Effect of hemicellulose hydrolysate addition on the dehydration and redispersion characteristic of cellulose nanofibrils.

Nanocellulose, owing to its environmentally friendly and unique attributes, is gaining traction in various industries. However, commercialization of nanocellulose faces challenges due to structural alterations during drying process, leading to irreversible aggregation. This study, inspired by wood's natural structure, introduces a cellulose nanofibril (CNF) drying system using hemicellulose hydrolysate (HH) as a capping agent. The addition of only 1 wt% of HH to the CNF suspension not only prevents aggregation among CNFs during dehydration and drying but also dramatically enhances the redispersion rate and dispersion stability of the dried CNFs. The redispersed CNF/HH suspension exhibits physicochemical properties comparable to the original CNF suspension before drying. This confirms that HH inhibits irreversible hydrogen bonding among CNFs, leading to the restoration of the nanostructure during redispersion. Moreover, HH in the CNF suspension after redispersion can be easily removed through a simple water rinsing process, highlighting HH as a highly suitable candidate for preventing aggregation of CNFs.

Lignin/PVA hydrogel with enhanced structural stability for cationic dye removal.

In this study, a lignin-based hydrogel for wastewater treatment was prepared by incorporating kraft lignin (KL) into a poly (vinyl alcohol) (PVA) matrix. The underwater structural stability of the KL-PVA hydrogel was guaranteed through physicochemical crosslinking, involving freeze-thaw process and chemical crosslinking reaction. The KL-PVA hydrogel displayed superior compressive characteristics compared to the original PVA hydrogel. This improvement was attributed to the chemical crosslinking and the reinforcing effect of the incorporated KL microparticles. The incorporation of anionic KL microparticles into the PVA three-dimensional network structure enhanced the cationic methylene blue (MB) and crystal violet (CV) adsorption efficiency of the prepared KL-PVA hydrogel. The MB adsorption results were well explained by pseudo-2nd order kinetics model and Langmuir isotherm model. Electrostatic forces, hydrogen bonding and π-π stacking interactions were the main adsorption mechanisms between cationic dyes and KL surfaces, indicating the potential of KL-PVA hydrogel as an effective adsorption material. Moreover, regulating the molecular weight of PVA not only prevented lignin leakage from the KL-PVA hydrogel but also elevated the KL content within the hydrogel, consequently improving its dye removal performance. For KL-PVA hydrogel with high molecular weight PVA, the MB and CV adsorption capacities were 193.8 mg/g and 190.0 mg/g, respectively.

Biodegradation behavior of acetylated lignin added polylactic acid under thermophilic composting conditions.

Acetylated lignin (AL) can improve compatibility with commercial plastic polymers compared to existing lignin and can be used as an effective additive for eco-friendly biocomposites. For this reason, AL can be effectively incorporated into polylactic acid (PLA)-based biocomposites, but its biodegradation properties have not been investigated. In this study, biodegradation experiments were performed under mesophilic and thermophilic conditions to determine the effect of AL addition on the biodegradation characteristics of PLA-based biocomposites. As a result, the PLA-based biocomposite showed a faster biodegradation rate in a thermophilic composting environment, which is higher than the glass transition temperature of PLA, compared to a mesophilic environment. 16S rDNA sequencing results showed that differences in microbial communities depending on mesophilic and thermophilic environments strongly affected the biodegradation rate of lignin/PLA biocomposites. Importantly, the addition of AL can effectively delay the thermophilic biodegradation of PLA biocomposites. As a result of tracking the changes in physicochemical properties according to the biodegradation period in a thermophilic composting environment, the main biodegradation mechanism of AL/PLA biocomposite hydrolysis. It proceeded with cleavage of the PLA molecular chain, preferential biodegradation of the amorphous region, and additional biodegradation of the crystalline region. Above all, adding AL can be proposed as an effective additive because it can minimize the decline in the mechanical properties of PLA and delay the biodegradation rate more effectively compared to existing kraft lignin (KL).

pH-sensitive cellulose/chitin nanofibrillar hydrogel for dye pollutant removal.

In this study, a pH-sensitive smart hydrogel was successfully prepared by combining a polyelectrolyte complex using biopolymeric nanofibrils. By adding a green citric acid cross-linking agent to the formed chitin and cellulose-derived nanofibrillar polyelectrolytic complex, a hydrogel with excellent structural stability could be prepared even in a water environment, and all processes were conducted in an aqueous system. The prepared biopolymeric nanofibrillar hydrogel not only enables rapid conversion of swelling degree and surface charge according to pH but can also effectively remove ionic contaminants. The ionic dye removal capacity was 372.0 mg/g for anionic AO and 140.5 mg/g for cationic MB. The surface charge conversion ability according to pH could be easily applied to the desorption of the removed contaminants, and as a result, it showed an excellent contaminant removal efficiency of 95.1 % or more even in the repeated reuse process 5 times. Overall, the eco-friendly biopolymeric nanofibrillar pH-sensitive hydrogel shows potential for complex wastewater treatment and long-term use.

Effect of chemically modified lignin addition on the physicochemical properties of PCL nanofibers.

In this study, a chemically modified lignin additive was successfully prepared to improve the physicochemical properties of biodegradable polycaprolactone (PCL)-based nanofibers. The molecular weight and surface functional group characteristics of lignin were effectively controlled through a solvent fractionation process using ethanol. Then, PCL-g-lignin was successfully synthesized by using ethanol-fractionated lignin as a platform for the PCL grafting process. Finally, PCL/PCL-g-lignin composite nanofibers were simply prepared by adding PCL-g-lignin to the PCL doping solution and performing a solution blow spinning process. The addition of PCL-g-lignin could dramatically improve the physical and chemical properties of PCL nanofibers, and in particular, the tensile strength (0.28 MPa) increased by approximately 280 % compared to the conventional PCL. In addition, the lignin moiety present in PCL-g-lignin was able to impart UV blocking properties to PCL nanofibers, and as a result, it was possible to effectively suppress the photolysis phenomenon that occurred rapidly in existing PCL nanofibers. Therefore, PCL-g-lignin may be widely used not only as a reinforcing agent of existing biodegradable nanofibers but also as a functional additive for UV protection.