Wisdom Tooth Autotransplantation for the Missing Maxillary Central Incisors Using a 3D-Printed Replica: A Case Report.

In this case report, we describe a 19-year-old man who underwent an autotransplantation of a lower third molar into the extracted region of his upper central incisors. Due to trauma, the patient's upper right and left central incisors had been extracted. He visited our clinic and requested to perform autotransplantation of his own teeth into the upper central incisor part because he wanted to use his natural teeth. So, we decided to extract his lower right third molar and autotransplant it into the extraction part of the upper central incisors. Immediately after extraction of the lower right third molar, the tooth was autotransplanted into the upper anterior region using a 3D-printed resin replica of the donor tooth and artificial sockets of the recipient site. Then, the root canal treatment was performed, and a temporary crown was set. Next, orthodontic treatment was done to flatten the curve of Spee. After completing the orthodontic treatment, a final prosthodontic restoration was set on the autotransplanted tooth. Four years later, the autotransplanted tooth remained stable with a healthy periodontium. This case demonstrates that if a patient has a request to use their natural teeth, autotransplantation of a wisdom tooth into the anterior region can be a useful method to replace the missing teeth.

Effect of laser engraving on shear bond strength of polyetheretherketone to indirect composite and denture-base resins.

Background/purpose: Polyetheretherketone (PEEK) is a highly sought-after thermoplastic due to its exceptional mechanical properties and biocompatibility. However, bonding PEEK to indirect composite resin (ICR) or denture-based resin (DBR) can be challenging. Laser engraving technology has shown potential to improve bonding for other materials; thus, this study aims to evaluate its effectiveness for PEEK. Materials and methods: The experiment involved preparing ingot-shaped PEEK samples, which were then categorized into four groups based on the treatment method employed: without treatment, air abrasion, sulfuric acid etching, and laser engraving (LS). Subsequently, the samples were bonded to ICR or DBR, and their shear bond strength (SBS) was tested with or without thermocycling using a universal testing machine. Furthermore, the failure mode was observed, with statistical analyses conducted to compare the results. Results: The grid-like microslit structure of LS group displayed the highest SBS for bonding PEEK to ICR or DBR (P < 0.05). During the bonding of PEEK to ICR, resin residue and penetration into the microslits were frequently observed in the LS group, indicating cohesive failure. However, when PEEK was bonded to DBR, mixture failure was frequently observed without thermocycling. After thermocycling, only the LS group showed cohesive failure, while the majority of specimens exhibited mixture failure. Conclusion: Laser engraving significantly improves the SBS between PEEK and both ICR and DBR. Furthermore, it was observed that resin had penetrated the microslits, indicating that laser engraving has great potential as a surface treatment method.

Autotransplantation of a Tooth Cryopreserved Over 11 Years Using a Programmed Freezer With a Magnetic Field: A Case Report.

This case report shows an autotransplantation of the lower right cryopreserved third molar into the extraction socket of the lower right first molar. Due to deep caries of the lower right first molar, the mesial root of this tooth was extracted. The patient asked to keep the distal root of the lower right first molar even if the root can survive only for a short period. So, a fixed partial denture supported by the lower right second premolar and the distal root of the lower right first molar was set. However, it was supposed that the distal root of the lower right first molar as an abutment tooth had a poor prognosis. Therefore, we also extracted the lower right third molar and cryopreserved to prepare autotransplantation if the lower right first molar has to be removed in the future. At first, the extracted third molar was frozen using a programmed freezer with a magnetic field named "Cells Alive System" (CAS) freezer, which was developed for tissue cryopreservation, and then, cryopreserved in the -150°C deep freezer. Eleven years later from the cryopreservation of the third molar, the lower right first molar showed root fracture. So, we extracted the lower right first molar and autotransplanted the cryopreserved third molar. Three years later, the autotransplanted tooth continued to be stable with healthy periodontium. The present case revealed that autotransplantation of a long-term cryopreserved tooth in a CAS freezer is a variable method to replace missing teeth.

Entire Dental Arch Mesial Movement after Extraction of Maxillary Right Central Incisor due to Root Fracture Treated with Temporary Anchorage Devices.

This case report describes a 19-year-old woman with skeletal Class I crowding and an unsalvageable maxillary right central incisor. She visited our clinic with the chief complaint of mobility of the maxillary right central incisor due to a traffic accident. After extraction of the maxillary right central incisor, the space was closed orthodontically. All the maxillary right teeth were moved mesially with an elastic chain attached to a palatal lever arm which was connected to palatal temporary anchorage devices (TADs). After orthodontic treatment had been completed, the maxillary right lateral incisor and peg-shaped left lateral incisor were restored with a porcelain laminate veneer. The maxillary right canine was morphologically reshaped and built up with composite resin. Consequently, esthetically ideal occlusion and functional lateral guidance with uncontacted molars were obtained. These results show that mesial movement of the entire dental arch with TADs is a useful orthodontic treatment option in patients in whom the maxillary central incisor has been extracted.

The Physiological Function of Deglutition and Swallowing in Patients With Maxillary Protrusion After Mandibular Advancement.

The objective of this study was to determine the tongue-palatal contact changes in patients with skeletal maxillary protrusion after sagittal split ramus osteotomy (SSRO) during swallowing. In this study, 15 patients with maxillary protrusion and 10 normal subjects participated. Before and 3 months after surgery, tongue-palatal contact patterns during swallowing of patients with maxillary protrusion as well as controls were evaluated by electropalatography. The electrode contact number in the alveolar, palatal, and velar parts was examined. The swallowing duration of each phase was also evaluated. In the lateral area of the velar part, incomplete electrode contact was shown at 0.3 seconds in patients with maxillary protrusion. The electrode contact number in the velar part at 0.3 seconds before tongue-palatal complete contact was significantly less in the preoperative patients compared with the controls ( P < 0.05). A small increase in the electrode contact number of the velar part was shown in the postoperative patients at 0.3 and 0.2 seconds before tongue-palatal complete contact ( P < 0.05). The pharyngeal phase duration was significantly larger in the patients with maxillary protrusion before SSRO compared with the controls ( P < 0.05). After SSRO, the pharyngeal phase duration was significantly shortened. It was shown that the tongue-palatal contact pattern during swallowing in patients with maxillary protrusion improved after orthognathic surgery, and the pharyngeal phase duration was also shortened. It is suggested that the changes in the mesiodistal mandibular position by orthognathic surgery can improve tongue posture and movement during swallowing.

Camouflage Correction of Skeletal Class III Severe Open Bite with Tooth Ankylosis Treated by Temporary Anchorage Devices: A Case Report.

Tooth ankylosis is a disorder characterized by the fusion of tooth and alveolar bone. This case report describes the treatment of a severe open bite due to tooth ankylosis. A 14-year-old female patient with a chief complaint of masticatory dysfunction was diagnosed with skeletal Class III severe anterior open bite and tooth ankylosis. She visited our university hospital with a chief complaint of an anterior open bite. After the surgical luxation of the ankylosed maxillary right central incisor, the tooth was orthodontically retracted using a nickel-titanium wire. The right mandibular lateral incisor and canine were luxated and retracted using intermaxillary elastics from a temporary anchorage device (TAD), which was inserted in the opposite jaw. During the treatment, skeletal Class III malocclusion deteriorated due to anterior growth of the mandible. Therefore, TADs were inserted into the retromolar pad on both sides of the mandible and retracted into the mandibular dental arch. Although the mandibular right canine was luxated several times, it could not be brought to the occlusal line, and was thus extracted; the extraction space was replaced with a prosthesis. Consequently, a normal overjet and overbite with a straight profile were achieved. Extrusion of ankylosed teeth by intermaxillary elastics from a TAD is a valid treatment option for patients with severe open bites.

Correction of Severe Skeletal Class II High Angle with Mandibular Retrusion and Gummy Smile by Double-Jaw Surgery.

This report describes the treatment of severe skeletal Class II malocclusion in a young woman with a gummy smile and pronounced lower anterior facial height. Overjet and overbite were +12.0 mm and -1.0 mm, respectively. Cephalometric analysis revealed inferior positioning of the maxilla and severe mandibular retrusion with clockwise rotation. Both the upper and lower anterior teeth showed labial inclination. Based on a diagnosis of a skeletal Class II high angle with mandibular retrusion and a gummy smile, double-jaw orthognathic surgeries for upper and lower premolar extraction were chosen to gain ideal occlusion and an improvement in the esthetic facial profile. Le Fort I osteotomy was performed to move the anterior and posterior teeth upward by 4.0 mm and achieve mandibular counterclockwise rotation. Short lingual sagittal split ramus osteotomy was performed to move the mandible forward by 3.0 mm. As a result, normal overjet and overbite were achieved together with a straight profile and a good smile. After surgery, electromyographic evaluation of anterior temporal muscle activity showed an improvement in the percentage overlapping coefficient value (a symmetric index of bilateral muscle activity) from 28.1% to 63.2% compared to at pre-treatment. The pattern of jaw movement also showed an improvement. These results suggest that orthognathic surgery in skeletal Class II cases can improve not only malocclusion and the skeletal relationship of the jaws, but also masticatory function and jaw movement.

Influence of dental abrasives on surface roughness, gloss, and color of titanium.

PURPOSE: The influence of three dental abrasives on the surface roughness, glossiness, and color of titanium (Ti) after mechanical polishing was investigated. METHODS: The specimens were divided into groups, referred to as SM, SR, and TP, to distinguish the different polishing processes. SM: rubber polishing using a rubber point containing SiC abrasive particles at 20,000 rpm, followed by gloss polishing; SR: rubber polishing using a rubber point containing Al2O3 abrasive particles at 20,000 rpm, followed by gloss polishing; TP: rubber polishing using a rubber point containing TiO2 abrasive particles at 6,000 rpm, followed by gloss polishing. Gloss polishing was carried out at 10,000 rpm using a leather buffing wheel. Measurements to evaluate the surface conditions of Ti were performed after each polishing process. RESULTS: There were no significant differences in the Ra and glossiness values between the SM and TP groups; these specimens were not as smooth and glossy as the SR group. The SM group showed relatively high values of lightness and chroma after gloss polishing. CONCLUSION: Rubber polishing with abrasives containing SiC or TiO2 particles before gloss polishing did not achieve appropriate surface conditions on Ti.

Lansoprazole and zoledronate delays hard tissue healing of tooth extraction sockets in dexamethasone-treated mice.

Proton pump inhibitors (PPIs) are among the most commonly prescribed medicines for the management of acid-related gastrointestinal diseases. Osteonecrosis of the jaw (ONJ) is a serious adverse event that is associated with the use of antiresorptive and antiangiogenic agents. According to previous clinical reports, the use of PPIs contributes to the pathogenesis of severe ONJ that requires surgery. Here, we investigated the effects of lansoprazole (LP) or LP in combination with zoledronate (ZOL) on ONJ development in mice. C57BL/6J mice were administered ZOL (125 µg/kg intravenously, twice weekly) and/or LP (10 mg/kg intraperitoneally; 3 weeks of 3 consecutive days followed by 1 day off). One week after initiation of the study, the first molar was atraumatically extracted. Concurrently with ZOL administration, dexamethasone (Dex) was administered (5 mg/kg intraperitoneally, twice weekly). Micro-computed tomography and histological evaluation were performed to characterize femoral structures, tooth extraction sockets, and osteonecrosis areas. The results showed that ZOL/Dex significantly increased bone mass compared to saline/Dex, while the simultaneous administration of LP and ZOL/Dex diminished the ZOL-induced enhancement of bone mass. In the alveolar bone around the tooth extraction socket, necrotic bone was significantly increased in the LP/Dex group compared to the saline/Dex group. However, no signs of more severe ONJ-like lesions were observed following combined administration of LP and ZOL/Dex, other than an increase in the number of non-attached TRAP-positive cells. Our findings in a mouse model suggest that LP use can be a risk factor for the development of ONJ.

Functional regulation of osteoblastic MC3T3E-1 cells by hyperbaric oxygen treatment.

OBJECTIVES: The purpose of the present study was to examine the influence of hyperbaric oxygen (HBO) on the function of osteoblastic MC3T3-E1 cells. DESIGN: Murine MC3T3-E1 cells were exposed to HBO treatment (at 2.5 absolute atmospheric pressure with 100% oxygen, 90 min per day) for 28 days. Alkaline phosphatase (ALP) staining, activity, and calcium (Ca) content were measured. Gene expression of vascular endothelial growth factor (VEGF), basic fibroblast growth factor (bFGF), hypoxia-inducible factor-1α (HIF-1α), type 1 collagen (COL1), and osteocalcin (OCN) was assessed using real-time quantitative polymerase chain reaction after a single HBO exposure for 1.5, 6, and 12 h. Furthermore, adenosine triphosphate (ATP) levels were measured using a luminescent cell viability assay. RESULTS: ALP activity and Ca content were higher in the HBO group compared to those in the control group. Gene expression of bFGF, COL1, and OCN was upregulated in the HBO group; however, that of VEGF and HIF-1α significantly decreased in the HBO group in comparison with that in the control group. ATP levels were significantly higher in the HBO group compared to those in the control group. CONCLUSIONS: These findings suggest that HBO accelerates bone formation by increasing the ATP levels of osteoblasts, and bFGF can act as a substitute for VEGF in vascularization by HBO application.

Occlusal Trauma and Bisphosphonate-Related Osteonecrosis of the Jaw in Mice.

Osteonecrosis of the jaw (ONJ) is a serious adverse event that is associated with antiresorptive agents, and it manifests as bone exposure in the maxillofacial region. Previous clinical reports suggest that mechanical trauma would trigger ONJ in a manner that is similar to tooth extractions. To the best of our knowledge, there have been few detailed pathophysiological investigations of the mechanisms by which occlusal/mechanical trauma influences ONJ. Here, we developed a novel mouse model that exhibits ONJ following experimental hyperocclusion and nitrogen-containing bisphosphonate (N-BP) treatment. This in vivo model exhibited ONJ in alveolar bone, particularly in the mandible. Moreover, the experimental hyperocclusion induced remarkable alveolar bone resorption in both mouse mandible and maxilla, whereas N-BP treatment completely prevented alveolar bone resorption. In this study, we also modeled trauma by exposing clumps of mesenchymal stem cells (MSCs)/extracellular matrix complex to hydrostatic pressure in combination with N-BP. Hydrostatic pressure loading induced lactate dehydrogenase (LDH) release by calcified cell clumps that were differentiated from MSCs; this LDH release was enhanced by N-BP priming. These in vivo and in vitro models may contribute further insights into the effect of excessive mechanical loading on ONJ onset in patients with occlusal trauma.

Effects of dimensions of laser-milled grid-like microslits on shear bond strength between porcelain or indirect composite resin and zirconia.

PURPOSE: Zirconia cores and frameworks are widely used in restorative dentistry. Although these structures are veneered with porcelain for esthetic reasons, the use of indirect composite resins (ICRs) is expected to increase in the future. The purpose of this study was to investigate the effects of microslits of different dimensions formed by Nd:YVO4 laser machining on the bond strength between two types of zirconia (3 mol% yttria-partially stabilized zirconia (Y-TZP) and ceria-partially stabilized zirconia/alumina nanocomposite (Ce-TZP/A)) and porcelain or an ICR. METHODS: The zirconia disks were assigned as follows: 1) blasted with alumina particles (AB) and 2-4) surface machined with gridded microslits with a width, pitch, and depth of 50, 75, or 100 µm (MS50, MS75, and MS100, respectively). After the bonding of the veneering materials to the disks, half of the specimens veneered with the ICR were subjected to thermocycling (4-60°C, 20000 cycles). All the specimens were subsequently shear tested (n = 10/group). RESULTS: There was no significant difference between the groups of the disks bonded to porcelain. On the other hand, for the disks bonded to the ICR, the bond strengths of the MS groups after thermocycling were statistically higher than that of the AB group. However, there was no significant difference in the bond strengths of the disks with different microslits. CONCLUSION: Within the study limitations, it can be concluded that, for porcelain, the design of the mechanical retentive structure must be modified. However, for the investigated ICR, a simple gridded pattern can improve the bond strength with zirconia.

Generalized periodontitis treated with periodontal, orthodontic, and prosthodontic therapy: A case report.

BACKGROUND: Generalized periodontitis is a severe periodontal disease characterized by rapid periodontal destruction in healthy persons. This case report describes the treatment of a severe crowding, large overjet, and occlusal collapse due to the loss of anterior guidance with generalized periodontitis. CASE SUMMARY: A 35-year-old female patient with a chief complaint of crowding and maxillary protrusion was diagnosed with generalized periodontitis by clinical and radiographic examinations. To improve crowding and overjet, orthodontic treatment was performed after basic periodontal therapy. Severely damaged upper right lateral incisor and left canine were extracted, and lower right first premolar and left second premolar were also removed to treat severe crowding. After orthodontic treatment, periodontal flap surgery for upper left molars and guided tissue regeneration for the lower left second molar was performed. Then, a dental implant was inserted in the upper left canine legion. The esthetics of the maxillary anterior tooth was improved by prosthetic restorations. The treatment result showed a well-improved occlusion with proper anterior guidance and healthy periodontal tissue after a retention period of 10 years. CONCLUSION: Periodontal, orthodontic, and prosthodontic treatments are extremely useful to improve function and stable periodontal tissue for generalized periodontitis.

Changes in tongue-palatal contact during swallowing in patients with skeletal mandibular prognathism after orthognathic surgery.

This study aimed to evaluate improvement of tongue-palatal contact patterns during swallowing after orthognathic surgery in mandibular prognathism patients. Thirty patients with mandibular prognathism treated by orthognathic surgery (average age of 27 years, 3 months) and 10 controls (average age 29 years, 6 months) participated in this study. Tongue-palatal contact patterns of patients before and three months after surgery were evaluated by electropalatography (EPG) as well as controls. Whole total of tongue-palatal contact at 0.3, 0.2, and 0.1 sec before complete tongue-palatal contact during swallowing were evaluated. The duration of swallowing phases was also examined. Complete contact of tongue-tip in the alveolar part of individual artificial EPG plate were shown at 0.3, 0.2, and 0.1 sec before complete tongue-palatal contact in the controls, although incomplete contact in the alveolar part were shown at 0.3 sec in mandibular prognathism patients. Whole total of tongue-palatal contact at 0.3 and 0.2 sec before complete tongue-palatal contact was significantly lower in the patients before surgery than in the controls (p<0.05). However, these values increased after surgery. The duration of oral and pharyngeal phase was significantly longer in the patients before surgery than in the controls and the patients after surgery (p<0.01). This study demonstrated that the tongue-palatal contact pattern improved and the duration of oral and pharyngeal phase was shortened in mandibular prognathism patients during swallowing after orthognathic surgery. It is suggested that changes in maxillofacial morphology by orthognathic surgery can induce normal tongue movement during swallowing. (The data underlying this study have been uploaded to figshare and are accessible using the following DOI: https://doi.org/10.6084/m9.figshare.14101616.v1).

Bonding and Thermal Cycling Performances of Two (Poly)Aryl-Ether-Ketone (PAEKs) Materials to an Acrylic Denture Base Resin.

Poly(aryl-ether-ketone) materials (PAEKs) are gaining interest in everyday dental practices because of their natural properties. This study aims to analyze the bonding performance of PAEKs to a denture acrylic. Testing materials were pretreated by grinding, sandblasting, and priming prior to polymerization with the denture acrylic. The surface morphologies were observed using a scanning electron microscope and the surface roughness was measured using atomic force microscopy. The shear bond strength (SBS) values were determined after 0 and 2500 thermal cycles. The obtained data were analyzed using a paired samples t-test and Tukey's honestly significant difference (HSD) test (α = 0.05). The surface characteristics of testing materials after different surface pretreatments showed obvious differences. PAEKs showed lower surface roughness values (0.02-0.03 MPa) than Co-Cr (0.16 MPa) and zirconia (0.22 MPa) after priming and sandblasting treatments (p < 0.05). The SBS values of PAEKs (7.60-8.38 MPa) met the clinical requirements suggested by ISO 10477 (5 MPa). Moreover, PAEKs showed significantly lower SBS reductions (p < 0.05) after thermal cycling fatigue testing compared to Co-Cr and zirconia. Bonding performance is essential for denture materials, and our results demonstrated that PAEKs possess good resistance to thermal cycling fatigue, which is an advantage in clinical applications. The results imply that PAEKs are potential alternative materials for the removable of prosthetic frameworks.

An Investigation of Tongue-Palatal Contact Changes in Patients With Skeletal Mandibular Lateral Deviation After Sagittal Split Ramus Osteotomy.

ABSTRACT: This study aimed to investigate the changes in tongue-palatal contact patterns in patients with mandibular lateral deviation by electropalatography (EPG) before and after sagittal split ramus osteotomy (SSRO). Ten mandibular asymmetry patients who underwent SSRO participated in the study. Tongue-palatal contact patterns for the production of /t/ and /s/ sounds were observed using EPG before surgery and 3 months after surgery, and the changes in EPG pattern were examined. The number of electrode contacts in the 2 vertical columns of the EPG plate was calculated both in the mandibular deviation side and the nondeviation side. The EPG patterns for /t/ and /s/ showed asymmetry before surgery but became normal after surgery. Before surgery, the number of electrode contacts in the 2 vertical columns in the mandibular deviation side was significantly lower than that in the nondeviation side and the normal participants during /t/ and /s/ articulation. However, the number of electrode contacts in the deviation side significantly increased after surgery. This study demonstrated that the tongue-palatal contact patterns for /t/ and /s/ articulation shifted to the direction of mandibular deviation and improved after SSRO.

Effects of hyperbaric oxygen treatment on calvarial bone regeneration in young and adult mice.

OBJECTIVE: The present study aimed to investigate the effects of hyperbaric oxygen (HBO) treatment on calvarial bone regeneration in young and adult mice. METHODS: Calvarial defects of 6.0 mm diameter were created in sixteen 3-week (young) and sixteen 32-week old (adult) mice. The mice were divided into two groups of eight animals each (HBO-treated and control). The 90-min HBO treatment at 2.5 absolute atmospheric pressure and 100 % oxygen was performed for five days a week for 12 weeks. After 2-weeks from the operation, micro-computerized tomography and video microscopy were used to evaluate the regenerated bone volume and microcirculation every two weeks. The protein concentrations of vascular endothelial growth factor (VEGF) and basic fibroblast growth factor (bFGF) in exudates of the calvarial tissue field were measured at 1, 2, 3, and 4 weeks after surgery. After 12 weeks, histochemical examination of regenerated calvarial bone was conducted. RESULTS: Regenerated bone was formed earlier in young mice than in adult mice treated with HBO. HBO stimulates angiogenesis in the periosteum around regenerated bone area in both young and adult mice at 2 weeks. VEGF concentrations in the calvarial tissue field were lower in the HBO group than in the control 1 week after operation, although bFGF were higher till the 2nd week in the HBO group than in the control. CONCLUSIONS: HBO accelerates bone regeneration earlier in young mice than in adult mice. In the HBO-treated group, bFGF expression was promoted at an early stage, although the expression of VEGF was inhibited.

Laser-Milled Microslits Improve the Bonding Strength of Acrylic Resin to Zirconia Ceramics.

Heightened aesthetic considerations in modern dentistry have generated increased interest in metal-free "zirconia-supported dentures." The lifespan of the denture is largely determined by the strength of adhesion between zirconia and the acrylic resin. Thus, the effect on shear bond strength (SBS) was investigated by using an acrylic resin on two types of zirconia ceramics with differently sized microslits. Micromechanical reticular retention was created on the zirconia surface as the novel treatment (microslits (MS)), and air-abrasion was used as the control (CON). All samples were primed prior to acrylic resin polymerization. After the resin was cured, the SBS was tested. The obtained data were analyzed by using multivariate analysis of variance(α = 0.05). After the SBS test, the interface failure modes were observed by scanning electron microscopy. The MS exhibited significantly higher bond strength after thermal cycles (p < 0.05) than the CON. Nevertheless, statistically comparisons resulted in no significant effect of the differently sized microslits on SBS (p > 0.05). Additionally, MS (before thermal cycles: 34.8 ± 3.6 to 35.7 ± 4.0 MPa; after thermal cycles: 26.9 ± 3.1 to 32.6 ± 3.3 MPa) demonstrated greater SBS and bonding durability than that of CON (before thermal cycles: 17.3 ± 4.7 to 17.9 ± 5.8 MPa; after thermal cycles: 1.0 ± 0.3 to 1.7 ± 1.1 MPa), confirming that the micromechanical retention with laser-milled microslits was effective at enhancing the bonding strength and durability of the acrylic resin and zirconia. Polycrystalline zirconia-based ceramics are a newly accessible material for improving removable prosthodontic treatment, as the bond strength with acrylic resin can be greatly enhanced by laser milling.

Effect of continuous compressive force on the expression of RANKL, OPG, and VEGF in osteocytes.

The present study aimed to investigate the effect of a compressive force (CF) on the expression of receptor activator of nuclear factor kappa-B ligand (RANKL), osteoprotegerin (OPG), and vascular endothelial growth factor (VEGF) in murine osteocytes (MLO-Y4) as well as animal study. After application of a CF for 1, 3, 6, and 12 h, gene and protein expression of RANKL, OPG, and VEGF in MLO-Y4 cells were determined by real-time PCR and enzyme-linked immunosorbent assay (ELISA). Furthermore, the effect of a stretch-activated (S-A) channel was examined by gadolinium (Gd3+) administration. In an animal experiment, the expression of these factors in osteocytes of alveolar bone was examined after experimental tooth movement in rats. After CF application, significant increases in RANKL, VEGF and RANKL/OPG ratio were shown. The upregulated gene and protein levels of these factors were reduced by Gd3+ administration. After tooth movement, upregulated RANKL and VEGF were imunohistochemically shown in osteocytes of alveolar bone. These findings suggest that CF application on osteocytes elevates expression of osteoclast-inducing factor and angiogenesis factor in vivo and vitro.

Correction of skeletal class II severe open bite with temporomandibular joint disorder treated by miniscrew anchorage and molar extraction: a case report.

BACKGROUND: Little information is available on the treatment of open bite with temporomandibular joint disorder by intrusion of molars using miniscrews. CASE PRESENTATION: This case report describes a 42-year-old Japanese woman with a skeletal class II severe anterior open bite and temporomandibular joint disorder. The pretreatment magnetic resonance imaging of both temporomandibular joints revealed osteoarthritis and anterior disc displacement without reduction in both temporomandibular joints. A stabilization splint was used before orthodontic treatment and bilateral upper and lower premolars were extracted. Miniscrews were inserted into the palatal region to intrude the maxillary molars and avoid loss of anchorage. The maxillary left first molar was also extracted to improve the molar relationship and the dental midline. Normal overjet and overbite with Angle class I molar relationship were achieved, and the upper and lower midlines coincided. Our patient's teeth continued to be stable and her temporomandibular joint was asymptomatic after a retention period of 2 years. CONCLUSIONS: Intrusion of molars by miniscrews is available for skeletal class II severe open bite.