3D Printing of TPU-Liquid Metal Composite Inks for the Preparation of Flexible Sensing Electronics.

Direct 3D printing of liquid metal is difficult to form and easy to destroy. In this paper, we developed a 3D printed composite material consisting of a thermoplastic polyurethane (TPU) matrix and liquid metal (LM) dispersed droplets, and introduced the method for realizing 3D printed devices with this composite material: First, the LM is added to 10~50wt %TPU at 190~200 °C through ultrasonic blending to prepare blended ink. After solid cooling, the LM-TPU composite fiber with a diameter of 600 µm was prepared by Wellzoom desktop extruder at 190 °C at an extrusion speed of 400 mm/min. It has excellent elasticity, with a tensile limit of 0.637 N/m2, and the TPU could evenly wrap LM droplets. Finally, the LM-TPU fiber is 3D printed at 240 °C by using a 3D printer, and 2D/3D flexible electronic devices with heating and conductive functions could be prepared. The microcircuit has good electrical conductivity; after adding voltage, the circuit has heat release; it could be used as heating equipment to keep warm and used in various flexible wearable electronic products.

Nitration of Pyrrolo[2,1-a]isoquinolines.

We have successfully modified a series of pyrrolo[2,1-a]isoquinolines via direct nitration under mild reaction conditions. Easily accessible nitrates including CAN, Cu(NO3)2·H2O, and Fe(NO3)3·9H2O all can serve as effective nitrating reagents for functionalizing pyrrolo[2,1-a]isoquinolines. Various nitro-bearing pyrrolo[2,1-a]isoquinolines have been efficiently prepared in acceptable to good yields.

Topical Delivery of ROS-Responsive Methotrexate Prodrug Nanoassemblies by a Dissolvable Microneedle Patch for Psoriasis Therapy.

Purpose: Oxidative stress, nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB) and adenosine signaling are factors associated with psoriatic inflammation. Topical delivery of methotrexate (MTX) has become an option to overcome the side effects caused by systemic therapy in psoriasis, leading to the suppression of NF-κB activation through boosting adenosine release. However, thickened psoriatic skin is the primary restriction against local drug delivery. Methods: In this study, a ROS responsive MTX prodrug (MTX-TK-HA) was synthesized with the feature of CD44 mediated active targeting to hyperproliferative keratinocytes. MTX prodrug and PLA-mPEG were formulated by nano-precipitation method to develop the MTX-TK-HA/PLA-mPEG nanoassemblies. To achieve painless transdermal delivery, a dissolving microneedle was applied for direct loading of these nanoassemblies by micromolding technique. The particle size, zeta potential, ROS-responsiveness, permeability, and mechanical strength of nanoassemblies and microneedle arrays were determined, respectively. Then, MTT assay, immunoblot analysis, ELISA assay, flow cytometry, and histological staining were utilized to thoroughly evaluate the efficacy of nanoassemblies-loaded microneedles in an imiquimod-induced psoriatic mouse model. Results: Nanoassemblies-loaded microneedle arrays were capable of significantly penetrating imiquimod-induced psoriatic epidermis in mice. The efficient topical delivery of these nanoassemblies was achieved by potent mechanical strength and hyaluronic acid as the dissolvable matrix for microneedle arrays. CD44-mediated endocytosis enabled the intracellular uptake of nanoassemblies in keratinocytes, and methotrexate was released from MTX-TK-HA with ROS stimuli, followed by suppressing the proliferation of epidermal cells via NF-κB pathway blockade. Conclusion: In a psoriatic mouse model, nanoassemblies loaded microneedle arrays relieve inflammatory skin disorders via regulation of adenosine and NF-κB signaling. Our study offered a rational design for the transdermal delivery of hydrophobic agents and defined an effective therapeutic option for psoriasis treatment.

Recent progress in the oxidative bromination of arenes and heteroarenes.

Oxidative bromination has been serving as a powerful tool for the synthesis of bromo-containing molecules, as this bromination strategy features environmental friendliness, high flexibility in reaction system design and wide abundance of bromide sources and oxidants. The past decade has witnessed a large number of efficient oxidative bromination reaction systems and novel brominated aromatics. This review summarizes recent developments in the field of oxidative preparation of bromoarenes and bromoheteroarenes covering from 2012 to 2022.

Preparation of Activated Carbon-Based Solid Sulfonic Acid and Its Catalytic Performance in Biodiesel Preparation.

With activated carbon as raw material, AC-Ph-SO3H was prepared after oxidation with nitric acid, modification with halogenated benzene and sulfonation with concentrated sulfuric acid. After modified by 10% bromobenzene with toluene as a solvent for 5 h, followed sulfonation with concentrated sulfuric acid at 150°C, the -SO3H content of prepared AC-Ph-SO3H was 0.64 mmol/g. Acid content test, infrared spectroscopy and Raman spectroscopy detection proved that the surface of AC-Ph-SO3H was successfully grafted with -SO3H group. When used as a catalyst for the methylation of palmitate acid, the catalytic performance of AC-Ph-SO3H was explored. When the reaction time was 6 h, the amount of catalyst acid accounted for 2.5 wt% of palmitic acid, and the molar ratio of methanol/palmitic acid was 40, the esterification rate of palmitic acid was 95.2% and the yield of methyl palmitate was 94.2%, which was much better than those of its precursors AC, AC-O, and AC-Ph (both about 4.5%). AC-Ph-SO3H exhibited certain stability in the esterification reaction system and the conversion rate of palmitic acid was still above 80% after three reuses.

Selective Catalytic Isomerization of ß-Pinene Oxide to Perillyl Alcohol Enhanced by Protic Tetraimidazolium Nitrate.

A series of tetraimidazolium salts with different anions was prepared and applied in the isomerization of ß-pinene oxide. After examining the activity of different catalysts, a remarkable enhancement of the selectivity of perillyl alcohol (47 %) was obtained over [PEimi][HNO3 ]4 under mild reaction conditions and using DMSO as the solvent. Furthermore, noncovalent interactions between solvent molecules and the catalyst were found by FT-IR spectroscopy and confirmed by computational chemistry. The homogeneous catalyst showed excellent stability and was reused up to six times without significant loss.

Highly efficient and tunable visible-light-catalytic synthesis of 2,5-diformylfuran using HBr and molecular oxygen.

This paper discloses that inexpensive hydrobromic acid (HBr) is active and highly selective to the photo-oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-diformylfuran (DFF) with dioxygen (O2) or even with water under visible light illumination, which can achieve the highest 89.1% DFF yield in DMSO at 80 °C under pure O2 atmosphere. More importantly, under bifunctional acid-photooxidation catalysis of HBr, fructose can be directly converted to DFF and its two-step cascade conversion in DMSO provides a far higher DFF yield (80.2%) than the one-step cascade conversion in MeCN (42.1%). The results of HMF photooxidation catalyzed by hydrohalic acids, free radical quenching tests and EPR spectrum support that the Br atom and superoxide (O2 -˙) anion radicals generated by HBr photolysis in O2 are active species for the oxidation of HMF to DFF and their activities are adjusted by the reaction medium. This photo-synthetic protocol is very simple and practical, especially with low operating costs, showing a good industrial application prospect.

Visible-Light-Triggered Quantitative Oxidation of 9,10-Dihydroanthracene to Anthraquinone by O2 under Mild Conditions.

The development of mild and efficient processes for the selective oxygenation of organic compounds by molecular oxygen (O2 ) is key for the synthesis of oxygenates. This paper discloses an atom-efficient synthesis protocol for the photo-oxygenation of 9,10-dihydroanthracene (DHA) by O2 to anthraquinone (AQ), which could achieve quantitative AQ yield (100 %) without any extra catalysts or additives under ambient temperature and pressure. A yield of 86.4 % AQ was obtained even in an air atmosphere. Furthermore, this protocol showed good compatibility for the photo-oxidation of several other compounds with similar structures to DHA. From a series of control experiments, free-radical quenching, and electron paramagnetic resonance spin-trapping results, the photo-oxygenation of DHA was probably initiated by its photoexcited state DHA*, and the latter could activate O2 to a superoxide anion radical (O2 .- ) through the transfer of its electron. Subsequently, this photo-oxidation was gradually dominated by the oxygenated product AQ as an active photocatalyst obtained from the oxidation of DHA by O2 .- , and was accelerated with the rapid accumulation of AQ. The present photo-oxidation protocol is a good example of selective oxygenation based on the photoexcited substrate self-activated O2 , which complies well with green chemistry ideals.

Titanate nanotubes-bonded organosulfonic acid as solid acid catalyst for synthesis of butyl levulinate.

In this study, titanate nanotubes-bonded organosulfonic acid (TNTs-SO3H) was prepared and employed as an efficient heterogeneous catalyst for esterification of levulinic acid with n-butanol. Two reaction products pseudo n-butyl levulinate (pseudo-BL) and n-butyl levulinate (BL) were detected by GC-MS. The catalyst showed 86.8% conversion of levulinic acid with 99.7% selectivity towards n-butyl levulinate. TNTs-SO3H exhibited strong acidic sites and high stability even after seven cycles of usage and would be well expected to be a potential candidate for alkyl levulinate production.