Finite Element Analysis of Different Carbon Fiber Reinforced Polyetheretherketone Dental Implants in Implant-supported Fixed Denture.

OBJECTIVES: The purpose of this study is to determine the feasibility of polyetheretherketone-based dental implants, and analyze the stress and strain around different kinds of dental implants by finite element analysis. METHODS: The radiographic data was disposed to models in Mimics 19.0. 3D models of implants, crowns and jawbones were established and combined in SolidWorks 2018. Appling axial and oblique loads of 100 N, cloud pictures were exported in Ansys Workbench 18.0 to calculate and analyze the stress and strain in and around different implants. RESULTS: Oblique load tended to deliver more stress to bone tissue than axial load. The uniformity of stress distribution was the best for 30% short carbon fiber reinforced polyetheretherketone implants at axial and buccolingual directions. Stress shielding phenomenon occurred at the neck of 60% continuous carbon fiber reinforced polyetheretherketone and titanium implants. Stress concentration appeared in PEEK implants and the load of bone tissue would aggravate. CONCLUSIONS: 30% short carbon fiber reinforced polyetheretherketone implants demonstrate a more uniform stress distribution in bone-implant contact and surrounding bone than titanium. Stress shielding and stress concentration may be avoided in bone-implant interface and bone tissue. Bone disuse-atrophy may be inhibited in PEEK-based implants.

Curcumin-loaded mesoporous polydopamine nanoparticles modified by quaternized chitosan against bacterial infection through synergistic effect.

Clinically, open wounds caused by accidental trauma and surgical lesion resection are easily infected by external bacteria, hindering wound healing. Antibacterial photodynamic therapy has become a promising treatment strategy for wound infection. In this study, a novel antibacterial nanocomposite material (QMC NPs) was synthesized by curcumin, quaternized chitosan and mesoporous polydopamine nanoparticles. The results showed that 150 µg/mL QMC NPs had good biocompatibility and exerted excellent antibacterial activity against Staphylococcus aureus and Escherichia coli after blue laser irradiation (450 nm, 1 W/cm2). In vivo, QMC NPs effectively treated bacterial infection and accelerated the healing of infected wounds in mice.

Macrophages in the process of osseointegration around the implant and their regulatory strategies.

PURPOSE/AIM OF THE STUDY: To summarize and discuss macrophage properties and their roles and mechanisms in the process of osseointegration in a comprehensive manner, and to provide theoretical support and research direction for future implant surface modification efforts. MATERIALS AND METHODS: Based on relevant high-quality articles, this article reviews the role of macrophages in various stages of osseointegration and methods of implant modification. RESULTS AND CONCLUSIONS: Macrophages not only promote osseointegration through immunomodulation, but also secrete a variety of cytokines, which play a key role in the angiogenic and osteogenic phases of osseointegration. There is no "good" or "bad" difference between the M1 and M2 phenotypes of macrophages, but their timely presence and sequential switching play a crucial role in implant osseointegration. In the implant surface modification strategy, the induction of sequential activation of the M1 and M2 phenotypes of macrophages is a brighter prospect for implant surface modification than inducing the polarization of macrophages to the M1 or M2 phenotypes individually, which is a promising pathway to enhance the effect of osseointegration and increase the success rate of implant surgery.

The Effect of Surface Electroplating on Fragment Deformation Behavior When Subjected to Contact Blasts.

Preformed fragments can deform or even fracture when subjected to contact blasts, which might lead to a reduction of the terminal effect. Therefore, to solve this problem, the effect of surface electroplating on the fragment deformation behavior under contact blasts was analyzed. Firstly, blast recovery tests were carried out on uncoated and coated fragments. After the contact blast, the two samples produced different deformation behaviors: the uncoated fragments were fractured, while the coated fragments maintained integrity. The tests were simulated by finite element simulation, and the deformation behavior of the different samples matched well with the test results, which can explain the protective effect of the coating after quantification. In order to further reveal the dynamic behavior involved, detonation wave theory and shock wave transmission theory in solids were used to calculate the pressure amplitude variation at the far-exploding surface of the fragments. The theoretical results showed that the pressure amplitude of the uncoated samples instantly dropped to zero after the shock wave passed through the far-exploding surface, which resulted in the formation of a tensile zone. But the pressure amplitude of the coated samples increased, transforming the tensile zone into the compression zone, thereby preventing the fracture of the fragment near the far-exploding surface, which was consistent with the test and simulated results. The test results, finite element simulations, and theories show that the coating can change the deformation behavior of the fragment and prevent the fracture phenomenon of the fragment. It also prevents the material from missing and a molten state of the fragment in the radial direction by microscopic observation and weight statistics.

Protein-polysaccharide-based delivery systems for enhancing the bioavailability of curcumin: A review.

In recent years, a wide attention has been paid to curcumin in medicine due to its excellent physiological activities, including anti-inflammatory, antioxidant, antibacterial, and nerve damage repair. However, the low solubility, poor stability, and rapid metabolism of curcumin make its bioavailability low, which affects its development and application. As a unique biopolymer structure, protein-polysaccharide (PRO-POL)-based delivery system has the advantages of low toxicity, biocompatibility, biodegradability, and delayed release. Many scholars have investigated PRO-POL -based delivery systems to improve the bioavailability of curcumin. In this paper, we focus on the interactions between different proteins (e.g. casein, whey protein, soybean protein isolate, pea protein, zein, etc.) and polysaccharides (chitosan, sodium alginate, hyaluronic acid, pectin, etc.) and their effects on complexes diameter, surface charge, encapsulation drive, and release characteristics. The mechanism of the PRO-POL-based delivery system to enhance the bioavailability of curcumin is highlighted. In addition, the application of PRO-POL complexes loaded with curcumin is summarized, aiming to provide a reference for the construction and application of PRO-POL delivery systems.

Antibacterial properties of antimicrobial peptide HHC36 modified polyetheretherketone.

Introduction: Polyetheretherketone (PEEK) is considered to be a new type of orthopedic implant material due to its mechanical properties and biocompatibility. It is becoming a replacement for titanium (Ti) due to its near-human-cortical transmission and modulus of elasticity. However, its clinical application is limited because of its biological inertia and susceptibility to bacterial infection during implantation. To solve this problem, there is an urgent need to improve the antibacterial properties of PEEK implants. Methods: In this work, we fixed antimicrobial peptide HHC36 on the 3D porous structure of sulfonated PEEK (SPEEK) by a simple solvent evaporation method (HSPEEK), and carried out characterization tests. We evaluated the antibacterial properties and cytocompatibility of the samples in vitro. In addition, we evaluated the anti-infection property and biocompatibility of the samples in vivo by establishing a rat subcutaneous infection model. Results: The characterization test results showed that HHC36 was successfully fixed on the surface of SPEEK and released slowly for 10 days. The results of antibacterial experiments in vitro showed that HSPEEK could reduce the survival rate of free bacteria, inhibit the growth of bacteria around the sample, and inhibit the formation of biofilm on the sample surface. The cytocompatibility test in vitro showed that the sample had no significant effect on the proliferation and viability of L929 cells and had no hemolytic activity on rabbit erythrocytes. In vivo experiments, HSPEEK can significantly reduce the bacterial survival rate on the sample surface and the inflammatory reaction in the soft tissue around the sample. Discussion: We successfully loaded HHC36 onto the surface of SPEEK through a simple solvent evaporation method. The sample has excellent antibacterial properties and good cell compatibility, which can significantly reduce the bacterial survival rate and inflammatory reaction in vivo. The above results indicated that we successfully improved the antibacterial property of PEEK by a simple modification strategy, making it a promising material for anti-infection orthopedic implants.

Application of biomolecules modification strategies on PEEK and its composites for osteogenesis and antibacterial properties.

As orthopedic and dental implants, polyetheretherketone (PEEK) is expected to be a common substitute material of titanium (Ti) and its alloys due to its good biocompatibility, chemical stability, and elastic modulus close to that of bone tissue. It could avoid metal allergy and bone resorption caused by the stress shielding effect of Ti implants, widely studied in the medical field. However, the lack of biological activity is not conducive to the clinical application of PEEK implants. Therefore, the surface modification of PEEK has increasingly become one of the research hotspots. Researchers have explored various biomolecules modification methods to effectively enhance the osteogenic and antibacterial activities of PEEK and its composites. Therefore, this review mainly summarizes the recent research of PEEK modified by biomolecules and discusses the further research directions to promote the clinical transformation of PEEK implants.

SiGe/Si Multi-Quantum-Well Micro-Bolometer Array Design and Fabrication with Heterogeneous Integration.

The micro-bolometer is important in the field of infrared imaging, although improvements in its performance have been limited by traditional materials. SiGe/Si multi-quantum-well materials (SiGe/Si MQWs) are novelty thermal-sensitive materials with a significantly high TCR and a comparably low 1/f noise. The application of such high-performance monocrystalline films in a micro-bolometer has been limited by film integration technology. This paper reports a SiGe/Si MQWs micro-bolometer fabrication with heterogeneous integration. The integration with the SiGe/Si MQWs handle wafer and dummy read-out circuit wafer was achieved based on adhesive wafer bonding. The SiGe/Si MQWs infrared-absorption structure and thermal bridge were calculated and designed. The SiGe/Si MQWs wafer and a 320 × 240 micro-bolometer array of 40 µm pitch L-type pixels were fabricated. The test results for the average absorption efficiency were more than 90% at the wavelength of 8-14 µm. The test pixel was measured to have a thermal capacity of 1.043 × 10-9 J/K, a thermal conductivity of 1.645 × 10-7 W/K, and a thermal time constant of 7.25 ms. Furthermore, the total TCR value of the text pixel was measured as 2.91%/K with a bias voltage of 0.3 V. The SiGe/Si MQWs micro-bolometer can be widely applied in commercial fields, especially in early medical diagnosis and biological detection.

Wafer-Level 3D Integration Based on Poly (Diallyl Phthalate) Adhesive Bonding.

Three-dimensional integration technology provides a promising total solution that can be used to achieve system-level integration with high function density and low cost. In this study, a wafer-level 3D integration technology using PDAP as an intermediate bonding polymer was applied effectively for integration with an SOI wafer and dummy a CMOS wafer. The influences of the procedure parameters on the adhesive bonding effects were determined by Si-Glass adhesive bonding tests. It was found that the bonding pressure, pre-curing conditions, spin coating conditions, and cleanliness have a significant influence on the bonding results. The optimal procedure parameters for PDAP adhesive bonding were obtained through analysis and comparison. The 3D integration tests were conducted according to these optimal parameters. In the tests, process optimization was focused on Si handle-layer etching, PDAP layer etching, and Au pillar electroplating. After that, the optimal process conditions for the 3D integration process were achieved. The 3D integration applications of the micro-bolometer array and the micro-bridge resistor array were presented. It was confirmed that 3D integration based on PDAP adhesive bonding is suitable for the fabrication of system-on-chip when using MEMS and IC integration and that it is especially useful for the fabrication of low-cost suspended-microstructure on-CMOS-chip systems.

Curcumin: A review of experimental studies and mechanisms related to periodontitis treatment.

Curcumin is the main active ingredient of turmeric, which has a wide range of pharmacological effects, including antitumor, antibacterial, anti-inflammatory, anti-oxidation, immune regulation, and so on. Periodontitis is a prevalent oral inflammatory disease caused by a variety of factors. In recent years, many studies have shown that curcumin has a potential role on the treatment of periodontitis. Curcumin has been used in research related to the treatment of periodontitis in the form of solution, chip, gel, and capsule. Combined with other periodontitis treatment methods, such as scaling and root planing (SRP) and photodynamic therapy (PDT), can enhance curcumin's efficacy in treating periodontitis. In addition to natural curcumin, chemically modified curcumin, such as 4-phenylaminocarbonyl bis-demethoxy curcumin (CMC 2.24) and 4-methoxycarbonyl curcumin (CMC 2.5), have also been used in animal models of periodontitis. Here, this paper reviews the research progress of curcumin on the treatment of periodontitis and its related mechanisms.

Association of three missense mutations in the homocysteine-related MTHFR and MTRR gene with risk of polycystic ovary syndrome in Southern Chinese women.

BACKGROUND: The etiology between homocysteine and polycystic ovary syndrome (PCOS) is unclear. In humans, the level of homocysteine is mainly affected by two enzymes: methylene tetrahydrofolate reductase (MTHFR) and methionine synthase reductase (MTRR). While the activity of these two enzymes is mainly affected by three missense mutations, namely C677T (MTHFR), A1298C (MTHFR), and A66G (MTRR). This study aims to examine the association between the three missense mutations and PCOS and investigate whether the three missense mutations exerted their effect on PCOS by affecting the homocysteine level. METHODS: A case-control study was designed, comprising 150 people with PCOS and 300 controls. Logistic regression analysis was used to assess the association between the three missense mutations and PCOS. Linear regression analysis was used to assess the association between the three missense mutations and the homocysteine level. Mediation analysis was used to investigate whether the three missense mutations exerted their effect on PCOS by affecting the homocysteine level. RESULTS: Following adjustments and multiple rounds of testing, MTHFR A1298C was found to be significantly associated with PCOS in a dose-dependent manner (compared to AA, OR = 2.142 for AC & OR = 3.755 for CC; P < 0.001). MTRR A66G was nominally associated with PCOS. Mutations in MTHFR A1298C and MTRR A66G were significantly associated with the homocysteine level. Mediation analysis suggested the effect of MTHFR A1298C on PCOS was mediated by homocysteine. CONCLUSIONS: MTHFR A1298C and MTRR A66G were associated with PCOS, and MTHFR A1298C might affect the risk of PCOS by influencing the homocysteine level.

The history force on bubbles translational motion in an acoustic field.

In this study, the translational trajectory of bubble in an ultrasonic standing wave at 22.4 kHz was observed using an imaging system with a high-speed video camera. This allowed the velocities of bubble be measured when the acoustic pressure at 20 kPa, 40 kPa and 60 kPa, which applied to indirectly measured the history force by using the acoustic and hydrodynamic forces balance model. It shown that bubbles driven at low acoustic pressure, the history force close to zero, and with the pressure increase the history force change to large, the ratio of FH/FQS from 0.33 at 40 kPa to 1.73 at 60 kPa, the result is different with prior research when the Reynolds numbers is large, and useful in the understanding of bubble moments in an acoustic field.

Meta-analysis of the association between serum iron levels and Parkinson's disease: Evidence from 11 publications.

BACKGROUND: There is no consensus on the serum iron levels and Parkinson's disease (PD). The aim of this study is to conduct a systematic review and meta-analysis to analyse the relationship between serum iron levels and PD risk. METHODS: We searched the databases of PubMed, Web of knowledge, Embase, the Cochrane Library, China National Knowledge Infrastructure (CNKI) and China Biology Medical literature to assess the association between serum iron levels and PD risk. Standardized mean differences (SMD) and 95% confidence intervals (CI) with random-effect model were used to combine the results. RESULTS: Eleven related articles met our selection criteria and contained a total of 829PD patients and 1219 healthy controls. Our meta-analysis results revealed that the serum iron levels in PD patients were significantly higher than those in healthy controls (SMD=0.27, 95% CI=0.18, 0.37, P<0.001). Subgroup analysis by ethnicity showed that the serum iron levels in PD patients were significantly higher than controls both in Asian populations and European populations. Significant associations were also found in prospective studies and case-control studies. CONCLUSIONS: Our meta-analysis showed strong evidence that a significantly higher serum iron levels are present in PD patients when compared to the healthy controls.

[Impacts of eye acupuncture on neurological deficit and Barthel index in patients of infarction hemiplegia].

OBJECTIVE: To observe the impacts of eye acupuncture on neurological deficit and Barthel index in the patients of infarction hemiplegia and explore its function mechanism. METHODS: Ninety-six patients of infarction hemiplegia were randomized into an observation group and a control group, 48 cases in each one. In the control group, the routine western medicines such as thrombolysis and antiplatelet aggregation were used. In the observation group, on the basis of the treatment as the control group, eye acupuncture was added at Shangjiao and Xiajiao areas bilaterally, once a day, 5 times a week. Separately, before treatment and after 2 weeks' treatment the score changes of the modified Edinburgh Scandinavia stroke scale (MESSS) and the activity of daily life scale (ADL, Barthel index, BI) were observed and the efficacy was compared between the two groups. The plasma endothelin was determined and compared before and after treatment in the two groups. RESULTS: After treatment, the effective rate was 93.8% (45/48) in the observation group and was 79.2% (38/48) in the control group. The effective rate in the observation group was higher apparently than that in the control group (P<0.05). The scores of neurological deficit were (13.29±1.45) and (18.24±1.33) in the observation group and control group respectively after treatment, which all lower apparently than (28.44±1.45) and (28.14±1.89) before treatment (both P<0.05). Additionally, the difference was significant between the two groups after treatment (P<0.05). The scores of Barthel index were (82.33±1.56) and (63.34±2.14) in the observation group and control group respectively, which all higher apparently than (38.53±1.54) and (38.14±2.56) before treatment (both P<0.05), and the difference was significant between the two groups after treatment (P<0.05). The levels of plasma endothelin were (54.55±11.48)ng/L and (62.44±9.88)ng/L in the observation group and the control group after treatment respectively, which were all lower apparently than (78.24±9.25)ng/L and (78.14±10.78)ng/L before treatment (both P<0.05). Additionally, the difference was significant between the two groups after treatment (P<0.05). CONCLUSIONS: Eye acupuncture effectively improves the neurological deficit and Brathel index in the patients of infarction hemiplegia and comprehensively improves the efficacy. The effect mechanism is possibly relevant with reducing plasma endothelin.

Prediction, simulation, and verification of the phase noise in 80-MHz low-phase-noise crystal oscillators.

To predict the phase noise in an 80-MHz crystal oscillator, on the basis of the classical Leeson model, we analyzed and selected the oscillator noise figure F and transistor corner frequency fc reasonably, and then calculated the loaded Q (QL) value of the oscillator according to the parameters in the selected Butler oscillation circuit. Thus, we obtained the predicted phase noise in an 80-MHz crystal oscillator according to the Leeson phase noise formula. Next, the simulation curve of the phase noise in this 80-MHz low-phase-noise crystal oscillator was obtained by establishing a transistor nonlinear model using commercial design software. Then, we debugged the 80-MHz low-phase-noise crystal oscillator prototype under the guidance of the prediction and simulation results and tested it. The measured results show that the phase noise predicted after selecting reasonable parameters for the Leeson model and the ADS simulation curve of the phase noise obtained by using the nonlinear transistor model are both close to the actual measured result. This result may be beneficial in simplifying the design process for low-phase-noise crystal oscillators.

Influence of acoustic pressure and bubble sizes on the coalescence of two contacting bubbles in an acoustic field.

In this study, the coalescence time between two contacting sub-resonance size bubbles was measured experimentally under an acoustic pressure ranging from 10kPa to 120kPa, driven at a frequency of 22.4kHz. The coalescence time obtained under sonication was much longer compared to that calculated by the film drainage theory for a free bubble surface without surfactants. It was found that under the influence of an acoustic field, the coalescence time could be probabilistic in nature, exhibiting upper and lower limits of coalescence times which are prolonged when both the maximum surface approach velocity and secondary Bjerknes force increases. The size of the two contacting bubbles is also important. For a given acoustic pressure, bubbles having a larger average size and size difference were observed to exhibit longer coalescence times. This could be caused by the phase difference between the volume oscillations of the two bubbles, which in turn affects the minimum film thickness reached between the bubbles and the film drainage time. These results will have important implications for developing film drainage theory to account for the effect of bubble translational and volumetric oscillations, bubble surface fluctuations and microstreaming.

Experimental and theoretical analysis of secondary Bjerknes forces between two bubbles in a standing wave.

Bubbles in an acoustic field are affected by forces such as primary and secondary Bjerknes forces, which have been shown to be influenced by acoustic pressure, frequency, bubble size and separation distance between bubbles. However, such studies are predominantly theoretical, and are mostly focused on the sign reversal of the secondary Bjerknes force. This study provides experimental data on the effect of a range of bubble sizes (8-30 µm), distances (⩽0.2 mm), acoustic pressures (20-40 kPa) and frequencies (40-100 kHz) on the relative acceleration of two approaching bubbles. Under these conditions, only variations in the magnitude of the attractive force were observed. Using coupled equations of radial and translational motions, the acceleration and secondary Bjerknes force were calculated and compared to the experimental data. The variations in the magnitude of the secondary Bjerknes forces were explained by simulating bubble radius and coupled volume oscillation as a function of time.

Experimental and theoretical studies on the movements of two bubbles in an acoustic standing wave field.

When subjected to an ultrasonic standing-wave field, cavitation bubbles smaller than the resonance size migrate to the pressure antinodes. As bubbles approach the antinode, they also move toward each other and either form a cluster or coalesce. In this study, the translational trajectory of two bubbles moving toward each other in an ultrasonic standing wave at 22.4 kHz was observed using an imaging system with a high-speed video camera. This allowed the speed of the approaching bubbles to be measured for much closer distances than those reported in the prior literature. The trajectory of two approaching bubbles was modeled using coupled equations of radial and translational motions, showing similar trends with the experimental results. We also indirectly measured the secondary Bjerknes force by monitoring the acceleration when bubbles are close to each other under different acoustic pressure amplitudes. Bubbles begin to accelerate toward each other as the distance between them gets shorter, and this acceleration increases with increasing acoustic pressure. The current study provides experimental data that validates the theory on the movement of bubbles and forces acting between them in an acoustic field that will be useful in understanding bubble coalescence in an acoustic field.

[Effects of different concentration extract from shenghua decoction on contractile activity of the uterine smooth muscle isolated from normal, estrogen-treated and postpartum mice].

OBJECTIVE: To investigate the effects of different concentration extract from Shenghua decoction on contractile activity of the uterine smooth muscle isolated from normal, estrogen-treated and postpartum mice. METHOD: Medlab/4 s vital signal recorder was used to measure the effects of extract from Shenghua decoction (3-12 mg x mL(-1)) on contractile amplitude and frequency of the isolated uterus from normal, estrogen-treated and postpartum mice. RESULT: Shenghua decoction extract (3-12 mg x mL(-1)) significantly decreased the contractile activity of the mouse isolated uterus in normal non-pregnancy and postpartum, but significantly increased that of the mouse isolated uterus treated with estrogen, and didn't show significant concentration-response relationship. CONCLUSION: The effects of Shenghua decoction extract on contractile activity of mouse-isolated uterus treated with estrogen cannot represent the pharmacological effects on that of in normal non-pregnancy and postpartum uterus.