RESUMEN
Organosilanes are commonly utilized to attach bioreceptors to oxide surfaces. The deposition of such silane layers is especially challenging in nanoscale or nanoconfined devices, such as in nanopipettes, since rinsing off loosely bound silanes may not be possible due to geometric constrictions and because the thickness of multilayered silanes can cover or block nanoscale features. Furthermore, in electrochemical devices, the silane layers experience additional perturbations, such as electric migration and electroosmotic force. Despite its importance, there appears to be no consensus in the current literature on the optimal methodology for nanopipette silanization, with significant variations in reported conditions. Herein, we systematically investigate the reproducibility and stability of liquid- and vapor-phase deposited silane layers inside nanopipettes. Electrochemical monitoring of the changing internal silanized surface reveals that vapor-deposited APTES generates surface modifications with the highest reproducibility, while vapor-deposited APTMS generates surface modifications of the highest stability over a 24-hour time period. Practical issues of silanizing nanoconfined systems are highlighted, and the importance of carefully chosen silanization conditions to yield stable and reproducible monolayers is emphasized as an underappreciated aspect in the development of novel nanoscale systems.
RESUMEN
While ion current rectification (ICR) in aprotic solvent has been fundamentally studied, its application in sensing devices lacks exploration. The development of sensors operable in these solvents is highly beneficial to the chemical industry, where polar aprotic solvents, such as acetonitrile, are widely used. Currently, this industry relies on the use of inductively coupled plasma mass spectrometry (ICP-MS) and optical emission spectroscopy (OES) for the detection of metal contamination in organic products. Herein, we present the detection of trace amounts of Pd2+ and Co2+ using ion current rectification, in cyclam-functionalized quartz nanopipettes, with tetraethylammonium tetrafluoroborate (TEATFB) in MeCN as supporting electrolyte. This methodology is employed to determine the concentration of Pd in organic products, before and after purification by Celite filtration and column chromatography, obtaining comparable results to ICP-MS within minutes and without complex sample preparation. Finite element simulations are used to support our experimental findings, which reveal that the formation of double-junction diodes in the nanopore enables trace detection of these metals, with a significant response from baseline even at picomolar concentrations.
RESUMEN
Six decades after its conception, proton computed tomography (pCT) and proton radiography have yet to be used in medical clinics. However, good progress has been made on relevant detector technologies in the past two decades, and a few prototype pCT systems now exist that approach the performance needed for a clinical device. The tracking and energy-measurement technologies in common use are described, as are the few pCT scanners that are in routine operation at this time. Most of these devices still look like detector R&D efforts as opposed to medical devices, are difficult to use, are at least a factor of five slower than desired for clinical use, and are too small to image many parts of the human body. Recommendations are made for what to consider when engineering a pre-clinical pCT scanner that is designed to meet clinical needs in terms of performance, cost, and ease of use.
Asunto(s)
Protones , Tomografía Computarizada por Rayos X , Tomografía Computarizada por Rayos X/instrumentación , HumanosRESUMEN
Ion current rectification is highly reported in aqueous electrochemical systems and sensors but lacks exploration in organic systems due to the additional complexity introduced by non-aqueous solvents. Herein, a detailed study on ion current rectification with highly polar and mildly polar aprotic organic solvents as a function of tetraethylammonium tetrafluoroborate supporting electrolyte concentration is presented. To explain our experimental results, we introduce a previously unreported phenomenon: the formation of a double-junction diode within the nanopore that arises due to a complex interplay between ion and solvent enrichment effects. Finite element simulations are used to explore this phenomenon and the subsequent effect on the rectifying behavior of conical quartz nanopores.
Asunto(s)
Nanoporos , Electrólitos , Transporte Iónico , SolventesRESUMEN
A thorough understanding of nanoscale transport properties is vital for the development and optimization of nanopore sensors. The thickness of the electrical double layers (EDLs) at the internal walls of a nanopore, as well as the dimensions of the nanopore itself, plays a crucial role in determining transport properties. Herein, we demonstrate the effect of the electrolyte concentration, which is inversely proportional to the EDL thickness, and the effect of pore size, which controls the extent of the electrical double layer overlap, on the ion current rectification phenomenon observed for conical nanopores. Experimental and numerical results showed that as the electrolyte concentration is decreased, the rectification ratio reaches a maximum, then decreases, and eventually inverts below unity. We also show that as the pore size is decreased, the rectification maximum and the inversion take place at higher electrolyte concentrations. Numerical investigations revealed that both phenomena occur due to the shifting of ion enrichment distributions within the nanopore as the electrolyte concentration or the pore size is varied.
RESUMEN
BACKGROUND: Improving the accuracy of relative stopping power (RSP) in proton therapy may allow reducing range margins. Proton computed tomography (pCT) has been shown to provide state-of-the-art RSP accuracy estimation, and various scanner prototypes have recently been built. The different approaches used in scanner design are expected to impact spatial resolution and RSP accuracy. PURPOSE: The goal of this study was to perform the first direct comparison, in terms of spatial resolution and RSP accuracy, of two pCT prototype scanners installed at the same facility and by using the same image reconstruction algorithm. METHODS: A phantom containing cylindrical inserts of known RSP was scanned at the phase-II pCT prototype of the U.S. pCT collaboration and at the commercially oriented ProtonVDA scanner. Following distance-driven binning filtered backprojection reconstruction, the radial edge spread function of high-density inserts was used to estimate the spatial resolution. RSP accuracy was evaluated by the mean absolute percent error (MAPE) over the inserts. No direct imaging dose estimation was possible, which prevented a comparison of the two scanners in terms of RSP noise. RESULTS: In terms of RSP accuracy, both scanners achieved the same MAPE of 0.72% when excluding the porous sinus insert from the evaluation. The ProtonVDA scanner reached a better overall MAPE when all inserts and the body of the phantom were accounted for (0.81%), compared to the phase-II scanner (1.14%). The spatial resolution with the phase-II scanner was found to be 0.61 lp/mm, while for the ProtonVDA scanner somewhat lower at 0.46 lp/mm. CONCLUSIONS: The comparison between two prototype pCT scanners operated in the same clinical facility showed that they both fulfill the requirement of an RSP accuracy of about 1%. Their spatial resolution performance reflects the different design choices of either a scanner with full tracking capabilities (phase-II) or of a more compact tracker system, which only provides the positions of protons but not their directions (ProtonVDA).
Asunto(s)
Terapia de Protones , Protones , Calibración , Procesamiento de Imagen Asistido por Computador/métodos , Fantasmas de Imagen , Terapia de Protones/métodos , Tomógrafos Computarizados por Rayos X , Tomografía Computarizada por Rayos X/métodosRESUMEN
Proton computed tomography (pCT) is a promising tomographic imaging modality allowing direct reconstruction of proton relative stopping power (RSP) required for proton therapy dose calculation. In this review article, we aim at highlighting the role of Monte Carlo (MC) simulation in pCT studies. After describing the requirements for performing proton computed tomography and the various pCT scanners actively used in recent research projects, we present an overview of available MC simulation platforms. The use of MC simulations in the scope of investigations of image reconstruction, and for the evaluation of optimal RSP accuracy, precision and spatial resolution omitting detector effects is then described. In the final sections of the review article, we present specific applications of realistic MC simulations of an existing pCT scanner prototype, which we describe in detail.
Asunto(s)
Terapia de Protones , Método de Montecarlo , Fantasmas de Imagen , Terapia de Protones/métodos , Protones , Tomografía/métodosRESUMEN
Inspired by the nuclear pore complex (NPC), herein we have established a biomimetic high-flux protein delivery system via the ingenious introduction of pillar[5]arene-based host-guest system into one side of artificial hour-glass shaped nanochannel. With a transport flux of 660 lysozymes per minute, the system provides efficient high-flux protein transport at a rate which is significantly higher than that of an unmodified nanochannel and conventional bilateral symmetrical modified nanochannels. In view of these promising results, the use of artificial nanochannel to improve protein transport not only presents a new potential chemical model for biological research and better understanding of protein transport behavior in the living systems, but also provides a high-flux protein transporter device, which may have applications in the design of protein drug release systems, protein separation systems and microfluidics in the near future.
Asunto(s)
Materiales Biomiméticos/química , Poro Nuclear/metabolismo , Proteínas/metabolismo , Materiales Biomiméticos/metabolismo , Calixarenos/síntesis química , Calixarenos/química , Microscopía Confocal , Muramidasa/metabolismo , Nanoestructuras/química , Poro Nuclear/química , Fenilalanina/química , Transporte de ProteínasRESUMEN
Proton CT (pCT) is a promising new imaging technique that can reconstruct relative stopping power (RSP) more accurately than x-ray CT in each cubic millimeter voxel of the patient. This, in turn, will result in better proton range accuracy and, therefore, smaller planned tumor volumes (PTV). The hardware description and some reconstructed images have previously been reported. In a series of two contributions, we focus on presenting the software algorithms that convert pCT detector data to the final reconstructed pCT images for application in proton treatment planning. There were several options on how to accomplish this, and we will describe our solutions at each stage of the data processing chain. In the first paper of this series, we present the data acquisition with the pCT tracking and energy-range detectors and how the data are preprocessed, including the conversion to the well-formatted track information from tracking data and water-equivalent path length from the data of a calibrated multi-stage energy-range detector. These preprocessed data are then used for the initial image formation with an FDK cone-beam CT algorithm. The output of data acquisition, preprocessing, and FDK reconstruction is presented along with illustrative imaging results for two phantoms, including a pediatric head phantom. The second paper in this series will demonstrate the use of iterative solvers in conjunction with the superiorization methodology to further improve the images resulting from the upfront FDK image reconstruction and the implementation of these algorithms on a hybrid CPU/GPU computer cluster.
RESUMEN
PURPOSE: To reduce image artifacts of proton computed tomography (pCT) from a preclinical scanner, for imaging of the relative stopping power (RSP) needed for particle therapy treatment planning using a simple empirical artifact correction method. METHODS: We adapted and employed a correction method previously used for beam-hardening correction in x-ray CT which makes use of a single scan of a custom-built homogeneous phantom with known RSP. Exploiting the linearity of the filtered backprojection operation, a function was found which corrects water-equivalent path lengths (RSP line integrals) in experimental scans using a prototype pCT scanner. The correction function was applied to projection values of subsequent scans of a homogeneous water phantom, a sensitometric phantom with various inserts and an anthropomorphic head phantom. Data were acquired at two different incident proton energies to test the robustness of the method. RESULTS: Inaccuracies in the detection process caused an offset and known ring artifacts in the water phantom which were considerably reduced using the proposed method. The mean absolute percentage error (MAPE) of mean RSP values of all inserts of the sensitometric phantom and the water phantom was reduced from 0.87% to 0.44% and from 0.86% to 0.48% for the two incident energies respectively. In the head phantom a clear reduction of artifacts was observed. CONCLUSIONS: Image artifacts of experimental pCT scans with a prototype scanner could substantially be reduced both in homogeneous, heterogeneous and anthropomorphic phantoms. RSP accuracy was also improved.
Asunto(s)
Artefactos , Protones , Algoritmos , Procesamiento de Imagen Asistido por Computador , Fantasmas de Imagen , Tomógrafos Computarizados por Rayos X , Tomografía Computarizada por Rayos XRESUMEN
PURPOSE: To reduce imaging artifacts and improve image quality of a specific proton computed tomography (pCT) prototype scanner by combining pCT data acquired at two different incident proton energies to avoid protons stopping in sub-optimal detector sections. METHODS: Image artifacts of a prototype pCT scanner are linked to protons stopping close to internal structures of the scanner's multi-stage energy detector. We aimed at avoiding such protons by acquiring pCT data at two different incident energies and combining the data in post-processing from which artifact-reduced images of the relative stopping power (RSP) were calculated. Energy-modulated pCT (EMpCT) images were assessed visually and quantitatively and compared to the original mono-energetic images in terms of RSP accuracy and noise. Data were acquired for a homogeneous water phantom. RESULTS: RSP images reconstructed from the mono-energetic datasets displayed local image artifacts which were ring-shaped due to the homogeneity of the phantom. The merged EMpCT dataset achieved a superior visual image quality with reduced artifacts and only minor remaining rings. The inter-quartile range (25/75) of RSP values was reduced from 0.7% with the current standard acquisition to 0.2% with EMpCT due to the reduction of ring artifacts. In this study, dose was doubled compared to a standard scan, but we discuss strategies to reduce excess dose. CONCLUSIONS: EMpCT allows to effectively avoid regions of the energy detector that cause image artifacts. Thereby, image quality is improved.
Asunto(s)
Artefactos , Protones , Algoritmos , Calibración , Procesamiento de Imagen Asistido por Computador , Fantasmas de Imagen , Tomografía Computarizada por Rayos XRESUMEN
Inspired by the light-regulating capabilities of naturally occurring rhodopsin, we have constructed a visible-light-regulated Cl- -transport membrane channel based on a supramolecular host-guest interaction. A natural retinal chromophore, capable of a visible-light response, is used as the guest and grafted into the artificial channel. Upon introduction of an ethyl-urea-derived pillar[6]arene (Urea-P6) host, threading or de-threading of the retinal and selective bonding of Cl- can be utilized to regulate ion transport. Based on the visible-light responsiveness of the host-guest interaction, Cl- transport can be regulated by visible light between ON and OFF states. Visible-light-regulated Cl- transport as a chemical model permits to understand comparable biological ion-selective transport behaviors. Furthermore, this result also supplies a smart visible-light-responsive Cl- transporter, which may have applications in natural photoelectric conversion and photo-controlled delivery systems.
Asunto(s)
Canales de Cloruro/metabolismo , Luz , Rodopsina/metabolismo , Materiales Biomiméticos/química , Materiales Biomiméticos/metabolismo , Canales de Cloruro/química , Cloruros/metabolismo , Transporte Iónico/efectos de la radiación , Membranas Artificiales , Tereftalatos Polietilenos/química , Compuestos de Amonio Cuaternario/química , Rodopsina/química , Urea/análogos & derivados , Urea/químicaRESUMEN
Mr. Richard Clarke presents in this Journal his arguments against continued application of hyperbaric oxygen (HBO2) therapy to the pre-extraction neoadjuvant treatment or the treatment of frank mandibular ORN. In the same article he advocates a promising renewed interest in HBO2 as a radiosensitizer. Arguments against HBO2 prior to extractions are based on several papers which consistently include low-risk patients. The just-released HOPON trial reports a negative pre-extraction outcome for HBO2, but patients were enrolled with radiation doses as low as 50Gy. For advanced mandibular necrosis (Marx Stage III) requiring resection, fibular free flap reconstruction is advocated. A high complication rate with free flaps is acknowledged but the magnitude of these complications is not discussed. A cost savings for this procedure is suggested, but no mention is made of the typical cost of the procedure ($90,000) or the requirement of a typical one-week hospital stay, including an initial one or two days in the ICU. Nor is mention made of the very low rate of subsequent dental rehabilitation. The success reported by Delainian, et al. employing pentoxifylline, Vitamin E and sometimes a bisphosphonate is equated to the four decades of HBO2 success with the Marx protocol for Stage I and II ORN. In the phase II trial by Delainian (not randomized) six of her 54 patients died secondary to sepsis, and she graded patients as complete responders if 5mm or less bone was exposed. Even at entry patients had an average of only 1.7 cm exposed bone and treatment was prolonged (16 + or -9 months). Any cost comparison studies will have to account for the indirect expenses of this prolonged treatment including lost productivity.
Asunto(s)
Neoplasias de Cabeza y Cuello , Oxigenoterapia Hiperbárica , Osteorradionecrosis , Procedimientos de Cirugía Plástica , Femenino , Humanos , Masculino , Mandíbula/cirugíaRESUMEN
Data filtering is crucial for accurate relative stopping power (RSP) reconstruction in proton CT (pCT). In this work, we assess different filters and their performance for the US pCT collaboration prototype pCT system in Monte Carlo (MC) simulations. The potential of using the recently proposed [Formula: see text]-E filter for removing nuclear interactions that occurred in the energy/range detector of the pCT system is investigated. Full pCT scans were acquired with the TOPAS MC simulated version of the prototype scanner that comprises two tracking detectors and a five stage energy/range detector. An ideal water cylinder and a water cylinder with five tissue inserts were investigated. Before image reconstruction, a [Formula: see text] WEPL filter was applied as the only filter, or in addition to filters acting on the energy deposit in each of the energy detector stages, as done currently with the prototype. The potential of the [Formula: see text]-E filter that was recently proposed for helium imaging was assessed. The results were compared to simulations for which nuclear interactions were disabled representing ground truth. The [Formula: see text] WEPL filter alone was not sufficient to filter out all nuclear interaction events and systematic fluctuations in the form of ring artifacts were present in the pCT reconstructed images. Applying energy filters currently used with the device prior to the [Formula: see text] WEPL filter only slightly improved the image quality. A [Formula: see text] WEPL filter improved the mean RSP accuracy, but could not fully remove the systematic fluctuations. The [Formula: see text]-E filter in addition to the current reconstruction procedure efficiently removed the systematic fluctuations and the achieved RSP accuracy closely matched the simulation without nuclear interactions. This study demonstrates the dependence of the accuracy of the usual [Formula: see text] WEPL filter on uncertainties arising within the energy detector. By enabling to remove such uncertainties, the [Formula: see text]-E method proved to yield some potential for improving the accuracy of pCT.
Asunto(s)
Protones , Tomografía/instrumentación , Método de Montecarlo , Tomografía/métodosRESUMEN
Proton computed tomography (pCT) has been proposed as an alternative to x-ray computed tomography (CT) for acquiring relative to water stopping power (RSP) maps used for proton treatment planning dose calculations. In parallel, it has been shown that dual energy x-ray CT (DECT) improves RSP accuracy when compared to conventional single energy x-ray CT. This study aimed at directly comparing the RSP accuracy of both modalities using phantoms scanned at an advanced prototype pCT scanner and a state-of-the-art DECT scanner. Two phantoms containing 13 tissue-mimicking inserts of known RSP were scanned at the pCT phase II prototype and a latest generation dual-source DECT scanner (Siemens SOMATOM Definition FORCE). RSP accuracy was compared by mean absolute percent error (MAPE) over all inserts. A highly realistic Monte Carlo (MC) simulation was used to gain insight on pCT image artifacts which degraded MAPE. MAPE was 0.55% for pCT and 0.67% for DECT. The realistic MC simulation agreed well with pCT measurements ([Formula: see text]). Both simulation and experimental results showed ring artifacts in pCT images which degraded the MAPE compared to an ideal pCT simulation ([Formula: see text]). Using the realistic simulation, we could identify sources of artifacts, which are attributed to the interfaces in the five-stage plastic scintillator energy detector and calibration curve interpolation regions. Secondary artifacts stemming from the proton tracker geometry were also identified. The pCT prototype scanner outperformed a state-of-the-art DECT scanner in terms of RSP accuracy (MAPE) for plastic tissue mimicking inserts. Since artifacts tended to concentrate in the inserts, their mitigation may lead to further improvements in the reported pCT accuracy.
Asunto(s)
Fantasmas de Imagen , Terapia de Protones/métodos , Tomógrafos Computarizados por Rayos X , Tomografía Computarizada por Rayos X/métodos , Calibración , Humanos , Método de MontecarloRESUMEN
Robust methods, such as Tikhonov regularization and Bounded data uncertainty, have been used extensively in relatively small problems involving dense matrices for many decades, but have not been used in large-scale iterative methods for image reconstruction in particle imaging until recently. In this case, robust methods may allow more accurate reconstruction of images in the presence of errors of both the energy measurement of the protons and ions but also in the estimated path taken by the proton or ion through the object. Robust systems may also be used when entire blocks of data are missing, or in low-dose reconstructions using a very small number of particles without substantial loss of image quality. In this contribution, we demonstrate that robust methods show great promise in proton/ion (particle) computed tomography (pCT), and, for the first time, that they can be proven to converge. Thus, the convergence of robust methods as well as benefits for reconstruction in uncertain systems is shown to constitute the main advantage for pCT reconstruction.
RESUMEN
Amino acid metabolic abnormalities will cause serious diseases, which arise from the different biological effect of enantiomers. Therefore, it is necessary to design and construct an artificial chiral amino acid gated transport system, which can effectively recognize and selectively transport chiral amino acids. Herein, based on the host-guest interaction, a switchable chiral discrimination system for amino acid enantiomers is reported, and the biomimetic nanochannel was functionalized with N-(1-naphthyl) ethylenediamine (NEDA), which acts as the guest and γ-CD was used as the host. The artificial nanochannel performs highly chiral selective gating for l-phenylalanine and well regulates the process of amino acid transportation. Moreover, the channel can easily actualize the reversible switching under the influence of a pH change; thus, our biomimetic nanochannel with a host-guest assembly can be widely used in chiral detection and drug delivery.
RESUMEN
Single-event ion imaging enables the direct reconstruction of the relative stopping power (RSP) information required for ion-beam therapy. Helium ions were recently hypothesized to be the optimal species for such technique. The purpose of this work is to investigate the effect of secondary fragments on the image quality of helium CT (HeCT) and to assess the performance of a prototype proton CT (pCT) scanner when operated with helium beams in Monte Carlo simulations and experiment. Experiments were conducted installing the U.S. pCT consortium prototype scanner at the Heidelberg Ion-Beam Therapy Center (HIT). Simulations were performed with the scanner using the TOPAS toolkit. HeCT images were reconstructed for a cylindrical water phantom, the CTP404 (sensitometry), and the CTP528 (line-pair) [Formula: see text] ® modules. To identify and remove individual events caused by fragmentation, the multistage energy detector of the scanner was adapted to function as a [Formula: see text] telescope. The use of the developed filter eliminated the otherwise arising ring artifacts in the HeCT reconstructed images. For the HeCT reconstructed images of a water phantom, the maximum RSP error was improved by almost a factor 8 with respect to unfiltered images in the simulation and a factor 10 in the experiment. Similarly, for the CTP404 module, the mean RSP accuracy improved by a factor 6 in both the simulation and the experiment when the filter was applied (mean relative error 0.40% in simulation, 0.45% in experiment). In the evaluation of the spatial resolution through the CTP528 module, the main effect of the filter was noise reduction. For both simulated and experimental images the spatial resolution was â¼4 lp cm-1. In conclusion, the novel filter developed for secondary fragments proved to be effective in improving the visual quality and RSP accuracy of the reconstructed images. With the filter, the pCT scanner is capable of accurate HeCT imaging.
Asunto(s)
Helio , Procesamiento de Imagen Asistido por Computador/métodos , Cintigrafía/métodos , Humanos , Método de Montecarlo , Fantasmas de Imagen , Cintigrafía/normasRESUMEN
PURPOSE: This experimental study is aimed at demonstrating, using a simple cylindrical water phantom, the feasibility of fluence-modulated proton computed tomography (FMpCT) by pencil beam scanning (PBS) proton computed tomography (pCT). METHODS: The phase II pCT prototype of the Loma Linda U. and U. C. Santa Cruz was operated using the PBS beam line of the Northwestern Medicine Chicago Proton Center. A 20 × 10 grid of 1.37 cm full width half maximum pencil beams (PB) equally spaced by 1 cm was used to acquire 45 projections in step and shoot mode. The PB pattern's fluence was modified to allow FMpCT scans with fluence modulation factors (FMF) of 50% and 20%. A central FMpCT region of interest (FMpCT-ROI) was used to define a high image quality region. Reconstructed images were evaluated in terms of relative stopping power (RSP) accuracy and noise using annular ROIs. The FMpCT dose savings were estimated by Monte Carlo (MC) simulation of the pCT acquisitions using beam phase space distributions. PBS pCT results with homogeneous fluence were additionally compared to broad beam results in terms of RSP accuracy and noise. RESULTS: PBS pCT scans with acceptable pileup were possible, and images were comparable to previously acquired broad beam pCT images in terms of both noise and accuracy. In the FMpCT-ROI, the noise and accuracy from full fluence (FF) scans were preserved. Dose savings of up to 60% were achieved at the object's edge when using FMF of 20%. CONCLUSION: In this study, we have demonstrated that PBS pCT scans can achieve equivalent accuracy as those obtained from broad beams. The feasibility of FMpCT scans was demonstrated; image accuracy and noise were successfully preserved in the central FMpCT-ROI chosen for this study, and dose reduction of up to 60% at the object's edge was realized.