Evaluation of Heavy Metal and Specific Trace Elements Levels Among Fast-Food Workers and Their Susceptibility to Atherosclerosis.

Fast-food workers in Iraq face significant health risks due to exposure to heavy metals from fumes and dust during cooking activities. Heavy metals, such as lead (Pb), cadmium (Cd), and nickel (Ni), are toxic to cells even at low concentrations and can cause health risks, including atherosclerosis, due to oxidative stress and reduced antioxidant activity. To the best of our knowledge, this is the first study assess the levels of heavy metals in fast-food workers and investigate their potential link to atherosclerosis development by monitoring the levels of copper (Cu), zinc (Zn), magnesium (Mg), manganese (Mn), and iron (Fe). A total of 120 male participants aged between 20 and 40 years were included in the study, with 40 fast-food workers, 40 patients with atherosclerosis, and 40 healthy individuals evaluated. The levels of Pb, Cd, Ni, Cu, Zn, Mg, Mn, and Fe in all blood samples were determined using atomic absorption spectrometry. Results showed that the fast-food worker group had significantly higher levels of Pb, Cd, Cu, and Fe compared to the healthy control group, with increases of 57%, 75%, 30%, and 55%, respectively. Conversely, their levels of Zn and Mg were significantly lower, decreasing by 15% and 16%, respectively. On the other hand, the atherosclerosis patients' group had significantly higher levels of Pb, Cd, Cu, and Fe, with increases of 47%, 74%, 34%, and 28%, respectively, as well as significantly lower levels of Zn and Mg, decreasing by 17% and 21%, respectively, compared to the control group. These findings suggest that fast-food workers are at risk of developing atherosclerosis due to exposure to high levels of heavy metals and imbalances in essential trace elements. The results showed a significant increase in the levels of Pb and Cd in the sera of these workers, which was expected because of the long duration and high intensity of exposure to toxic heavy metals. This is a serious indicator that must be considered, as it has been previously established that increased levels of Pb and Cd in the body are linked to the risk of atherosclerosis. Additionally, an association between Pb and Cd levels and an imbalance in trace element levels (Cu, Zn, Mg, and Fe) were observed. The Implementation of stricter regulations and guidelines for maintaining cleanliness and safety in fast-food restaurants may be crucial for protecting workers and preventing long-term health complications.

A comparative study of serum Zn, Cu, Mg, Mn, Cr, and Fe levels and their association with the vulnerability of Iraqi COVID-19 patients.

BACKGROUND: For the immune system to protect the body from infectious diseases such as COVID-19, it needs the ideal amount of vital trace elements. Trace element levels, especially, zinc (Zn), copper (Cu), magnesium (Mg), manganese (Mn), chromium (Cr), and iron (Fe) levels, may affect how sensitive an individual is to COVID-19 and other viruses. The current study evaluated the level of those trace elements during stays in the isolation center and investigated their association with vulnerability to COVID-19. METHODS: A total of 120 individuals, 49 males and 71 females aged between 20 and 60 years, were included in this study. Forty individuals infected with COVID-19, 40 individuals who had recovered from it, and 40 healthy individuals, were all evaluated and studied. By using a flame atomic absorption spectrophotometer, levels of Zn, Cu, and Mg were assessed for all samples, whereas levels of Mn, and Cr were determined by a flameless atomic absorption spectrophotometer. RESULTS: The infected individuals had significantly lower levels of Zn, Mg, Mn, Cr, and Fe than recovered individuals and healthy control individuals (P < 0.0001). On the other hand, the total number of infected patients was found to have much higher levels of Cu than those in the recovered group and the control group. For the recovered and healthy control groups, no significant differences were observed in the levels of trace elements (P > 0.05), except for Zn (P < 0.01). Also, the findings indicated no association of trace elements with age and BMI (P > 0.05). CONCLUSION: These results show that an imbalance in the levels of essential trace elements could be associated with increasing the risk of COVID-19 infection. However, additional thorough research of greater scope is required considering the severity of the infection.

Current status of structural studies of proteins originating from Arachnida.

Arthropods from class Arachnida constitute a large and diverse group with over 100,000 described species, and they are sources of many proteins that have a direct impact on human health. Despite the importance of Arachnida, few proteins originating from these organisms have been characterized in terms of their structure. Here we present a detailed analysis of Arachnida proteins that have their experimental structures determined and deposited to the Protein Data Bank (PDB). Our results indicate that proteins represented in the PDB are derived from a small number of Arachnida families, and two-thirds of Arachnida proteins with experimental structures determined are derived from organisms belonging to Buthidae, Ixodidae, and Theraphosidae families. Moreover, 90% of the deposits come from just a dozen of Arachnida families, and almost half of the deposits represent proteins originating from only fifteen different species. In summary, our analysis shows that the structural analysis of proteins originating from Arachnida is not only limited to a small number of the source species, but also proteins from this group of animals are not extensively studied. However, the interest in Arachnida proteins seems to be increasing, which is reflected by a significant increase in the related PDB deposits during the last ten years.

Material Properties and Cell Compatibility of Photo-Crosslinked Sericin Urethane Methacryloyl Hydrogel.

There is a need to develop novel cytocompatible hydrogels for cell encapsulation and delivery in regenerative medicine. The objective of this work was to synthesize isocyanato ethyl methacryloyl-functionalized sericin and determine its material properties as a natural hydrogel for the encapsulation and delivery of human mesenchymal stem cells (MSCs) in regenerative medicine. Sericin extracted from silk cocoons was reacted with 2-isocyanatoethyl methacrylate (IEM) or methacrylic anhydride (MA) to produce sericin urethane methacryloyl (SerAte-UM) or sericin methacryloyl (SerAte-M, control) biopolymers, respectively. The hydrogels produced by photo-crosslinking of the biopolymers in an aqueous solution were characterized with respect to gelation kinetics, microstructure, compressive modulus, water content, degradation, permeability, and viability of encapsulated cells. The secondary structure of citric acid-extracted sericin was not affected by functionalization with IEM or MA. SerAte-UM hydrogel was slightly more hydrophilic than SerAte-M. The gelation time of SerAte-UM hydrogel decreased with an increasing degree of modification. The photo-polymerized SerAte-UM hydrogel had a highly porous, fibrous, honeycomb microstructure with an average pore size in the 40−50 µm range. The compressive modulus, swelling ratio, and permeability of SerAte-UM hydrogel depended on the degree of modification of sericin, and the mass loss after 21 days of incubation in aqueous solution was <25%. Both SerAte-UM and SerAte-M hydrogels supported viability and growth in encapsulated MSCs. The SerAte-UM hydrogel, with its higher hydrophilicity compared to SerAte-M, is promising as a matrix for encapsulation and delivery of stem cells in tissue engineering.

Material properties and cell compatibility of poly(γ-glutamic acid)-keratin hydrogels.

Given the great demand for biopolymer and protein-based products from renewable resources, synthesis of a keratin-based hydrogel is presented herein. In this work, a novel hydrogel of poly(γ-glutamic acid) (γ-PGA) and keratin was synthesized through facile EDC·HCl/HOBt chemistry. Since keratin main chain is rich in amino side groups, carboxyl groups in γ-PGA were crosslinked with multi terminated amine groups in keratin. In the following, the hydrogel characteristics, including swelling ratio (2010% at molar ratio of HOBt/EDC = 0.105), in vitro degradation and mass loss (about 20% at day 21 for the aforementioned sample), chemical decomposition and the rheological properties were investigated. The chemical activator agents, enhanced the elastic modulus of swollen hydrogel from around 1000 to 4000 Pa by increasing the crosslinking degree. Despite good biocompatibility for cell growth, some kind of self-assembled keratin hydrogels are not suitable for microscopic observation while the γ-PGA-Keratin hydrogel in our study is transparent. The γ-PGA-Keratin hydrogels possess significant features of rapid hydrogel formation in seconds, maximum swelling ratio of about 2500% maximum elastic modulus (stiffness) of about 4.5 kPa (for the swollen sample) with controllable matrix pore size. For further application, the biocompatibility of the γ-PGA-Keratin hydrogel was assessed by live/dead assay. Recent studies have demonstrated the effect of hydrogel porosity, water absorbing and stiffness on cell spreading, proliferation and differentiation of mesenchymal stem cells. Bone marrow mesenchymal stem cells could be differentiated into various cell fates depending on the elastic modulus of materials they are cultured on. We carried out a statistical study (to skip the cell work labor) to predetermine the proper working span in which we can gain a hydrogel to cover all features needed to be applied for some application like cartilage repair.

Development of microparticles for controlled release of resveratrol to adipose tissue and the impact of drug loading on particle morphology and drug release.

Resveratrol is a small molecule produced by various plants with a remarkable range of beneficial functions in animals. One of these is stimulating signaling pathways in adipose tissue that protect against obesity. Unfortunately, resveratrol suffers from poor bioavailability that inhibits its accumulation in target tissues, including fat, thus hindering the realization of its therapeutic potential. To address this, we are developing biodegradable microparticles as drug depots for controlled release of resveratrol within fat. In this study, resveratrol was encapsulated into poly(lactide-co-glycolide) microparticles using an oil-in-water emulsion/solvent evaporation technique. The oil phase consisted of resveratrol and poly(lactide-co-glycolide) dissolved in a mixture of dichloromethane and ethanol; meanwhile, the aqueous phase contained poly(vinyl alcohol) as the emulsifier. Increasing ethanol's volume ratio increased resveratrol's solubility in the oil phase and particle drug loading. The maximal loading achieved was 65 µg/mg (6.5%) and occurred when the ethanol to dichloromethane ratio was 1:3. Under these conditions, particles exhibited ruffled surfaces, which resulted in variable drug release over the first three days of a six-week release assay. By decreasing resveratrol and ethanol in the oil phase and increasing poly(vinyl alcohol) in the aqueous phase, smooth particles were achieved, but they suffered a 15-25-fold decrease in drug loading depending on size. Small particles exhibited higher drug loading and burst drug release compared to larger particles because of their higher specific surface area. Utilizing mild chemistry, we functionalized poly(vinyl alcohol) with fluorescein isothiocyanate and demonstrated that encapsulation of resveratrol in the particle decreases the amount of fluorescent polymer on the particle surface, suggesting resveratrol displaces the emulsifier during particle formation. Taken together, resveratrol can be encapsulated into poly(lactide-co-glycolide) microparticles, but it accumulates at the particle surface impacting drug loading, surface roughness, and drug release.

Plasmin-Cleavable Nanoparticles for On-Demand Release of Morphogens in Vascularized Osteogenesis.

The objective of this work was to engineer self-assembled nanoparticles (NPs) for on-demand release of bone morphogenetic protein-2 (BMP2) and vascular endothelial growth factor (VEGF) in response to enzymes secreted by the migrating human mesenchymal stem cells (hMSCs) and human endothelial colony forming cells (ECFCs) to induce osteogenesis and vasculogenesis. Gene expression profiling experiments revealed that hMSCs and ECFCs, encapsulated in osteogenic/vasculogenic hydrogels, expressed considerable levels of plasminogen, urokinase plasminogen activator and its receptor uPAR, and tissue plasminogen activator. Therefore, the plasmin-cleavable lysine-phenylalanine-lysine-threonine (KFKT) was used to generate enzymatically cleavable NPs. The acetyl-terminated, self-assembling peptide glycine-(phenylalanine)3GFFF-ac and the plasmin-cleavable GGKFKTGG were reacted with the cysteine-terminated CGGK(Fmoc/MTT) peptide through the MTT and Fmoc termini, respectively. The difunctional peptide was conjugated to polyethylene glycol diacrylate (PEGDA) with molecular weights (MW) ranging from 0.5 to 7.5 kDa, and the chain ends of the PEG-peptide conjugate were terminated with succinimide groups. After self-assembly in aqueous solution, BMP2 was grafted to the self-assembled, plasmin-cleavable PEG-based (PxSPCP) NPs for on-demand release. The NPs' stability in aqueous solution and that of the grafted BMP2 were strongly dependent on PEG MW. P2SPCP NPs showed high particle size stability, BMP2 grafting efficiency, grafted protein stability, and high extent of osteogenic differentiation of hMSCs. The localized and on-demand release of BMP2 from PxSPCP NPs coencapsulated with hMSCs in the linear polyethylene glycol-co-lactide acrylate patterned hydrogel with microchannels encapsulating hMSCs + ECFCs and VEGF-conjugated nanogels resulted in the highest extent of osteogenic and vasculogenic differentiation of the encapsulated cells compared to directly added BMP2/VEGF. The on-demand release of BMP2 from PxSPCP NPs not only enhances osteogenesis and vasculogenesis but also potentially reduces many undesired side effects of BMP2 therapy in bone regeneration.

Material and regenerative properties of an osteon-mimetic cortical bone-like scaffold.

The objective of this work was to fabricate a rigid, resorbable and osteoconductive scaffold by mimicking the hierarchical structure of the cortical bone. Aligned peptide-functionalize nanofiber microsheets were generated with calcium phosphate (CaP) content similar to that of the natural cortical bone. Next, the CaP-rich fibrous microsheets were wrapped around a microneedle to form a laminated microtube mimicking the structure of an osteon. Then, a set of the osteon-mimetic microtubes were assembled around a solid rod and the assembly was annealed to fuse the microtubes and form a shell. Next, an array of circular microholes were drilled on the outer surface of the shell to generate a cortical bone-like scaffold with an interconnected network of Haversian- and Volkmann-like microcanals. The CaP content, porosity and density of the bone-mimetic microsheets were 240 wt%, 8% and 1.9 g/ml, respectively, which were close to that of natural cortical bone. The interconnected network of microcanals in the fused microtubes increased permeability of a model protein in the scaffold. The cortical scaffold induced osteogenesis and vasculogenesis in the absence of bone morphogenetic proteins upon seeding with human mesenchymal stem cells and endothelial colony-forming cells. The localized and timed-release of morphogenetic factors significantly increased the extent of osteogenic and vasculogenic differentiation of human mesenchymal stem cells and endothelial colony-forming cells in the cortical scaffold. The cortical bone-mimetic nature of the cellular construct provided balanced rigidity, resorption rate, osteoconductivity and nutrient diffusivity to support vascularization and osteogenesis.

Regenerative Scar-Free Skin Wound Healing.

IMPACT STATEMENT: Millions of people every year develop scars in response to skin injuries after surgery, trauma, or burns with significant undesired physical and psychological effects. This review provides an update on engineering strategies for scar-free wound healing and discusses the role of different cell types, growth factors, cytokines, and extracellular components in regenerative wound healing. The use of pro-regenerative matrices combined with engineered cells with less intrinsic potential for fibrogenesis is a promising strategy for achieving scar-free skin tissue regeneration.

Sequential Zonal Chondrogenic Differentiation of Mesenchymal Stem Cells in Cartilage Matrices.

IMPACT STATEMENT: The higher regenerative capacity of fetal articular cartilage compared with the adult is rooted in differences in cell density and matrix composition. We hypothesized that the zonal organization of articular cartilage can be engineered by encapsulation of mesenchymal stem cells in a single superficial zone-like matrix followed by sequential addition of zone-specific growth factors within the matrix, similar to the process of fetal cartilage development. The results demonstrate that the zonal organization of articular cartilage can potentially be regenerated using an injectable, monolayer cell-laden hydrogel with sequential release of growth factors.

Devitalized Stem Cell Microsheets for Sustainable Release of Osteogenic and Vasculogenic Growth Factors and Regulation of Anti-Inflammatory Immune Response.

The objective of this work was to investigate the effect of devitalized human mesenchymal stem cells (hMSCs) and endothelial colony-forming cells (ECFCs) seeded on mineralized nanofiber microsheets on protein release, osteogenesis, vasculogenesis, and macrophage polarization. Calcium phosphate nanocrystals were grown on the surface of aligned, functionalized nanofiber microsheets. The microsheets were seeded with hMSCs, ECFCs, or a mixture of hMSCs+ECFCs, cultured for cell attachment, differentiated to the osteogenic or vasculogenic lineage, and devitalized by lyophilization. The release kinetic of total protein, bone morphogenetic protein-2 (BMP2), and vascular endothelial growth factor (VEGF) from the devitalized microsheets was measured. Next, hMSCs and/or ECFCs were seeded on the devitalized cell microsheets and cultured in the absence of osteo-/vasculo-inductive factors to determine the effect of devitalized cell microsheets on hMSC/ECFC differentiation. Human macrophages were seeded on the microsheets to determine the effect of devitalized cells on macrophage polarization. Based on the results, devitalized undifferentiated hMSC and vasculogenic-differentiated ECFC microsheets had highest sustained release of BMP2 and VEGF, respectively. The devitalized hMSC microsheets did not affect M2 macrophage polarization while vascular-differentiated, devitalized ECFC microsheets did not affect M1 polarization. Both groups stimulated higher M2 macrophage polarization compared to M1.

Synthesis and Characterization of Photo-Cross-Linkable Keratin Hydrogels for Stem Cell Encapsulation.

The objective of this work was to synthesize an injectable and photopolymerizable hydrogel based on keratin extracted from poultry feather for encapsulation and delivery of stem cells in tissue regeneration. Since feather keratin is rich in cysteine residue, allylation of sulfhydryl groups was used for functionalization of keratin. Keratin was extracted from feather barbs by reducing the disulfide bonds in cysteine residues to sulfhydryl groups (-SH). Next, the free thiol groups were converted to dehydroalanine (Dha) by oxidative elimination using O-(2,4,6-trimethylbenzenesulfonyl) hydroxylamine. Then, the Dha moieties were converted to s-allyl cysteine by reaction with allyl mercaptan to produce keratin allyl thioether (KeratATE) biopolymer. Human mesenchymal stem cell (hMSCs) were suspended in the aqueous solution of KeratATE, injected into a mold, and photopolymerized to generate a KeratATE hydrogel encapsulating hMSCs. The freeze-dried photo-cross-linked KeratATE hydrogels had a porous, interconnected, honeycomb microstructure with pore sizes in the 20-60 µm range. The compressive modulus of the hydrogels ranged from 1 to 8 kPa depending on KeratATE concentration. KeratATE hydrogels had <5% mass loss in collagenase solution after 21 days of incubation, whereas the mass loss was 15% in trypsin solution. Degradation of KeratATE hydrogel was strongly dependent on trypsin concentration but independent of collagenase. hMSCs proliferated and adopted an elongated spindle-shape morphology after seeding on KeratATE hydrogel. KeratATE hydrogel supported differentiation of the encapsulated hMSCs to the osteogenic and chondrogenic lineages to the same extent as those hMSCs encapsulated in gelatin methacryloyl hydrogel. The results suggest that keratin allyl thioether hydrogel with controllable degradation is a viable matrix for encapsulation and delivery of stem cells in tissue regeneration.