Arginine methylation of caspase-8 controls life/death decisions in extrinsic apoptotic networks.

Procaspase-8 is a key mediator of death receptor (DR)-mediated pathways. Recently, the role of post-translational modifications (PTMs) of procaspase-8 in controlling cell death has received increasing attention. Here, using mass spectrometry screening, pharmacological inhibition and biochemical assays, we show that procaspase-8 can be targeted by the PRMT5/RIOK1/WD45 methylosome complex. Furthermore, two potential methylation sites of PRMT5 on procaspase-8, R233 and R435, were identified in silico. R233 and R435 are highly conserved in mammals and their point mutations are among the most common mutations of caspase-8 in cancer. The introduction of mutations at these positions resulted in inhibitory effects on CD95L-induced caspase-8 activity, effector caspase activation and apoptosis. In addition, we show that procaspase-8 can undergo symmetric di-methylation. Finally, the pharmacological inhibition of PRMT5 resulted in the inhibitory effects on caspase activity and apoptotic cell death. Taken together, we have unraveled the additional control checkpoint in procaspase-8 activation and the arginine methylation network in the extrinsic apoptosis pathway.

Modulation of extrinsic apoptotic pathway by intracellular glycosylation.

The importance of post-translational modifications (PTMs), particularly O-GlcNAcylation, of cytoplasmic proteins in apoptosis has been neglected for quite a while. Modification of cytoplasmic proteins by a single N-acetylglucosamine sugar is a dynamic and reversible PTM exhibiting properties more like phosphorylation than classical O- and N-linked glycosylation. Due to the sparse information existing, we have only limited understanding of how GlcNAcylation affects cell death. Deciphering the role of GlcNAcylation in cell fate may provide further understanding of cell fate decisions. This review focus on the modulation of extrinsic apoptotic pathway via GlcNAcylation carried out by O-GlcNAc transferase (OGT) or by other bacterial effector proteins.

Regulation of extrinsic apoptotic signaling by c-FLIP: towards targeting cancer networks.

The extrinsic pathway is mediated by death receptors (DRs), including CD95 (APO-1/Fas) or TRAILR-1/2. Defects in apoptosis regulation lead to cancer and other malignancies. The master regulator of the DR networks is the cellular FLICE inhibitory protein (c-FLIP). In addition to its key role in apoptosis, c-FLIP may exert other cellular functions, including control of necroptosis, pyroptosis, nuclear factor κB (NF-κB) activation, and tumorigenesis. To gain further insight into the molecular mechanisms of c-FLIP action in cancer networks, we focus on the structure, isoforms, interactions, and post-translational modifications of c-FLIP. We also discuss various avenues to target c-FLIP in cancer cells for therapeutic benefit.

Pharmacological targeting of c-FLIPL and Bcl-2 family members promotes apoptosis in CD95L-resistant cells.

The development of efficient combinatorial treatments is one of the key tasks in modern anti-cancer therapies. An apoptotic signal can either be induced by activation of death receptors (DR) (extrinsic pathway) or via the mitochondria (intrinsic pathway). Cancer cells are characterized by deregulation of both pathways. Procaspase-8 activation in extrinsic apoptosis is controlled by c-FLIP proteins. We have recently reported the small molecules FLIPinB/FLIPinBγ targeting c-FLIPL in the caspase-8/c-FLIPL heterodimer. These small molecules enhanced caspase-8 activity in the death-inducing signaling complex (DISC), CD95L/TRAIL-induced caspase-3/7 activation and subsequent apoptosis. In this study to increase the pro-apoptotic effects of FLIPinB/FLIPinBγ and enhance its therapeutic potential we investigated costimulatory effects of FLIPinB/FLIPinBγ in combination with the pharmacological inhibitors of the anti-apoptotic Bcl-2 family members such as ABT-263 and S63845. The combination of these inhibitors together with FLIPinB/FLIPinBγ increased CD95L-induced cell viability loss, caspase activation and apoptosis. Taken together, our study suggests new approaches for the development of combinatorial anti-cancer therapies specifically targeting both intrinsic and extrinsic apoptosis pathways.

Controlling Cell Death through Post-translational Modifications of DED Proteins.

Apoptosis is a form of programmed cell death, deregulation of which occurs in multiple disorders, including neurodegenerative and autoimmune diseases as well as cancer. The formation of a death-inducing signaling complex (DISC) and death effector domain (DED) filaments are critical for initiation of the extrinsic apoptotic pathway. Post-translational modifications (PTMs) of DED-containing DISC components such as FADD, procaspase-8, and c-FLIP comprise an additional level of apoptosis regulation, which is necessary to overcome the threshold for apoptosis induction. In this review we discuss the influence of PTMs of FADD, procaspase-8, and c-FLIP on DED filament assembly and cell death induction, with a focus on the 3D organization of the DED filament.

Dissecting DISC regulation via pharmacological targeting of caspase-8/c-FLIPL heterodimer.

Pharmacological targeting via small molecule-based chemical probes has recently acquired an emerging importance as a valuable tool to delineate molecular mechanisms. Induction of apoptosis via CD95/Fas and TRAIL-R1/2 is triggered by the formation of the death-inducing signaling complex (DISC). Caspase-8 activation at the DISC is largely controlled by c-FLIP proteins. However molecular mechanisms of this control have just started to be uncovered. In this study we report the first-in-class chemical probe targeting c-FLIPL in the heterodimer caspase-8/c-FLIPL. This rationally designed small molecule was aimed to imitate the closed conformation of the caspase-8 L2' loop and thereby increase caspase-8 activity after initial processing of the heterodimer. In accordance with in silico predictions, this small molecule enhanced caspase-8 activity at the DISC, CD95L/TRAIL-induced caspase activation, and subsequent apoptosis. The generated computational model provided further evidence for the proposed effects of the small molecule on the heterodimer caspase-8/c-FLIPL. In particular, the model has demonstrated that boosting caspase-8 activity by the small molecule at the early time points after DISC assembly is crucial for promoting apoptosis induction. Taken together, our study allowed to target the heterodimer caspase-8/c-FLIPL and get new insights into molecular mechanisms of its activation.

Long and short isoforms of c-FLIP act as control checkpoints of DED filament assembly.

The assembly of the death-inducing signaling complex (DISC) and death effector domain (DED) filaments at CD95/Fas initiates extrinsic apoptosis. Procaspase-8 activation at the DED filaments is controlled by short and long c-FLIP isoforms. Despite apparent progress in understanding the assembly of CD95-activated platforms and DED filaments, the detailed molecular mechanism of c-FLIP action remains elusive. Here, we further addressed the mechanisms of c-FLIP action at the DISC using biochemical assays, quantitative mass spectrometry, and structural modeling. Our data strongly indicate that c-FLIP can bind to both FADD and procaspase-8 at the DED filament. Moreover, the constructed in silico model shows that c-FLIP proteins can lead to the formation of the DISCs comprising short DED filaments as well as serve as bridging motifs for building a cooperative DISC network, in which adjacent CD95 DISCs are connected by DED filaments. This network is based on selective interactions of FADD with both c-FLIP and procaspase-8. Hence, c-FLIP proteins at the DISC control initiation, elongation, and composition of DED filaments, playing the role of control checkpoints. These findings provide new insights into DISC and DED filament regulation and open innovative possibilities for targeting the extrinsic apoptosis pathway.

Hot Melt Extrusion for Sustained Protein Release: Matrix Erosion and In Vitro Release of PLGA-Based Implants.

The design of biodegradable implants for sustained release of proteins is a complex challenge optimizing protein polymer interaction in combination with a mini-scale process which is predictive for production. The process of hot melt extrusion (HME) was therefore conducted on 5- and 9-mm mini-scale twin screw extruders. Poly(lactic-co-glycolic acid) (PLGA) implants were characterized for their erosion properties and the in vitro release of the embedded protein (bovine serum albumin, BSA). The release of acidic monomers as well as other parameters (pH value, mass loss) during 16 weeks indicated a delayed onset of matrix erosion in week 3. BSA-loaded implants released 17.0% glycolic and 5.9% lactic acid after a 2-week lag time. Following a low burst release (3.7% BSA), sustained protein release started in week 4. Storage under stress conditions (30°C, 75% rH) revealed a shift of erosion onset of 1 week (BSA-loaded implants: 26.9% glycolic and 9.3% lactic acid). Coherent with the changed erosion profiles, an influence on the protein release was observed. Confocal laser scanning and Raman microscopy showed a homogenous protein distribution throughout the matrix after extrusion and during release studies. Raman spectra indicated a conformational change of the protein structure which could be one reason for incomplete protein release. The study underlined the suitability of the HME process to obtain a solid dispersion of protein inside a polymeric matrix providing sustained protein release. However, the incomplete protein release and the impact by storage conditions require thorough characterization and understanding of erosion and release mechanisms.

Development of a pilot-scale manufacturing process for protein-coated microcrystals (PCMC): mixing and precipitation - part I.

A novel protein-coated microcrystal (PCMC) technology offers the possibility to produce dry protein formulations suitable for inhalation or, after reconstitution, for injection. Micron-sized particles are hereby produced by co-precipitation via a rapid dehydration method. Thus, therapeutic proteins can be stabilised and immobilised on crystalline carrier surfaces. In this study, the development of a continuous manufacturing process is described, which can produce grams to kilograms of PCMC. The process chain comprises three steps: mixing/precipitation, solvent reduction (concentration) and final drying. The process is published in two parts. This part describes the mixing and precipitation performed using continuous impingement jet mixers. Mixing efficiency was improved by dividing the anti-solvent flow into two or four jets, which were combined again inside the mixer to achieve an embracing of the aqueous solution (sandwich effect). The jets provided high energy dissipation rates. The anti-solvent jets (95% of the total volume) efficiently mixed the protein-carrier containing aqueous solution (5% of the total volume), which was demonstrated with computational fluid dynamics and the Villermaux-Dushman reaction. The improved mixing performance of the double jet impingement (DJI) or the quadruple jet impingement (QJI) mixers showed a positive effect on easily crystallising carriers (e.g. dl-valine) at laminar flow rates. The mixer and outlet tube bore size was 2.0-3.2 mm, because smaller sizes showed a high tendency to block the mixer. The mixing effect by impaction was sufficiently high in the flow rate range of 250-2000 mL/min, which corresponds to the transition from laminar to turbulent flow characteristics. At lower flow rates, mixing was enhanced by ultrasound. 50-80L PCMC suspension was readily produced with the QJI mixer.