RESUMEN
Photocatalytic hydrogen production offers an alternative pathway to establish a sustainable energy economy. While numerous photoactive materials exhibit potential for generating hydrogen from water, the synergy achieved by combining two different materials with complementary properties in the form of heterojunctions can significantly their photocatalytic activity. Our study describes the design and generation of the metal-organic framework-derived (MOF) metal oxide heterojunction composed of RuO2/N,S-TiO2. The RuO2/N,S-TiO2 is generated through the pyrolysis of MOFs, Ru- HKUST-1, and the amino-functionalized MIL-125-NH2. Among the various RuO2/N,S- TiO2 materials tested, the material characterized by the lowest RuO2 content, exhibited the highest hydrogen evolution rate, producing 10,761 µmol·hr-1·g-1 of hydrogen with an apparent quantum-yield of 10.0% in pure water. In addition to RuO2/N,S-TiO2, we generated two other MOF-derived metal-oxide heterojunctions, ZnO/N,S-TiO2 and In2O3/N,S-TiO2, leading to apparent quantum yields of 0.7% and 0.3%, respectively. The remarkable photocatalytic activity observed in RuO2/N,S-TiO2 is thought to be attributed to the synergistic effects arising from the combination of metallic properties inherent in the metal oxides, their band alignment, porosity, and surface properties inherited from the parent MOFs. The photocatalytic efficiency of RuO2/N,S-TiO2 was further demonstrated in actual water samples, producing hydrogen with a rate of 8,190 µmol·hr-1·g-1 in tap water.
RESUMEN
Traditional cathode chemistry of Li-ion batteries relies on the transport of Li-ions within the solid structures, with the transition metal ions and anions acting as the static components. Here, we demonstrate that a solid solution of F- and PO43- facilitates the reversible conversion of a fine mixture of iron powder, LiF, and Li3PO4 into iron salts. Notably, in its fully lithiated state, we use commercial iron metal powder in this cathode, departing from electrodes that begin with iron salts, such as FeF3. Our results show that Fe-cations and anions of F- and PO43- act as charge carriers in addition to Li-ions during the conversion from iron metal to a solid solution of iron salts. This composite electrode delivers a reversible capacity of up to 368 mAh/g and a specific energy of 940 Wh/kg. Our study underscores the potential of amorphous composites comprising lithium salts as high-energy battery electrodes.
RESUMEN
Argyrodite-type Li6 PS5 Cl (LPSCl) has attracted much attention as a solid electrolyte for all-solid-state batteries (ASSBs) because of its high ionic conductivity and good mechanical flexibility. LPSCl, however, has challenges of translating research into practical applications, such as irreversible electrochemical degradation at the interface between LPSCl and cathode materials. Even for Li-ion batteries (LIBs), liquid electrolytes have the same issue as electrolyte decomposition due to interfacial instability. Nonetheless, current LIBs are successfully commercialized because functional electrolyte additives give rise to the formation of stable cathode-electrolyte interphase (CEI) and solid-electrolyte interphase (SEI) layers, leading to supplementing the interfacial stability between electrolyte and electrode. Herein, inspired by the role of electrolyte additives for LIBs, trimethylsilyl compounds are introduced as solid electrolyte additives for improving the interfacial stability between sulfide-based solid electrolytes and cathode materials. 2-(Trimethylsilyl)ethanethiol (TMS-SH), a solid electrolyte additive, is oxidatively decomposed during charge, forming a stable CEI layer. As a result, the CEI layer derived from TMS-SH suppresses the interfacial degradation between LPSCl and LiCoO2 , thereby leading to the excellent electrochemical performance of Li | LPSCl | LiCoO2 , such as superior cycle life over 2000 cycles (85.0% of capacity retention after 2000 cycles).
RESUMEN
OBJECTIVE: Behavioral assessments that effectively predict sleep-wake states were tried in animal research. This study aimed to examine the prediction power of an infrared locomotion detector on the sleep-wake states in ICR (Institute Cancer Research) mice. We also explored the influence of the durations and ways of data processing on the prediction power. METHODS: The locomotor activities of seven male mice in home cages were recorded by infrared detectors. Their sleep-wake states were assessed by video analysis. Using the receiver operating characteristic curve analysis, the cut-off score was determined, then the area under the curve (AUC) values of the infrared motion detector that predicted sleep-wake states were calculated. In order to improve the prediction power, the four ways of data processing on the prediction power were performed by Matlab 2013b. RESULTS: In the initial analysis of raw data, the AUC value was 0.785, but it gradually reached to 0.942 after data summation. The simple data averaging and summation among four different methods showed the maximal AUC value. The 10-minute data summation improved sensitivity (0.889) and specificity (0.901) significantly from the baseline value (sensitivity 0.615; specificity 0.936) (p < 0.001). CONCLUSION: This study suggests that the locomotor activity measured by an infrared motion detector might be useful to predict the sleep-wake states in ICR mice. It also revealed that only simple data summation may improve the predictive power. Using daily locomotor activities measured by an infrared motion detector is expected to facilitate animal research related to sleep-wake states.
RESUMEN
Na-ion batteries are attractive as an alternative to Li-ion batteries because of their lower cost. Organic compounds have been considered as promising electrode materials due to their environmental friendliness and molecular diversity. Herein, aluminum-coordinated poly(tetrahydroxybenzoquinone) (P(THBQ-Al)), one of the coordination polymers, is introduced for the first time as a promising cathode for Na-ion batteries. P(THBQ-Al) is synthesized through a facile coordination reaction between benzoquinonedihydroxydiolate (C6O6H22-) and Al3+ as ligands and complex metal ions, respectively. Tetrahydroxybenzoquinone is environmentally sustainable, because it can be obtained from natural resources such as orange peels. Benzoquinonedihydroxydiolate also contributes to delivering high reversible capacity, because each benzoquinonedihydroxydiolate unit is capable of two electron reactions through the sodiation of its conjugated carbonyl groups. Electrochemically inactive Al3+ improves the structural stability of P(THBQ-Al) during cycling because of a lack of a change in its oxidation state. Moreover, P(THBQ-Al) is thermally stable and insoluble in nonaqueous electrolytes. These result in excellent electrochemical performance including a high reversible capacity of 113 mA h g-1 and stable cycle performance with negligible capacity fading over 100 cycles. Moreover, the reaction mechanism of P(THBQ-Al) is clarified through ex situ XPS and IR analyses, in which the reversible sodiation of CâO into C-O-Na is observed.
RESUMEN
BACKGROUND: To identify adverse renal effects due to air pollution derived from a cement plant in Korea. Urinary n-acetyl-B-glucosaminidase (U-NAG) levels in residents living near a cement plant were compared to those in a group who lived farther away from the plant. METHODS: From June to August 2013 and from August to November 2014, laboratory tests for U-NAG and heavy metal were conducted on 547 study participants. Based on the level of air pollution exposure, subjects were divided into the "less exposed group," (LEG) which consisted of 66 persons who lived more than 5 km away from the cement plant, the "more exposed group from the rural area" (MEG-R), which consisted of 272 persons, and the "more exposed group from downtown area" (MEG-D), which consisted of 209 persons who lived within a 1 km radius of the cement plant. U-NAG levels >5.67 U/L were defined as "higher U-NAG" levels. We compared the prevalence of higher U-NAG levels and estimated the adjusted odds ratio (OR) by air pollution exposure using a chi-square test and multiple logistic regression analysis. Further, we estimated the interaction between air pollution exposure and heavy metal exposure in renal toxicity. RESULTS: The OR of higher U-NAG levels by MEG-D and MEG-R compared to LEG was 2.13 (95 % CI 0.86-4.96) and 4.79 (95 CI 1.65-10.01), respectively. Urinary cadmium (U-Cd), urinary mercury (U-Hg), age, occupation, hypertension, and diabetes had a significant association with higher U-NAG levels. However, blood lead (B-Pb), sex, and smoking were not associated with higher U-NAG. Especially, concurrent exposure to heavy metals (U-Hg or/and U-Cd) and air pollution had an additive adverse effect. In the group with both 4th quartile heavy metal exposure (U-Cd or/and U-Hg) and air pollution exposure, the OR in MEG-R and MEG-D was 6.49 (95 % 1.42-29.65) and 8.12 (95 % CI 1.74-37.92), respectively, after adjustment for age, occupation, hypertension, diabetes. CONCLUSIONS: U-NAG levels seem to be affected by air pollution exposure as well as age, hypertension, diabetes, and even low levels of cadmium and low levels of mercury. Moreover, concurrent exposure to heavy metals and air pollution can have additive cytotoxic renal effects.
RESUMEN
BACKGROUND: To identify adverse pulmonary health effects due to air pollution derived from a cement plant in Korea. The emphysema prevalence in residents around a cement plant was compared to that in the group who live far away from the plant by chest films (PA and lateral view) and high-resolution computed tomography (HRCT) lung images. METHODS: From June to August in 2013 and from August to November in 2014, chest films and HRCT scan were conducted on residents over the age of 40 who lived around a cement plant. The residents were divided into two groups; a "more exposed group (MEG)" which consisted of 1,046 people who lived within a 1 km radius and a "less exposed group (LEG)" which consisted of 317 people who lived more than 5 km away from the same plant. We compared the emphysema prevalence and estimated the OR of this between the MEG and the LEG by using a chi-square and logistic regression on chest films and HRCT. RESULTS: The emphysema prevalence was 9.1 % in the LEG, 14.3 % in the MEG on chest films and 11.4 %, 17.8 % on the HRCT, respectively. The OR of the emphysema prevalence in MEG was 2.92 (95 % CI 1.77-4.83) on the chest films, 2.56 (95 % CI 1.64-3.99) on the HRCT after sex, age, body mass index (BMI), smoking history, residency period and firewood used history were adjusted. The OR in the less than 29 pack-years smoking history was 1.66 (95 % CI 0.92-3.06) and in the more than 30 pack-years was 3.05 (95 % CI 1.68-5.52) on the chest films, and was 1.68 (95 % CI 0.98-2.90), 2.93 (95 % CI 1.72-4.98) on the HRCT, respectively. CONCLUSION: The emphysema prevalence seems to be affected by the level of exposure to air pollution derived from the cement plant as well as sex, age, BMI, and smoking history in this study. Moreover, the OR of the case of the more exposed to the air pollution was similar to that of the case in smoking.
RESUMEN
OBJECTIVES: To identify adverse health effects due to air pollution derived from a cement plant in Korea. The ventilation impairment in residents around a cement plant was compared to another group through a pulmonary function test (PFT). METHODS: From June to August of 2013, both a pre and post-bronchodilator PFT was conducted on a "more exposed group (MEG)" which consisted of 318 people who lived within a 1 km radius of a cement plant and a "less exposed group (LEG)" which consisted of 129 people who lived more than 5 km away from the same plant. The largest forced expiratory volume in a one second (FEV1) reading and a functional residual capacity (FVC) reading were recorded after examining the data from all of the usable curves that were agreed upon as valid by PFT experts of committee of National Institute of Environmental Research. The global initiative for chronic obstructive lung disease (GOLD) criteria for COPD, defined the FEV1/FVC ratio < 0.7 as the obstructive type, and the FEV1/FVC ratio ⧠0.7 and FVC% predicted < 80% were as the restrictive type. The FVC% predicted value was estimated using Korean equation. We compared the proportion of lung function impairments between the MEG and the LEG by using a chi-square, and estimated the OR of obstructive and restrictive ventilation impairments by logistic regression. RESULTS: The obstructive type impairment proportion was 9.7% in the MEG, whereas it was 8.5% in the LEG. The restrictive type was 21.6% in the MEG which was more than the 12.4% of the LEG. The odds ratio (OR) of total ventilation impairment in the MEG was 2.63 (95% CI 1.50 ~ 4.61) compared to the LEG. The OR of obstructive type in the MEG was 1.60 (95% CI 0.70 ~ 3.65), the smoking history was 3.10 (CI 1.10 ~ 8.66) whereas OR of restrictive type in the MEG was 2.55 (95% CI 1.37 ~ 4.76), the smoking history was 0.75 (95% CI 0.35 ~ 1.60) after adjusting for sex and age. Level of exposure to particulate played a role in both types. However, it appeared to be a significant variable in restrictive type, while smoking history was also an important variable in obstructive type. CONCLUSION: Although this study is a limited cross-section study with a small number of subjects, ventilation impairment rate is higher in the MEG. There might be a possibility that it is due to long-term exposure to particulate dust generated by the cement plant.
RESUMEN
OBJECTIVE: To prevent the occurrence of CV events such as MI and stroke among professional drivers in Korea, bus drivers were compared to other occupations through the Framingham risk scoring system (FRS) or metabolic syndrome (MS) of cardiovascular disease (CVD) risk assessment methods. METHODS: In October 2012, a health examination survey was conducted for 443 male bus drivers in a big city. Their CVD risk factors were compared to those of a 'total employed' (A group) and 'crafts and machine operators' (B group) extracted from Fifth Korea National Health and Nutrition Examination Survey (KNHANES, 2010) data by using FRS and MS. We calculated proportions of the CVD risk factors distribution between bus drivers and the A, B groups by the bootstrapping method. The Odds ratio (OR) between CV event risk combining MS with CHD equivalent risk of FRS and occupational factors like shift patterns and professional driving duration/age ratios (PDAR) of bus drivers was calculated through multinominal logistic regression. RESULTS: The proportion of BMI ≥ 25 kg/m2 was 53.9% and waist circumference ≥ 90cm was 40.9% among bus drivers. Hypertension and MS prevalence of bus drivers was 53.3%, 49.9% which is higher than 17.6%, 22.6% in the A group and 19.7%, 23.8% in the B group respectively. OR of high CV event risk in alternate shift was 2.58 (95% CI 1.33~5.00) in comparison with double shift pattern and OR in PDAR ≥ 0.5 was 2.18 (95% CI 1.15~4.14). CONCLUSION: Middle aged male drivers in a big city of Korea stand a higher chance of developing CV event than other professions of the same age.
RESUMEN
Here, we report psychotic symptoms together with a right cerebellopontine-angle lesion. A37-year-old female patient presented with a trigeminal Schwannoma occupying the right cerebellopontine angle. Her psychotic symptoms included auditory hallucinations and delusions of persecution. T1- and T2-weighted images on magnetic resonance imaging (MRI) revealed hyperintense and hypointense areas in the right cerebellopontine angle, respectively. The clinical and neuroimaging reviews in this case suggest that sudden onset of psychotic symptoms at a mature age may be associated with a right cerebellopontine-angle lesion and that MRI should be used to evaluate possible organic bases in patients that present with psychosis.