RESUMEN
Numerous small biomolecules exist in the human body and play roles in various biological and pathological processes. Small molecules are believed not to induce intrafibrillar mineralization alone. They are required to work in synergy with noncollagenous proteins (NCPs) and their analogs, e.g. polyelectrolytes, for inducing intrafibrillar mineralization, as the polymer-induced liquid-like precursor (PILP) process has been well-documented. In this study, we demonstrate that small charged molecules alone, such as sodium tripolyphosphate, sodium citrate, and (3-aminopropyl) triethoxysilane, could directly mediate fibrillar mineralization. We propose that small charged molecules might be immobilized in collagen fibrils to form the polyelectrolyte-like collagen complex (PLCC) via hydrogen bonds. The PLCC could attract CaP precursors along with calcium and phosphate ions for inducing mineralization without any polyelectrolyte additives. The small charged molecule-mediated mineralization process was evidenced by Cryo-TEM, AFM, SEM, FTIR, ICP-OES, etc., as the PLCC exhibited both characteristic features of collagen fibrils and polyelectrolyte with increased charges, hydrophilicity, and density. This might hint at one mechanism of pathological biomineralization, especially for understanding the ectopic calcification process.
Asunto(s)
Citrato de Sodio , Citrato de Sodio/química , Citrato de Sodio/metabolismo , Animales , Humanos , Citratos/química , Colágeno/química , Colágeno/metabolismo , Calcinosis/metabolismo , Calcinosis/patología , Propilaminas/químicaRESUMEN
Starter cultures play a significant role in lipid hydrolysis, prevention of lipid oxidation, and synthesis of fatty acid in fermented sausage, enhancing product quality. In this study, five synergistic bacterial strains were used, including Pediococcus pentosaceus (B-3), Latilactobacillus sakei DLS-24 (D-24), Latilactobacillus acidophilus DLS-29 (D-29), Lactiplantibacillus pentosus (B-1), and Lactiplantibacillus plantarum (B-2). Sausage B1B3D24 gave the highest free fatty acid with 39.45 g/100 g at 45-Day. Based on 2-thiobarbituric acid reactive substance, B2B3 contains 112.68 MDA/kg. Lipoxygenase activity displays the lowest in B1B3D24 with 0.095 µmol/min·mg followed by B2B3 with 0.145 µmol/min·mg. B1B3D24 contains 11.35 g/kg of monounsaturated fatty acid with the highest content in eicosenoic acid (C20:1) and palmitoleic acid (C16:1). The fatty acid synthesis pathway in B1B3D24 contains an active positive interaction with PUFA to increase the isotopomers of ω-3 and ω-6 fatty acids. In addition, lipid mediating genes in B1B3D24 show the highest counts in fatty-acid synthase, carbonyl reductase 4, 3-oxoacyl-[acyl-carrier-protein] synthase III, hydroxysteroid 17-beta dehydrogenase 8, and acetyl-CoA carboxylase.
Asunto(s)
Ácidos Grasos , Fermentación , Productos de la Carne , Oxidación-Reducción , Productos de la Carne/análisis , Productos de la Carne/microbiología , Ácidos Grasos/metabolismo , Ácidos Grasos/química , Animales , Porcinos , Hidrólisis , Pediococcus pentosaceus/metabolismo , Pediococcus pentosaceus/genética , Proteínas Bacterianas/metabolismo , Proteínas Bacterianas/genética , Metabolismo de los LípidosRESUMEN
The timely degradation of tapetum, the innermost somatic anther cell layer in flowering plants, is critical for pollen development. Although several genes involved in tapetum development have been characterized, the molecular mechanisms underlying tapetum degeneration remain elusive. Here, we showed that mutation in Abnormal Degraded Tapetum 1 (ADT1) resulted in overaccumulation of Reactive Oxygen Species (ROS) and abnormal anther development, causing earlier tapetum Programmed Cell Death (PCD) and pollen abortion. ADT1 encodes a nuclear membrane localized protein, which is strongly expressed in the developing microspores and tapetal cells during early anther development. Moreover, ADT1 could interact with metallothionein MT2b, which was related to ROS scavenging and cell death regulation. These findings indicate that ADT1 is required for proper timing of tapetum PCD by regulating ROS homeostasis, expanding our understanding of the regulatory network of male reproductive development in rice.
Asunto(s)
Regulación de la Expresión Génica de las Plantas , Mutación , Oryza , Proteínas de Plantas , Polen , Especies Reactivas de Oxígeno , Oryza/genética , Oryza/crecimiento & desarrollo , Oryza/metabolismo , Polen/crecimiento & desarrollo , Polen/genética , Especies Reactivas de Oxígeno/metabolismo , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Muerte Celular , Flores/crecimiento & desarrollo , Flores/genética , ApoptosisRESUMEN
BACKGROUND: Widespread exposure to phthalates may raise the probability of various diseases. However, the association of phthalate metabolites with periodontitis remains unclear. METHODS: Totally 3402 participants from the National Health and Nutrition Examination Survey (NHANES) 2009 to 2014 cycles were enrolled in the cross-sectional investigation. We utilized weighted logistic regression to evaluate the association of ten phthalate metabolites with periodontitis. Restricted cubic spline analysis was applied to investigate potential nonlinear relationships. RESULTS: The weighted prevalence of periodontitis in the study was 42.37%. A one standard deviation (SD) rise in log-transformed levels of mono-2-ethyl-5-carboxypenty phthalate (MECPP), mono-n-butyl phthalate (MnBP), mono-(2-ethyl-5-hydroxyhexyl) phthalate (MEHHP), mono-isobutyl phthalate (MiBP), mono-(2-ethyl-5-oxohexyl) phthalate (MEOHP), and mono-benzyl phthalate (MBzP) was associated with higher odds of periodontitis, with odds ratios (95% confidence intervals) of 1.08 (1.02-1.14), 1.07 (1.02-1.11), 1.10 (1.05-1.15), 1.05 (1.01-1.09), 1.09 (1.04-1.14), and 1.08 (1.03-1.13), respectively. Individuals with the highest quartile concentrations of MECPP, MnBP, MEHHP, MEOHP, and MBzP were associated with 32%, 20%, 30%, 25%, and 26% increased odds of periodontitis, respectively, compared to those with the lowest quartile. Additionally, mono-(3-carboxypropyl) phthalate (MCPP) demonstrated an interesting inverted J-shaped relationship with periodontitis. CONCLUSIONS: The findings indicate an association of certain phthalate metabolites with periodontitis among US adults.
Asunto(s)
Encuestas Nutricionales , Periodontitis , Ácidos Ftálicos , Humanos , Ácidos Ftálicos/metabolismo , Femenino , Estudios Transversales , Masculino , Adulto , Periodontitis/epidemiología , Periodontitis/metabolismo , Persona de Mediana Edad , Estados Unidos/epidemiología , Prevalencia , Adulto JovenRESUMEN
RATIONALE: Dentinogenesis imperfecta (DI) is an autosomal-dominant disorder. The most common clinical manifestations, including obliterated tooth tissues and severe tooth wear, usually lead to tooth extractions. It remains a great challenge for dentists to preserve the residual tooth tissue and establish the esthetics and occlusion of dentitions. PATIENTS CONCERNS: 25-year-old twin sisters, who had suffered from dentinogenesis imperfecta type II for more than 10 years, presented with continuous tooth wear and discomfort from wearing a removable partial denture for more than 3 years. DIAGNOSIS: Intraoral examination showed extensive tooth wear with enamel exfoliation and typical amber-brown color with an opalescent discoloration. Their panoramic radiographs revealed completely obliterated tooth tissues and severe tooth wear. INTERVENTIONS AND OUTCOMES: The dentitions were restored with post-and-core crowns and pin lays after preparing root post paths and pin holes guided by computer-aided design/computer-aided manufacturing (CAD/CAM) procedures, resulting in a successful repair. LESSONS: Severe tooth wear and tooth tissue obliteration are typical clinical manifestations in DI-affected dentitions, increasing the complexity and difficulty in dental restorations. Early diagnosis and appropriate treatments are essential to achieve a favorable prognosis. CAD/CAM procedures, permitting accurate and effective treatment, possess promising potential in the treatment of DI-affected dentitions.
Asunto(s)
Dentinogénesis Imperfecta , Desgaste de los Dientes , Diente , Adulto , Humanos , Coronas , Dentinogénesis Imperfecta/rehabilitación , Rehabilitación Bucal , FemeninoRESUMEN
Ectopic eruption of the first permanent molars is a local eruption disturbance. The frequency of ectopically erupted first permanent molars is predominant in boys and primarily affects the maxilla. Interceptive treatment for irreversible ectopic eruptions should be initiated early to prevent space loss and the impaction of the second premolars. Herein, we report the case of a six-year-old girl with irreversible ectopic eruption of the bilateral mandibular first permanent molarstreated with a modified lingual arch. The mandibular first permanent molars were successfully distalised after six months of treatment, and one year of follow-up showed a satisfactory outcome. The modified lingual arch satisfies not only the clinical aspects of treatment but also the patient's well-being. However, the lingual arch may disturb tooth eruption in the mixed dentition stage.
Asunto(s)
Erupción Ectópica de Dientes , Niño , Femenino , Humanos , Dentición Mixta , Maxilar , Diente Molar/diagnóstico por imagen , Diente Molar/cirugía , Lengua , Erupción Dental , Erupción Ectópica de Dientes/diagnóstico por imagen , Erupción Ectópica de Dientes/terapia , Erupción Ectópica de Dientes/etiologíaRESUMEN
The leaf is the main site of photosynthesis and is an important component in shaping the ideal rice plant architecture. Research on leaf morphology and development will lay the foundation for high-yield rice breeding. In this study, we isolated and identified a novel curling leaf mutant, designated curling leaf 1 (cl1). The cl1 mutant exhibited an inward curling phenotype because of the defective development of sclerenchymatous cells on the abaxial side. Meanwhile, the cl1 mutant showed significant reductions in grain yield and thousand-grain weight due to abnormal leaf development. Through map-based cloning, we identified the CL1 gene, which encodes a MYB transcription factor that is highly expressed in leaves. Subcellular localization studies confirmed its typical nuclear localization. Transcriptome analysis revealed a significant differential expression of the genes involved in photosynthesis, leaf morphology, yield formation, and hormone metabolism in the cl1 mutant. Yeast two-hybrid assays demonstrated that CL1 interacts with alpha-tubulin protein SRS5 and AP2/ERF protein MFS. These findings provide theoretical foundations for further elucidating the mechanisms of CL1 in regulating leaf morphology and offer genetic resources for practical applications in high-yield rice breeding.
RESUMEN
Catalase (CAT) is an important antioxidant enzyme in plants that plays a key role in plant growth and stress responses. CAT is usually encoded by a small gene family that has been cloned and functionally studied in some species, such as Arabidopsis, wheat and cucumber, but its specific roles in rice are not clear at present. In this study, we identified three CAT family genes (OsCAT1, OsCAT2 and OsCAT3) in the rice genome and performed a systematic bioinformatics analysis. RT-PCR analysis revealed that OsCAT1-OsCAT3 was primarily expressed in vegetative tissues such as roots, stems and leaves. Since OsCAT3 showed the highest expression level among the three OsCAT genes, we then focused on its related functions. OsCAT3 prokaryotic expression protein has an obvious ability to remove H2O2. The OsCAT3crispr plant was short and had a low survival rate, the leaves were small with brown lesions, and the activities of the CAT, POD and SOD enzymes were significantly reduced. A microarray analysis showed that differentially expressed genes were primarily enriched in toxin metabolism and photosynthesis. This study laid a foundation for further understanding the function of the rice OsCAT gene.
Asunto(s)
Oryza , Catalasa/genética , Catalasa/metabolismo , Peróxido de Hidrógeno/metabolismo , Antioxidantes/metabolismo , FotosíntesisRESUMEN
This study sought to identify the midterm outcomes of one-stage hybrid aortic arch repair (HAAR) in patients with Stanford type A aortic dissection (TAAD). Between January 2010 and December 2015, 75 consecutive patients with TAAD involving the aortic arch who underwent one-stage type â ¡ HAAR at our institution were identified. During this period, 496 consecutive patients with TAAD underwent traditional total aortic arch replacement (TAR) with frozen elephant trunk. The preoperative, perioperative, and postoperative data of all patients were compared. A propensity score-matching analysis was applied to adjust for baseline risk factors. Five hundred and seventy-one patients were included for analysis (428 men; mean age, 48.9 ± 11.1 years). For all patients, the mean follow-up time was 41.1 ± 22.1 months, in-hospital mortality was 4.7%, and the 5-year survival rate was 89.5%. Midterm outcomes between the propensity-matched groups were compared (59 HAAR vs TAR pairs). HAAR group showed shorter cardiopulmonary bypass time (105-159 minutes vs 158-230 minutes, P < 0.001), aortic cross-clamping time, postoperative ventilation time, and intensive care unit stays (33-108 hours vs 45-131 hours, P = 0.010) than the TAR group. There were no significant differences in in-hospital mortality, rate of stroke and rate of paraplegia between the 2 groups, however, better 5-year survival rate was found in HAAR group (94.9% vs 75.8%, Log-rank P = 0.005). As compared to propensity matched cohort of TAR patients, HAAR shows good midterm outcomes for patients with TAAD. Further randomized study was needed to clarify the optimal management strategy of TAAD.
Asunto(s)
Aneurisma de la Aorta Torácica , Disección Aórtica , Implantación de Prótesis Vascular , Adulto , Humanos , Masculino , Persona de Mediana Edad , Aorta/cirugía , Aorta Torácica/diagnóstico por imagen , Aorta Torácica/cirugía , Aneurisma de la Aorta Torácica/diagnóstico por imagen , Aneurisma de la Aorta Torácica/cirugía , Aneurisma de la Aorta Torácica/etiología , Disección Aórtica/diagnóstico por imagen , Disección Aórtica/cirugía , Implantación de Prótesis Vascular/efectos adversos , Estudios Retrospectivos , Resultado del TratamientoRESUMEN
By combining angle-resolved photoemission spectroscopy, scanning tunneling microscopy, atomic force microscope based piezoresponse force microscopy and first-principles calculations, we have studied the low-energy band structure, atomic structure, and charge polarization on the surface of a topological semimetal candidate TaNiTe_{5}. Dirac-like surface states were observed on the (010) surface by angle-resolved photoemission spectroscopy, consistent with the first-principles calculations. On the other hand, piezoresponse force microscopy reveals a switchable ferroelectriclike polarization on the same surface. We propose that the noncentrosymmetric surface relaxation observed by scanning tunneling microscopy could be the origin of the observed ferroelectriclike state in this novel material. Our findings provide a new platform with the coexistence of a ferroelectriclike surface charge distribution and novel surface states.
RESUMEN
To further understand the molecular mechanism for rice male reproduction, a rice male sterile mutant paa1 was screened from the rice mutant library generated by treatment with 60Coγ-rays. Genetic analysis revealed that paa1 is controlled by a single- recessive nuclear gene, and the anthers of the paa1 mutant were smaller than those of WT plants with a white color. Histological analysis demonstrated that the anthers of the paa1 mutant began to turn abnormal at the microspore stage after meiosis, with abnormal degradation of tapetum, deformed Ubisch bodies, and defective pollen exine. TUNEL assay results also confirmed the delay of tapetum PCD in paa1. Map-based cloning was performed for the PAA1 location. As a result, PAA1 was located in a 88-kb region at the end of chromosome 10, which comprises a total of seven candidate genes, and no genes related to anther development have been reported in this region. The results indicate that PAA1 is an essential gene in regulating tapetum development and pollen/microspore formation after rice meiosis.
Asunto(s)
Regulación de la Expresión Génica de las Plantas , Oryza , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Polen/genética , Polen/metabolismo , Meiosis/genética , Flores/genéticaRESUMEN
Aims: We describe a new aortic arch dissection (AcD) classification, which we have called the Fuwai classification. We then compare the clinical characteristics and long-term prognoses of different classifications. Methods: All AcD patients who underwent surgical procedures at Fuwai Hospital from 2010 to 2015 were included in the study. AcD procedures are divided into three types: Fuwai type Cp, Ct, and Cd. Type Cp is defined as the innominate artery or combined with the left carotid artery involved. Type Cd is defined as the left subclavian artery or combined with the left carotid artery involved. All other AcD surgeries are defined as type Ct. The Chi-square test was adopted for the pairwise comparison among the three types. Kaplan-Meier was used for the analysis of long-term survival and survival free of reoperation. Results: In total, 1,063 AcD patients were enrolled from 2010 to 2015: 54 patients were type Cp, 832 were type Ct, and 177 were type Cd. The highest operation proportion of Cp, Ct and Cd were partial arch replacement, total arch replacement, and TEVAR. The surgical mortality in type Ct was higher compared to type Cd (Ct vs. Cd = 9.38 vs. 1.69%, p < 0.01) and type Cp (Ct vs. Cp = 9.38 vs. 1.85%, p = 0.06). There was no difference in surgical mortality of type Cp and Cd (p = 0.93). There were no significant differences in the long-term survival rates (p = 0.38) and free of aorta-related re-operations (p = 0.19). Conclusion: The Fuwai classification is used to distinguish different AcDs. Different AcDs have different surgical mortality and use different operation methods, but they have similar long-term results.
RESUMEN
Background: This study employed three surgical techniques: total arch replacement (TAR) with frozen elephant trunk (FET), aortic balloon occlusion technique (ABO) and hybrid aortic arch repair (HAR) on patients with type I aortic dissection in Fuwai Hospital, aiming to compare the early outcomes of these surgical armamentariums. Methods: From January 2016 to December 2018, an overall 633 patients (431 of TAR+FET, 122 of HAR, and 80 of ABO) with type I aortic dissection were included in the study. Thirty-day mortality, stroke, paraplegia, re-exploration for bleeding, and renal replacement therapy were compared using the matching weight method (MWM). Results: After MWM process, the baseline characteristics were comparable among three TAR groups. It showed that ABO group had the longest cardiopulmonary bypass (p < 0.001) and aortic cross-clamp time (p < 0.001), while the operation time was longest in the HAR group (p = 0.039). There was no significant difference in 30-day mortality among groups (p = 0.783). Furthermore, the incidence of stroke (p = 0.679), paraplegia (p = 0.104), re-exploration for bleeding (p = 0.313), and CRRT (p = 0.834) demonstrated no significant difference. Of note, no significant differences were found regarding these outcomes even before using MWM. Conclusions: Based on the early outcomes, the three TAR approaches were equally applicable to type I aortic dissection. We may choose the specific procedure relatively flexibly according to patient status and surgeon's expertise. Importantly, long-term investigations are warranted to determine whether above approaches remain to be of equivalent efficacy and safety.
RESUMEN
OBJECTIVE: This study investigated the effects of prime-and-rinse approach using 10-methacryloyloxydecyl dihydrogen phosphate (MDP) micellar solutions on extrafibrillar demineralization and dentin bond performance of etch-and-rinse adhesive. METHODS: The micellar solutions were prepared by adding 15% MDP in two ethanol-aqueous (75:25, 55:45 V/V%) solutions, referring to MDP/EtOH75 and MDP/EtOH55. After mid-coronal dentin surfaces were either etched (control) or conditioned with MDP/EtOH75 and MDP/EtOH55 and rinsed, they were applied with adhesive (Adpter Single Bond 2) in dry- or wet-bonding mode and placed with composite resin (Filtek Z350 XT). They were prepared into multiple micro-beams for micro-tensile bond strengths (MTBS) testing after storage in water for 24 h or subjecting to thermocycling. The other pretreated dentin surfaces were analyzed by TF-XRD, ATR-FTIR, HRTEM, FE-SEM, contact angle measurement and nanoindentation testing. The MTBS data was analyzed with two-way ANOVA followed by LSD post-hoc test. RESULTS: MDP/EtOH75 produced significantly greater MTBS values than MDP/EtOH55 and control after thermocycling aging in dry- or wet-bonding mode (P < 0.05). The ATR-FTIR spectrums shows that ratios of phosphate/monomer (1,034 cm-1/1,716 cm-1) on MDP/EtOH75-, MDP/EtOH55-treated dentin surfaces are 0.51 and 0.23, respectively. This is confirmed by HRTEM images and SAED pattern that intrafibrillar minerals were mostly preserved after treatment with MDP/EtOH75. MDP/EtOH75 produced significantly higher elastic modulus and nanohardness on pretreated dentin surface than MDP/EtOH55 (P < 0.05). TF-XRD pattern shows some MDP-Ca salts remained on the primed dentin surface. SIGNIFICANCE: Prime-and-rinse approach using MDP/EtOH75 micellar solution could produce mostly extrafibrillar demineralization, and greatly increase dentin bond durability in dry- or wet-bonding mode.
Asunto(s)
Recubrimiento Dental Adhesivo , Desmineralización Dental , Cementos Dentales , Dentina , Recubrimientos Dentinarios , Humanos , Ensayo de Materiales , Metacrilatos , Micelas , Cementos de Resina , Resistencia a la TracciónRESUMEN
Properly cutting graphene into certain high-quality micro-/nanoscale structures in a cost-effective way has a critical role. Here, we report a novel approach to pattern graphene films by H2O-based magnetic-assisted ultraviolet (UV) photolysis under irradiation at 184.9 nm. By virtue of the paramagnetic characteristic, the photo-dissociated hydroxyl [OH(X2Π)] radicals are magnetized and have their oxidation capability highly enhanced through converting into an accelerated directional motion. Meanwhile, the precursor of H2O(XÌ1A1) molecules distributes uniformly thanks to its weak diamagnetic characteristic, and there exists no instable diamagnetic intermediate to cause lateral oxidation. Possessing these unique traits, the H2O-based magnetic-assisted UV photolysis has the capability of making graphene microscale patterns with the linewidth down to 8.5 µm under a copper grid shadow mask. Furthermore, it is feasible to pattern graphene films into 40 nm-wide ribbons under ZnO nanowires and realize hybrid graphene/ZnO nanoribbon field-effect transistors with a hole mobility up to 7200 cm2·V-1·s-1. The X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry analyses reveal that OH(X2Π) radicals act as a strong oxidant and that another product of H(12S) adsorbs weakly on graphene.
RESUMEN
We propose and demonstrate a novel scheme to produce ultrashort and ultrastable MeV electron beam. In this scheme, the electron beam produced in a photocathode radio frequency (rf) gun first expands under its own Coulomb force with which a positive energy chirp is imprinted in the beam longitudinal phase space. The beam is then sent through a double bend achromat with positive longitudinal dispersion where electrons at the bunch tail with lower energies follow shorter paths and thus catch up with the bunch head, leading to longitudinal bunch compression. We show that with optimized parameter sets, the whole beam path from the electron source to the compression point can be made isochronous such that the time of flight for the electron beam is immune to the fluctuations of rf amplitude. With a laser-driven THz deflector, the bunch length and arrival time jitter for a 20 fC beam after bunch compression are measured to be about 29 fs (FWHM) and 22 fs (FWHM), respectively. Such an ultrashort and ultrastable electron beam allows us to achieve 50 femtosecond (FWHM) resolution in MeV ultrafast electron diffraction where lattice oscillation at 2.6 THz corresponding to Bismuth A_{1g} mode is clearly observed without correcting both the short-term timing jitter and long-term timing drift. Furthermore, oscillating weak diffuse scattering signal related to phonon coupling and decay is also clearly resolved thanks to the improved temporal resolution and increased electron flux. We expect that this technique will have a strong impact in emerging ultrashort electron beam based facilities and applications.
RESUMEN
BACKGROUND: To evaluate whether the heated humidified ventilation can effectively maintain core temperature and improve prognosis in normothermic thoraco-abdominal aortic aneurysm repair surgery. METHODS: Patients who were scheduled for normothermic thoraco-abdominal aortic aneurysm repair surgery were randomized into the group using heated humidified ventilation combined with water blanket and the group using water blanket only. During the operation, the core temperature will be measured every 30 minutes. We analyzed intraoperative core-temperature, coagulation function and in-hospital mortality. RESULTS: HHV&WB group showed lesser decrease in core temperature than WB groups in the first two hours, while WB group had a higher body temperature at the third to fifth hour (2-hour: 35.45±0.47 vs. 35.24±0.59 °C, P=0.284; 5-hour: 35.38±0.70 vs. 35.51±0.88 °C, P=0.664). There was less blood loss, dosage of coagulation drugs and in-hospital mortality (13.33% vs. 20.00%, P=1) in the HHV&WB group. CONCLUSIONS: Heated humidified ventilation can improve the prognosis of normothermic thoraco-abdominal aortic aneurysm repair surgery to some extent, but it can only maintain the core temperature during the first 2 hours.
RESUMEN
The present study investigated the effects of varying concentrations of sodium butyrate (SB) on fat accumulation and cell proliferation in chicken adipocytes. High and low serial concentrations of SB used significantly reduced adipocytic fat accumulation. However, they were observed to exhibit differences in cell morphology and distinctions in lipogenic genes expression profiles. At lower concentration (0.01 mM), fat accumulation was decreased with an associated downregulation in the expression of lipogenic genes, which was mediated by free fatty acid receptors (FFARs). Contarily, at higher concentration (1 mM), the fat droplets laden in adipocytes were enlarged, and this was accompanied with activation of lipogenic genes expression. However, the total accumulated fat was also decreased largely due to reduction in cell numbers, which was partially attributable to the reduction in histone deacetylase (HDAC) activity. Animal experiments further indicated that dietary supplementation of lower dose coated SB (0.1% wt/wt) inhibited fat deposition in livers and abdominal fat tissues of broilers, suggesting the potential application of sodium butyrate as feed additive in the regulation of fat deposition.
Asunto(s)
Adipocitos/efectos de los fármacos , Ácido Butírico/farmacología , Grasas/antagonistas & inhibidores , Adipocitos/metabolismo , Animales , Proliferación Celular/efectos de los fármacos , Células Cultivadas , Pollos , Relación Dosis-Respuesta a Droga , Grasas/metabolismoRESUMEN
OBJECTIVES: The study investigated the effects of novel prime-&-rinse mode using MDP (10-methacryloyloxydecyl dihydrogenphosphate) and matrix metalloproteinase (MMPs) inhibitors on dentin microtensile bond strengths (MTBS) of self-etch adhesive, resin-dentin interface degradations, and activity of recombinant human (rh) MMP-8, -9. MATERIALS AND METHODS: Eight experimental primers were prepared using 5% and 15% of MDP ethanol-aqueous (1:1) solution in combination with/without MMPs inhibitors (1%benzalkonium chloride (BAC), 1000 µm/mL polyvinylphosphonic acid (PVPA) and 15%proanthocyanidin (PA)). Ninety human mid-coronal dentin surfaces were applied with the experimental primers, water-sprayed and gently air-dried (prime-&-rinse mode), or not (control, self-etch mode). The specimens were bonded with self-etch adhesive (Clearfil S3 Bond) and composite resin (Clearfil Majesty). The resin-bonded specimens were prepared into multiple micro-beams for MTBS tests after 24 h and 1 yr of water storage. The resin-dentin interfaces were analyzed with SEM/TEM. The inhibitory effects of eight primers on rhMMP-8, 9 were determined. The data were analyzed using two-way ANOVA and LSD multiple comparisons tests. RESULTS: Compared with control, all the primers used in prime-&-rinse mode could significantly improve long-term dentin MTBS (P < 0.05), while 5%MDP-BAC, 15%MDP and 15%MDP+MMPs inhibitors could significantly increase the short-term dentin MTBS (P < 0.05). The SEM/TEM findings revealed that the resin-dentin interfaces were stable over time when the prime-&-rinse mode used. Eight primers possessed the high inhibitory ratio of rh MMP-8, 9. CONCLUSIONS: The novel prime-&-rinse mode using 5%MDP-BAC, 15%MDP and 15%MDP+MMPs inhibitors could significantly increase the short- and long-term dentin MTBS of self-etch adhesive. This might be a supplement to contemporary dentin bonding strategies.
Asunto(s)
Adhesivos , Recubrimiento Dental Adhesivo , Dentina , Recubrimientos Dentinarios , Humanos , Ensayo de Materiales , Inhibidores de la Metaloproteinasa de la Matriz/farmacología , Microscopía Electrónica de Rastreo , Cementos de Resina , Propiedades de Superficie , Resistencia a la TracciónRESUMEN
Revealing the initial oxidation behavior of single crystal superalloys is significant for a better understanding of the oxidation mechanism of turbine blades during service condition. The purpose of current research was to observe the initial oxidation of a single crystal superalloy. In-situ oxidation experiment during only thermal exposure and thermal-stress pattern were carried out. The mechanism of nucleation and growth of oxide scale was discussed. Results showed that the oxide on the interface of γ/γ' phase was constituted of Al2O3 precipitates and formed by external diffusion of Al atoms or ions. Loading stress enhanced the diffusion of Al atom causing high oxidation rate. A logarithmic model was proposed and fitted well with the oxidation process.