A Robust Chromatographic Method for Drug Release profiling of liposomal doxorubicin HCl.

Liposomes are excellent drug delivery vehicles for chemotherapeutics as they may change the pharmacokinetics of therapeutic compounds, resulting in altered tissues distribution, and in some cases, reduced cytotoxicity and enhanced distribution and efficacy of the active pharmaceutical ingredient (API) at target tissues. Drug release profiles of liposomal formulations are crucial to support equivalence evaluation and quality control in pre- and post-approval stages. We developed an automated chromatographic method for quantifying the drug release profile of liposomal formulations containing doxorubicin to overcome the shortcomings of currently available methods. The newly developed method employs nanoparticle exclusion chromatography (nPEC), using a monolithic silica column coated with polyvinylpyrrolidone to separate the released drug from liposomal encapsulated drug. We evaluated the effects of pH, temperature, and ammonium formate concentration on the drug release rate. The optimized release buffer consisting of 5 % sucrose, 20 mM l-histidine, and 200 mM ammonium formate was selected for the drug release profiling of five liposomal formulations at 47 °C. The drug release profiles of five liposomal doxorubicin formulations were similar. Our automated method requires very small amounts of the sample and provides release profiles with high sensitivity and accuracy. In addition, this method can be applied to other liposomal products to allow for simple, fast, and accurate analysis of in vitro drug release profiling.

Excipient-related impurities in liposome drug products.

Liposomes are widely used in the pharmaceutical industry as drug delivery systems to increase the efficacy and reduce the off-target toxicity of active pharmaceutical ingredients (APIs). The liposomes are more complex drug delivery systems than the traditional dosage forms, and phospholipids and cholesterol are the major structural excipients. These two excipients undergo hydrolysis and/or oxidation during liposome preparation and storage, resulting in lipids hydrolyzed products (LHPs) and cholesterol oxidation products (COPs) in the final liposomal formulations. These excipient-related impurities at elevated concentrations may affect liposome stability and exert biological functions. This review focuses on LHPs and COPs, two major categories of excipient-related impurities in the liposomal formulations, and discusses factors affecting their formation, and analytical methods to determine these excipient-related impurities.

Lessons learned from regulatory submissions involving endogenous therapeutic analyte bioanalysis.

Endogenous therapeutic analytes include hormones, neurotransmitters, vitamins, fatty acids and inorganic elements that are naturally present in the body because either the body produces them or they are present in the normal diet. The accurate measurement of endogenous therapeutic analytes poses a challenge when the administered exogenous therapeutic analyte and its endogenous counterpart cannot be distinguished. In this article, real case examples with endogenous therapeutic analyte bioanalysis during drug development in support of regulatory submissions are collected and presented. The article highlights common challenges encountered and lessons learned related to bioanalysis of endogenous therapeutic analytes and provides practical tips and strategies to consider from a regulatory perspective.

An Automated Electroanalytical Method for the Drug Release Profiling of Liposomal Doxorubicin HCl Formulations.

Liposomes have emerged as a drug delivery system for various chemotherapeutics providing enhanced bioavailability and reduced toxicity. In vitro drug release profiling of liposomal formulations is one of the essential tests for the premarket approval and post market quality control. We developed an automated electroanalytical method for drug release profiling of liposomal doxorubicin formulation. In this electroanalytical method, square wave voltammetry mode was selected to determine the released drug, the only redox-active analyte, by measuring the current at the pulsed potential ranges. Therefore, no separation from liposomal encapsulated doxorubicin is needed. This electroanalytical method provided a continuous drug release measurement for 24 h. The drug release increased as the release media pH and temperature increased. At 37 °C, the drug release increased from 7 % to 40 % when the pH increased from 5.5 to 7.4, In addition, at pH 6.5, as the temperature increased from 37 °C to 52 °C, total drug release increased by more than two-fold. Complete drug release (more than 80 %) was obtained at pH 6.5 and 52 °C in less than 3 h. The brand name and the two generic formulations showed similar drug release profile in all experimental conditions. This method is an alternative to traditional methods which require separation steps such as dialysis or solid phase extraction to quantitate released doxorubicin. This method may be further applied in the in vitro release testing of other liposomal formulations containing redox-active drug substances, e.g., liposomes encapsulating daunorubicin.

iBCS: 3. A Biopharmaceutics Classification System for Orally Inhaled Drug Products.

In this article, we specify for the first time a quantitative biopharmaceutics classification system for orally inhaled drugs. To date, orally inhaled drug product developers have lacked a biopharmaceutics classification system like the one developed to navigate the development of immediate release of oral medicines. Guideposts for respiratory drug discovery chemists and inhalation product formulators have been elusive and difficult to identify due to the complexity of pulmonary physiology, the intricacies of drug deposition and disposition in the lungs, and the influence of the inhalation delivery device used to deliver the drug as a respirable aerosol. The development of an inhalation biopharmaceutics classification system (iBCS) was an initiative supported by the Product Quality Research Institute (PQRI). The goal of the PQRI iBCS working group was to generate a qualitative biopharmaceutics classification system that can be utilized by inhalation scientists as a "rule of thumb" to identify desirable molecular properties and recognize and manage CMC product development risks based on physicochemical properties of the drug and the deposited lung dose. Herein, we define the iBCS classes quantitatively according to the dose number and permeability. The proposed iBCS was evaluated for its ability to categorize marketed inhaled drugs using data from the literature. The appropriateness of the classification of each drug was assessed based on published development, clinical and nonclinical data, and mechanistic physiologically based biopharmaceutics modeling. The inhaled drug product development challenges for each iBCS classification are discussed and illustrated for different classes of marketed inhaled drugs. Finally, it is recognized that discriminatory laboratory methods to characterize regional lung deposition, dissolution, and permeability will be key to fully realizing the benefits of an iBCS to streamline and derisk inhaled drug development.

An Automated Capillary Electrophoresis Based Method for Drug Release Profiling of Liposomal Doxorubicin.

Liposomal doxorubicin hydrochloride is an antineoplastic agent widely used against human cancers. The data from in vitro drug release test (IVRT) is essential for quality and/or bioequivalence evaluation in drug approval and post-approval regulation of liposomal drug products. However, most of the currently available IVRT methods for liposomal doxorubicin hydrochloride have experimental deficiencies associated with liposomal rupture during the separation process which is needed for selective quantification of released drug from liposomal-bound drug. In addition, many of the methods are time consuming, requiring bulk quantities of liposomal drug product, and lack of automation. We have developed a selective, sensitive, and automated capillary electrophoresis (CE)-based IVRT method, measuring released doxorubicin without additional sampling and separation steps. This method requires a small volume of sample compared to currently available methods. The IVRT release study with liposomal doxorubicin was conducted at different temperatures and pH conditions. It was observed that the release profiles obtained for five formulations including the reference listed drug were similar at pH 6.50 and 47.0 °C. The drug release increased with the increase of media pH and temperature. Complete doxorubicin release (100 %) was obtained in 7 h at pH 6.50 and 47.0 °C, and in less than 3 h at pH 6.50 and 52.0 °C. This CE-based method can be extended for determination of the IVRT profiling of other liposomal drug products.

Global harmonization of immediate-release solid oral drug product bioequivalence recommendations and the impact on generic drug development.

Immediate-release (IR) solid oral drug products constitute a significant portion of approved drug products and products under development. Bioequivalence (BE) assessment for these oral products is important for establishing therapeutic equivalence for generic products to their respective comparator products. In December 2022, the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) published the first new draft guideline on BE for IR solid oral dosage forms (M13A). To support the development of ICH M13A, we comprehensively reviewed the landscape of oral IR products approved by the U.S. Food and Drug Administration (FDA) and compared BE recommendations for these products in the current U.S. FDA and European Medicines Agency (EMA) BE guidances. We utilized databases including Drugs@FDA, Orange Book, and product-specific guidances (PSGs) published on the U.S. FDA and EMA websites to collect information. Oral IR products account for 46% of all FDA-approved new drug applications currently listed in Orange Book with 82.5% solids, 0.9% semi-solids, and 16.6% liquids. For all published U.S. FDA PSGs for solid oral IR products, in vivo BE studies with pharmacokinetic (PK) endpoints account for 88% of BE approaches recommended. Of these PK BE studies, 86.5% recommended fasting and fed BE studies, while only 15.9% EMA PSGs recommended both fasting and fed BE studies. This review helps clarify the scope of U.S. solid oral IR products impacted by the new ICH M13A draft guideline and demonstrates how recommendations in draft ICH M13A could significantly harmonize BE recommendations for IR oral products to facilitate global drug development.

Profiling in-vitro release of verteporfin from VISUDYNE® liposomal formulation and investigating verteporfin binding to human serum albumin.

VISUDYNE® is a liposomal formulation of verteporfin, used in the photodynamic therapy of age-related macular degeneration via intravenous administration. In this study, we developed a new in vitro method to quantify verteporfin release from VISUDYNE® under conditions that replicate in vivo conditions using human serum albumin (HSA). Verteporfin release from the liposomes was quantified using capillary electrophoresis (CE) with optical detection. Verteporfin binding to HSA was quantified by measuring HSA fluorescence that is quenched by drugs binding to specific HSA binding sites. The binding constant of verteporfin to HSA was calculated using the Stern Volmer plot and found to be 1.966 × 107 M-1 at 37 °C. Verteporfin binding to HSA involves one albumin binding site and the binding molar ratio between verteporfin and HSA is approximately 1:1. A rapid partitioning of verteporfin from VISUDYNE® onto HSA takes place within 10 min and involves the release of more than 90% of the verteporfin at physiological temperatures. This study verifies this approach of using CE to rapidly separate liposome and HSA-bound drug, thus minimizing drug release artifacts created with other methods.

Generic lamotrigine extended-release tablets are bioequivalent to innovator drug in fully replicated crossover bioequivalence study.

OBJECTIVE: Lamotrigine is a commonly prescribed antiepileptic drug. U.S. Food and Drug Administration (FDA)-funded clinical studies have demonstrated bioequivalence (BE) for generic lamotrigine immediate-release (IR) products in epilepsy patients with generic substitution. To address the potential concerns about the risk of generic-brand substitution of lamotrigine extended-release (ER) products, considering the complexity of controlled release systems and pharmacokinetic variations associated with possible within-subject variability (WSV), this prospective study assessed (1) BE of generic and brand lamotrigine ER products in a fully replicated BE study design in healthy subjects and (2) whether such fully replicated study design and WSV data can better support the approval of generic lamotrigine ER products. METHODS: This open-label, single-dose, two-treatment, four-period, two-sequence, fully replicated crossover BE study compared generic lamotrigine ER tablet to brand Lamictal XR (200 mg) in 30 healthy subjects under fed conditions. Pharmacokinetics (PK) profiles were generated based on intensive blood sampling up to 144 h. RESULTS: The two products showed comparable peak plasma concentration (Cmax ), area under the concentration-time curve (AUC) from time zero to the last measurable time point (AUC0-t ) and AUC extrapolated to infinity (AUC0-inf ), whereas median time to Cmax (Tmax ) values differed, that is, 10 h for generic and 22 h for brand products, respectively. WSVs for PK metrics were small (~8% of Cmax and ~6% of AUC) and similar between these two products. PK simulation predicted equivalent PK measurements of both products at steady state and after brand-to-generic switch, except the first day upon switching. No serious adverse events were reported. SIGNIFICANCE: The generic lamotrigine ER tablet product demonstrates BE to the brand product in a fully replicated BE study design with healthy subjects, supporting the adequacy of the two-way crossover study design to demonstrate BE and generic-brand substitution of lamotrigine ER products.

Analysis of phospholipids and triacylglycerols in intravenous lipid emulsions.

Intravenous lipid emulsions (ILEs) are used for parenteral nutrition, providing a vital source of essential fatty acids and concentrated energy for patients who are unable to absorb nutrients via the digestive track. They are commonly used to treat local and non-local anesthetic toxicity, and lipophilic drug overdose. ILE are composed of natural lipids, and the composition of these natural lipids can be varied based on their source. The lipids are susceptible to hydrolytic degradation with time, resulting various lipid degradation products such as Lysophosphatidylcholines (LPs), affecting the actual composition of nutrients in the formulation. As a result, the identification and quantification of lipid components, including degradation products, in ILEs are crucial in quality control. In this study, lipids from different batches of ILE Intralipid® 20%, were separated and identified using a UHPLC-ESI-QTOF system and SimLipid® high throughput lipid identification software. Out of 47 lipids identified, 34 were phospholipids (PLs) and the others were triacylglycerols (TAGs). Most of the phospholipids detected were phosphatidylcholines (PC) and Lysophosphatidylcholines (LPC). A total of 9 LPCs, 18 PCs, 6 phosphoethanolamines (PEs), and 1 sphingomyelin (SM) were identified. The LPCs concentration changed with the manufacturing date and storage time. This UHPLC method enabled the identification and quantification of lipids and their decomposition products in complex ILE emulsion mixtures on a single 20-minute chromatographic run.

SNRPB promotes cell cycle progression in thyroid carcinoma via inhibiting p53.

Papillary thyroid carcinoma (PTC) accounts for more than 80% of all thyroid carcinoma cases. Small nuclear ribonucleoprotein polypeptides B and B1 (SNRPB) has been indicated to be carcinogenic in several cancers; however, its function and mechanism in PTC are unclarified. Real time quantitative polymerase chain reaction and western blotting revealed the upregulation of SNRPB and downregulation of tumor protein p53 in PTC tissues compared with the normal tissues. Flow cytometry and western blotting displayed that SNRPB silencing induced cell cycle arrest at G1 phase and suppressed the expression levels of Cyclin family proteins in PTC cells. In vivo experiments suggested that SNRPB silencing inhibited PTC tumor growth in mice. Bioinformatics analysis revealed that the expression of SNRPB and cell cycle-associated genes in thyroid carcinoma tissues is positively correlated. Immunofluorescence staining and co-immunoprecipitation demonstrated that SNRPB directly interacted with p53 and suppressed its expression in PTC cells. In conclusion, SNRPB facilitates cell cycle progression in PTC by inhibiting p53 expression.

iBCS: 1. Principles and Framework of an Inhalation-Based Biopharmaceutics Classification System.

For oral drugs, the formulator and discovery chemist have a tool available to them that can be used to navigate the risks associated with the selection and development of immediate release oral drugs and drug products. This tool is the biopharmaceutics classification system (giBCS). Unfortunately, no such classification system exists for inhaled drugs. The perspective outlined in this manuscript provides the foundational principles and framework for a classification system for inhaled drugs. The proposed classification system, an inhalation-based biopharmaceutics classification system (iBCS), is based on fundamental biopharmaceutics principles adapted to an inhalation route of administration framework. It is envisioned that a classification system for orally inhaled drugs will facilitate an understanding of the technical challenges associated with the development of new chemical entities and their associated new drug products (device and drug formulation combinations). Similar to the giBCS, the iBCS will be based on key attributes describing the drug substance (solubility and permeability) and the drug product (dose and dissolution). This manuscript provides the foundational aspects of an iBCS, including the proposed scientific principles and framework upon which such a system can be developed.

iBCS: 2. Mechanistic Modeling of Pulmonary Availability of Inhaled Drugs versus Critical Product Attributes.

This work is the second in a series of publications outlining the fundamental principles and proposed design of a biopharmaceutics classifications system for inhaled drugs and drug products (the iBCS). Here, a mechanistic computer-based model has been used to explore the sensitivity of the primary biopharmaceutics functional output parameters: (i) pulmonary fraction dose absorbed (Fabs) and (ii) drug half-life in lumen (t1/2) to biopharmaceutics-relevant input attributes including dose number (Do) and effective permeability (Peff). Results show the nonlinear sensitivity of primary functional outputs to variations in these attributes. Drugs with Do < 1 and Peff > 1 × 10-6 cm/s show rapid (t1/2 < 20 min) and complete (Fabs > 85%) absorption from lung lumen into lung tissue. At Do > 1, dissolution becomes a critical drug product attribute and Fabs becomes dependent on regional lung deposition. The input attributes used here, Do and Peff, thus enabled the classification of inhaled drugs into parameter spaces with distinctly different biopharmaceutic risks. The implications of these findings with respect to the design of an inhalation-based biopharmaceutics classification system (iBCS) and to the need for experimental methodologies to classify drugs need to be further explored.

Development of In Vitro Dissolution Testing Methods to Simulate Fed Conditions for Immediate Release Solid Oral Dosage Forms.

In vitro dissolution testing is widely used to mimic and predict in vivo performance of oral drug products in the gastrointestinal (GI) tract. This literature review assesses the current in vitro dissolution methodologies being employed to simulate and predict in vivo drug dissolution under fasted and fed conditions, with emphasis on immediate release (IR) solid oral dosage forms. Notable human GI physiological conditions under fasted and fed states have been reviewed and summarized. Literature results showed that dissolution media, mechanical forces, and transit times are key dissolution test parameters for simulating specific postprandial conditions. A number of biorelevant systems, including the fed stomach model (FSM), GastroDuo device, dynamic gastric model (DGM), simulated gastrointestinal tract models (TIM), and the human gastric simulator (HGS), have been developed to mimic the postprandial state of the stomach. While these models have assisted in expanding physiological relevance of in vitro dissolution tests, in general, these models lack the ability to fully replicate physiological conditions/processes. Furthermore, the translatability of in vitro data to an in vivo system remains challenging. Additionally, physiologically based pharmacokinetic (PBPK) modeling has been employed to evaluate the effect of food on drug bioavailability and bioequivalence. Here, we assess the current status of in vitro dissolution methodologies and absorption PBPK modeling approaches to identify knowledge gaps and facilitate further development of in vitro dissolution methods that factor in fasted and fed states. Prediction of in vivo drug performance under fasted and fed conditions via in vitro dissolution testing and modeling may potentially help efforts in harmonizing global regulatory recommendations regarding in vivo fasted and fed bioequivalence studies for solid oral IR products.

Lack of association between generic brittleness and neuropsychiatric measures in patients with epilepsy.

PURPOSE: In a prior bioequivalence study, generic brittle (GB) patients with epilepsy who were considered at risk of worsened seizures or drug side effects from switching antiepileptic drug (AED) formulations demonstrated no significant difference in their drug levels when switched between a brand and generic AED. An alternative basis for being GB may relate to having a personality or mindset that predisposes to poor outcomes from a formulation switch. The objective of this study was to explore whether GB patients with epilepsy could be differentiated from not GB patients based on standardized measures of personality, mood, outlook, and beliefs. METHODS: This was an exploratory, observational, case-control, non-therapeutic study in patients with epilepsy. Patient interviews were conducted, and histories were collected, yielding each patient (n = 148) to be determined as GB or not GB. Eight neuropsychiatry tests were administered to n = 127 of these patients. Tests included Neuroticism Extraversion Openness Personality Inventory 3 (NEO-PI 3), Life Orientation Test-Revised (LOT-R), Quality of Life in Epilepsy Inventory-89 (QOLIE-89), Adverse Childhood Experiences Score (ACE), Physical Symptoms Questionnaire or Patient Health Questionnaire-15 (PHQ-15), Beck Depression Inventory II (BDI-II), Beck Anxiety Inventory (BAI), and the Beliefs About Medicines Questionnaire Epilepsy (BMQ-Epilepsy). A total of 23 Chi squared analyses, along with logistical regression, were performed to assess which tests and sub-elements associated with GB status. RESULTS: None of the neuropsychiatry tests or their sub-elements differentiated GB patients from not GB patients. Results implicate that standardized measures of personality, mood, outlook, and beliefs about their healthcare do not differ between GB and not GB patients with epilepsy, possibly because generic brittleness is caused by factors that neuropsychiatry tests do not measure. CONCLUSIONS: We hypothesized that being GB may relate to having a personality or mindset that predisposes patients to attributing poor outcomes to a formulation switch. However, findings here in patients with epilepsy did not uncover neuropsychiatric factors that predict which patients were GB and which were not GB.

Considerations for the Forced Expiratory Volume in 1 Second-Based Comparative Clinical Endpoint Bioequivalence Studies for Orally Inhaled Drug Products.

Herein, we present the US Food and Drug Administration (FDA) Office of Research and Standards' current thinking, challenges, and opportunities for comparative clinical endpoint bioequivalence (BE) studies of orally inhaled drug products (OIDPs). Given the product-associated complexities of OIDPs, the FDA currently uses an aggregate weight-of-evidence approach to demonstrate that a generic OIDP is bioequivalent to its reference listed drug. The approach utilizes comparative clinical endpoint BE or pharmacodynamic BE studies, pharmacokinetic BE studies, and in vitro BE studies to demonstrate equivalence, in addition to formulation sameness and device similarity. For the comparative clinical endpoint BE studies, metrics based on forced expiratory volume in the first second (FEV1 ) are often the recommended clinical endpoints. However, the use of FEV1 can pose a challenge due to its large variability and a relatively flat dose-response relationship for most OIDPs. The utility of applying dose-scale analysis was also investigated by the FDA but often not recommended, due to either flat dose-response relationships or insufficient clinical study data. As a potential way to reduce sample size, we found adapting covariate analysis only explained a limited portion of the variation based on further investigation. The FDA continues to develop alternative methods to make BE assessment of OIDPs more cost- and time-efficient. Prospective generic drug applicants and academia are encouraged to participate in this effort by proposing new approaches in pre-abbreviated new drug application meeting requests and collaborating in the form of grants and contracts under the Generic Drug User Fee Amendments (GDUFA) Regulatory Science and Research Program.

In Vitro Matured Human Pluripotent Stem Cell-Derived Cardiomyocytes Form Grafts With Enhanced Structure and Function in Injured Hearts.

BACKGROUND: Human pluripotent stem cell (hPSC)-derived cardiomyocytes (hPSC-CMs) have tremendous promise for application in cardiac regeneration, but their translational potential is limited by an immature phenotype. We hypothesized that large-scale manufacturing of mature hPSC-CMs could be achieved through culture on polydimethylsiloxane (PDMS)-lined roller bottles and that the transplantation of these cells would mediate better structural and functional outcomes than with conventional immature hPSC-CM populations. METHODS: We comprehensively phenotyped hPSC-CMs after in vitro maturation for 20 and 40 days on either PDMS or standard tissue culture plastic substrates. All hPSC-CMs were generated from a transgenic hPSC line that stably expressed a voltage-sensitive fluorescent reporter to facilitate in vitro and in vivo electrophysiological studies, and cardiomyocyte populations were also analyzed in vitro by immunocytochemistry, ultrastructure and fluorescent calcium imaging, and bulk and single-cell transcriptomics. We next compared outcomes after the transplantation of these populations into a guinea pig model of myocardial infarction using end points including histology, optical mapping of graft- and host-derived action potentials, echocardiography, and telemetric electrocardiographic monitoring. RESULTS: We demonstrated the economic generation of >1×108 mature hPSC-CMs per PDMS-lined roller bottle. Compared with their counterparts generated on tissue culture plastic substrates, PDMS-matured hPSC-CMs exhibited increased cardiac gene expression and more mature structural and functional properties in vitro. More important, intracardiac grafts formed with PDMS-matured myocytes showed greatly enhanced structure and alignment, better host-graft electromechanical integration, less proarrhythmic behavior, and greater beneficial effects on contractile function. CONCLUSIONS: We describe practical methods for the scaled generation of mature hPSC-CMs and provide the first evidence that the transplantation of more mature cardiomyocytes yields better outcomes in vivo.

Analysis of verteporfin liposomal formulations for phospholipids and phospholipid degradation products by liquid chromatography-mass spectrometry (LC-MS).

Lipid composition and lipid degradation are critical to the stability of liposomal formulations which can impact the safety and efficacy of the drug. Herein we developed and validated an ultrahigh performance liquid chromatography coupled with quadrupole time of flight mass spectrometry (UPLC-QTOF-MS) method for determining phospholipid composition and phospholipid degradation products in a verteporfin liposomal formulation (Visudyne). The high mass accuracy (<5 ppm) of the QTOF method coupled with database searching (SimLipid) and comparison with known standards accurately identified and quantified the phospholipid compositions and lipid degradation products. The analysis of Visudyne indicated that more than 50% (w/w) of the total phospholipids are composed of phosphatidylcholine (PC) 14:0-14:0 and major phosphatidylglycerol (PG) species found are PG 16:0-18:2, PG 16:0-18:1, PG 18:0-18:2, and PG 18:0-18:1. The LC-MS method developed is capable of separating structural isomers such as PG 18:1-18:1 versus PG 18:0-18:2 and the separation of PG stereoisomers, such as PG 18:1-18:1 cis and PG 18:1-18:1 trans. The major lipid degradation products in Visudyne includes lysophosphatidylcholine and a few saturated and unsaturated lysophosphatidylglycerols, and free fatty acids (FFA). Each degradation product is less than 1% of the total phospholipids (w/w). In addition, the lipid profiles of naturally sourced egg PG from six different vendors were compared with the PG composition in Visudyne. Differences in lipid composition in egg PGs from different vendors were observed and the PG composition in Visudyne is matched with the lipid profile of the some of the egg PGs from different vendors. Drug developers can utilize this method to assess raw materials and lipid-based drug product quality and regulatory scientists can monitor the quality of the drug available in the market using this validated method.

Research and Education Needs for Complex Generics.

Complex generics are generic versions of drug products that generally have complex active ingredients, complex formulations, complex routes of delivery, complex dosage forms, are complex drug-device combination products, or have other characteristics that can make it complex to demonstrate bioequivalence or to develop as generics. These complex products (i.e. complex generics) are an important element of the United States (U.S.) Food and Drug Administration's (FDA's) Generic Drug User Fee Amendments (GDUFA) II Commitment Letter. The Center for Research on Complex Generics (CRCG) was formed by a grant from the FDA to address challenges associated with the development of complex generics. To understand these challenges, the CRCG conducted a "Survey of Scientific Challenges in the Development of Complex Generics". The three main areas of questioning were directed toward which (types of) complex products, which methods of analysis to support a demonstration of bioequivalence, and which educational topics the CRCG should prioritize. The survey was open to the public on a website maintained by the CRCG. Regarding complex products, the top three selections were complex injectables, formulations, and nanomaterials; drug-device combination products; and inhalation and nasal products. Regarding methods of analysis, the top three selections were locally-acting physiologically-based pharmacokinetic modeling; oral absorption models and bioequivalence; and data analytics and machine learning. Regarding educational topics, the top three selections were complex injectables, formulations, and nanomaterials; drug-device combination products; and data analytics, including quantitative methods and modeling & simulation. These survey results will help prioritize the CRCG's initial research and educational initiatives.

Challenges and opportunities in the development of complex generic long-acting injectable drug products.

Long-acting injectable (LAI) drug products enable the controlled release of a drug over an extended duration of time to improve the therapeutic effect, safety profile, or administration of an injectable product. The development of generic [505(j)] and differentiated [505(b)(2)] LAI products helps to provide patients and healthcare providers with more treatment options and to reduce overall healthcare costs, including those associated with drug product administration and patient compliance. In this review, we analyze the landscape of LAI products and identify the most common technical challenges that potential generic product entrants face. We focus on five formulation technologies that account for ~90% of approved LAI products, including those eligible for generic product registration over the next five years, to illustrate technology-specific challenges. We then review efforts from the U.S. Food and Drug Administration (FDA) to promote more generic product competition and emphasize the importance of collaboration among government, industry, and academia to advance the knowledge and capabilities of the scientific community. Regulatory bodies, industry, and academia are encouraged to anticipate challenges with emerging innovative LAI technologies and to leverage the experiences built on established technologies to foster generic product development.