Bisphenols in daily clothes from conventional and recycled material: evaluation of dermal exposure to potentially toxic substances.

Given the increasing concern about chemical exposure from textiles, our study examines the risks of dermal exposure to bisphenol A (BPA), bisphenol S (BPS), bisphenol B (BPB) and bisphenol F (BPF) from conventional and recycled textiles for adults, aiming to obtain new data, assess exposure, and evaluate the impact of washing on bisphenol levels. A total of 57 textile samples (33 from recycled and 24 from conventional material) were subjected to ultrasound-assisted extraction (UAE) followed by ultra-high performance liquid chromatography with tandem mass spectrometry analysis (UHPLC-MS/MS). The BPA and BPS concentrations varied widely (BPA: < 0.050 to 625 ng/g, BPS: 0.277-2,474 ng/g). The median BPA content in recycled textiles (13.5 ng/g) was almost twice as high as that of 7.66 ng/g in conventional textiles. BPS showed a median of 1.85 ng/g in recycled textiles and 3.42 ng/g in conventional textiles, indicating a shift from BPA to BPS in manufacturing practices. Simulated laundry experiments showed an overall reduction in bisphenols concentrations after washing. The study also assessed potential health implications via dermal exposure to dry and sweat-wet textiles compared to a tolerable daily intake (TDI) of 0.2 ng/kg bw/day for BPA set by the European Food Safety Authority (EFSA). Exposure from dry textiles remained below this threshold, while exposure from wet textiles often exceeded it, indicating an increased risk under conditions that simulate sweating or humidity. By finding the widespread presence of bisphenols in textiles, our study emphasises the importance of being aware of the potential risks associated with recycling materials as well as the benefits.

The occurrence of perfluoroalkyl substances (PFAS) in drinking water in the Czech Republic: a pilot study.

Drinking water is one of the main contributors to overall human exposure to per- and polyfluoroalkyl substances (PFAS), a broad group of environmental contaminants with arising concerns on the impact on human health; therefore, it is necessary to monitor its quality. Here, we present a solid-phase extraction-based method to determine 22 PFAS in water, using 100 mL of the sample. The instrumental analysis employing an ultra-high-performance liquid chromatography coupled with tandem mass spectrometry achieved low limits of quantification (0.025-0.25 ng/L). The validated method (recoveries 70-120% and repeatabilities ≤ 20% at tested concentrations (0.05, 0.1 and 0.5 ng/L)) was applied to 67 tap water and 31 bottled water samples collected in the Czech Republic. The most abundant compounds were perfluorononanoic acid (88% positives; 0.034-13.3 ng/L) and perfluoroheptanoic acid (23% positives; 0.035-0.106 ng/L), respectively. ∑PFAS in positive samples ranged from 0.029 to 300 ng/L (99% positives, median 2.34 ng/L) in tap water data and 0.033 to 4.48 ng/L (32% positives, median 0.097 ng/L) in bottled water samples. Current-use fluoroalkyl ethers, dodecafluoro-3H-4,8-dioxanonanoate and 11-chloroeicosafluoro-3-oxaundecane-1-sulfonate, were occasionally detected in tap. Based on the median data, PFAS intake by an adult from a tap or bottled water represented units of % of the tolerable weekly intake set by the European Food Safety Authority and therefore did not represent a severe risk. The described method and obtained first data on PFAS in the Czech drinking water provided a solid basis for an ongoing national study on the presence of PFAS in tap water.