Insight into oil-water interfacial adsorption of protein particles towards regulating Pickering emulsions: A review.

Over the past decade, Pickering emulsions (PEs) stabilized by protein particles have been the focus of researches. The characteristics of protein particles at the oil-water interface are crucial for stabilizing PEs. The unique adsorption behaviors of protein particles and various modification methods enable oil-water interface to exhibit controllable regulation strategies. However, from the perspective of the interface, studies on the regulation of PEs by the adsorption behaviors of protein particles at oil-water interface are limited. Therefore, this review provides an in-depth study on oil-water interfacial adsorption of protein particles and their regulation on PEs. Specifically, the formation of interfacial layer and effects of their interfacial characteristics on PEs stabilized by protein particles are elaborated. Particularly, complicated behaviors, including adsorption, arrangement and deformation of protein particles at the oil-water interface are the premise of affecting the formation of interfacial layer. Moreover, the particle size, surface charge, shape and wettability greatly affect interfacial adsorption behaviors of protein particles. Importantly, stabilities of protein particles-based PEs also depend on properties of interfacial layers, including interfacial layer thickness and interfacial rheology. This review provides useful insights for the development of PEs stabilized by protein particles based on interfacial design.

Exploring the role of γ-Oryzanol on stabilization mechanism of Pickering emulsion gels loaded by α-Lactalbumin or ß-Lactoglobulin via multiscale approaches.

The research explored the role of γ-oryzanol (γs) on stabilization behavior of Pickering emulsion gels (PEGs) loaded by α-lactalbumin (α-LA) or ß-lactoglobulin (ß-LG), being analyzed by experimental and computer methods (molecular dynamic simulation, MD). Primarily, the average particle size of ß-LG-γS was expressed 100.07% decrease over that of α-LA-γS. In addition, γs decreased the dynamic interfacial tension of two proteins with the order of ß-LG < α-LA. Meanwhile, quartz crystal microbalance with dissipation proved that ß-LG-γS exhibited higher adsorption mass and denser rigid interface layer than α-LA-γS. Moreover, the hydrophobic group of γS had electrostatic repulsion with polar water molecules in the aqueous phase, which spread to the oil phase. ß-LG-γS had lower RMSD/Rg value and narrower fluctuation compared with α-LA-γS. This work strength the exploration of interfacial stabilization mechanism of whey protein-based PEGs, which enriched its theoretical research for industrial-scale production as the replacement of trans fat and cholesterol.

Non-thermal techniques as an approach to modify the structure of milk proteins and improve their functionalities: a review of novel preparation.

BACKGROUND: Milk proteins (MPs) have been widely used in the food industry due to their excellent functionalities. However, MPs are thermal-unstable substances and their functional properties are easily affected by heat treatment. Emerging non-thermal approaches (i.e., high-pressure homogenization (HPH), ultrasound (US), pulsed electric field (PEF)) have been increasingly popular. A detailed understanding of these approaches' impacts on the structure and functionalities of MPs can provide theoretical guidance for further development to accelerate their industrialization. SCOPE AND APPROACH: This review assesses the mechanisms of HPH, US and PEF technologies on the structure and functionalities of MPs from molecular, mesoscopic and macroscopic levels, elucidates the modifications of MPs by these theologies combined with other methods, and further discusses their existing issues and the development in the food filed. KEY FINDINGS AND CONCLUSIONS: The structure of MPs changed after HPH, US and PEF treatment, affecting their functionalities. The changes in these properties of MPs are related to treated-parameters of used-technologies, the concentration of MPs, as well as molecular properties. Additionally, these technologies combined with other methods could obtain some outstanding functional properties for MPs. If properly managed, these theologies can be tailored for manufacturing superior functional MPs for various processing fields.

Extrusion of casein and whey protein isolate enhances anti-hardening and performance in high-protein nutrition bars.

Model high-protein nutrition bars (HPNBs) were formulated by incorporating whey protein isolate (WPI) and casein (CN) at various extrusion temperatures (50, 75, 100, 125, and 150 °C) with a protein content of 45 g per 100 g. The free sulfhydryl groups, amino groups, hardness, and microstructures of HPNBs were analyzed periodically at 37 °C over a storage period of 45 days. Specifically, sulfhydryl group, amino group and surface hydrophobicity of extruded whey protein isolate (WPE) and extruded casein (CE) were significantly reduced (P < 0.05) compared to those of unextruded protein. HPNBs formulated with WPE (HWPE) and CE (HWCE) exhibited a slower hardening rate compared to those formulated with unmodified protein. Moreover, the color difference, hardness and sensory score of HPNBs after 45 days of storage were used as indicators, and the results of the TOPSIS multiple index analysis indicated that HPNB formulated with WPI extruded at 150 °C possessed the best quality characteristics.

Evaluating the role of glycyrrhizic acid on the dynamic stabilization mechanism of the emulsion prepared by α-Lactalbumin: Experimental and silico approaches.

The role of glycyrrhizic acid (GA) on the dynamic stabilization mechanism of the α-Lactalbumin (α-La) emulsion was evaluated in this study. Smaller particle size and higher zeta potential value were observed in the α-La/GA emulsion as compared to the α-La emulsion. Ultra-high-resolution microscopy revealed that the interfacial film formed around oil droplets by α-La/GA complex was thicker compared to that of either α-La or GA. The appearance of a new peak at 1679 cm-1 in FTIR of the α-La/GA emulsion attributed to the stretching vibration of CO, providing evidence of the formation of a stable emulsion system. The results from dynamic molecular simulation showed GA induced the formation of an interfacial adsorption layer at the oil-water interface, reducing the migration ability of GA. The findings indicate that the presence of GA in the α-La emulsion effectively enhances its stability, highlighting its potential as a valuable emulsifying agent for various industrial applications.

Comparative Analysis of Fecal Microbiota in Vegetarians and Omnivores.

Diet has a significant impact on fecal microbiota, which in turn plays an important role in human health. To evaluate the impact of dietary habits on fecal microbiota, we investigated the fecal microbial composition in vegetarians and omnivores using 16S rRNA gene sequencing, and estimated the correlation between fecal microbiota, body mass and diet. The dietary data showed that vegetarians consumed more plant-based foods rich in dietary fiber, omnivores consumed more animal-based foods rich in fat and overweight and obese people consumed more high-energy foods. Compared to omnivores, vegetarians had greater richness and diversity in their fecal microbiota. The Firmicutes/Bacteroidetes ratio was lower and the Prevotella/Bacteroides ratio was higher in vegetarians. The meat intake correlated positively with the proportion of Bacteroides and negatively with the proportion of Prevotella. The composition and diversity in fecal microbiota in the normal weight group, overweight group and obesity group were similar to that of vegetarians and omnivores, respectively. This paper revealed the distinctive characteristics of fecal microbiota in vegetarians and omnivores. The omnivorous diet contained more fat, which reduced the fecal microbial diversity, and was more likely to lead to being overweight or obese.

Protective Effect of Polyphenols, Protein, Peptides, and Polysaccharides on Alcoholic Liver Disease: A Review of Research Status and Molecular Mechanisms.

Alcoholic liver disease (ALD) has emerged as an important public health problem in the world. The polyphenols, protein, peptides, and polysaccharides have attracted attention for prevention or treatment of ALD. Therefore, this paper reviews the pathogenesis of ALD, the relationship between polyphenols, peptides, polysaccharides, and ALD, and expounds the mechanism of gut microbiota on protecting ALD. It is mainly found that the hydroxyl group of polyphenols endows it with antioxidation to protect ALD. The ALD protection of bioactive peptides is related to amino acid composition. The ALD protection of polysaccharides is related to the primary structure. Meanwhile, polyphenols, protein, peptides, and polysaccharides prevent or treat ALD by antioxidation, anti-inflammatory, antiapoptosis, lipid metabolism, and gut microbiota regulation. This contribution provides updated information on polyphenols, protein, peptides, and polysaccharides in response to ALD, which will not only facilitate the development of novel bioactive components but also the future application of functional food raw materials will be promoted.

Physical treatment synergized with natural surfactant for improving gas-water interfacial behavior and foam characteristics of α-lactalbumin.

The purpose of this study was to investigate effect of physical treatment (ultrasound, U/high pressure homogenization, H/combined treatment, UH or HU) and surfactant (Mogroside V, Mog) on air/water interface adsorption and foaming properties of α-lactalbumin (ALa). Firstly, the binding of Mog and all physical-treated ALa was a static quenching process. Mog had the greatest binding affinity for HU-ALa among all treated samples. U or H treatment could change surface hydrophobicity of ALa/Mog complex. Secondly, at the molar ratio (ALa:Mog) of 1:50, foaming ability (FA) of all ALa samples got the maximum. The sequence of FA in ALa and ALa/Mog complex was listed as follow: HU > U > H > UH. Moreover, foaming stability (FS) of HU-ALa was the highest, followed by H-ALa, U-ALa and UH-ALa. Meanwhile, low concentration Mog increased FS of ALa or UH-ALa, but it reduced FS of H-ALa, U-ALa and HU-ALa. Quartz crystal microbalance with dissipation monitoring (QCM-D) experiment indicated that ALa/Mog complex after U or H treatment was quickly absorbed at air/water interface, compared with the treated ALa, and HU-ALa/Mog had the largest frequency shift. In addition, HU-ALa had the thickest bubble membrane and the highest dissipation shift in all samples, indicating that the absorbed membrane thickness and viscoelasticity of samples was correlated with foam stability. Therefore, U and H treatment synergism with Mog was an effective approach to enhance foam properties of ALa, which indicated that HU-treated ALa/Mog complex could be viewed as the safe and efficient foaming agent applied in food processing.

Enhanced viability of probiotics encapsulated within synthetic/natural biopolymers by the addition of gum arabic via electrohydrodynamic processing.

To enhance the probiotics' viability, novel vehicles consisting of synthetic/natural biopolymers, i.e., polyvinyl alcohol (PVOH), polyvinylpyrrolidone, whey protein concentrate and maltodextrin, encapsulated with L. plantarum KLDS 1.0328 and gum arabic (GA) as a prebiotic were fabricated by electrohydrodynamic techniques. Inclusion of cells into composites caused an increase in conductivity and viscosity. Morphological analysis showed that cells were distributed along the electrospun nanofibres or distributed randomly in the electrosprayed microcapsules. Both intramolecular and intermolecular hydrogen bond interactions exist between biopolymers and cells. Thermal analysis revealed that the degradation temperatures (>300 °C) of various encapsulation systems have potential applications in heat-treatment foods. Additionally, cells especially immobilized in PVOH/GA electrospun nanofibres showed the highest viability compared with free cells after exposure to simulated gastrointestinal stress. Furthermore, cells retained their antimicrobial ability after rehydration of the composite matrices. Therefore, electrohydrodynamic techniques have great potential in encapsulating probiotics.

Oil body extraction from high-fat and high-protein soybeans by laccase cross-linked beet pectin: physicochemical and oxidation properties.

BACKGROUND: Soybean oil bodies (SOB) are droplets of natural emulsified oil. Soybean oil emulsifies well but it is easily oxidized during storage. Beet pectin is a complex anionic polysaccharide, which can be adsorbed on the surface of liposomes to improve their resistance to flocculation. Laccase can covalently cross-link ferulic acid in beet pectin, and its structure is irreversible, which can improve the stability of polysaccharides. RESULTS: At pH 2.5, laccase cross-linked beet pectin high-oil soybean oil body (HOSOB) and high-protein soybean oil body (HPSOB) emulsions showed obvious aggregation and severe stratification, and the oxidation of the emulsions was also high. The flocculation of emulsions decreased with an increase in the pH. The effect of pH on the flocculation of emulsion was confirmed by confocal laser electron microscopy. The ζ potential, emulsification, and rheological shear force increased with increasing pH whereas the particle size and surface hydrophobicity decreased with increasing pH. CONCLUSION: This experiment indicates that the physicochemical stability of the two composite emulsions was strongly affected under acidic conditions but stable under neutral and weakly alkaline conditions. Under the same acid-base conditions, the degree of oxidation of HPSOB composite emulsion changes substantially. The results of this study can provide a basis for the design of very stable emulsions to meet the demand for natural products. © 2023 Society of Chemical Industry.

Four Different Structural Dietary Polyphenols, Especially Dihydromyricetin, Possess Superior Protective Effect on Ethanol-Induced ICE-6 and AML-12 Cytotoxicity: The Role of CYP2E1 and Keap1-Nrf2 Pathways.

Polyphenols have received attention as dietary supplements for the relief of alcoholic liver disease (ALD) due to various bioactivities. Ethanol-induced rat small intestinal epithelial cell 6 (IEC-6) and alpha mouse liver 12 (AML-12) cell models were pretreated with four dietary polyphenols with different structures to explore their effects on cytotoxicity and potential protective mechanisms. The results showed that polyphenols had potential functions to inhibit ethanol-induced AML-12 and IEC-6 cell damage and oxidative stress, and restore ethanol-induced IEC-6 permeability and tight junction gene expression. Especially, dihydromyricetin (DMY) had the best protective effect on ethanol-induced cytotoxicity, followed by apigenin (API). Western blot results showed that DMY and API had the best ability to inhibit CYP2E1 and Keap1, and promote nuclear translocation of Nrf2, which might be the potential mechanism by which DMY and API attenuate ethanol-induced cytotoxicity. Moreover, the molecular docking results predicted that DMY and API could bind more tightly to the amino acid residues of CYP2E1 and Keap1, which might be one of the inhibitory modes of dietary polyphenols on CYP2E1 and Keap1. This study provided a rationale for the subsequent protective effect of dietary polyphenols on alcohol-induced liver injury in animal models and provided new clues on bioactive components for ALD-protection based on the gut-liver axis.

Modification of fermented whey protein concentrates: Impact of sequential ultrasound and TGase cross-linking.

This study aimed to examine the impact of fermentation process on whey protein and improve the general properties of fermented whey protein concentrate (FWPC) recovered by a combined ultrafiltration-diafiltration (UF-DF) operation. Impacts of sequential ultrasound (US) pretreatment and transglutaminase (TGase) crosslinking on structural, functional, and physicochemical properties of FWPCs were investigated. Partially denatured and hydrolyzed fermented whey protein could replace heat denaturation prior to the TGase addition to a whey protein system. Sequential treatment increased the molecular weight of FWPCs as exhibited by both SEM and SDS-PAGE, which demonstrates that modification can lead to the polymers and oligomers production. The zeta potential value increased significantly after US treatment and enzyme catalysis, and all the modified FWPCs were strongly negatively charged. Compared with the secondary structure of untreated FWPCs, the percentage of α-helix and random coil in modified FWPCs significantly increased, while the percentage of ß-sheet and ß-turns reduced. Solubility, free sulfhydryl groups, and surface hydrophobicity of all FWPCs were significantly improved compared to non-fermented WPC (P < 0.05). Sequential treatment induced a substantial impact on the emulsifying activity and stability of modified samples in comparison with untreated FWPCs. Scanning electron microscope pictures confirmed the positive effects of sequential treatments on texture and void size reduction. Therefore, the application of recovering modified FWPCs is fully recommended as a commercially viable approach for enhanced protein production at the industrial scale.

Lactitol and ß-cyclodextrin alleviate the intensity of goaty flavor.

BACKGROUND: Goat milk has balanced nutritional composition, is conducive to digestion and absorption, and does not easily lead to allergic reactions. However, the special goaty flavor in milk has seriously affected consumer acceptance. It is imperative to alleviate the goaty flavor in a safe and efficient way. RESULTS: This study indicated that the supplementation of 6 g kg-1 ß-cyclodextrin or 8 g kg-1 lactitol in goat milk significantly alleviated goaty flavor and improved sensory characteristics. Furthermore, the supplementation of ß-cyclodextrin and lactitol had a synergistic effect in reducing the content of free fatty acids that cause goaty flavor. The content of caproic acid (C6 H12 O2 ), octanoic acid (C8 H6 O2 ), and decanoic acid (C10 H20 O2 ) decreased by 42.46%, 39.45%, and 46.41%, respectively, after a combined group was supplemented with 6 g kg-1 ß-cyclodextrin and 7 g kg-1 lactitol, which was significantly lower than in groups given ß-cyclodextrin or lactitol individually. CONCLUSION: This study provides a novel and effective approach to alleviate goaty flavor and promote the competitiveness of goat milk products. © 2022 Society of Chemical Industry.

Structure and rheological properties of extruded whey protein isolate: Impact of inulin.

Impacts of inulin addition (0, 5, 10, 15 %) on structure, functional and rheological properties of whey protein isolate (WPI) after extrusion pretreatment (E-WPI) were investigated. The results proved that after adding 15 % inulin, water holding capacity of gels, emulsifying activity, emulsion stability, foaming ability and foaming stability of E-WPI were the best and increased by 24.38 %, 7.43 %, 12.35 %, 162.97 % and 41.31 %, compared with those of unextruded WPI, respectively. Rheology analysis showed that apparent viscosity and consistency index of all the samples after inulin addition were enhanced and exhibited pseudoplastic fluids. FTIR spectroscopy indicated that E-WPI/WPI and inulin was linked together due to hydrogen bonds and addition of inulin increased the proportion of their ß-turn structure. These findings demonstrated that the addition of inulin in combination with extrusion pretreatment could jointly improve the functional properties of WPI. Therefore, E-WPI with the addition of inulin shows potential commercial applications in the production of novel food foaming agents and emulsifiers.

Synergism of selective thermal denaturation and glycosylation improves quality characteristics of green soybean tofu.

BACKGROUND: Tofu is rich in nutrients and contains high-quality protein. However, commercial tofu products usually have weak gel strength and low water holding capacity (WHC). In the present study, the effects of selective thermal denaturation (STD) time (0-20 min, 5-min interval; 85 °C) and glycosylation (100 °C; 0, 10 and 20 g kg-1 glucose) on the quality characteristics of green soybean tofu were studied through by the evaluation method of the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) model for the best synergism condition of STD and glycosylation. RESULTS: Compared to STD or glycosylation, combination treatment of STD and glycosylation improved hardness, WHC, yield, protein and fat contents of green soybean tofu. Furthermore, the gel strength, WHC, yield, protein and fat contents of tofu was increased by 135.21%, 20.18%, 12.21%, 24.91%, 44.15% compared to untreated tofu. Meanwhile, synergistic treatment of STD and glycosylation significantly improved microstructure network structure of green soybean tofu and made it more homogeneous and denser. However, the green soybean tofu was faded and turned yellow under the combination of the STD and glycosylation. CONCLUSION: The results obtained through TOPSIS showed that the combination of thermal treatment (85 °C for 15 min) and glycosylation (20 g kg-1 glucose at 100 °C) had the greatest improvement in the characteristics of green soybean tofu. Hence, the combination treatment of STD and glycosylation should be useful for improving the quality characteristics of green soybean tofu and providing the technical references for industrial processing of tofu. © 2022 Society of Chemical Industry.

Insight into comparison of binding interactions and biological activities of whey protein isolate exposed prior to two structurally different sterols.

Although sterols have multiple physiological functions, low solubility and weak emulsifying properties of sterols affect their application in the food industry. However, binding interaction between protein and sterol potentially enhances its biological activities and emulsifying properties. In this work, effects of two structurally different sterols, namely ergosterol (ES) and γ-oryzanol (γS) on binding interactions, emulsifying properties, and biological activities of whey protein isolate (WPI)-sterol complexes were investigated and compared. Fluorescence spectroscopies and molecular docking presented that binding affinity of WPI treated with γS was stronger than that with ES. Importantly, WPI-γS exhibited stronger absolute value of ζ-potential, surface hydrophobicity, emulsifying characteristics and biological activities than WPI-ES. Principal component analysis (PCA) showed that emulsifying characteristics and biological activities of all the samples were positively correlated. This study provided a theoretical basis for the development and practical application of protein-sterol complexes as functional ingredients in food industry.