Fundamentals of Unanticipated Efficiency of Gd2O3-based Catalysts in Oxidative Coupling of Methane.

Improving the selectivity in the oxidative coupling of methane to ethane/ethylene poses a significant challenge for commercialization. The required improvements are hampered by the uncertainties associated with the reaction mechanism due to its complexity. Herein, we report about 90 % selectivity to the target products at 11 % methane conversion over Gd2O3-based catalysts at 700 °C using N2O as the oxidant. Sophisticated kinetic studies have suggested the nature of adsorbed oxygen species and their binding strength as key parameters for undesired methane oxidation to carbon oxides. These descriptors can be controlled by a metal oxide promoter for Gd2O3.

Exquisitely Constructing a Robust MOF with Dual Pore Sizes for Efficient CO2 Capture.

Developing metal-organic framework (MOF) adsorbents with excellent performance and robust stability is of critical importance to reduce CO2 emissions yet challenging. Herein, a robust ultra-microporous MOF, Cu(bpfb)(bdc), with mixed ligands of N, N'-(1,4-phenylene)diisonicotinamide (bpfb), and 1,4-dicarboxybenzene (bdc) was delicately constructed. Structurally, this material possesses double-interpenetrated frameworks formed by two staggered, independent frameworks, resulting in two types of narrow ultra-micropores of 3.4 × 5.0 and 4.2 × 12.8 Å2, respectively. The above structural properties make its highly selective separation at 273~298 K with a CO2 capacity of 71.0~86.2 mg/g. Its adsorption heat over CO2 and IAST selectivity were calculated to be 27 kJ/mol and 52.2, respectively. Remarkably, cyclic breakthrough experiments corroborate its impressive performance in CO2/N2 separation in not only dry but also 75% RH humid conditions. Molecular simulation reveals that C-H···OCO2 in the pores plays a pivotal role in the high selectivity of CO2 adsorption. These results point out the huge potential application of this material for CO2/N2 separation.

In situ formation of ZnOx species for efficient propane dehydrogenation.

Propane dehydrogenation (PDH) to propene is an important alternative to oil-based cracking processes, to produce this industrially important platform chemical1,2. The commercial PDH technologies utilizing Cr-containing (refs. 3,4) or Pt-containing (refs. 5-8) catalysts suffer from the toxicity of Cr(VI) compounds or the need to use ecologically harmful chlorine for catalyst regeneration9. Here, we introduce a method for preparation of environmentally compatible supported catalysts based on commercial ZnO. This metal oxide and a support (zeolite or common metal oxide) are used as a physical mixture or in the form of two layers with ZnO as the upstream layer. Supported ZnOx species are in situ formed through a reaction of support OH groups with Zn atoms generated from ZnO upon reductive treatment above 550 °C. Using different complementary characterization methods, we identify the decisive role of defective OH groups for the formation of active ZnOx species. For benchmarking purposes, the developed ZnO-silicalite-1 and an analogue of commercial K-CrOx/Al2O3 were tested in the same setup under industrially relevant conditions at close propane conversion over about 400 h on propane stream. The developed catalyst reveals about three times higher propene productivity at similar propene selectivity.

Synergistic construction of bifunctional and stable Pt/HZSM-5-based catalysts for efficient catalytic cracking of n-butane.

Efficient conversion of light alkanes is of essential significance for enhancing the utilization efficiency of resources and exploring the activation and evolution regulation of C-C and C-H bonds in stable molecules. The processes are often executed with catalysts under harsh conditions. The olefin yield and metal stability have been the long-standing concerns. Herein, we report a facile strategy of constructing a bifunctional Pt/HZSM-5-based catalyst by two-step atomic layer deposition (ALD) to achieve a high light olefin formation rate of 0.48 mmol gcat-1·min-1 in the catalytic cracking of n-butane at 600 °C, which is ∼2.2 times higher than that of the conventional Pt/HZSM-5 catalyst (0.22 mmol gcat-1·min-1). Moreover, the bifunctional Pt/HZSM-5-based catalyst exhibited outstanding recyclability and excellent metal stability against sintering in comparison with conventional Pt/HZSM-5. Detailed microscopic and spectroscopic characterization studies demonstrate that the metal oxide (TiO2 or Al2O3) coating not only prevents the metal from high-temperature sintering, but also regulates the proportion of coordinately unsaturated platinum surface atoms. Theoretical calculations further confirm the preference of nucleation of TiO2 or Al2O3 on coordinately unsaturated platinum sites, which in turn modulates the bifunctional dehydrogenation-cracking pathway to improve the olefin formation rate.

Current status and perspectives in oxidative, non-oxidative and CO2-mediated dehydrogenation of propane and isobutane over metal oxide catalysts.

Conversion of propane or butanes from natural/shale gas into propene or butenes, which are indispensable for the synthesis of commodity chemicals, is an important environmentally friendly alternative to oil-based cracking processes. Herein, we critically analyse recent developments in the non-oxidative, oxidative, and CO2-mediated dehydrogenation of propane and isobutane to the corresponding olefins over metal oxide catalysts. Particular attention is paid to (i) comparing the developed catalysts in terms of their application potential, (ii) structure-activity-selectivity relationships for tailored catalyst design, and (iii) reaction-engineering aspects for improving product selectivity and overall process efficiency. On this basis, possible directions for further research aimed at the development of inexpensive and environmentally friendly catalysts with industrially relevant performance were identified. In addition, we provide general information regarding catalyst preparation and characterization as well as some recommendations for carrying out non-oxidative and CO2-mediated dehydrogenation reactions to ensure unambiguous comparison of catalysts developed in different studies.

The Influence of Pore Structure and Acidity on the Hydrodesulfurization of Dibenzothiophene over NiMo-Supported Catalysts.

A series of mesoporous materials of SBA-16 were in situ incorporated into ZSM-5 crystallites via a two-step self-assemble method, and hydrodesulfurization (HDS) catalysts were prepared on the corresponding ZSM-5/SBA-16 (ZS) composites. The characterization results indicated that ZSM-5 nanoseeds were fabricated into the silica framework of the ZS composites, and the three-dimensional Im3m cubic structure of SBA-16 was retained simultaneously. In addition, the ZS series materials possessed open pores and large surfaces, which would facilitate the diffusion of reactants in the mesoporous channels. Moreover, the introduction of ZSM-5 seeds into composites could enhance the acidities of supports. As a result, the NiMo/ZS series catalysts exhibited high activities for DBT HDS processes. The NiMo/ZS-160 catalyst exhibited the highest catalytic efficiency (96.5%), which was apparently attributed to the synergistic contributions of the physicochemical properties of ZS supports and the dispersion states of active metals. Correspondingly, DBT HDS reactions over the NiMo/ZS series catalysts mainly proceeded via a hydrogenation desulfurization route that benefitted from the enhanced acidities especially the total Brønsted acid.

The impact of laryngopharyngeal reflux disease on 95 hospitalized patients with COVID-19 in Wuhan, China: A retrospective study.

Studies have demonstrated that comorbidities, especially cardiovascular and endocrine diseases, correlated with poorer clinical outcomes. However, the impact of digestive system diseases has not been issued. The aim of this study is to determine the impact of laryngopharyngeal reflux disease (LPRD) on hospitalized patients with coronavirus disease 2019 (COVID-19). We extracted clinical data regarding 95 patients in Wuhan Jinyintan Hospital, Wuhan, China, between 26 January and 21 February 2020. The Reflux Symptom Index (RSI) was used to assess the presence and severity of LPRD. An RSI greater than 13 is considered to be abnormal. A total of 95 patients with COVID-19 were enrolled, with 61.1% (58/95), 32.6% (31/95), and 6.3% (6/95) being moderately ill, severely ill, and critically ill, respectively. In this study, 38.9% (37/95) of the patient had an RSI score over 13, which was indicative of LPRD. In univariable analysis, the age and RSI scores of severely or critically ill patients were statistically significantly higher than patients with moderate disease (P = .026 and P = .005, respectively). After controlling for age difference in a multivariable model, the RSI greater than 13, compared to RSI equal to 0, was associated with significantly higher risk of severe infection (P < .001; odds ratio [OR] = 11.411; 95% confidence interval [CI], 2.95-42.09) and critical infection (P = .028; OR= 19.61; 95% CI, 1.38-277.99). Among hospitalized patients with COVID-19, RSI scores greater than 13, indicative of LPRD, correlated with poorer clinical outcomes. The prevalence of LPRD may be higher than the general population, which indicated that COVID-19 can impair the upper esophageal sphincter and aggravate reflux.

ZnO Nanoparticles Encapsulated in Nitrogen-Doped Carbon Material and Silicalite-1 Composites for Efficient Propane Dehydrogenation.

Non-oxidative propane dehydrogenation (PDH) is an attractive reaction from both an industrial and a scientific viewpoint because it allows direct large-scale production of propene and fundamental analysis of C-H activation respectively. The main challenges are related to achieving high activity, selectivity, and on-stream stability of environment-friendly and cost-efficient catalysts without non-noble metals. Here, we describe an approach for the preparation of supported ultrasmall ZnO nanoparticles (2-4 nm, ZnO NPs) for high-temperature applications. The approach consists of encapsulation of NPs into a nitrogen-doped carbon (NC) layer in situ grown from zeolitic imidazolate framework-8 on a Silicalite-1 support. The NC layer was established to control the size of ZnO NPs and to hinder their loss to a large extent at high temperatures. The designed catalysts exhibited high activity, selectivity, and on-stream stability in PDH. Propene selectivity of about 90% at 44.4% propane conversion was achieved at 600°C after nearly 6 h on stream.

Novel metal doped carbon quantum dots/CdS composites for efficient photocatalytic hydrogen evolution.

Carbon quantum dots (CDs) are rising stars for photocatalytic applications due to their low toxicity and excellent electron transfer characteristics. Doping with heteroatoms is expected to adjust the band levels and electron transfer properties of CDs, and understanding the effect of doping on CDs can aid the rational preparation of highly efficient CD-based photocatalysts. Herein, we prepared a series of metal atom (Zn, Co, Bi, Cd, or Ti) doped CDs by pyrolysis and explored the photocatalytic application of these metal doped CDs for the first time. The metal doped CDs were combined with CdS nanowires as a co-catalyst for photocatalytic hydrogen production. The Bi, Cd and Ti doped CDs/CdS composites show much better hydrogen production performance than the undoped CDs/CdS composite. Among these composites, Bi-CDs/CdS presents the optimal interfacial charge separation and the best hydrogen production performance. The hydrogen evolution rate of Bi-CDs/CdS is 4.2 times and almost one time higher than that of pure CdS and undoped CDs/CdS, respectively. Bi doping can make the CDs metallic and promote the charge transfer of CDs. Such a great enhancement originates from the outstanding electron transfer properties of Bi-doped CDs, as well as the effective charge separation between Bi-doped CDs and CdS. Bi doping was demonstrated to be an effective strategy for optimizing the photocatalytic activity of CD based composites.

Control of coordinatively unsaturated Zr sites in ZrO2 for efficient C-H bond activation.

Due to the complexity of heterogeneous catalysts, identification of active sites and the ways for their experimental design are not inherently straightforward but important for tailored catalyst preparation. The present study reveals the active sites for efficient C-H bond activation in C1-C4 alkanes over ZrO2 free of any metals or metal oxides usually catalysing this reaction. Quantum chemical calculations suggest that two Zr cations located at an oxygen vacancy are responsible for the homolytic C-H bond dissociation. This pathway differs from that reported for other metal oxides used for alkane activation, where metal cation and neighbouring lattice oxygen form the active site. The concentration of anion vacancies in ZrO2 can be controlled through adjusting the crystallite size. Accordingly designed ZrO2 shows industrially relevant activity and durability in non-oxidative propane dehydrogenation and performs superior to state-of-the-art catalysts possessing Pt, CrOx, GaOx or VOx species.

The selective catalytic reduction of NO over Ce0.3TiOx-supported metal oxide catalysts.

A Ce0.3TiOx oxide carrier was synthesized via a sol-gel process, and Ce0.3TiOx supported metal (M=Cd, Mn, Fe, W, Mo) oxide catalysts were prepared by the method of incipient-wetness impregnation. The catalysts were characterized by means of X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS), and Temperature-programmed reduction with H2 (H2-TPR). The catalytic activities for de-NOx were evaluated by the NH3-SCR reaction. Among all the catalysts tested, the 2wt.% Cd/Ce0.3TiOx catalyst exhibited the best NH3-SCR performance, with a wide temperature window of 250-450°C for NO conversion above 90%. Moreover, the catalyst showed N2 selectivity greater than 99% from 200 to 450°C.

Promoted photoelectrocatalytic hydrogen evolution of a type II structure via an Al2O3 recombination barrier layer deposited using atomic layer deposition.

Constructing a semiconductor type II structure is an effective way to enhance the photogenerated charge separation efficiency. The separation and migration of interfacial photogenerated carriers is a key factor, which influences the photocatalytic activity. In this study, a conformal Al2O3 recombination barrier layer was introduced at the interface between TiO2 nanowires and CdSe nanoparticles, and the application of this composite in photoelectrocatalytic (PEC) hydrogen production was explored. Under visible-light irradiation, the photocurrent response and PEC hydrogen evolution performance increased step-by-step from TiO2 to the Al2O3/TiO2 and CdSe/Al2O3/TiO2 nanowire arrays. Moreover, the H2 evolution rate of CdSe/Al2O3/TiO2 was much higher than that of a different configuration, Al2O3/CdSe/TiO2. The enhanced PEC hydrogen evolution performance was attributed to the prevention of the interfacial charge recombination caused by the Al2O3 recombination barrier layer. Our results may shed new light on developing novel and highly efficient photocatalysts using rational interface design.

Simultaneous realization of high catalytic activity and stability for catalytic cracking of n-heptane on highly exposed (010) crystal planes of nanosheet ZSM-5 zeolite.

Nanosheet ZSM-5 zeolite with highly exposed (010) crystal planes demonstrates high reactivity and good anti-coking stability for the catalytic cracking of n-heptane, which is attributed to the synergy of high external surface area and acid sites, fully accessible channel intersection acid sites, and hierarchical porosity caused by the unique morphology.

Chronic cough: clinical characteristics and etiologies of 510 cases.

BACKGROUND/AIM: To investigate the clinical features and underlying etiologies of chronic cough (CC). MATERIALS AND METHODS: Five hundred and ten CC patients were enrolled. The phases, characteristics and associated clinical manifestations of CC among the gastroesophageal reflux cough (GERC), cough-variant asthma (CVA), and upper airway cough syndrome (UACS) groups were compared, and the diagnostic values of each group were evaluated by multiple regression analysis. RESULTS: In the 510 patients, 404 had CC with single etiology-GERC (n = 175), CVA (n = 134), and UACS (n = 95). The characteristic features of GERC included gastric acid backflow symptoms such as sour-tasting regurgitation, heartburn, endoscopic esophagitis, poststimulation cough, frequent throat clearing, daytime mono-cough, and feelings of heaviness and pain in the chest. Patients with CVA typically exhibited sensitivity to smog and other irritants; the cough occurred mostly at night, and was associated with positive bronchodilator and provocation test results. The typical features of UACS included a history and/or symptoms of rhinitis, retropharyngeal postnasal drip, and wet cough occurring mostly during the daytime. The diagnostic specificities of above factors were >70%. CONCLUSION: The most common causes of CC include GERC, CVA, and UACS, and their diagnosis is based on the characteristics of the underlying disease.

NH3-SCR denitration catalyst performance over vanadium-titanium with the addition of Ce and Sb.

Selective catalytic reduction technology using NH3 as a reducing agent (NH3-SCR) is an effective control method to remove nitrogen oxides. TiO2-supported vanadium oxide catalysts with different levels of Ce and Sb modification were prepared by an impregnation method and were characterized by X-ray diffractometer (XRD), Brunauer-Emmett-Teller (BET), Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS), Raman and Hydrogen temperature-programmed reduction (H2-TPR). The catalytic activities of V5CexSby/TiO2 catalysts for denitration were investigated in a fixed bed flow microreactor. The results showed that cerium, vanadium and antimony oxide as the active components were well dispersed on TiO2, and the catalysts exhibited a large number of d-d electronic transitions, which were helpful to strengthen SCR reactivity. The V5CexSby/TiO2 catalysts exhibited a good low temperature NH3-SCR catalytic activity. In the temperature range of 210 to 400°C, the V5CexSby/TiO2 catalysts gave NO conversion rates above 90%. For the best V5Ce35Sb2/TiO2 catalyst, at a reaction temperature of 210°C, the NO conversion rate had already reached 90%. The catalysts had different catalytic activity with different Ce loadings. With the increase of Ce loading, the NO conversion rate also increased.

Hierarchical macro-meso-microporous ZSM-5 zeolite hollow fibers with highly efficient catalytic cracking capability.

Zeolite fibers have attracted growing interest for a range of new applications because of their structural particularity while maintaining the intrinsic performances of the building blocks of zeolites. The fabrication of uniform zeolite fibers with tunable hierarchical porosity and further exploration of their catalytic potential are of great importance. Here, we present a versatile and facile method for the fabrication of hierarchical ZSM-5 zeolite fibers with macro-meso-microporosity by coaxial electrospinning. Due to the synergistic integration of the suitable acidity and the hierarchical porosity, high yield of propylene and excellent anti-coking stability were demonstrated on the as-prepared ZSM-5 hollow fibers in the catalytic cracking reaction of iso-butane. This work may also provide good model catalysts with uniform wall thickness and tunable porosity for studying a series of important catalytic reactions.

Effect of Ce doping of TiO2 support on NH3-SCR activity over V2O5-WO3/CeO2-TiO2 catalyst.

CeO2-TiO2 composite supports with different Ce/Ti molar ratios were prepared by a homogeneous precipitation method, and V2O5-WO3/CeO2-TiO2 catalysts for the selective catalytic reduction (SCR) of NOx with NH3 were prepared by an incipient-wetness impregnation method. These catalysts were characterized by means of BET, XRD, UV-Vis, Raman and XPS techniques. The results showed that the catalytic activity of V2O5-WO3/TiO2 was greatly enhanced by Ce doping (molar ratio of Ce/Ti=1/10) in the TiO2 support. The catalysts that were predominantly anatase TiO2 showed better catalytic performance than the catalysts that were predominantly fluorite CeO2. The Ce additive could enhance the surface adsorbed oxygen and accelerate the SCR reaction. The effects of O2 concentration, ratio of NH3/NO, space velocity and SO2 on the catalytic activity were also investigated. The presence of oxygen played an important role in NO reduction. The optimal ratio of NH3/NO was 1/1 and the catalyst had good resistance to SO2 poisoning.

Preparation, characterization and origin of highly active and thermally stable Pd-Ce0.8Zr0.2O2 catalysts via sol-evaporation induced self-assembly method.

The Pd-Ce-Zr solid solution catalysts were in situ synthesized by a sol-evaporation induced self-assembly (SEISA) method. The catalytic performances of the as-prepared catalysts for CO oxidation and their physicochemical properties were investigated with various characterization techniques. The catalysts with low doping amount of Pd exhibited unique thermal stability and high activity toward CO oxidation. The CO oxidation activities of the catalysts showed a volcano type relationship with the content of Pd doping in Ce-Zr oxides. Pd-Ce(0.8)Zr(0.2)O2 with 1.0% Pd doping gave the highest catalytic activity. Its CO complete conversion temperature was 110 °C with a turnover frequency of 1.52 s(-1). Density functional theory (DFT) calculations suggested strong effects of Pd doping on the crystal structure, charge distribution and formation of oxygen vacancy of the Ce-based catalysts. The calculations also suggested that CO oxidation on Pd doped Ce-based catalysts follows Eley-Rideal mechanism, and the direct reaction of CO with a surface oxygen atom appears to be the main pathway of the oxidation.