Fullerene on non-iron cluster-matrix co-catalysts promotes collaborative H2 and N2 activation for ammonia synthesis.

Developing highly effective catalysts for ammonia (NH3) synthesis is a challenging task. Even the current, prevalent iron-derived catalysts used for industrial NH3 synthesis require harsh reaction conditions and involve massive energy consumption. Here we show that anchoring buckminsterfullerene (C60) onto non-iron transition metals yields cluster-matrix co-catalysts that are highly efficient for NH3 synthesis. Such co-catalysts feature separate catalytic active sites for hydrogen and nitrogen. The 'electron buffer' behaviour of C60 balances the electron density at catalytic transition metal sites and enables the synergistic activation of nitrogen on transition metals in addition to the activation and migration of hydrogen on C60 sites. As demonstrated in long-term, continuous runs, the C60-promoting transition metal co-catalysts exhibit higher NH3 synthesis rates than catalysts without C60. With the involvement of C60, the rate-determining step in the cluster-matrix co-catalysis is found to be the hydrogenation of *NH2. C60 incorporation exemplifies a practical approach for solving hydrogen poisoning on a wide variety of oxide-supported Ru catalysts.

Triple Templates Directed Synthesis of Nitrogen-Doped Hierarchically Porous Carbons from Pyridine Rich Monomer as Efficient and Reversible SO2 Adsorbents.

Herein, a variety of 2,6-diaminopyridine (DAP) derived nitrogen-doped hierarchically porous carbon (DAP-NHPC-T) prepared from carbonization-induced structure transformation of DAP-Zn-SiO2-P123 nanocomposites are reported, which are facilely prepared from solvent-free co-assembly of block copolymer templates P123 with pyridine-rich monomer of DAP, Zn(NO3)2 and tetramethoxysilane. In the pyrolysis process, P123 and SiO2 templates promote the formation of mesoporous and supermicroporous structures in the DAP-NHPC-T, while high-temperature volatilization of Zn contributed to generation of micropores. The DAP-NHPC-T possess large BET surface areas (≈956-1126 m2 g-1), hierarchical porosity with micro-supermicro-mesoporous feature and high nitrogen contents (≈10.44-5.99 at%) with tunable density of pyridine-based nitrogen sites (≈5.99-3.32 at%), exhibiting good accessibility and reinforced interaction with SO2. Consequently, the DAP-NHPC-T show high SO2 capacity (14.7 mmol g-1, 25 °C and 1.0 bar) and SO2/CO2/N2 IAST selectivities, extraordinary dynamic breakthrough separation efficiency and cycling stability, far beyond any other reported nitrogen-doped metal-free carbon. As verified by in situ spectroscopy and theoretical calculations, the pyridine-based nitrogen sites of the DAP-NHPC-T boost SO2 adsorption via the unique charge transfer, the adsorption mechanism and reaction model have been finally clarified.

Precious-Metal-Free Mo-MXene Catalyst Enabling Facile Ammonia Synthesis Via Dual Sites Bridged by H-Spillover.

To date, NH3 synthesis under mild conditions is largely confined to precious Ru catalysts, while nonprecious metal (NPM) catalysts are confronted with the challenge of low catalytic activity due to the inverse relationship between the N2 dissociation barrier and NHx (x = 1-3) desorption energy. Herein, we demonstrate NPM (Co, Ni, and Re)-mediated Mo2CTx MXene (where Tx denotes the OH group) to achieve efficient NH3 synthesis under mild conditions. In particular, the NH3 synthesis rate over Re/Mo2CTx and Ni/Mo2CTx can reach 22.4 and 21.5 mmol g-1 h-1 at 400 °C and 1 MPa, respectively, higher than that of NPM-based catalysts and Cs-Ru/MgO ever reported. Experimental and theoretical studies reveal that Mo4+ over Mo2CTx has a strong ability for N2 activation; thus, the rate-determining step is shifted from conventional N2 dissociation to NH2* formation. NPM is mainly responsible for H2 activation, and the high reactivity of spillover hydrogen and electron transfer from NPM to the N-rich Mo2CTx surface can efficiently facilitate nitrogen hydrogenation and the subsequent desorption of NH3. With the synergistic effect of the dual active sites bridged by H-spillover, the NPM-mediated Mo2CTx catalysts circumvent the major obstacle, making NH3 synthesis under mild conditions efficient.

Targeting Neuraminidase 4 Attenuates Kidney Fibrosis in Mice.

Despite significant progress in therapy, there remains a lack of substantial evidence regarding the molecular factors that lead to renal fibrosis. Neuraminidase 4 (NEU4), an enzyme that removes sialic acids from glycoconjugates, has an unclear role in chronic progressive fibrosis. Here, this study finds that NEU4 expression is markedly upregulated in mouse fibrotic kidneys induced by folic acid or unilateral ureter obstruction, and this elevation is observed in patients with renal fibrosis. NEU4 knockdown specifically in the kidney attenuates the epithelial-to-mesenchymal transition, reduces the production of pro-fibrotic cytokines, and decreases cellular senescence in male mice. Conversely, NEU4 overexpression exacerbates the progression of renal fibrosis. Mechanistically, NEU4254-388aa interacts with Yes-associated protein (YAP) at WW2 domain (231-263aa), promoting its nucleus translocation and activation of target genes, thereby contributing to renal fibrosis. 3,5,6,7,8,3',4'-Heptamethoxyflavone, a natural compound, is identified as a novel NEU4 inhibitor, effectively protecting mice from renal fibrosis in a NEU4-dependent manner. Collectively, the findings suggest that NEU4 may represent a promising therapeutic target for kidney fibrosis.

Single-atom and cluster catalysts for thermocatalytic ammonia synthesis at mild conditions.

Ammonia (NH3) is closely related to the fields of food and energy that humans depend on. The exploitation of advanced catalysts for NH3 synthesis has been a research hotspot for more than one hundred years. Previous studies have shown that the Ru B5 sites (step sites on the Ru (0001) surface uniquely arranged with five Ru atoms) and Fe C7 sites (iron atoms with seven nearest neighbors) over nanoparticle catalysts are highly reactive for N2-to-NH3 conversion. In recent years, single-atom and cluster catalysts, where the B5 sites and C7 sites are absent, have emerged as promising catalysts for efficient NH3 synthesis. In this review, we focus on the recent advances in single-atom and cluster catalysts, including single-atom catalysts (SACs), single-cluster catalysts (SCCs), and bimetallic-cluster catalysts (BCCs), for thermocatalytic NH3 synthesis at mild conditions. In addition, we discussed and summarized the unique structural properties and reaction performance as well as reaction mechanisms over single-atom and cluster catalysts in comparison with traditional nanoparticle catalysts. Finally, the challenges and prospects in the rational design of efficient single-atom and cluster catalysts for NH3 synthesis were provided.

Designed Synthesis of Fe/Zr Bimetallic Organic Framework to Enhance the Selective Conversion of H2S to Sulfur.

The development of stable and effective catalysts to convert toxic H2S into high value-added sulfur is essential for production safety and environmental protection. However, the inherent defects of traditional iron- and zirconium-based catalysts, such as poor activity, high oxygen consumption, and low sulfur selectivity, limit their further developments and applications. Herein, the Fe-Zr bimetallic organic framework FeUIO-66(x) with different cubic morphologies was synthesized via a facile solvothermal method. The results indicate that the introduction of Fe not only increases the specific surface area and weak L-sites of the catalyst without changing its crystal structure, which provides enough reaction space and more active sites for the adsorption and activation of H2S, but also reduces the activation energy of the reaction, significantly promoting the selective oxidation of H2S. As a result, the as-obtained FeUIO-66(1) catalyst exhibits the highest desulfurization activity and superior durability and water resistance stability, and its H2S conversion and sulfur selectivity within 50 h are 100 and 88%, respectively. More importantly, the structure of the catalyst after the desulfurization reaction is consistent with that of the fresh counterpart. The study offers new insights into the development of effective and stable bimetallic catalysts to eliminate H2S and recycle sulfur.

Interfacial Engineering Boosting the Activity and Stability of MIL-53(Fe) toward Electrocatalytic Nitrogen Reduction.

The electrochemical nitrogen reduction reaction (eNRR) has emerged as a promising strategy for green ammonia synthesis. However, it suffers unsatisfactory reaction performance owing to the low aqueous solubility of N2 in aqueous solution, the high dissociation energy of N≡N, and the unavoidable competing hydrogen evolution reaction (HER). Herein, a MIL-53(Fe)@TiO2 catalyst is designed and synthesized for highly efficient eNRR. Relative to simple MIL-53(Fe), MIL-53(Fe)@TiO2 achieves a 2-fold enhancement in the Faradaic efficiency (FE) with an improved ammonia yield rate by 76.5% at -0.1 V versus reversible hydrogen electrode (RHE). After four cycles of electrocatalysis, MIL-53(Fe)@TiO2 can maintain a good catalytic activity, while MIL-53(Fe) exhibits a significant decrease in the NH3 yield rate and FE by 79.8 and 82.3%, respectively. Benefiting from the synergetic effect between TiO2 and MIL-53(Fe) in the composites, Fe3+ ions can be greatly stabilized in MIL-53(Fe) during the eNRR process, which greatly hinders the catalyst deactivation caused by the electrochemical reduction of Fe3+ ions. Further, the charge transfer ability in the interface of composites can be improved, and thus, the eNRR activity is significantly boosted. These findings provide a promising insight into the preparation of efficient composite electrocatalysts.

Boosting N2 Conversion into NH3 over Ru Catalysts via Modulating the Ru-Promoter Interface.

Promoters are indispensable components of Ru-based catalysts to promote N2 activation in ammonia (NH3) synthesis. The rational addition and regulation of promoters play a critical role in affecting the NH3 synthesis rate. In this work, we report a simple method by altering the loading sequence of Ba and Ru species to modulate the Ru-promoter interface, thus significantly boosting the NH3 synthesis rate. The Ba-Ru/GC BM catalyst via the prior loading of Ba rather than Ru over graphitic carbon (GC) exhibits a high NH3 synthesis rate of 18.7 mmol gcat-1 h-1 at 400 °C and 1 MPa, which is 2.5 times that of the Ru-Ba/GC BM catalyst via the conventional prior loading of Ru rather than Ba on GC. Our studies reveal that the prior loading of Ba benefits the high dispersion of the basic Ba promoter over an electron-withdrawing GC support, and then Ba species serve as structural promoters to stabilize Ru with small particle sizes, which exposes more active sites for N2 activation. Additionally, the intimate Ba and Ru interface enables facile electron donation from Ba to Ru sites, thus accelerating N2 dissociation to realize efficient NH3 synthesis. This work provides a simple approach to modulating the Ru-promoter interface and maximizing promoter utilization to enhance NH3 synthesis performance.

Counting d-Orbital Vacancies of Transition-Metal Catalysts for the Sulfur Reduction Reaction.

The electrocatalytic sulfur reduction reaction (SRR) would allow the production of renewable high-capacity rechargeable lithium-sulfur (Li-S) batteries using sustainable and nontoxic elemental sulfur as a cathode material, but its slow reaction rate causes a serious shuttle effect and dramatically reduces the capacity. We found that a catalyst composed of Pd nanoparticles supported by ordered mesoporous carbon (Pd/OMC) had a high reaction rate in the SRR, and a Li-S battery assembled with this catalyst had a low shuttle constant of 0.031 h-1 and a high-rate performance with a specific capacity of 1527 mAh g-1 at 0.1 C which is close to the theoretical value. The high activity of Pd/OMC with a d-orbital vacancy of 0.87 e was predicted from a volcano relationship between the d charge for the metal and the adsorption activation entropy and reaction rate for the SRR by examining Pd, Au, Pt, Rh, and Ru transition-metal nanocatalysts. The strategy of using a single electronic structure descriptor to design high-efficiency SRR catalysts has suggested a way to produce practical Li-S batteries.

Boosting the ammonia synthesis activity of ceria-supported Ru catalysts achieved through trace Pr addition.

The amount of dopant used in conventional cases for improving catalytic performance is higher than 5%. In this work, a strategy to enhance the ammonia synthesis performance of a Ru/CeO2 catalyst by using trace Pr (0.1 mol%) is reported. Owing to the improvement of oxygen defects, Ce3+ concentration and interfaced Ru species, the hydrogen adsorption was enhanced, and the desorption of hydrogen species would be promoted. As a result, Ru/CeO2 with 0.1 mol% Pr shows 1.4 times higher ammonia synthesis rate and excellent stability compared to Ru/CeO2 or the sample with high Pr loading (50 mol% Pr). This study provides a new idea for the design of high-efficiency ammonia synthesis catalysts.

Elucidation of Anti-Hypertensive Mechanism by a Novel Lactobacillus rhamnosus AC1 Fermented Soymilk in the Deoxycorticosterone Acetate-Salt Hypertensive Rats.

Dietary intake of fermented soymilk is associated with hypotensive effects, but the mechanisms involved have not been fully elucidated. We investigated the anti-hypertensive effects of soymilk fermented by L. rhamnosus AC1 on DOCA-salt hypertension from the point of view of oxidative stress, inflammatory response and alteration of the gut microbiome. The antioxidant assays in vitro indicated the ethanol extract (EE) of L. rhamnosus AC1 fermented soymilk showed better antioxidative effects than the water extract (WE). Those extracts displayed a hypotensive effect using a tail-cuff approach to measuring blood pressure and improved nitric oxide (NO), angiotensin II (Ang II), tumor necrosis factor-α (TNF-α) and interleukin factor-6 (IL-6) on DOCA-salt hypertensive rats. Furthermore, cardiac and renal fibrosis were attenuated by those extracts. The gut microbiota analysis revealed that they significantly reduced the abundance of phylum Proteobacteria, its family Enterobacteriaceae and genus Escherichia-Shigella. Moreover, metabolomic profiling revealed several potential gut microbiota-related metabolites which appeared to involve in the development and recovery of hypertension. In conclusion, fermented soymilk is a promising nutritional intervention strategy to improve hypertension via reducing inflammation and reverting dysbiotic microbiota.

Gas-template directed in situ synthesis of highly nitrogen-doped carbon nanotubes with superior sulfur compatibility and enhanced functionalities.

Herein, we develop a low temperature gas template route for in situ growth of highly nitrogen-doped (5.68 wt%), multi-walled carbon nanotubes (N-MWCNTs). The N-MWCNTs exhibit superior sulfur compatibility in hydrogen sulfide (H2S) resource utilization, thus resulting in their enhanced functionality as Li-S cathodes with high sulfur-specific capacity and retention rate.

Enhanced ammonia synthesis activity of carbon-supported Mo catalyst by Mo carburization.

It is urgent to develop new efficient ammonia synthesis catalysts using non-precious metals. Herein, the Mo2C species is introduced into a carbon-supported Mo catalyst by in situ carburization of a carbon-supported Mo catalyst in H2. In combination with the presence of the Mo2C phase as well as the enhancement of the graphitization degree of carbon and the amount of the low-valent Mo species, the migration and the exchange of the adsorbed species with the gaseous species are accelerated. As a result, the catalyst with carbonization treatment shows higher ammonia synthesis activity than the sample without carbonization, and the ill effect of the poisoning of reagent gases also is alleviated.

The Role of Fecal Microbiota in Liver Toxicity Induced by Perfluorooctane Sulfonate in Male and Female Mice.

BACKGROUND: Perfluorooctane sulfonate (PFOS) is a persistent organic pollutant that can cause hepatotoxicity. The underlying toxicological mechanism remains to be investigated. Given the critical role of fecal microbiota in liver function, it is possible that fecal microbiota may contribute to the liver toxicity induced by PFOS. OBJECTIVES: We aimed to investigate the role of liver-fecal microbiota axis in modulating PFOS-induced liver injury in mice. METHODS: Male and female mice were exposed to PFOS or vehicle for 14 d. In this investigation, 16S rDNA sequencing and metabolomic profiling were performed to identify the perturbed fecal microbiota and altered metabolites with PFOS exposure. In addition, antibiotic treatment, fecal microbiota transplantation, and bacterial administration were conducted to validate the causal role of fecal microbiota in mediating PFOS-induced liver injury and explore the potential underlying mechanisms. RESULTS: Both male and female mice exposed to PFOS exhibited liver inflammation and steatosis, which were accompanied by fecal microbiota dysbiosis and the disturbance of amino acid metabolism in comparison with control groups. The hepatic lesions were fecal microbiota-dependent, as supported by antibiotic treatment and fecal microbiota transplantation. Mice with altered fecal microbiota in antibiotic treatment or fecal microbiota transplantation experiments exhibited altered arginine concentrations in the liver and feces. Notably, we observed sex-specific lower levels of key microbiota, including Lactobacillus, Enterococcus, and Akkermansia. Mice treated with specific bacteria showed lower arginine levels and lower expression of the phosphorylated mTOR and P70S6K, suggesting lower activity of the related pathway and mitigation of the pathological differences observed in PFOS-exposed mice. CONCLUSIONS: Our study demonstrated the critical role of the fecal microbiota in PFOS-induced liver injury in mice. We also identified several critical bacteria that could protect against liver injury induced by PFOS in male and female mice. Our present research provided novel insights into the mechanism of PFOS-induced liver injury in mice. https://doi.org/10.1289/EHP10281.

Spatially revealed perfluorooctane sulfonate-induced nephrotoxicity in mouse kidney using atmospheric pressure MALDI mass spectrometry imaging.

Perfluorooctane sulfonate (PFOS), an emerging environmental persistent pollutant, has attracted extensive attention due to its potential nephrotoxicity. However, little is known about the spatial variations of lipid metabolism associated with PFOS exposure. In this study, atmospheric pressure matrix-assisted laser desorption/ionization mass spectrometry imaging (AP-MALDI MSI) was used to reveal the spatial distributions of PFOS and its adverse effect on lipid metabolism directly in mouse kidney sections. We have observed that PFOS accumulated in the renal pelvis and outer cortex regions, with some found in the medulla and inner cortex regions. Hematoxylin and eosin (H&E) staining results also demonstrated that the accumulation of PFOS caused damage to the mouse kidney, which was consistent with AP-MALDI MSI results. Furthermore, a total of 42 lipids were shown to be significantly different in the spatial distribution patterns and variations between control and PFOS exposure mice groups, including the significant down-regulation of lyso-glycerophospholipids (Lyso-GPs), phosphatidic acids (PA), phosphatidylcholines (PC), phosphatidylethanolamines (PE), phosphatidylserines (PS) sphingomyelins (SM) and sulfatides (ST) in renal medulla or cortex region of mouse kidney sections, and remarkable up-regulation of cholesterol and phosphatidylinositols (PI) in the cortex regions of mouse kidney sections. The AP-MALDI MSI provides a new tool to explore spatial distributions and variations of the endogenous metabolites for the risk assessment of environmental pollutants.

Efficiently Integrated Desulfurization from Natural Gas over Zn-ZIF-Derived Hierarchical Lamellar Carbon Frameworks.

Selective removal of carbonyl sulfide (COS) and hydrogen sulfide (H2S) is the key step for natural gas desulfurization due to the highly toxic and corrosive features of these gaseous sulfides, and efficient and stable desulfurizers are urgently needed in the industry. Herein, we report a class of nitrogen-functionalized, hierarchically lamellar carbon frameworks (N-HLCF-xs), which are obtained from the structural transformation of Zn zeolitic imidazolate frameworks via controllable carbonization. The N-HLCF-xs possess the desirable characteristics of large Brunauer-Emmett-Teller surface areas (645-923 m2/g), combined primary three-dimensional microporosity and secondary two-dimensional lamellar microstructure, and high density of nitrogen base sites with enhanced pyridine ratio (17.52 wt %, 59.91%). The anchored nitrogen base sites in N-HLCF-xs show improved accessibility, which boosts their interaction with acidic COS and H2S. As expected, N-HLCF-xs can be employed as multifunctional and efficient desulfurizers for selective removal of COS and H2S from natural gas. COS was first transformed into H2S via catalytic hydrolysis, and the produced H2S was then captured and separated and catalyzed oxidation into elemental sulfur. The above continuous processes can be achieved with solo N-HLCF-xs, giving extremely high efficiencies and reusability. Their integrated desulfurization performance was better than many desulfurizers used in the area, such as activated carbon, ß zeolite, MIL-101(Fe), K2CO3/γ-Al2O3, and FeOx/TiO2.

Sustainable synthesis of ordered mesoporous materials without additional solvents.

Micelles with well-defined nanostructures were generally formed in the presence of a suitable solvent. We report herein the accelerated construction of micelles with ordered nanostructures without assistance of additional solvents. The micelles were employed for ultrafast fabrication of ordered mesoporous silicas (OMS) using tetramethyl orthosilicate (TMOS) as silica source. When γ-aminopropyl triethoxysilane precursor was introduced, we obtained amine group (-NH2) decorated ordered mesoporous silicas (OMS-NH2-x, where x stands for the molar ratio of γ-aminopropyl triethoxysilane to TMOS). The resulted materials are large in BET surface area and tunable in content of -NH2 site, which are highly efficient for catalytic elimination of gaseous carbonyl sulfide and hydrogen sulfide. Using this strategy, other functionalized groups such as thiol and benzene can be also introduced into OMS. Furthermore, the introducing of phenolic precursor into the system leads to multiphase co-assembly for the formation of ordered mesoporous silica-polymer nanocomposites. It is demonstrated that the solvent-free ultrafast assembly offers a sustainable route for preparation of ordered mesoporous functional materials.

Bimetallic Metal-Organic Frameworks MIL-53(xAl-yFe) as Efficient Catalysts for H2S Selective Oxidation.

Catalytic oxidation of H2S is a crucial green pathway that can fully convert H2S into value-added elemental S for commercial use. However, achieving high catalytic stability and S selectivity by traditional-metal-based catalysts still remain a major challenge. Herein, a facile one-step solvothermal strategy is designed for the fabrication of bimetallic MIL-53(xAl-yFe) catalysts. The as-synthesized MIL-53(1Al-5Fe) possesses ample coordinatively unsaturated metal sites, which served as efficient catalytic sites for the selective oxidation of H2S. As a result, the representative MIL-53(1Al-5Fe) achieves a S yield of nearly 100% at 100-160 °C with almost no obvious decrease of catalytic stability in the run of 30 h. Under the defined reaction conditions, the bimetallic metal-organic frameworks are obviously superior to MIL-53(Al) (49.3%) and MIL-53(Fe) (70.5%) in S yield. This study suggests that the introduction of elemental Al into MIL-53(xAl-yFe) could effectively modulate the electronic properties and spatial configuration of the catalysts, further conducing the adsorption and activation of H2S and thus accelerating the dissociation of H2S into a key intermediate S* and improving their catalytic performance.

Highly Poison-Resistant Single-Atom Co-N4 Active Sites with Superior Operational Stability over 460 h for H2 S Catalytic Oxidation.

Efficient catalytic elimination of hydrogen sulfide (H2 S) with high activity and durability in nature gas and blast-furnace gas is very critical for both fundamental catalytic research and applied environmental chemistry. Herein, atomically dispersed Co atom catalysts with Co-N4 sites that can transform H2 S into S with conversion rate of ≈100% are designed and prepared. The representative 4Co-N/NC achieves a sulfur yield of nearly 100% and TOF(Co) of 869 h-1 at 180 °C. Importantly, remarkable long-term durability is achieved as well, with no obvious loss of catalytic activity in the run of 460 h, outperforming most of the reported catalysts. The short bond length and strong cooperation of Co-N are beneficial to improve the structural stability of the Co-N4 centers, and significantly enhanced resistance of water and sulfation over single-atom Co-catalyst. The present mechanism involves the stepwise hydrogen transfer process via the adsorbed *HOO and *HS intermediates.

Integration of omics analysis and atmospheric pressure MALDI mass spectrometry imaging reveals the cadmium toxicity on female ICR mouse.

Acute cadmium toxicity induces multi-system organ failure. Mass spectrometry (MS)-based omics analyses and atmospheric pressure matrix-assisted laser desorption/ionization mass spectrometry imaging (AP-MALDI MSI) are powerful tools for characterizing the biomarkers. Many studies on cadmium toxicity by metabolomics have been investigated, whereas the applications of lipidomics and MSI studies are still inadequate. In this study, the systematic metabolomics study on female ICR mice tissues including liver, kidney, heart, stomach, brain as well as spleen under cadmium exposure was firstly conducted and lipidomic characterizations on female ICR mice liver, kidney and heart were further constructed step by step. To deeply understand its toxicological mechanisms, several representative lipids on the mouse liver were visualized by AP-MALDI MSI. The results demonstrated that exposure to cadmium caused significant metabolic alterations in the liver, kidney and heart among all the tissues. Additionally, the toxicological mechanisms of cadmium in the mouse models are closely associated with the inflammation response, energy expenditure, oxidative stress, DNA and mitochondria damage, and lipid homeostasis. These insights could enhance knowledge in acute cadmium toxicity of public health and guide risk assessment in the future.