracture occurred. CONCLUSION: Endoscopy-assisted anterior cervical debridement combined with posterior fixation and fusion is a feasible and effective surgical method for the treatment of upper cervical spine tuberculosis. It can be used to restore upper cervical spine stability and facilitate spinal healing.